Do I have to eject my Iphone 5 when charging via USB?

I know pulling my older shuffle out of the dock (without using eject button) can create a need for a reset, but can I just unplug my Iphone 5 without using the powering on the monitor and hunting down the eject button after I have been simply charging?
A step further, if I actually sync'd the Iphone to add media and I know the sync is long done, do I still have to power on my display and hunt down that eject button?
Just trying to establish proper habits for the daily future use.  Thanks for any replies.

Well, I know it couldn't hurt (properly ejecting) but I am looking for a definitive answer of "yes" I have to do this and this is why.  Thanks for your answer, but powering on my display (HDTV) takes 30 seconds and doing this twice a day for two years will really take the life out of the display when I might not need to.  Not trying to be argumentative, just want to find something more official and couldn't find it on the site.  Thank You

Similar Messages

  • My new computer with Windows 8.1 does not recognize my iPhone when connected via USB.

    My new Dell Computer with Windows 8.1 does not recognize my iPhone 5 when connected via USB.  I have reinstalled iTunes to no avail.

    Hey, I may have to if I can't get this one to work!!
    I have tried a different USB to no avail.  Both cables work on my old Dell so I don't believe they are the issue. 
    I uninstalled iTunes as directed by Apple Support and reinstalled.  Apparently, Apple Mobile Device Support is not loading with it because it does not show up in programs. 

  • IPhone not charging via USB

    I just got this weird problem today. I have a 2G iPhone running 2.2
    1. iPhone is not charging with the USB cable to my MacBook and not recognizing by iTunes, thus I can't sync anymore.
    2. I can use the same USB cable to charge the iTouch from my MacBook
    3. I can use the same USB vable to charge the iPhone charges via the wall adapter, so this can not be the USB cable.
    4. I can use the same USB cable for the iTouch and I see it in iTunes
    So, this is not the USB cable nor iTunes. However, if this is hardware issue with the iPhone with charging, how come I can charge it using the wall adapter??
    This is very very strange indeed. Would it help if I do a hard reset on the phone? If so, how do I do that as I can not find anything on hard reset in the manual.
    help!

    I have two USB cables, one for the iPhone and one for the iTouch. Both cables do not work for the iPhone but they work for the iTouch.
    Also, I can use both cables to charge the iPhone from the wall charger. My problem is the iPhone does not seem to charge with the same cable plugging into my MacBook and iTunes does not see the device.
    My last sync with iTunes was yesterday. This problem just started today. I did a hard reset on the iPhone, no luck.

  • HT4759 I bought an audio book and downloaded it to my iphone...i dropped the phone in water and i have received a different iphone when i go to itunes it doesnt show my purchase.  I have the receipt number in my email how do i retrieve it??

    I bought an audio book and downloaded it to my iphone...i dropped the phone in water and i have received a different iphone when i go to itunes it doesnt show my purchase.  I have the receipt number in my email how do i retrieve it??

    At the present time, audiobooks are a one-time download and cannot be redownloaded again for free.  You can try contacting the iTunes store to see if they would grant you an exception: http://www.apple.com/emea/support/itunes/contact.html.

  • Iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB

    iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB.  I already tried uninstalling and reinstalling iTunes....still nothing.  Any ideas?

    Thank u verrrrrrrrrrry much FoxFifth u save my life thank u.

  • I can't use my iPhone when charging.

    I can't use my iPhone when charging.

    markfromnewyork wrote:
    From my experiences with the same problem, I can tell you that it seems to only happen when the transformer is running on a modified sine-wave.
    What do you mean by that?  A "dirty" source of power where there are a lot of transients on the AC line?

  • IPhone 4s. IOS 7.1.1 Windows 7. Using same lead and usb socket. From yesterday my phone won't appear on computer. Will charge via usb lead. Dont have iTunes on this computer and never had.

    iPhone 4s. IOS 7.1.1 Windows 7. Using same lead and usb socket as always. From yesterday my phone won't appear on computer. Will charge via usb lead. Dont have iTunes on this computer and never had. Am now being asked if I trust this computer. This is new. Also takes longer than usual to signal it is charging. Get usual sound notification but nothing appear in computer. I long ago disables automatic notification that phone was connected. Prefer to bring it up manually.

    Within Contacts, tap Groups at top left. Make sure all contact groups are checked to show, then tap "Done" at top right.
    Within the Calendar app, tap Calendars at the bottom center of the screen. Tap on Show All Calendars.

  • How can I turn off charging via usb of my iphone 4s when I connect it to my computer?

    how can I turn off charging via usb of my iphone 4s when I connect it to my computer?

    You cannot.
    Why would you want such a thing?

  • Get "using too much power" message when charging with USB

    I have a 4th gens iPod Touch that appears to have a number of issues:
    1. get "using too much power" message when charging with USB
    2. can't re-boot
    3. unable to access iCloud Backup, Ignore and Settings button inactive
    4. unable to unlock unit when using the Home button to turn the unit on

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                                                       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Mac pro does not recognize ipad device when connected via usb port, suggestions?

    mac pro running os 10.6.8 does not recognize ipad device when connected via usb port, suggestions?  itunes 10.7

    Here's a troubleshooting assistant: http://www.apple.com/support/ipad/assistant/itunes/
    The most likely issue:  Have you plugged your iPad into a USB port that is not directly part of your MacBook Pro?

  • I have a Canon LBP5360 laser printer connected via USB cable to my MacPro running 10.6.8  I have downloaded the latest UFR2 divers. I am trying to connect to the printer but the printer is not showing appearing in Print

    I have a Canon LBP5360 laser printer connected via USB cable to my MacPro running 10.6.8 
    I have downloaded the latest UFR II driver. (UK Version)
    I am trying to connect to the printer but the printer is not  appearing in my Print/Fax Preferences.
    When I click the box "More Printers" under the Default printer the drop down box gives me a heading "Canon IPv6 (UFRII) with the option to add or cancel. (The add is highlighted). But there are no printers showing in the box. Nothing. Can anyone help?
    Is there a problem with my Mac setup or maybe a setting in my printer?

    Mac UFR II Printmonitor
    UFR II Printmonitor is application software that interfaces with the software for the printer, and is installed with the printer driver. You can start UFR II Printmonitor in the following folder to check the printer status, and errors. Refer to the Help how to use the Print Monitor.
    MF3010, MF8000 Series, MF8000C Series, MF8300 Series, MF8300C Series:
    Print Monitor: [Library] - [Printers] - [Canon] - [CUPSCMFP] - [Utilities]
    Other Printers:
    Print Monitor: [Library] - [Printers] - [Canon] - [UFR2] - [Utilities]

  • How can i use my pc internet on my iphone 4 (ios7) via usb?

    hallo everyone,
    i want get internet from pc on iphone. how can i use my pc internet on my iphone 4 (ios7) via usb? (not iphone internet on pc). help me please

    That is actually pretty easy.
    Ensure that Bluetooth is enabled on your phone.
    Right mouse click on the Bluetooth system tray icon and select "Add new connection"
    Select your phone ..
    Enter a pincode e.g. 0000
    Enter the same pincode on the phone side as well.
    Click in the "Advanced Modem settings window the "Advanced Modem Settings" button. There should be a string which was auto detected.
    Just confirm the windows until the setup is finished. Open the IE confirm select the just configured DUN connection and browse the internet.
    You need to enter the Advanced modem string manually if it could not be detected. In this case you have to check your ISP website in order to
    find the suitable GPRS or HSDPA string, phone number, username and password for a proper setup. If you enter the wrong data you will encounter
    a connection failed error message.

  • How can I transfer photos from LG phone to mac notebook.  Phone appears in iPhoto when connected via USB but selection for download shows 0 photos

    How can I transfer photos from LG phone to mac notebook.  Phone appears in iPhoto when connected via USB but selection for download shows 0 photos

    Just open your LG volume up likes its an external HD and drag all photos onto a folder in your macbook Air.

  • Can I use iphone in BMW via usb interface for phone call and ipod functions

    Can I use iphone in BMW via usb interface for phone call and ipod functions

    Why don't you check the manual for your car or ask your dealer?

  • My iPhone 5 suddenly stopped getting charged via USB port.

    Does anyone know how to reset this so I can start charging via USB port again?

    Hello beenafromgbr,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Troubleshooting iPhone, iPad, and iPod touch accessories.
    http://support.apple.com/kb/ts2634
    Best of luck,
    Mario

Maybe you are looking for

  • Problem with full screen flash background

    I want to use a shockwave swf animation as a full screen background for a captivate presentation. If I use, 'rest of movie' to display this swf background, then any objects I try to put on top get covered over by the animation... ie. I can't see them

  • Vendor payment allowed although vendor is blocked for payment

    Hi While booking invoice through MIRO, System automatically blocks the vendor line item in case variance exceeds the tolerance limit. The system enters an R in the field Payment block so that Financial Accounting cannot make payment for the invoice.

  • Console hangs

    The Console application frequently hangs in Mavericks. It seems totally random, and it usually frees up after 10-30 seconds. I've included a Sample Process: Sampling process 245 for 3 seconds with 1 millisecond of run time between samples Sampling co

  • Ichat away status

    Hi, My ichat recently been changing its status on its own. I usually put my status as away, and when I log off for a few hours and then log back on it will still say that I am away. Recently when I have been logging off then logging back on it's sayi

  • WSDL to java class

    HI! I'd like to generate java stub classes by using the WSDL document. After parsing the WSDL document, a java class with all available method calls should be created. With IBM WebService Development Kit this is possible with the Apache Axis project