Do I have to re-installo Parallels Desktop after OS X Mountain Lion migration
I upgraded my iMac 27'' to OS X Mountain Lions. The previus installed Parallels Desktop (Version 6) is not more available. So I cannot start any Window Vista application (a question mark "?" instead of a Window Application folder is desplayed in the dock). Do I have to re-install Parallels Desktop ? If it is the case which Version do I need to install ?
Your version isn't supported. Run the Parallels Desktop installer and it will update to the most recent version
Similar Messages
-
I have an Mac air 2011 and after install osx mountain lion when I do update to some programs like iMovie and iPhoto and make sleep mode to dowenloaded it doesn't dowenloaded in sleep mode it stop please help me
i guess you could put the aiport utility app on your iphone, click on the aiport express there, it will show you how many devices are connected to it and the mac addresses of those devices.
-
I have MacBook with snowlepord with parallel desktop can I update to lion with parallel?
I have MacBook with snowlepord with parallel desktop can I update to lion with parallel?
Well, apparently you can using VMWare Fusion...
http://osxdaily.com/2011/03/07/install-run-mac-os-x-10-7-lion-in-a-virtual-machi ne-with-vmware/
And maybe with some hacks or updates to Parallels 6...
http://forums.macrumors.com/showthread.php?t=1104106&page=4
I haven't had time to try it myself. -
I bought a new desktop, which is running Mountain Lion; do I have to buy it again for my laptop?
I bought a new desktop, which is running Mountain Lion; do I have to buy it again for my laptop?
If the new desktop came with Mountain Lion already installed, you will have to purchase it separately for your portable. If you purchased ML for the desktop, you do not need to pay for it again.
-
After upgrading to Mountain Lion, I repurchased Garageband and I can't get passed the complete installation. I've read through several posts that all reference the "com.apple.garageband.plist" solution. I don't seem to have the referenced .plist. Any solutions or suggestions?
Did you upgrade from SnowLeopard?
I can't get passed the complete installation
What exactly is happening? Is GarageBand trying to download over and over again?
all reference the "com.apple.garageband.plist" solution. I don't seem to have the referenced .plist.
The property list stores your preferences, but also the settings from the last run of the application. If that file is corrupted in some way, you might see third behaviour.
You must have this file, for it will be recreated automatically, if it is missing, or you have a permissions problem with your user library.
Perhaps you did look in he wrong place.
in MacOS 10.7. or later the User Library is hidden. To find the Preferences Files use the Finder's "Go" menu:
Quit GarageBand, if it is running.
Click onto you Desktop to bring the Finder forward.
In the Finder Menu press "Go" and hold down the "option/alt" key, until your user library appears in the drop-down menu
Select "Library" and in the Finder window that opens navigate to the "Prederences" folder; move com.apple.garageband.plist to the Desktop.
Log off and on again (don't skip that step!). Retry GarageBand and see if it GarageBand is now downloading the missing content properly.
If that does not fix the problem, post back and explain in more detail what the download problem is.
Why did you "repurchase" GarageBand? If you already owned GarageBand '11, it should be unnecessary.
Regards
Léonie -
after upgrading to mountain lion, i find that my mail app does not have a "VIP" Tab. Was wondering if anyone else has this issue and what it is about?
First, select sender(s) as VIPs. Then the VIP category will appear.
To select a sender as a VIP, open an email from that sender, then hover over their name and a star icon will appear to the left. Click the star, and that sender will be set as a VIP (and the category will appear in the pane on the left). -
I have an Epson Perfection V100 scanner and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?
Check the Epson web site for updates to drivers and Epson scan software.
-
I have an HP Printer/scanner, and since upgrading to Mountain Lion I can no longer scan on my HP. HP tells me that I can get an upgrade app from 'Apple Software Upgrade' . Does anyone know how to do this?
HP couldn't find its own apps with both hands and a flashlight.
As of Lion all scanning functions are incorporated natively in OS X. You can scan three ways:
Use Preview: File > Import from scanner
Use Image Capture
(Preview and Image Capture are both in your Applications folder.)
System Preferences > Print & Scan. Select your HP and use the Scan tab.
If you have HP's "Image Zone" software installed, you no longer need it and it no longer works anyway. -
I have problem in quicklook for mp4 files in my mountain lion os 10.8.2 so please help me what i need to do? but i can view mov,3gp,jpeg files problem is only with mp4 files.... any one help me...
I have problem in quicklook for mp4 files in my mountain lion os 10.8.2 so please help me what i need to do? but i can view mov,3gp,jpeg files problem is only with mp4 files.... any one help me...
-
I have problem in quicklook for mp4 files in my mountain lion
I have problem in quicklook for mp4 files in my mountain lion os 10.8.2 so please help me what i need to do? but i can view mov,3gp,jpeg files problem is only with mp4 files.... any one help me...
I guess you are calling BDC right after some event which is locking the data or before the commit of previous data could happen. Sometimes data update needs time. You can try using WAIT statement right before it and wait for 1 or 2 seconds and see if it works.
If it does, I would recommend you to check the lock on the corresponding object and when lock is removed update the data as waiting for 2 seconds for a larger set of data will just make the program a bit slow. Depends on the amount of data though, if it is just one set of transaction, you may use WAIT for 2 seconds.
Regards,
Aabhas -
After install of Mountain Lion I have no facetime. It is nowhere in hd and ap store will not allow download.
Will I need to re-instal ML in order to get it back?Where are you, geographically?
I might suggest:
Give this a try:
Repair the Hard Drive and Permissions - Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
After this is completed download and install 10.8.4 Mountain Lion Update v10.8.4 (Combo).
If this doesn't work, then reinstall Mountain Lion:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
hi after updating to Mountain Lion, it becomes difficult to quit Mail, always have to Force Quit. And while Mail is on standby, the fan keeps on running full power, the laptop is hot. Why is this happening?
If your computer was hot it wasn't asleep - it either didn't go to sleep or it work up after you put it to sleep. I've seen both things happen. First, read this article and follow the instructions.
1) For the next few days/weeks pay attention to the blinking light on the front of your computer when you close the lid. Don't put the computer into your backpack/case until it begins to blink. Wait a minute or so after it starts to blink to make sure it doesn't stop blinking - the signal it woke back up.
2) having followed the above instructions, if you take the computer out and it is hot again or if you take it out and discover it has powered down (you'll know this because when it starts up the battery will be drained and you'll see a progress bar over a ghostly display that will eventually become normal) immediately start the Console program and perform a search on 'sleep' and then 'wake'. This should bring up all the recent log files about sleep state changes (going to sleep and waking up). You should see one for when you put the computer to sleep and put it away and the next one should be just after you got it out. You'll find at least one though that shouldn't be there. That will tell you when the computer work up (when it shouldn't have) and might give a clue as to why.
One of the whys could be a magnet that is making the computer think the lid has been opened. -
I have downloaded the latest flash for my mac (running mountain lion 10.8.2) multiple times and have uninstalled it multiple times, but it still says blocked plug in. Im using firefox for now. any help? Firefox and safari are like night and day. i just want safari back.
Thanks.Adobe support article.
Adobe Flash Player Troubleshooting
Adobe Flash Uninstaller -
I have an Epson Perfection V100 and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?
Check the Epson web site for updates to drivers and Epson scan software.
-
With Lion I had 2 user accounts. Why do I have three user accounts after upgrading to Mountain Lion?
I had consistenlty had a master admin user account for myself under Lion, plus the "Guest" account recommended and created by Lion. After upgrading to Mountain Lion, I now have the same 2 accounts, plus a new one called "Other." Why do I have that? Why was it created? How do I get rid of it if it is not needed?
I meant to include this info from the System Profile:
Maybe easier to read:
Canon MF4400 Series:
Status: Idle
Print Server: Local
Driver Version: 1.1.0
Default: Yes
Shared: Yes
URI: usb://Canon/MF4400%20Series?serial=0122F5200302
PPD: Canon MF4400 Series
PPD File Version: 1.1.0
PostScript Version: (3010.000) 550
(3010.000) 651
CUPS Version: 1.6svn (cups-327)
Scanning support: Yes
Scanning app (bundleID path): -
Scanning app version: -
Scanner UUID: 00000000-3031-3232-4635-323030333032
Printer Commands: none
CUPS filters:
capdftopdl:
Path: /Library/Printers/Canon/CUPS_MF_Printer/Bins/capdftopdl
Permissions: rwxr-xr-x
Fax support: No
PDEs:
BasicSettingsPDE.plugin:
Sandbox compliant: Yes
Maybe you are looking for
-
I keep geing an unknown error sign whenever I try to download any apps
No matter how many times I have tried, I recieve an "unknown error" whenever I try to download apps to my iPhone
-
I just upgraded to PSCS5 from cs3. Win7 pro 64bit. All is well till I start printing. I print to 2 R1900s. The process goes like this: When I change the number of prints to, say, 3. The printer will print one print. The next time I try to print that
-
Replacing "some" text from an If Statement to crItalics in output?
Hello, I have written a report which is user interactive. CR is connected to and generated from CA Clarity. The user enters in say "Y" in a parameter and the Answer is then passed to an If Statement in the Crystal Reports XI, but Y might mean 'enter
-
Exposing SAP systems directly through Portal
Hello All, If we expose the SAP systems directly through the Portal by creating transaction iviews, Are there any security lapses. I could see a great advantage of users having the internet enabled usage of SAP systems of their organisation. Is this
-
Dynamic link server won't connect
After a complete reinstall of my computer (Mac Pro 5.1, nvidia GTX 120 & GTX780) i cant use dynamic link to import sequences out of other projects. Dynamic link server can't connect. What can I do to resolve this?