Do I have to have the Airport connected to a Mac?
Do I have to have the Airport connected to a Mac in order for it to work for a windows XP computer?
Thanks in advance,
David
here is some information for you from Apple's Support site.
AirPort Express System Requirements
Using AirPort 4.0 or later software to administer the base station, access
the wireless network for Internet connectivity, and use AirTunes to play
music requires:
Mac OS X v10.3 or later
Windows XP or Windows 2000
Wi-Fi certified 802.11b or 802.11g wireless cards, including AirPort or AirPort Extreme cards
iTunes version 4.6 or later
Accessing the wireless network for Internet connectivity and USB printer
sharing:
Mac OS X 10.2.7 or later
Windows XP or Windows 2000
Wi-Fi certified 802.11b or 802.11g wireless card such as AirPort or AirPort
Extreme card
Accessing the wireless network for Internet connectivity:
Any wireless-enabled OS
(Mac OS 9, *nix, Windows 95, 98, Me, NT)
Wi-Fi certified 802.11b or 802.11g wireless card compatible with that OS
http://www.apple.com/support/airport/
I hope this helps you.....
Similar Messages
-
I have the airport express and trying to set up internet service on my TV (Vizio) but having no luck.... I need a code to enter in order to connect! Can you help?
Hi - you might be getting full bars but a slow connection - games can be very sensitive to this - have you tried connecting via ethernet to see if it is better? - however if your wireless speed is good too then it could be a ps3 issue and a call to their support might help - otherwise there could be interference issues, radio channel conflicts, etc. - without knowing the specific aspects of your entire network environment it is hard to make any more suggestions.
-
I have recently bought an old Mac Book after having purchased an iPhone and iPad.
The internet connection (via Airport) keeps timing out while the Airport connection is still on as confirmed by the Mac and shown on the task bar.
Any ideas?
Thank you,
PeterOnly fixed this in the last day or two . . .with this!
https://discussions.apple.com/thread/3588501?start=0&tstart=0 -
My Windows PC does not have the Airport Utility, do I have to connect it to my pc first?
On my PC I do not have the Airport Utility. Where is it?
It is where all of the Apple downloads are:
Apple - Support - Downloads
Choose the right version based on the operating system that the PC is running. -
I cannot get the darn Airport Express to work! It just keeps blinking Amber. I know it must be something silly I am over looking. And I do not have the Airport Extreme Base Station.
Thank you for any help!!!
ElizabethThanks,
This is the rear of your modem/router:
Connect a Cat5e or Cat6 cable from any of the 4 Ethernet Lan ports to the (single) socket on the Express, then go to Airport Utility (Applications>Utilities>Airport Utility) and select create a new network.
You will need to turn the wireless transmiter in the Netgear off, here is a link to the Netgear Manual in case you need to refer to it.
Netgear Manual -
I can not print from my mac laptop. I have the airport extreme for wireless. I can print from my Mac using wireless but not my laptop. Laptop see the printer but says its offline when I attempt to print. Help!
Try this:
http://discussions.apple.com/message.jspa?messageID=8096765#8096765
Good luck! -
I have Remote desktop connection for my mac running osx 10.6.8 and I have a windows xp laptop, I want to have my mac be able to run the windows xp from my pc, how do I do it?
Hello Fiona,
Congratulations on your new iPhone! You can sync information to your iPhone from your MacBook Pro using the Info tab in iTunes when your iPhone is connected. Use the steps in the following article:
iOS: Syncing your data with iTunes
http://support.apple.com/kb/ht1386
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I have the airport express as router can I buy the new airport express and extend my net?
Things can get confusing pretty quickly since there are 3 different versions of the AirPort Express.
If by "old", you mean you have Model No A1084 or A1088 AirPort Express (look at the label on the side of the device for the Model No), it cannot be used with the "Extend a wireless network" feature of other newer Apple routers.
If your AirPort Extreme is "square" shaped with rounded corners, then the "old" AirPort Express will not work with your AirPort Extreme using the "Extend a wireless network" settings.
You could use a "previous version" AirPort Express, Model No A1264 to "Extend", or the "new" AirPort Express, Model No A1392, for that purpose.
If your AirPort Extreme is a simultaneous dual band product, then the "new" Express would be able to "extend" both bands. The "previous" AirPort Express (Model A1264) would be able to extend only one band, since it is not a dual band device. -
i have the serial number for my mac mini but I do not have the connection cord. Is there a way I can find specs of this mac mini with just the serial number?
Enter the SN here:
Apple - Support - Check Your Service and Support Coverage
Also:
How to identify Mac mini models -
Using Pro Logic X to record. I have several tracks and I'm trying to record an audio track. I have the mic connect to Avalon 737 then into apollo interface. When I record all track are being recorded into that track. I can't just get the audio to record.
Thanks for responding. Everything seems to work right except for the when I plug into the 737. Ok let me see if I can be more clear. I had this set up done with two representatives of Neumann, and DBox. Here it is I hope this helps. 32 Channel snake (24 Inputs 8 outputs) Channels 1-8 from snake to my Octopre for Drums. From Octropre output quarter inch lines into the Apollo 2, quarter inch input. This is so that the Apollo 2 is taking the drum tracks. Snake Channel 9-12 into Apollo 1 channels 1-4 xlr. Snake Channel 13-16 into Apollo 2 Channels 1-4 xlr. Snake Channel 17 into the 737, output of 737 into Channel 5 of the Apollo 1 quarter inch.
Ok The Dbox. Sum output L&R into channel input 7&8 of Apollo 1. Apollo 1 output channels 1-8 into summing input channel 1-8 of Dbox. Apollo 1 main L&R going to main analog input L&R of Dbox. Spid out to DAW input of Dbox. I have both ADAT of both Apollos connected by optical wire. Also have port 2 of Apollo 1 into port 1 of Apollo 2 connected by Firewire. Let me know. Hope I got it right. Thanks for responding. -
HT4623 what if you don't have wifi and you have the phone connected to your computer
What if you don't have wifi and you want to update your iphone 4s and it is hooked to your computer
Connect to iTunes, once you have the phone connected to iTunes, select it in the device pane, then in the Summary section select Check for Update.
-
Does an iPod 1 have to be connected to a Mac to download stuff
Does an iPod 1 have to be connected to a Mac to download stuff
If you have a wi-fi router or gateway, it is still best to user ethernet if it is convenient like for a desktop computer. If it's a laptop or portable device then use wi-fi is OK, but you might not get the same speeds depending on the equipment and how far you are from the wi-fi router or gateway.
-
How can I have the same environment on two macs on is a macbook pro and the other a Mac mini
How can I have the same environment on two macs on is a macbook pro and the other a Mac mini ?
Forget trying to use iCloud for this - it won't do what you want. iCloud syncs certain data like contacts and events, but it doesn't sync "environments" on computers.
-
I do not have the icloud icon on my mac I have something that says mobile me and it does not accept my apple credentials. How can I get the correct icloud icon
What Mac OS X do you have? ICloud requires 10.7.2 or higher. Then the iCloud icon is in System Preferences.
-
I'm trying to sync my ipad over wifi, with my MAC, I have the updated software on my MAC, the ipad is up to dat 6.1.2. I can follow all of the steps, but I can't find a SUMMARY button on the toolbar, nor do I receive the option to sync. What am I doing wrong or what should I look for? Thank You
To sync your iPad over Wifi:
First ensure you're running iTunes 11.0.2. And you already have your iPad up to date, good.
Plug your iPad into the Mac via USB. Click your iPad in the top toolbar (under the search bar). Click the Summary tab if it isn't already selected. Check the box to "Sync with this iPad over Wi-Fi" (you may have to scroll down to see it). And now click the Apply button at the bottom right.
You should be able to unplug your iPad from the Mac and it should still remain in iTunes. (If not, try Quitting and relaunching iTunes and waiting, restarting iPad, etc).
To initiate a sync over Wifi, click your iPad in the toolbar in iTunes then click Sync. Or on your iPad, go to Settings > General > iTunes Wifi Sync and tap "Sync Now."
If this didn't solve your problem, please let me know with a more detailed explanation of what you're experiencing so I can try to help you get up and syncing wirelessly!
Maybe you are looking for
-
How do I delete Apple e-mail aliases from iOS 8?
I have e-mail aliases from iCloud stuck in my iPad/iPhone that I have already deleted in iCloud. I cannot see any way of deleting them in iOS 8. Am I missing something here? Thanks. Shawn
-
Create a new user in xMII version 11.5
I want to create a new user in xMII version 11.5 that has rights to view everything and create queries. So far the user is part of the EVERYONE role and can view most of the items that the Admin can see. My question what do I have to do in order to
-
Crystal Report Fails on Large Jobs
Post Author: Lynn CA Forum: Crystal Reports We have developed user software in VB6 using Crystal 8.5. We use SQL Server for the database and a DSN for the report connection. Our problem is that when a large print job is sent to the printer, it some
-
New to PSE 13. Attempting to merge two photos. Follow tutorials and book. Select the two photos, Expert Mode but the guide along the right never appears. Can't move forward. Would love some guidance. Probably just a setting but cannot find any
-
We have one Macbook Pro user here who is on our Windows AD network (using his own machine unfortunately) but experiencing problems. We have reserved an IP address to facilitate internet access\firewall rules, however whenever the user initiates any p