Do I have to return my old router if I purchased a G1100 Quantum Gateway?

I purchased a G1100 gateway from VZ and the range is terrible compared to my old MI424WR.
I want to use the old one as a bridge to boost signal in now weak and dead areas I never had before.
Since the price of my internet/phone bundle stays the same even though I purchased an "accessory" from VZ, why must I return it?

They want the old one back, or pay 99.99 pls tax for it. I don't understand, as my double play internet/phone plan details show router included in monthly service price no additional charge.
I spent a half hour with a rep on the phone, explained the G1100 problem, that it is a common complaint, and since I am already paying for the old router as part of my service plan, how can I be required to return it just because I paid for the new one and own it? Had I not purchased the new one, I would not have to return the old one. Logic please?
They denied knowing of any problems with the G1100, and could offer no reason why I need to return, other than the warning to send it back, or I WILL be billed for it. "My screen says you have to send it back" is not a reason!
I dislike the Verizon culture, as new customers are given great discounts and plans, but loyal long term ones are bullied with huge contract price increases and foolishness like this. Customer retention is not a priority to them, and they don't care if you stay, or go.
After my contract expires, I'm leaving for good. In fact, I regret renewing it in the first place.

Similar Messages

  • Do I need to return the old router from Verizon after I transferred to a new address?

    Hello,
    I was trying to return the old router that I had from my previous address. (They gave me a new one when I moved to the new house)
    But I didn't receive the return label. Where can I obtain it, and what address do I need to send it to?
    I tried calling the return department but I was on hold forever.
    I googled and see some people said that they won't want it back, but some people said they do.
    Please help..
    Thanks,
    Sylvia

    fat10000y wrote:
    Hello,
    I was trying to return the old router that I had from my previous address. (They gave me a new one when I moved to the new house)
    But I didn't receive the return label. Where can I obtain it, and what address do I need to send it to?
    I tried calling the return department but I was on hold forever.
    I googled and see some people said that they won't want it back, but some people said they do.
    Please help..
    Thanks,
    Sylvia
    As already said it depends on the model that you have. If you have an Actiontec they will proabably want it back, but if its an old Westell they won't.

  • I just received my new iPad air and would like to download or transfer my data from my old iPad to my new one.  I have to return my old iPad to my company On Monday and I wish to save as much data as possible

    I just purchased a new iPad air and need to transfer the data from my old iPad to the new one.  I have to return my old iPad to my company on Mon 2/17/14

    Connect the old iPad to your computer's iTunes and copy your purchases off it and over to your computer's iTunes via File > Devices > Transfer Purchases, then take a backup of it (File > Devices > Back Up) and restore that backup onto the new iPad (restoring a backup onto a different device won't copy passwords, so you will need to enter your email account passwords, router password, and any passwords stored on Safari on your new iPad).
    Backups and restores : http://support.apple.com/kb/HT4079

  • I have a 5 year old Dell PC and purchased the Airport Express last year.  After one of the iphone 4s updates I lost the contact and cannot reestablish.  I have even tried to hard wire from my router to the airport express and I cannot connect.

    I have a 5 year old Dell PC and purchased Airport Express last year.  I used my iphone 4s to connect and it has been working until recently I lost connection after one of the iphone updates.  I cannot make contact with the unit.  I have even used an ethernet cable that I hooked to my router and still won't work.  I cantinually get this message from Airport Utility.  An error has occurred and I can not do anything else.

    If you have the AirPort Express setup in Bridge Mode, try changing the Connection Sharing setting to "Share a public IP address"
    AirPort Utility - Manual Setup
    Click the Internet icon
    Connection Sharing = Share a public IP address
    Update
    You will probably get a message about a Double NAT error. Click to "ignore"
    This setting might allow mutliple devices to connect and may not. It's worth a try...I have about a 60-70% success rate at hotels with this setting.
    Unfortunately, as you note....hotels have become a lot smarter about connections to their network. At some point, they probably will not even allow another router to connect at all.

  • Why do I need to return the old part, if I purchase a new part?

    Well, I had a problem with my motherboard, and got it replaced by an on-site tech HP sent me.
    The notebook is well out of warranty, aand I paid for the new motherboard+labor.
    However, when the tech showed up, he said he won't replace the motherboard unless I give him the old motherboard. He went on to say that this was the "company policy" and he won't let me keep any old part even if I pay for the new part.
    I was too tired t o argue with him, and he replaced the motherboard, and took away the old motherboard.
    On second thought, this is pretty absurd.
    It's like HP telling me "If you purchase a new HP notebook, you'll have to return your old HP notebook back to us".
    It would make sense if I was getting a free replacement and the notebook was under warranty. It doesn't make any sense when the notebook is out of warranty and I'm paying for the replacement part.
    Think of it, when I purchased the notebook, i obviously paid for the motherboard that came with the notebook. So why does HP get to take it away from me?
    If I purchase a new battery from HP store instead of amazon, do I need to return my old battery to HP?
    If I purchase a new keyboard from the HP store, do I need to return my old keyboard?
    I can give you the case number if you want.
    Honestly, if this is the "company policy", I won't ever bother with another HP product again.
    This question was solved.
    View Solution.

    HP only has new motherboards. They sell the bad ones into the Chinese market and they show up on eBay and similar places. You have a new motherboard. If you can tell us the part number of what you bought we can tell you the "full" price and the "exchange" price of the part. They should definitely explain the options to you but I think they likely assume you want the lower exchange price. 

  • Verizon G1100 Quantum Gateway router spurious 5Ghz output channel

    Anyone seeing this situation? About a week ago I installed a new G1100 Quantum Gateway router without any problems. I have a desktop PC with a 5GHz WiFi adapter card and a Kindle Fire HD which use channel 149 at 5GHz. I also have an IBM Thinkpad using the 2.4GHz channel 11. The Kindle has a WiFi Analyzer app which allows me to view the activity on both 2.4GHz and 5GHz. Until about two days ago the WiFi analyzer and the Wireless Network Connection display on the desktop PC showed only one signal in the 5GHz band. Since then they both show two identical signals on channel 149 which have the same strength but different identification info. If I change the channel it just shifts both signals together. I spent almost an hour with a tech on live chat yesterday. He "looked" at  the router and asked a lot of questions. He tried some things from his end with no change. He finally suggested doing a factory reset. I tried that today and still no change. I'm beginning too  think I have a defective unit. The spurious output hasn't caused any problems so far but I find it very strange.

    Since I posted the original inquiry, I have talked with Verizon tech people twice with no resolution. The last person agreed to send me another router. After a week or so it had not arrived so I inquired and the customer service rep couldn't find a tracking number. A second one was sent out and as luck would have it both arrived within a day or two of each other. So then I had three routers. I put one of them in service and got the same result, two signals on the same channel in the 5Ghz band. I then plugged in the other router but did not connect the FIOS cable to it, just let it sit there by itself. My WiFi scanner on the kindle showed only one signal at 5Ghz for this router and two signals for the router connected to FIOS. I then swapped routers, connecting the single signal router to FIOS and  putting the two signal router aside. The WiFi scanner now showed two signals on the router which previously had only one signal at 5Ghz!!! The two signal router which was now not connected to FIOS still showed two signals also. Apparently, the routers initially have single signals when manufactured but FIOS software programs the device resulting in a different signal spectrum probably due to the security encoding algorithms utilized. By the way, depressing the factory reset button for 10 seconds or more does not return the router signal spectrum to a single signal. Also, I have not seen this characteristic in the 2.4Ghz band while using WEP encoding (my old laptop does not support anything else). The 5Ghz band uses WPA2.

  • G1100 Quantum Gateway Router MOCA LAN Password

    Am unable to set the MOCA LAN password on the G1100 to encrypt the MOCA LAN to anything other thatn the default.  It takes the new password but when you apply it it reverts to the original default.  This is a security issue as it is the default password that it published in the instructions, makin the internal LAN MOCA that runs under the Condo vulnerable.  Have been in touch with tech support twice and been told that this will have to be addressed in a new firmware version.   Is this a known issue?  Any way to document this somewhere so that it will get resolved in a future release?  Tech support not able to help and referred my to this board in last session.  I would assume a update request or trouble ticket would need to come from Verizon directly to the manufacturer or the firmare techs, and not from a verizon forum??  Anyone else experience this issue?  Please note that this is on the MOCA LAN *NOT* the MOCA WAN.    My router and ONT are provisioned to ethernet on the WAN side.  Appreciate any insight as to resolution or new firmware relesase dates.

    Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you.
    Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
    Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions.
    To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe".
    Please keep all correspondence regarding your issue in the private support portal.

  • I can't purchase, it's said if i want to purchase an item i have to use my old apple id. I forgot the old one. What can i do?

    I can't purchase, it's said if i want to purchase an item i have to use my old apple id. I forgot the old one. What can i do?

    I forgot the old one, totaly forgot. So i make the new one
    Everytime i want to buy or purchase something, it's said i have to use my old apple id to purchase or but that item
    What can i do?

  • I have an airport extreme and express, if I use the extreme as a base station connected to my old router can I use the express to extend the signal while also creating a new network that only I can use?

    I have an airport extreme and express, if I use the extreme as a base station connected to my old router can I use the express to extend the signal while also creating a new network that only I can use? Essentially having two wifi connection off the same network? If so how do I set this up?

    Extending using a wireless connection always results in a performance compromise.
    If the Express is going to extend using a wireless connection, then the Express will need to be located about half way between the AirPort Extreme and the general area where you need more wireless coverage. The more that you have line-of-sight between the Extreme and Express, the better the network will operate.
    Remember......the Express can only "extend" the quality and signal speed that it receives, so it needs to be located where it can get a very good signal from the Extreme. Although Apple cleverly uses the term "extend", a more accurate term for the Express would be "repeater".
    If the Express will extend by connecting to the Extreme using a permanent, wired Ethernet cable connection......highly recommended for best performance.....then the Express can be located exactly where you need more wireless coverage. There is no signal loss at all through the Ethernet cable, so the Express gets a full speed signal no matter where it might be located.
    Post back to let us know which way to you want to go.

  • I have the airport express as router can I buy the new airport express and use my old airport to extend my net?

    I have the airport express as router can I buy the new airport express and extend my net?

    Things can get confusing pretty quickly since there are 3 different versions of the AirPort Express.
    If by "old", you mean you have Model No A1084 or A1088 AirPort Express (look at the label on the side of the device for the Model No), it cannot be used with the "Extend a wireless network" feature of other newer Apple routers.
    If your AirPort Extreme is "square" shaped with rounded corners, then the "old" AirPort Express will not work with your AirPort Extreme using the "Extend a wireless network" settings.
    You could use a "previous version" AirPort Express, Model No A1264 to "Extend", or the "new" AirPort Express, Model No A1392, for that purpose.
    If your AirPort Extreme is a simultaneous dual band product, then the "new" Express would be able to "extend" both bands.  The "previous" AirPort Express (Model A1264) would be able to extend only one band, since it is not a dual band device.

  • E3000 Pressed reset button on back. I just want my old router back :(

    Hey all. I have an E3000 router that I love.  One day after coming back from a vacation, I noticed another computer that wasn't mine connected to my network(I live in an apartment complex).  I tried logging into my router but had completely forgotten the login info.  Knowing me I push buttons first, ask questions later and hit the reset button on the back.  Terrible idea, I had no internet connectivity at all wired or wireless.  The only way I could connect was through my modem.  After chatting with Cisco tech support and changing a bunch of ips, dns.  I was able to connect wireless devices.  But something was still missing.  My printer would still not connect, and my NAS was unreachable.  Here is where you guys might help me.  Is there any way to return my E3000 back to its original fresh out of the box state?  I was able to connect everything to it and everything played nicely with each other. Please, I just want my old router back!
    Thanks
    Eric

    wumbo6 wrote:
    when i chatted with the cisco support guy he walked me through manually changing all my settings.  yea i tried power cycling.
    Can you tell what is the IP address of the router? the printer and the NAS?
    Yesterday is history. Tomorrow is mystery. Today is a gift.

  • No Return Label for Router return

    I received a new router for my broken one.  I am suppose to return the old one with in 7 days.  Do not know where to send it, since you did not send me a prepaid return label.

    How old is your current router? Have you tried asking Verizon to send a return label, letting them know of the situation (in case they did say you will absolutely be billed for non-return)?
    ========
    The first to bring me 1Gbps Fiber for $30/m wins!

  • Returning an old phone on Edge?

    I recently used the Edge program to get a new iPhone 6. I still have my iPhone 4, and want to avoid the $200 charge (I upgraded on Early Edge and returning the old phone is a requirement). However I have no idea where to mail my old phone or how to make sure it is associated with my account. I went to my local Verizon store and they said they could not take it there. Any help?

    Here's the link.  You have to log in and it should take you directly to the label page.  I've heard that using Internet Explorer is a better option than using Chrome or Firefox when trying to print the label.
    VerizonWireless.com/printlabel
    Good luck!

  • Not very relevant, but how do I replace my old router with a new one?

    Recently I got a new router and I don't really know how to install it. When I first moved into my house, the guys from COX (my local internet service provider) had to come in, plug in the modem and router, go outside to the electrical box, flick some switches in there, and finally got my router working.
    I'm afraid that if I unplug the wires connected to my old router and plug it into my new router, I might reset everything and the COX guys have to come again and all that.
    So how do I replace the router without causing chaos?

    By reading the user manual that came w/your router, contacting the manufacturer and/or visit their customer support/troubleshooting website. 

  • Can I turn my old router into a Wireless Acess Point?

    I have recently found my old BEFW11S4 V4 Wireless Router. It has the latest firmware. What I was wondering is it possible to turn it into an Access Point, so that I can increase the range of my Wireless Network. I currently have A wireless router on my network. Any help would be great. Thank you.

    Never mind, I figured it out on my own

Maybe you are looking for