Do I have to render and transcode 2 separate videos if I want to make 2 slightly different videos?

I am building a wedding video from scratch and am making 3 copies, however one of which has a literally 10 second clip which needs to be added to a version getting sent to the States (I am form the UK). The other 2 copies are exactly the same minus the short clip. Is there a quick way to make this second video with short clip or do I have to encode the full video again?

Depending on the format/codec you're encoding to, you might be able to leverage smart rendering. If you use one of the formats that supports smart rendering, then what you could do is export one version, round-trip it back into Premiere and create a new sequence from it, either insert or trim out that 10 second clip, and export to matching settings. The essence of smart rendering is that it decodes and re-encodes only where necessary--new or modified frames; everything else is simply copied bit-for-bit. That saves time and avoids generational degradation.
Adobe Premiere Pro Help | Smart rendering

Similar Messages

  • Should it take 40 minutes to render and transcode a 3 min video?

    I was using FCE on a 2009 unibody MacBook Pro.  It was starting to drive me crazy, so I stepped up to the plate and bought a new Quad Core 2011 MBP and FCPX.  I'm editing 1080P from a Canon 60D and my typical video is about 3 minutes with several transitions and a graphic overlay.  I'm typically saving the video locally using compressor's pre-configured YouTube 720P format. 
    Doing this seems to bring my machine to its knees for about 40 minutes to render and transcode the 3 minute video.  All my other programs become somewhat unresponsive.  Is this what I should be expecting, or is my computer having issues?  I was hoping my shiny new $2300 machine was going to eliminate this problem, but it doesn't appear so.  I've seen people mention that Qmaster isn't worth it for short videos, but if it's taking 40 minutes, I'm wondering if clustering is needed, or my computer has problems. 
    Thanks!

    Well.. i'm using a 2009 unibody macbook pro and have no issues whatsoever. So lets try and see what your doing wrong.
    When you say "I'm typically saving the video locally using compressor's pre-configured YouTube 720P format" do you mean you are importing the files from the camera and then converting them to this format before working with them in Final Cut?
    Unless i'm mistaken, "YouTube format" seems to be .MP4 H264 codec. For working in Final Cut, that is a BIG no no, and might explain why your machines take forever. Final Cut likes ProRes 422. You can import and transcode to ProRes right in FCP in the Log and Transfer Window.
    Or save the raw files onto your computer and use MPEG Streamclip to convert them to ProRes.
    It is very important to do some research and figure out the best workflow for a particular NLE, before going out and spilling another 1.7k for something that still gives you trouble because of something you are overlooking.

  • I need to change my rescue email,but i forgot the password to that email,what will i do?and i have 25 ueros on this apple account so i dont want to make a new one!

    i need to change my rescue email,but i forgot the password to that email,what will i do?and i have 25 ueros on this apple account so i dont want to make a new one!

    Have you forgotten your password? - if so, you have a problem if the email address has gone dead.
    If you know your password, go to the iTunes Store, click on Account. log in and you can change the associated email address.
    If you don't know your password, and have no email address, you are going to have problems because it's difficult to see how Apple are going to identify you as the authorised owner of the account. Contact iTunes Support: go to http://www.apple.com/support/itunes/ - click on 'Other iTunes Store Features' in the list and then on 'Podcasts'. You will see a link to either 'Express Lane', which will guide you eventually to some contact options, or you may see a link to email them.

  • I want to triple boot Have Snow Leopard and XP on separate drives and I want Windows 7 on another drive, can it be done by temporarily removing the xp drive and installing windows 7 on another internal drive?

    I want to triple boot my Mac Pro I have Snow Leopard and XP on separate drives (osx on drive 1, xp on drive 2) and I want Windows 7 on another drive (drive 4, drive 3 is used by osx for storage), can it be done by temporarily removing the xp drive and installing windows 7 on drive 4?
    I realise bootcamp only allows 2 operating systems and refit could change the size of my current xp drive to accomodate W7, that is not an option here for various reasons one being the drive is pretty much at capacity with only about 30gig free (I work with video so that free space fluctautes quite a bit). I have a brand new drive 4 with 1TB set aside ready for W7 but I'm unsure how to go ahead?
    any help or advice would be really appreciated, thanks

    Boot Camp is used to support Windows on the same drive.
    You can have a different OS on every drive.
    You could have Windows 7, Vista, and XP all on one drive if you so choose.
    I recommend not putting Windows and OS X on the same dirve when talking about Mac Pro - unless you just need something small and lite.
    Remove all your other drives while you install Windows 7.
    You could even relocate XP - if you need it even - or recover the hard drive space.
    You should always keep 30% free for Mac OS; same for data/media drives.
    Considering 1.5TB WD Black $110.... and you want OS X to be on a fast high performance drive as well.

  • Can I have iTunes 11 and 10 on separate accounts , same computer?

    Can I have iTunes 11 and 10 on separate accounts , same computer?

    Thank you Niel
       I have 11 on my SnowLeopard macbook and 10 on my newer 10.7.5 iMac.
    I've been comparing them and fiding lots of faults with 11 but I thought if possible I might give 11 another chance on a newer system but I guess not

  • I have a stuck CDR disk in my MacBook. I have tried everything and nothing works. When the computer starts it makes weird sounds and also when I try to eject it. Nothing Works! Please Help.

    I have tried everything and nothing works. When the computer starts it makes weird sounds and also when I try to eject it. Nothing Works! Please Help.

    I had that happen with a MacBook. It turned out that the metal case above the slot was slightly bent down.
    Putting a flat blade screwdriver in the slot and gently twisting it to move the metal case up allowed it to eject. Don't put it in too far you only want to bend the case not the drive.
    The case can get bent down by picking it up with your thumb pressing down on the case above the slot.

  • I have $0.52 Credit in my app store. I want to make it zero in order to change the country.

    I have $0.52 Credit in my app store. I want to make it zero in order to change the country.
    I have $0.52 Credit in my app store. I want to make it zero in order to change the country.
    I have $0.52 Credit in my app store. I want to make it zero in order to change the country.
    PLZ HELP.. Delete it

    Contact Mac App Store support and request that they zero out your account.
    Mac App Store Support -
    http://www.apple.com/support/mac/app-store/

  • I have a macbook and it has iMovie on it i want to put iMovie on my iPad without buying it

    I have a macbook pro late 2011 and it has imovie built in. i want to have imovie on my ipad but i want to copy it from my laptop instead of buying it for 4.99.

    He synced his pad with the MBP to get the movie on both, Not the iMovie app. Mac's run OS X as the Operating system and iPads run iOS. Two totally different operating system and because of that they use different programs/Apps on each.
    So yes you can have iMovie on a Mac, all Mac's come with iMovie as part of the included iLife apps, which is written to run on Mac OS X and I guess you can have iMovie on an iPad, I guess as I don't own an iPad so I have no idea what Apps Apple includes with an iPad, which is written to run on the Apple iOS.
    But you can not have the same iMovie for Mac or Pad on the other.

  • Hey I was on my computer and it wasn't starting up so I pressed command s and this code stuff showed up and said :/ root# It says "if you want to make modifications to files: /sbin/fsck -fy /sbin/mount -uw /

    It says "if you want to make modifications to files:
    /sbin/fsck -fy
    /sbin/mount -uw /

    Hello frankenstienfromab,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck
    http://support.apple.com/kb/ts1417
    If your computer won't start up normally, you may need to use a disk repair utility to fix the issue. Mac OS X includes two utilities for this—Disk Utility and fsck (a command-line utility).
    fsck is a command-line utility that may be able to verify and repair a disk.
    Best of luck,
    Mario

  • I have wi fi and recently Firefox downloads videos very slowly and sometimes stops download becuase it can not read files

    The only time I have experienced the slow down load was when we exceeded our bandwidth. This problem is different because at times it downloads at around 4oo kb's but then it will seem to hang and will slow down to 40 to 60 kb's. If I pause it then sometimes it begins at the 400 range but then it returns to the lower 60's. Other times it brings up a message that says Firefox was unable to save this file and stops. If I retry it makes no difference.

    HAVE SAME PROBLEM WITH FIREFOX, ALSO WITH IE-8. HAVE TALKED TO TECH AT IE-8 SAYS MY SIDE FINE. HAVE FOR 2 WEEKS TO DOWNLOAD FROM MOVIEPRO.NET. AND MY TIME RAN OUT TO DOWNLOAD MOVIES.
    THERE NEEDS TO BE A SITE BBB. AT THE TOP OF EVERY SEARCH WINDOW. OR A NUMBER CODE FROM BROWSERS. THAT WILL TELL US A NUMBER, FOR WHAT KIND OF PROBLEMS PEOPLE ARE HAVING WITH THE SITE YOU ARE GOING TO.
    I HAVE WROTE TO MOVIEPRO.NET 12 PLUS TIMES AND THEY WILL NOT WRITE BACK.
    SO IS IT MOVIEPRO.NET OR FIREFOX. OR IE-8
    HAY IF YOU PAY US $140.00 WE WILL TELL YOU HOW TO UNCHECK 2 BOXES AND HAVE A NICE DAY..
    AND WHEN YOUR COMPUTER REBOOTS, ALL THAT IS HISTORY

  • HT1491 I have an account and when I enter my password they want me to answer questions

    I have a account all ready with iTunes and when I sign in they want me to answer security questions I have never set that up

    Are you sure that the answers that you are giving are correct (and I think that they might be case-sensitive).
    If you have a rescue email address set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
    If you don't have a rescue email address then go to Express Lane  and select 'iTunes' from the list of 'products' in the middle of the screen.
    Then select 'iTunes Store', and on the next screen select 'Account Management'
    Next choose 'iTunes Store Account Security' and fill in that you'd like your security questions/answers reset.
    You should get an email reply within, I think, about 24 to 48 hours (and check your Spam folder as well as your Inbox)

  • Suddenly have red, green and blue splotches on video clips

    It looks like something to do with exposure but I don't know how it appeared, why it appeared, not how to get rid of it. It's driving me crazy, how do I turn it off?  It's hard to see but the splotches are a red one on the pan on the right top, and a green one on the woman's armpits and under her collar. There are more but that's an example.

    Hi, I had a similar problem with clips that were ok in FC PRO but had colour artefacts in FCP X. Drove me to distraction.
    I then discovered that by moving the FCP X window to another monitor (I have 3 monitors) the colour artefacts disappeared.
    My main monitor is a 24"' IPS, calibrated FOR PRINT with ColourMonkey hardware and software, and the other 2 are TN monitors.
    Anyhow, since my clips appeared ok on the 2 TN monitors i chose a different colour profile for the main (IPS) monitor and, voila...problem solved!
    I am certainly no expert in things FCP so i may be wrong, but it could be worth a try?

  • I have an iPad and an iPhone. I DO NOT want my iMessage syncing across both devices. How do I change it so that I only receive iMessage on my iPhone?

    My iPhone is synced with my iPad so this means that all of my iMessages being sent to my phone are also being sent to my iPad. I do not want my iMessages to be synced so how would I change it back so that ONLY my iPhone will receive my iMessages. 

    What if I deleted the email address on my phone so the only option for the "Send and Receive" is my phone number. The problem is that I sold my iPad and cannot get it back so I am trying to find a solution where I do not have to use the iPad.

  • I have LR bought and installed on one computer. I want to install it on another computer. How do I do that?

    How do I install LR on a second computer?

    download the installation files and install (as long as you have a serial number for the 2nd computer's os).
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Have purchased apps and add on's on ipod touch want to move to IPAD

    I just purchased a brand new ipad. I have purchased apps from my ipod along with add ons I purchased. I have tried Icloud but it doesn't sync from the ipod to the ipad when signing in with the same game center ID. I synced the ipad via Itunes to the Ipod  but the add on's don't show on the Ipad only the Ipod, what am I doing wrong? This is frustrating.

    When you really think about it the whole thing makes sense. Your playing the game on your device not in the cloud. For instance, the reason you can use documents in the cloud to start a document on one device and finish it on another is because it is being backed up on the device. The game you are playing is on the device. For that to work the manufacture of the app would have make a way for you to upload your app data inot from you game into their server. You probably who have to have an internet connection to upload your game data to a sever. That probably would mean signing in with an account to continue your game on another device.

Maybe you are looking for

  • 5.0.6 Crashing in 10.5.8

    Hi, Copied the error below - doesn't let me get very far with my browsing. Just happened today. Have read other, similar threads, but not sure if same issue. Appreciate any help. Process:         Safari [281] Path:            /Applications/Safari.app

  • WCS 7.0 Campus problem

    After installing the WCS upgrade to 7 to the wrong drive letter, I uninstalled it and reinstalled to the correct drive.  I then restored the database backup and all looked ok.  I noted that in the restore, I now had a System campus.  Thought I would

  • IPad2 stopped syncing after latest updates?

    After recently updating my iPad2 to the latest edition it no longer manually syncs with the iMac and therefore doesn't sync with iCloud?

  • Archive Viewer not showing project variables in filter conditions

    Hi ! This is a strange issue. We have a full archive database. The viewer displays all the process we have deployed. We can see the contents of the archive without problems. We have also defined like 15 project variables. If we take a look at the fil

  • Setting up iptables in arch

    Hi, I am new to arch. without any previous experience of setting up my own firewall. I have copied a iptable from fedora 20, using iptables-save, and trying to reload it in my current arch machine. the iptable is: # Generated by iptables-save v1.4.19