Do I have to deactivate my lightroom 5 installation before moving it to a new hard drive as with Photoshop elements 10?

I cannot find any way to deactivate my Lightroom 5 install prior to moving it to another hard drive like I did on my Photoshop Elements 10 .

There is no activation/deactivation process with Lightroom. Just install it on the new hard drive. You might need your serial number.

Similar Messages

New Hard Drive Wiped Out Photoshop and Have Tried Reinstalling but it Hasn't Worked

I have a license for photoshop CS5. I recently had a new hard drive installed on my computer. When it was installed, it wiped my photoshop off. I've tried to re-install with the disk/serial #, but the disk pops out every time I put it in. What can I do here? Any help is greatly appreciated.

download the installer and simply input your serial number during installation:
Download CS5 products

TS1591 I have an iPod Nano generation six, and since I had a new hard drive installed in my Macbook Pro, iTunes does not recognize it. I have followed all the troubleshooting tips, many times, and nothing works. My other devices are recognized.

I have an iPod Nano generation six, and since I had to get a new hard drive on my Macbook pro, the nano no longer registers in iTunes. My other devices show up fine. I have followed all the trouble shooting advice,and nothing works.

This is the ipod touch forum

I did not deactivate a photoshop cs6 before there was a new hard drive installed with a Win7 Pro fresh install too. How can I activate photoshop on the new hardware if I can't deactivate it on the old hardware that is no longer available? Any help will be

I did not deactivate a photoshop cs6 before there was a new "C" hard drive installed on my computer and a Win7 Pro fresh install too. How can I activate photoshop on the new hardware if I can't deactivate it on the old hardware that is no longer available? Any help will be appreciated.

If it's the same machine (same CPU) there should not be any need to activate. The actiovation is tied to your CPU.
If you run into problems, then:
Unfortunately, only Adobe customer service can assist you with your issue. These are user forums; you are not addressing Adobe here.
Click on the link below, and after that click on "Still need Help? Contact us."
Then on the next page, click Chat
There is also a phone option. 1 (800) 833-6687
http://helpx.adobe.com/contact.html?step=PHXS_downloading-installing-setting-up_licensing- activation

Fresh Snow Leopard Installation on new hard drive & Leopard iLife

I have an early 2009 MBP that came with Leopard 10.5 and upgraded to Snow Leopard. I bought a new hard drive and will need to reinstall OSX. I've read it's possible to perform a fresh install of Snow Leopard without first installing Leopard from the backup disks.
1) Is this true?
2) I've heard a fresh Snow Leopard install will not install iLife. Can I reinstall iLife from my Leopard backup disks (that came with the MBP)?
3) Anything else I should know before installing everything in the new hard drive?
Many thanks!

1 True
2 True. You should be able to re-install it from the DVD that came with your computer.
3 You should be fine If you have a drive enclosure, you might be able to plug it in and use that to transfer all your stuff from the old drive to the new one.

My Mac crashed. I got a new hard drive. I reinstalled Lightroom. Fortunately ircats are stored on an external drive. How do I import all of the old catalogues from external drive into a new LR catalogue. I have done it before. It has just been many years

My Mac crashed. I got a new hard drive. I reinstalled Lightroom. Fortunately ircats are stored on an external drive. How do I import all of the old catalogues from external drive into a new LR catalogue. I have done it before. It has just been many years and I can't recall how.

If you had stored your catalog files on an external drive, then all you have to do is double-click on them to open them and use them.
Or you could move them to the internal drive and double-click on them once the move is completed.
To create a single catalog file from multiple ones, you could use File->Import from Another Catalog

HT201269 I have my iTunes library on my Windows 7 machine on an external hard drive. I purchased a new Macbook and would like to point my new machine at my iTunes library without losing anything and then deactivate iTunes on the Windows machine, help ple

I have my iTunes library on my Windows 7 machine on an external hard drive. I purchased a new Macbook and would like to point my new machine at my iTunes library without losing anything and then deactivate iTunes on the Windows machine, help please

Sorry, but this does not seem to be an iPad question. I'd therefore suggest you ask in the iTunes for Mac forum.
Regards.

My hard drive crashed and I lost everything on my Mac desk top, including my Adobe Lightroom. I had my hard drive replaced but how do I download to my new hard drive? I have my previous serial number but when I entered that, it said it was invalid.

My hard drive crashed and I lost everything on my Mac desk top, including my Adobe Lightroom. I had my hard drive replaced but how do I download to my new hard drive? I have my previous serial number but when I entered that, it said it was invalid.

Lightroom - all versions
Windows
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
Mac
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh
Contact Adobe Support by chat for serial number issues:
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

Do I have to activate AHCI mode on a Mountain Lion after a new SSD drive installation?

Hello All,
Do I have to activate AHCI mode on a Mountain Lion after a new SSD drive installation?
I have a new Corsair GT SSD sata 3 drive on my mack book, I have read on corsair web page that is good tho activate the AHCI and TRIM but I cant find information about how to do this on OS X.
Thank you all

That's information for non-Apple hardware. You can activate TRIM using third-party software: TRIM Enabler 2.2. However, most new SSDs should not need TRIM activated on the Mac.

Problems installing OS I have an iMac 21.5 (Mid-2010) and in trying to load a new hard drive, after choosing the installation disk the apple logo comes up and then stops and the keyboard and mouse goes dead. Any help would be appreciated. Thanks

Problems installing OS
I have an iMac 21.5 (mid-2010) and I'm trying to install a new hard drive. When I choose the installation disk the Apple logo comes up and it stops there. Then the mouse and keyboard goes dead. I'm trying to install 10.6. Any help would be appreciated. Thanks

Since you have a new hard drive, there is nothing on it, so you need to boot from an external source (and probably format the hard drive before installing an OS). Are you booting from the 10.6 install disk? Better yet - do you have a bootable backup clone or at least a Time Machine backup?

New hard drives I have registered lightroom license codes , how do I reinstall ?

New hard drives I have registered lightroom license codes , how do I reinstall ?

You may download the correct version from below link and install it
Adobe - Lightroom : For Windows
Adobe - Lightroom : For Macintosh

Since installation of a new hard drive on my mac book pro, clicking is now very difficult as I have severe arthritis in my hands. Is it possible to alter the pressure required?

Since having a new hard drive installed on my Mac Book Pro it has become very hard to click since I have severe arthritis in my hands. Is it possible to have the pressure required reduced to make it more comfortable?

I don't think there is any adjustment for that. The battery is under the trackpad. Did you have the HDD replaced at an Apple repair facility?
You may want to ask them to look at it and explain that it is harder press than before, maybe the battery is not nested correctly.
Here is a list of keyboard shortcuts which may help to reduce the amount of clicking that you have to do.
http://support.apple.com/kb/HT1343
All the Best

I have adobe CS6 on my old hard drive and i wish to transfer it over to my new hard drive. I no longer have the disc which it came on. How do I do this? also i have only ever put a single copy on a laptop and it is alowed 2........if that matters.

I have adobe CS6 on my old hard drive and i wish to transfer it over to my new hard drive. I no longer have the disc which it came on. How do I do this? also i have only ever put a single copy on a laptop and it is alowed 2........if that matters.

deactivate (help>deactivate) on your old hd.
then install using the installation file(s) and your serial number.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

Have Old Hard drive and want to move old data onto new hard drive in imac.

I am trying to get my files off of an old hard drive. I have it hooked up through a sata drive. I am able to access all the programs but for whatever reason I am unable to access any of the files, i.e- 1,00's of pictures, videos, music, and documents. Is there something else I need to do in order to get the files, or is it possible that all the programs could still be on it but the files are just missing? In the current Sata it only has two plugs but on my hard drive it looks like there is another place to plug something in.

Hello again Shadow,
The way I do this is to:
1) Install your new hard drive into your iBook
2) Get your iBook reassembeled
3) Place your old hard drive in your firewire enclosure
4) Insert your install DVD into your iBook and restart with the C key held down. When the installer launches, select your language in the first pane, click 'continue' and in the upper dropdown menu in the next page select Utilities > Disk Utility. After DU is open, select your hard drive from the list of volumes on the left (the very top one), and then click the 'Partition' tab to the right. Then select 1 partition (normal) and make sure that you have 'Mac OS Extended (journled)' selected in the lower section. Then click 'partition'
5)Quit disc utility, which brings you back to the installer. continue with your installation of OS X. In one of the first steps you will see a button on the lower left which says 'options' click on that and make sure that the option 'Installs OS X for the first time' is selected. It will normally be selected by default with a new drive.
6) After the installation, the Migration Assistant will ask if you would like to transfer your information from another mac. click yes then follow the instructions. but instead of using another mac, connect a firewire cable from your enclosure with your old hard drive installed. The installer will think that this is another mac and will transfer all of your account information and user files (everything!)from your old drive to your iBook's new drive. Just diconnect when it says to and complete the installation sequence.
You're done!
Check back again if anything is unclear.
Randy
Message was edited by: DesertSage

I have Photoshop CS5 as a download that I wish to put on a new hard drive I bought for my computer. I have he serial number for the download, How do I install it on my computer?

I have Photoshop CS5 as a download that I wish to put on a new hard drive for my computer. I have the serial number. How do I do it?

start your installation file on your new hd.

Do I have to deactivate my lightroom 5 installation before moving it to a new hard drive as with Photoshop elements 10?

Similar Messages

Maybe you are looking for