Do i have to charge my replacement macbook pro batter for a certain amount of time before using the computer?

do i have to charge my replacement macbook pro batter for a certain amount of time before using the computer?

First, if you have a Late 2008 or older MacBook Pro, you should calibrate the battery, as the battery for these MacBooks don't come precalibrated > http://support.apple.com/kb/HT1490?viewlocale=en_US&locale=en_US
Then, the battery should come charged, so use it until the battery percentage is low, and then, charge it. You can use your Mac while your battery is being charged, and your MacBook will stop charging the battery when your battery is full, so you can unplug it at any moment

Similar Messages

I have a very old (by computer standards) MacBook Pro, and a newer one. I've been using the old one mostly for iTunes, into which I have only CD entries. For a long time, years, the old MacBook pro ceased entering the song titles. This is very time con

I have a very old (by computer standards) MacBook Pro, and a newer one. I've been using the old one mostly for iTunes, into which I have only CD entries. For a long time, years, the old MacBook pro ceased entering the song titles. This is very time consuming for me, so I finally investigated a bit further.
I discovered how to enter the track titles onto my newer MacBook Pro, and was so pleased! But when I tried to do the same with the other laptop, it failed.
What I did, basically, was what the Apple Help suggested--choose iTunes General Preferences, etc.etc. And yes, I did upgrade the old laptop to the newest iTunes version.
Am I just wasting my time here? Is there some reason why an older Mac Pro will not do what the newer one will, with regard to iTunes?
My older laptop is a 2.6 GHz Core Duo; it has 36 GB of "memory available." The newer one a 2.3 GHz Intel Core i7. It has 284 GB of memory available.
Both are using the same version of Snow Leopard--10.6.8.

I have a very old (by computer standards) MacBook Pro, and a newer one. I've been using the old one mostly for iTunes, into which I have only CD entries. For a long time, years, the old MacBook pro ceased entering the song titles. This is very time consuming for me, so I finally investigated a bit further.
I discovered how to enter the track titles onto my newer MacBook Pro, and was so pleased! But when I tried to do the same with the other laptop, it failed.
What I did, basically, was what the Apple Help suggested--choose iTunes General Preferences, etc.etc. And yes, I did upgrade the old laptop to the newest iTunes version.
Am I just wasting my time here? Is there some reason why an older Mac Pro will not do what the newer one will, with regard to iTunes?
My older laptop is a 2.6 GHz Core Duo; it has 36 GB of "memory available." The newer one a 2.3 GHz Intel Core i7. It has 284 GB of memory available.
Both are using the same version of Snow Leopard--10.6.8.

I have an iMac with Microsoft Office and an HD - Time Machine. I'm buying a MacBook Pro and I want to know that if I use the Time Machine to transfer all my stuff the Microsof Office will work or if I need to reinstall it with another licence ?

I have an iMac with Microsoft Office (and several other licenced softs) and an HD - Time Machine that backup all the stuff. I'm buying a MacBook Pro and I would to know that if I use the Time Machine to transfer all my stuff, the Microsof Office will work normally or if I need to reinstall it with another licence?

You do not need a new license. The license file will be found in /Library/Preferences/ and is named, com.microsoft.office.licensing.plist. Be sure it gets transferred and you will be fine. I see no reason why the file would not be in your Time Machine backup nor any reason why it would be restored.
Please visit Pondini's Time Machine FAQ for help with all things Time Machine. You may need help figuring out how to restore your current backup to a new machine.

I have installed CS5 on a macbook pro 10.9.4. I am unable to get the updater to run to update applications to most current version. It tells me there was an error trying to download the update and to try again later.

I have installed CS5 on a macbook pro 10.9.4. I am unable to get the updater to run to update applications to most current version. It tells me there was an error trying to download the update and to try again later.

Getting used to changes in the finder. I finally did see the Adobe Patch installer and am able to update applications individually. Should be able to attend to the main apps I use w/o further difficulty. Thnx for the help.

When I try to update my apps on my MacBook Pro, Ipad, and Ipod it wont allow me. On the computer it says theres and error. (11111) But on the Ipod and Ipad it starts to update and completely stops. What should I do?

When I try to update my apps on my MacBook Pro, Ipad, and Ipod it wont allow me. On the computer it says theres and error. (11111) But on the Ipod and Ipad it starts to update and completely stops. What should I do?

Maybe this.
Fix iPhone Apps Stuck "Waiting" During Installation
Try update the apps one at a time

Imac have black screen. Start Computer sound come on, no picture. The last time I used the computer I put it to sleep, it never came back. i tried everything that was suggested including puting in the start up disk. The disk would not eject. Some one

Imac have black screen. Start Computer sound come on, no picture. The last time I used the computer I put it to sleep, it never came back. i tried everything that was suggested including puting in the start up disk. The disk would not eject. Some one suggested how to remove it and that did work. Computer going to Apple hospital Tues. July 3, thank you for all the suggestions.
Phyllis33

There is nothing wrong with the OS update.
Delete ALL your email accounts.
Restart Playbook
Put the accounts back and ensure they are all set with PUSH ON. Manual (push off) will burn battery.
Similarly delete your wifi connections and add back when required.
Turn off wifi is not connected to wifi.
Any "hunting for connection" in email or wifi will burn up battery.

When i plugged in my ipod charger into my macbook pro it off instantly and wouldnt turn back on, also the charger displays a dim green light when connected to the mac. Does anyone have a sollution to this problem?

When i plugged in my ipod charger into my macbook pro it turned off instantly and wouldnt turn back on, also the charger displays a dim green light when connected to the mac. Does anyone have a sollution to this problem?

The dim green light appears to be flashing orange too

HT1338 I am trying to download java onto my macbook pro, but for some reason this function isn't recognizing the internet. The error message insists that I am not connected but I am. I have tried this through both safari and firefox

Sorry I didn't realize the above was just a subject line.
I have been trying to download java for my macbook pro, but for some reason the function is not recognizing the internet. I am on and have checked several times .... I have checked through both safari and firefox but to no avail. Thanks for any help anyone can give.

Not really a reply just some added info:
This is the error message I get saying the internet is not on, but clearly as I can send this message it has to be:
To open “Java Preferences,” you need to install a Java runtime, but you are not connected to the Internet.
I am connected through Wi-fi if that makes a difference.

I have a Thunderbolt iMac 27" with a Thunderbolt Display attached. I would like to use the iMac and Thunderbolt display in Target Display Mode for my new Thunderbolt MacBook Pro. So far, it seems I can only use the iMac screen itself. How do I do this?

When I press the Command + F2, the iMac screen becomes a secondary for the MacBook Pro, and the Thunderbolt Display becomes the primary screen for the iMac. I was hoping that both screens would become secondaries for the MacBook Pro. Does anyone know how I should proceed? I have tried to connect the Thunderbolt display directly to the MacBook Pro, and the iMac to the Thunderbolt Display via the separate Thunderbolt cable, but there was no difference. And since the MacBook Pro only has the one Thunderbolt port, I'm not sure how to proceed.

Yes, eww, the language definitely states two thunderbolt displays, but I can understand the confusion and was siding with how they could make the mistake to think it would work like they want it to. My appologies for not being clear on that point, but I think you make it clear that the language in the ad says nothing about an imac.
Having said that all the language about TB would suggest that this would be possible. http://www.apple.com/thunderbolt/
High performance on display.
Thunderbolt I/O technology provides native support for the Apple Thunderbolt Display and Mini DisplayPort displays. It also supports DisplayPort, DVI, HDMI, and VGA displays through the use of existing adapters. So you can connect your Apple LED Cinema Display or other display, along with multiple high-speed devices, all from a single port.

I have a new Macbook pro, about 2 months old, and at times running video, the fans starts and does not stop. how do you get it to stop.

I have a new Macbookbook, about 2 months old, and at times running video, the fans starts and does not stop. how do you get it to stop. Also i am thinking once the video is done the fan should be slowing down and getting quiet on its own.

Your fan(s) will run at high speed (i.e., loudly) while video is playing, and you can't get around that.
If your fans are not slowing down within 2-4 minutes after CPU- and/or GPU-intensive usage ends, and the application that was showing the video is still running, Quit that application. (In fact, if you're accustomed to Windows, you may not realize that simply closing a Mac application's window does not quit the application. You still need to use the Quit command in the application-name menu. There will always be a bright dot beside or below the application icon in your Dock for each application that is open.) Quit the ones you aren't using, and see whether that allows the fans to slow down without restarting the machine. If that doesn't do the trick, reset the SMC:
http://support.apple.com/kb/HT3964?viewlocale=en_US&locale=en_US

I have a mac mini server with leopard, macbook pro, imac and iphone 4 i would like to use the server as the host for all mail, contacts, directories, intranet etc i would like all devices to have mail pushed using outlook as the prefered mail client?

can anyone shed some light on how to do this i am currently using the server as a file storage system but feel it can deliver far more; ideally i would like the following;
email to push to all devices once sent form one device all devices have a copy of the sent item
accounting software that is shared on the server
access the files and directories securely form anywhere
create and host an intranet site
any ideas of how to setup easily or step by step guides
help would be greatly appreciated
regards
rd

Start by getting DNS properly configured. If DNS isn't properly configured, most other services won't work right.
http://labs.hoffmanlabs.com/node/1436
http://labs.hoffmanlabs.com/node/1594
Then, the OS X server documentation will provide a wealth of knowledge on configuring services.
http://www.apple.com/server/macosx/resources/documentation.html

HT3964 My MacBook Pro i5 Dual Core has a hardtime waking up when the computer is put to sleep and only when it goes to sleep and has been asleep for a while. The indicator light flashes on and off for a while and then freezes. I've done an SMC reset once.

Does any one have the same problem with their MacBook Pro i5 Intel Dual Core? If the computer goes to sleep (not the screen) and is asleep for a while, when I try to wake it up it doesn't respond. I have to power it downn and restart it and sometimes it takes two or three attempts. Otherwise it works fine. I upgraded the memory to 8 GB. That is the only alteration doen to it. I've performed one SMC restart and now it wakes up but it takes a while and a gray screen shows up. When I insert a DVD it won't start automatically I have to start the application in order to see it. Any suggestions?

http://www.apple.com/support/macbookpro-videoissues/

How can i transfer data from old MacBook Pro, which is too old to update time machine, to the newest MacBook Pro?

I recently bought a new MacBook Pro, and wanted to transfer all the data from my old MacBook Pro, but I get the message saying I need to update time machine on my old one in order to use time machine. However, my old one is too old to update. So I decided to use the cable to transfer, because I heard I can do it that way even though it could take time. But I have no idea what to do...
Can someone help me?

A Basic Guide for Migrating to Intel-Macs
The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC System Preference add-ons
All Unsanity Haxies Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5 Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior, TechTool Pro , SuperDuper , and Drive Genius work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
OS X Lion: How to use Migration Assistant to transfer files from another Mac
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
Repair the hard drive and permissions using Disk Utility.
Backup your data. This is vitally important in case you make a mistake or there's some other problem.
Connect a Firewire cable between your old Mac and your new Intel Mac.
Startup your old Mac in Transferring files between two computers using FireWire.
Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
MacBook Air- Migration Tips and Tricks;
MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder) /Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder) /Home/Library/Mail (copy the whole folder) /Home/Library/Preferences/ (copy the whole folder) /Home /Library/Calendars (copy the whole folder) /Home /Library/iTunes (copy the whole folder) /Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data Also in /Home/Library/Preferences/Microsoft.
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.Revised 5/21/2011

Retina MacBook Pro fan very loud and usb mouse disconnecting when restarting the computer

2 days ago, I got a brand new retina MacBook Pro 13 inch with the specs 2.8 GhZ i7, 8 gigs of ram and 512gb ssd. It should definitely be functioning properly since it's a really expensive computer, but I already noticed a few problems that I hope you can help me with.
So first of all, when I play World of Warcraft, the fan seems to go up to 6000rpm and is very loud. I checked the activity monitor and it says WoW is using about 60% CPU, so it shouldn't have to be that loud. I also installed smcfancontrol, but it doesn't seem to lower the speed of the fan.
I ran an apple diagnostics test and it couldn't find any problems, and I also tried resetting my smc, but the fan is still going very loud.
And the second problem I have is, that when I have my mouse usb connected to my Mac, and I restart it, it can't detect the mouse anymore. So I'd have to pull out the usb plug and put it back in everytime I turn on my computer. isn't it supposed to automatically connect to my mouse when it's already plugged in?

Matt,
Try reading this, then go to the section on Resetting the SMC for a Macbook Pro with a battery you should not remove.
http://support.apple.com/kb/HT3964

I bought a usb power adapter for my ipod nano so I can plug inti a power outlet. Will this take less time to charge my ipod or same amout of time if using the computer?

I bought a USB power adapter for my ipod nano so i can take it camping and use an outlet. Will this take less time for charging or the same amount as the computer?

Hi, Atcandela.
I've a Macally external fire/usb enclosure that powers up and mounts directly on to my PB Aluminum 1.67 laptop but the USB portion doesn't draw power.
Do you mean it mounts and works OK when connected via FireWire, but not when connected via USB? If so, that's unsurprising. I would be surprised to hear that it doesn't mount when you use the FireWire connnection, because most drives are able to get enough power from that port.
Does MacAlly not offer a cable for your drive that allows it to draw power from both your USB ports? Some manufacturers of external drives or enclosures do offer such a cable, and it's well worth buying because it's much smaller and more portable than an AC adapter. Have a look at this one from Western Digital — it might fill the bill for you.

Do i have to charge my replacement macbook pro batter for a certain amount of time before using the computer?

Similar Messages

Maybe you are looking for