Do I have to reinstall the system again after changing the CPU ?
Hi !
Today I replaced the old CPU P3 650 copermine @ 866 mhz with the P3 1000mhz.
The bus is on 133mhz.
I am not sure from where the problem is rising, but i am sure that before the change I was not having this problem. Now when I listening to the music , in time to time I experience some skipping or freezing in sound (very quickly) like when you are running out of memory or when u opening a lot of programs and the cpu loads 100%...something like that and this affect the sound.
Does anyone know if when changing the cpu, its better to reinstall the system again ? Is it neccesary ?
Thanks
The heatsing on this cpu in foxon.It is a passive heatsing. The working temperature is about 43 degrees celzius. Quite normal. the cpu is not overclocked.
I tryed to lower the bus speed from 133 to 126mhz and then I dont have thoose problems. Really weird, because with P3 650 overclocked to 866 / 133 host bus with a golden orb heatsing I had quite the same temperatures without problems. I tryed also to raise host bus to 135 mhz , but then this problems comes again. So now I am running a P3 1000mhz @ 950mhz on 126mhz bus speed. Seems that I dont have much choises. if I want to use 1ghz cpu on my mobo , i had to down a little bit a bus speed from 133mhz/33mhz (pci) to 126 mhz/31mhz (pci).
Can enyone tell me... what do you think : which configuration was faster:
1. P650/100 mhz Oc to 866mhz/133mhz - pci 33mhz
2. P 1000mhz/133 mhz adjusted to 945mhz/126mhz bus speed - pci 31mhz
Thanks for your replies.
I dont know how many it counts the pci frequqency. this frequancy is adjusted itself and I cant change it.
The PSU in a 450w newer one. Some strange sounds comes out of it. Also when it was brand new. I replaced it with the same one , but it is the same.
Thanks for the suggestions.
Similar Messages
-
When I buy the system, will it change the previous system?
I mean that I now have a normal Macbook Pro 13".
Until now, I used Linux for my WEB servers, but now I want to try Mac OS X Lion Server.
If I buy the system, will it change my normal Lion system?
Because its a normal computer that I use every day, and I dont want it to become to a server that will not let me work normaly on every day.
When I will have the system, when I close the program that run the server, the computer will return to be normal Lion system?when you download Lion Server from the App Store, by default it stops running when you quit lion server. You can configure it to be always running if you want.
When I installed lion server, I found that I had to wait a little bit longer for system updates to become avaliable.
Some of the features in lion server are really targeted to a 'server,' for instance HTTPS, FQDNS, Bonjour Domain hosting, DHCP with DNS. some of these services are really built around the idea of the computer having a static ip address.
So far, with lion server, I have been able to do every I could do with lion. plus I have the server stuff. The one thing I do notice, is that having lion server running dose consume system resources. -
We have a corporate website, we officially support FF3, FF4, IE8 and IE9. Our web site is quite big, so we really need browser caching, first time page load is around 15 seconds. With files in the cache getting new page is less than a second.
Everything works perfect except with FF3. With FF4, IE8, IE9 if we are on the website, clicking everywhere is fast, the page is in the cache. If we restart the browser, it is still fast, it loads files from the cache.
But with FF3 we have a problem. Every time we restart the browser, it is loading the files again from the server, instead of using the local cache (checked with Firebug). I can reproduce the problem anytime, it is the same with every FF3 instances. I double checked, the "clear history when Firefox closed" option is not enabled.
Could you advise please how to use the local cache either after browser restart?
Thank you!
ChrisJust read that the default memory storage on FF is set to 5 mbs. You can up that by clicking on tools, advanced and overriding the default and set it to 50 mbs (if you use lots of tabs) or 10 mbs (if you use just a few).
I open a blank tab and clear the cache periodically, while I am working. I can have several tabs open and watch videos on Youtube, by doing this. Have you cleared your cache?
Since I have an older computer, I've also used CCleaner for years. I use it often, but always before signing off. You can get it free...search for CCleaner, download from Pirifoam free. I didn't change any of the settings and it clears crap left behind from uninstalling programs, clears all browsers at once of: cookies, history, passwords, etc. I love it!
I had freezing, before using the "open blank tab, clear the cache" thing. Now I have no problems. Plus, as I said...you can change the default memory usage for FF and that should help too.
Hope this helps! Good luck! :) -
How to cancel the second ATP after changing the delivery date in the SO
Hello,
our solution creates automaticly a production order accorting to sales order.
The system calcule ATP for each items at the creation of the sale order.
Sometime, we change the delivery date on the scheduled line and SAP do another ATP. If the composants are not available we get an TSUP status on the order production.
How can we cancel the second ATP ?
Is it possible to cancel it when we change delivery date ?
Thanks
Regards
PierreI think its not possible to skip the atp during change of the sales order. All these determinations will trigger before saving the order
regards,
Ramana -
What could cause the lock in my preferences to seemingly to click open on there own,I use my home wifi network which is private and have never given out that password either for my network or preferences password.....help,Thank you
You're welcome.
Voicemail is left at your carrier's server. That will continue to work unless you report your iPhone as lost or stolen with your carrier.
You may never find it again and you can't if the iPhone remains offline or out of service which means the iPhone is powered off or doesn't have cellular reception. -
How to pick up the 3d model after change the picture control to the Opengl control?
Colleagues,
I have a problem when I use the cvi.I need to draw a 3D model use the opengl in the picture control,and pick up the mode.For example,I transfer the picture control to the Opengl control,then draw a cube and sphere by Opengl。And I want to pick up them。Such as,when mouse click the cube,it will show a MessagbBox("a cube");when mouse click the sphere,it will show a MessagbBox("a sphere");But it doesn't work.
I'm a chinese student and juse begin to learm the cvi.And my English isn't very good.I don't know whether the problem has been clear.Anyone can help me?I haven't used the OpenGL CVI addition for years, but IIRC there is (was?)
no callback associated to it. Meaning that some actions are defined within
the OpenGL control, such as rotation/zoom, but that's it.
Guillaume Dargaud
http://www.gdargaud.net/ -
How to use the system recovery after add another SSD?
Dear all,
I got a Zbook14 with 1TB HDD with Windows 7 in default. Soon after I received it, I added an M.2 256Gb SSD and migrated my system drive to the SSD.
After an malfunction of the HP Client Security that encrypted my system drive (in SSD). I used the HP recovery tool to reset the computer into the default factory status... This action, which I can not select the harddrive during the recovery, wiped my oroginal system paratation (now the data drive) in the 1TB HDD, and thus I have to migrate the system again (not mentioning the data in that partation..).
I wonder if I can change the target drive for the recovery? I did not move the original HP partations from the HDD to SSD. Only the system partation is moved to SSD.
Thanks.You don't have any option in terms of changing the target drive for an HP recovery performed by the HP recovery manager.
It is scripted and there is nothing that you as the user can change other than selecting the type of recovery desired.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
PDF in Word after changing the old PC
How can I use the Adobe ExportPDF after changing the crashed and old PC
Hi Zis,
I'm sorry to hear that your computer crashed. That's never any fun. But, you shouldn't have any trouble accessing ExportPDF on your new system. Simply log in directly to cloud.acrobat.com/exportpdf. And, you if typically access the service from within Reader, you can download the free Adobe Reader from www.adobe.com/products/reader.html.
Please let us know if you need additional assistance.
Best,
Sara -
I have an active subscription but everytime I open the program it says trial expired. I have installed, reinstalled, and installed again. I have also installed the windows registry patch.
It wouldn't install for nearly 5 times I tried to do this. Now it's finally installed again but it won't budge past the trial version. I click BUY NOW but then it says "error you already have a subscription" then it times out and just stays on the Trial Expired page.Hey kushlar,
Please log out from your Adobe application and login again.
Once you launch Acrobat and get error saying trial expired, you will find an option saying 'license this software'.
Select this option and enter your credentials.
Now check and let me know.
Regards,
Anubha -
I have big problems with mountain lion. you can not have a boot disk system I resulted in the need to re-download the os from scratch impiegandoci 8 hours, it is outrageous even with windows 95.
at least that the operator has confirmed to me that he called me. I also have problems with either the start of the mac with the power off. I can not understand if it crashes or is just very very slow.
Finally, I have a problem with the external hard disck. I often said to have been ejected incorrectly (not true) and I start to restore the startup recovery disk because disk utility is ineffective from the normal operating system .. is a shocking thing, but how you reduced. in four years it had never happened. seem to have windows or worse. Wake up.
I am an Italian, alas, and then I would like an answer to my language because my € are the same as German French or English.You are on Windows 2000, you do not have a "Firefox" button, and should consider yourself to be fortunate in that you still have menus and don't have to do anything to get the menus back instead of the "Firefox" button. (The same applies to Windows XP users).
Use the "File" menu to get to Import. You are not on Windows 7 or Vista, and don't have to put up with the nonsense added for Aero.
If you want the "Firefox" button you can get it with View -> toolbars -> (uncheck) Menu Bar. The menu bar and the "Firefox" button were supposed to be mutually exclusive (which is impossible in some cases without being incompatible).
Once you are using the "Firefox" button ...
Use the "Alt" key to view the menu bar (temporarily) containing File, Edit, View, History, Bookmarks, Tools, and Help. On Windows 7 and Vista, the menu bar was hidden by default in Firefox 4 and above. These menu items are more or less available under the "Firefox" button which has the most used of the built-in Firefox menu items available in a different format.
To get back to having menus again. "Firefox" button -> Options (second column) -> (check) Menu Bar
You can make '''Firefox 7.0.1''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
* http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface -
I have a macbook pro and I want to use my canon firewire digital video camera on yahoo chat. When I sign on to chat and attempt to use a camera, the system automatically defaults to the built in camera on the notebook. Can I override that default?
You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
http://roaringapps.com/apps:table
Far as your Safari problem do these things until it's resolved:
1: Software Update fully under the Apple menu.
2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
https://www.mozilla.org/en-US/plugincheck/
Flash install instructions/problem resolution here if you need it.
How to install Flash, fix problems
3: Install Safari again from Apple's web site
https://www.apple.com/safari/
4: Run through this list of fixes, stopping with #16 and report back before doing #17
Step by Step to fix your Mac -
I can´t syncronize my Iphone 5 with Itunes 11.1.5.5. The option looks like locked in the menu. I have tried reinstalling Itunes but this is not the solution. Actually my PC runs under Windows 8.1. and Iphone runs under IOS 7.1. Someone can help me, please?
It seems I have solved my own problem . . . well hopefully !! ;-)
I was using a 'non' Apple cable. When I swithced to using the stock cable that came with my iPhone, iTunes can now see that I have a 'Device' and identifies it correctly as my iPhone.
Hopefully this may help others . . . ?
Cheers,
Grant. -
I can't get to download the app store after all the updates. I have version 10.6.8 and there are no more available updates for my operating system.
Look in the HD/Applications folder.
-
I have Windows 8 pro on my computer . I un-installed itunes on my computer to re-install itunes 7.1.1 Now the system will not allow the re-install. Can anyone help?
I have an HP Officejet Pro 7580 similar to the 8600 you have and after upgrading to Mountain Lion it wouldn't work. HP support site said download updates for Mountain Lion from App Store not their site so I went to software update but there were NO UPDATES FOR 10.8. Tried a million things and could not get printer to work. So I restored back to Lion figuring at least printer worked then only now I can't get it to work with old settings either. I am sick to death of claims by Apple and peripheral manufacturers that everything is compatible all you have to do is get updates well in this case THERE ARE NONE TO BE GOT and I don't have time to **** about trying to find 'work arounds'. There shouldnt be a need for work-arounds. Unless the updates are ready DONT release the new OS. You shouldn't have to be an IT tech to make basic things like printing work. I see also the HP 8600 is even sold by appstore so there is no reason why it shouldn't work with minimum fuss.
-
Erec-Unfortunately, the system is unavailable at the moment;try again later
Hi,
I am trying to open Erecruitment from portal Employee Self-Service -> My HCMS Profile & Career Opportunities. It takes me to eRecruiting page. But I am not able to see the eRecruiting page. It is giving "Unfortunately, the system is unavailable at the moment;try again later" error.
When i checked in SLG1. There were 6 errors logged.
1) Internal error in function module HRRCF_MDL_CAND_PROFRL_RETRIEVE
2) The error occurred in program CL_HRRCF_CANDIDATE_ADMIN_BL===CM00A line 37
3) The incorrect HR object has the key 01NA50100650
4)The error occurred in program CL_HRRCF_CANDIDATE============CM00C line 69
5) No status information available for object CANDIDATE
6) The error occurred in program CL_HRRCF_CANDIDATE============CM00C line 35
Can anyone helpme out to resolve this issue asap.
Thanks and regards,
RashmiRefer to below thread :
How to delete candidate information or NA object of the candidate?
Regards,
Rashmi
Maybe you are looking for
-
Hi Iam having MTO Scenario I have one non-stock material in BOM. It is having procurement type F. When MRP is done then it creates PR with account assignment E. How to get PR with account assignment F for nonstock material?
-
Here is my senerio, I have two comboxs, one named C1 and one C2....... I want to populate two different dynamic text boxes named ct1 and ct2. When I select the pull down on one of the combo boxes it populates both ct1 and ct2???? See script, what am
-
My iPod touch gen5 wifi keeps dropping out. All the other iPods, iPad, and iPhone 4's don't in the house. Why doesn't it remember the wifi password like the other i devises, it's a bugger entering it in every time.
-
Spry/samples/ - not in download
After downloading the library, I cannot find the code to the demo http://labs.adobe.com/technologies/spry/samples/data_region/DataSetMas terDetailSample.html Where do I find the city XML files referenced in the second dataset constructor? var dsState
-
My iPhone is not letting make phone calls or receive emails or texts. It tells me I need to restore it through iTunes. How do I do that?