Do I have to back up and restore before I get iOS 5?
I'm planning to get iOS 5 today, but I've looked at other posts on here and I'm wondering, can I just plug my iPad 2 in to my PC and update? Or do I have to back up, restore, etc?
You should just be able to update to iOS 5 by just plugging it in. And after you download iOS 5, no need to plug your ipad in to update! Yay for PC free!
Similar Messages
-
It started last month before I ungraded to iOS5. So my network provider advised me to upgrade. It fixed the problem but it happens again after several days. I lose signal then when I do hard reset, signal is back but I can't send or receive SMS or make and receive calls. But from the other end my phone is ringing but nothing is happening to my phone.This is really frustrating! Coz it happens weekly and the only way to fix it is to back-up and restore. Which is a hassle coz it takes me about 3 hours! Please help. My phone is still under warranty but the provider is telling me it might take them 3 months to check and fix.
I think there is a bug with the iOS5 coz it happen when it I upgraded. Before I was quite happy with my iPhone4 but now it has become a source of anxiety and stress. I've received a lot of complaints at work coz they couldn't contact me.Try to set it up as new device without using the last backup: How to back up your data and set up as a new device
-
I have forgotten my iPad password and tried to back up and restore my iPad but it says you need to unlock your device before you restore it but that is the whole reason I am trying to restore my iPad. Can anyone help?
Forgotten passcode or device disabled after entering incorrect passcode
-
How do I back up and restore my ipod touch if when i connect it to itunes It does not appear in the devices column? I have a white screen and have tried holding down the wake/sleep and home buttons and that is not working. Please help
Take it in for repair/replace to your local Apple retailer.
-
I have paid Bell to unlock my old iphone4 and they have said it is now unlocked. Can I skip the back up and restore process and just buy another carriers sim card from my daugther Kodoo plan, install it and active the iphone4 on itunes account in her name?
thanks
DaveThe process is as follows:
Backup the phone, Erase it, connect to iTunes for the unlock process, then your iProfile can be restored.
You can go ahead and get the SIM, bout you have to Erase the phone and connect to iTunes before it will be unlocked. -
hello, i have a first generation ipod and i lost the pin, i followed the instruction to back up and restore factory settings but in the middle of the process an unknown error occurred. how can i get my ipod working again with my backup files. please help
What was the complete wording of the error message? Usually an error number is also given.
Maybe:
ERROR (1)
- Place the iPod in DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Try on another computer
- Try another cable
- Also, confirm your security software and settings are allowing communication between your device and update servers.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Hi
I have been allowed to unlock my iphone recently by AT/T.
I want to keep my existing ios (5.0.1) as it is on my iphone now.
I've been told to back up and restore by itunes but I am worry of updating my ios to the latest version automatically.
Please let me know how to keep the existing ios during the unlocking process.
Thanks and nest regards
MohsenRestoring your phone, as is required to complete the unlock of your phone WILL update your iOS to the most current version. There's no way around this.
Either you keep 5.0.1 and a locked phone, or you get 6.0 and an unlocked phone. Your choice. -
I am having problems unlocking my iphone 5. I have received an email from my old provider confirming that the phone is being unlatched and I need to complete the process through itunes. I have backed up and restored but I have not received a message from itunes stating the phone is unlocked. Do I use the old or new sim card while connecting to itunes or does it not matter. I dont know what else to do to finish the unlock?
You can use either, but if you restored to the backup, then you will not see the message. You need to restore the device as new first, then restore the backup. Make sure you can continue with the unlock first. Many of the emails report, "Your unlock has been approved, restore your device in iTunes in 24 hours", or something like that. If it is ready to go, then as I said earlier, restore as new first, and then you should see the confirmation.
-
I have an iphone 4s and was restoring it from a back up and now all i get is and unknown error occurred (29) halfway through the restore. Any ideas on what I can do?
Your error is connect to hardware, try these steps to solve it:
Related errors: 1, 3, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer might have a hardware issue that stops the update or restore from completing.
Check that your security software and settings aren't blocking your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Make sure that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
copied from Resolve iOS update and restore errors -
I just updated my Iphone 4S to the new software. Ever since I did the update it has been searching for cell service and I am not able to make outgoing calls or get texts. I have tried to back up and restore but it keeps giving me the error message 3002. I tried to click on the error number but there is no info about it. Could someone help?? Thanks
After I upgraded to Mavericks I was also having this message when I tried to update. There was a previous post about this problem which offered this simple solution which worked for me:
b0n0b0
Re: Recently upgraded to Maverick from SnowLeopard. Unable to get updates from App store.
Mar 15, 2014 9:05 AM (in response to Terence Devlin)
Got it! Thanx. What I did was go to my account, check that they had my new ID and Password which they did, then hit reset button. All fixed. -
Backing up and restoring site definitions
Losing your site definitions in Dreamweaver can be a disaster, but it does happen sometimes. The best way to prepare for such an eventuality is to back up your site definitions on a regular basis.
Creating a backup
You can back up all your site definitions in a single operation by selecting Site > Manage Sites. In the dialog box that opens, Shift-click to select all site names, and then click Export.
In Dreamweaver CS6, the Manage Sites dialog box looks like this:
In earlier versions of Dreamweaver, it looks like this:
Dreamweaver asks if you want to include passwords and login details (this is the default option). Whichever option you choose will be applied to all sites, so click Cancel if you want to treat some sites separately, and export your sites in two sets by using Ctrl/Cmd-click to select them.
When you click OK, Dreamweaver asks where you want to export the definitions. Navigate to a suitable location, leave the File name field unchanged, and click Save. Although only one site name is listed in the File name field, Dreamweaver exports all the site definitions as .ste files in a single operation.
NOTE: This process backs up only the details of your sites, such as the location of the root folder, FTP details, and so on. It does not back up the actual files in your site, such as .html (or .php, .asp, .cfm) files, images, and style sheets. It's a good idea to use your normal file backup routine on your actual files from time to time, as well as exporting the site definitions.
Restoring site definitions
In the event of losing your site definitions in Dreamweaver or moving to a new computer, open the Manage Sites dialog box, and use the Import button to navigate to your backup .ste files.
What if I don't have a backup?
Often, if you don't have a backup of .ste files, you need to go through the whole process of re-entering the details for each site manually.
However, you might be able to restore them by using a restore point on Windows or Time Machine in Mac OS X.
On Windows, the site definitions for Dreamweaver CS6 are stored in the Windows Registry at HKEY_CURRENT_USER\Software\Adobe\Common\12.0\Sites.
In Mac OS X, they are at Macintosh HD:<username>:Library:Application Support:Adobe:Common:12.0:Sites:Site Prefs.
In recent versions of Mac OS X, the Library folder is hidden. In the Mac Finder, select Go > Go to Folder, type ~/Library in the search field, and click Go.
Dreamweaver CS5.5 site definitions are in the same location, except use 11.5 instead of 12.0. The numbers for CS4 and CS3 are 10 and 9 (without a decimal fraction) respectively. For earlier versions of Dreamweaver, substitute Macromedia for Adobe, and adjust the number accordingly.
If you don't have a backup of the actual files on your site, download the files from your remote server.Hello,
We are running iPlanet 5.2 Messaging Server and need
to migrate to another (duplicate) 5.2 Messaging
Server. We have all the software installed and the
LDAP user accounts created. Now we just need to move
the existing mail from one server to the other.
I found the Backing Up and Restoring the Message
Store section in the Admin Guide says to back up and
restore your data, Messaging Server provides the
imsbackup and imsrestore utilities.
However I am wondering about the Queue?
Under <instance>/imta/queue
What is the difference between the Message Store
and the Queue? The Message Store is where messages get delivered to, so you can read them.'
The queue is where messages are temporarily stored, pending delivery to wherever they go.
You can use tar, cpio, or what have you for the queue. Stop the server first. . .
You then just restore the files to the new server. No need to restart or anything like that. Just dump the files in, and run
imsimta cache -sync
to tell the MTA to re-read the queue.
Can I just backup and restore the
Queue using tar or cpio?
Thanks in advance for any advice.
Regards,
Tim -
Backing up and restoring X2 iphones - having conflict issues
Hi,
My wife and I have been using the 3gs for 2 years and have now upgraded ;-) I pluged mine into itunes and backed it up, then pluged in my new one and restored and it all works fine.
However when I tried to backup my wifes phone and then restored - it just restored as mine again, so we had 2 new phones with all my details on it!!
So I restored to factory setting on the iphone 4s
I have tried uninstalling Itunes and reinstalling but it still has my phones info on it.
Please can you tell me how to back up and restore my wire iphone and for it not to keep using my phones details ??
Thanks Chris.As long as you are NOT running a production application on Oracle's Hosted site.. You can't really run a scheduler job, since it would usually export stuff to your local server, but you don't have access to that on Oracle's site.. Unless you just want to build a form to output data from your tables, that would push the data down to your workstation, there is no other rel means.. Other hosting companies will allow you to use Sql Developer and such, but then again you are paying to use their site..
Thank you,
Tony Miller
Webster, TX
There are two kinds of pedestrians -- the quick and the dead. -
Backing Up and Restoring the Message Store v.s. the queue
Hello,
We are running iPlanet 5.2 Messaging Server and need to migrate to another (duplicate) 5.2 Messaging Server. We have all the software installed and the LDAP user accounts created. Now we just need to move the existing mail from one server to the other.
I found the Backing Up and Restoring the Message Store section in the Admin Guide says to back up and restore your data, Messaging Server provides the imsbackup and imsrestore utilities.
However I am wondering about the Queue?
Under <instance>/imta/queue
What is the difference between the Message Store
and the Queue? Can I just backup and restore the Queue using tar or cpio?
Thanks in advance for any advice.
Regards,
TimHello,
We are running iPlanet 5.2 Messaging Server and need
to migrate to another (duplicate) 5.2 Messaging
Server. We have all the software installed and the
LDAP user accounts created. Now we just need to move
the existing mail from one server to the other.
I found the Backing Up and Restoring the Message
Store section in the Admin Guide says to back up and
restore your data, Messaging Server provides the
imsbackup and imsrestore utilities.
However I am wondering about the Queue?
Under <instance>/imta/queue
What is the difference between the Message Store
and the Queue? The Message Store is where messages get delivered to, so you can read them.'
The queue is where messages are temporarily stored, pending delivery to wherever they go.
You can use tar, cpio, or what have you for the queue. Stop the server first. . .
You then just restore the files to the new server. No need to restart or anything like that. Just dump the files in, and run
imsimta cache -sync
to tell the MTA to re-read the queue.
Can I just backup and restore the
Queue using tar or cpio?
Thanks in advance for any advice.
Regards,
Tim -
i generally back up and restore my phone every week.. just that i dont have any problem with the network issues. !!
today at 00:46 1st june.. i backed up my iphone and it was perfect...
when i try to restore it.. it is taking 15+ hours .. and that time stays like that for almost 3 hours... it does not happen.
i even called the apple help center. and they said me to install as a new device... and when i said what wil happen to my messages.. they say .. they wont stay.. and wil be deleted.. and all my apps i need to download again..
but earlier i din need to do any of it.!!! it worked really fine .!!!
please help me..!!! i got some important details in this back up.... please help me.!!!Once in a while the restore process seems to mess up. What I don't understand is why you would perform a weekly restore.
At any rate, if you must restore, perform a device reset (settings>general>reset) and then you will have the opportunity to restore from iCloud. Restore a device whenever it no longer works correctly, not just as a matter of maintenance. If it ain't broke, don't fix it. -
My IPhone 5, was backed up and restored. Music doesn't sync, when reconnecting device each time, it only offers restore or new phone rather than sync option. I have reinstalled ITunes but still this hasn't worked. Can anyone help please?
This problem started last year when ios 8 was released. I think apple is trying to force users to buy music on iTunes store and that's why it's impossible to sync other music and also that's the reason why they haven't solved this serious problem. That's really disappoints me and i'm angry with apple because i have like 10 gb of music in mp3 and i can't sync music from iTunes to my iPhone.
Maybe you are looking for
-
I am getting error in an top of Base navigation page while signon....
Java Exception: java.lang.UnsupportedClassVersionError: Bad version number in .class file: finding basic class PeopleSoft.PeopleCode.Name (2,727) PT_FAV.AddToFav.OnExecute Name:getPTISSID PCPC:12703 Statement:248 Called from:PT_FAV.AddToFav.OnExecute
-
Please help about Custom View fo EditorKit
Thank You for reply TextArea in Visual Studio .NET is somehow displayed like that. - public class Test{ | | + public Test(){ | | .... | _ } | | + public int load(){ | | ...... | _ } | and if u press + symbol, method code is displayed. thats why i wan
-
Help! My DVD drive wont work when i install iTunes....
I Installed iTunes when i bought my iPod, but my Disc drive wont read any cd's when iTunes is installed. I uninstalled iTunes 4 times now and every time i uninstall iTunes amizingly my disc drive works again. When iTunes is re-installed it wont read
-
How change decimal separator from . to ,
Hi I need change the decimal separator from . to , and apply ZZZ.ZZ9,99 thanks
-
Hi. When I want to open firefox, gives me this message "firefox uygulamasının önceki yükseltme işleminin tamamlanması için bilgisayarınızı yeniden başlatılmalı. Şimdi yeniden başlatmak istiyormusunuz?" I did it so I restart pc but it didnt. Pc is ask