Do i have to select all the key figures when i design a query off of a cube
Do i have to select all the key figures when i design a query off of a cube? i have three keyfigures on the top of the three keyfigures it says calculated keyfigure. kind of lost dont know what to do. please let me know.
Thanks!
York
No, you have to select at least one.
Calculated keyfigure (CKF) means it's a formula of two or more other keyfigures. You can select, right-mouse click, display properties and you see how it is composed.
Under calculated keyfigures you see all available keyfigures of the infoprovider you build the query on. Just move them by drag-and drop from the left to the right into the columns.
You can have also restricted keyfigures (RKF). This means a keyfigure is restricted by one or more characterstics and their values.
Hope you got an idea.
Regards,
Juergen
Similar Messages
-
Why does Captivate have to convert all the PPTX slides when I only want two?
Hello friendly people : ) ,
I often import Power Point slides into my Captivate projets. Even when I only want two slides from a large Power Point presentation, Captivate converts every slide, and this of course, take quite a bit of time. Is there any way around this?
Thank you.
RyanHi Ryan,
How Captivate does import is, it fetches all the PPT/PPTX source content in the import process and then produces the Selection box where you can choose what all slide you want to bring in and then on proceeding it converts those slides to Cp compatible Slide structure and introduces them at the stated slide location.
What, I understand (Looking at your other thread) you do not link and re-import all slides after making any small change. So, if these modifications are being made by same individual on same machine, he can simply right click and edit the presentation from PowerPoint and save it to bring all the changes (this can be done without switching to linked in library).
Thanks,
Anjaneai -
And I checked my email and apple said that my songs were ready to be downloaded and when I went , it had no active downloads
Hi OverratedBacon,
Thanks for using Apple Support Communities. I would first try downloading the songs from your past purchases by following the appropriate steps here:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
If you're still unable to receive your preorder, you may want to report this to the iTunes Store:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/ht1933
Cheers,
- Ari -
The logics for ALL calc key figures (CKF) - Table available?
Hello experts,
I am going through a project here to convert a lot of CKF / RKF in BI Queries.
There are 100's of them and what I want to do is to be able to see all the formula's used in one list as opposed to go through each on in query designer which is , as we all know, a big pain to use.
Is there a table in BI (RSZ something?) which will give me a list of all the CKF's in the system and the arthimatic used to calculate them... most of the CKF's im interested are calculated using RKF and is usually simple logic.
If there is an easy way of seing the formula then this will help me lots.
thanks for any ideas
Iksit
(BI7)Hello Sudheer
2LIS_02_HDR, ITM and SCL do not take data from S011 but directly from transactionnal tables like EBEP, EBKO, EBPO (names quoted from memory).
So you have to look for the key figures from those tables and not the one in S011.
Historically, the three datasource were built to replace 2LIS_02_S011 but the calculations to rebuild the keyfigures were delivered in BW in an old BCT that made the conversions. The logic and modeling have changed completely.
If you really need to transfer S011 to BW without remodelling the data, you may want to use a generic extractor based on S011 (provided you have a delta key available).
Otherwise, in SBIW, Options for datasource specific to the application, Logistics, purchasing, you have two customizing transactions. you have to define branch and process key to load data into BW. But that will not have any effect to LBWE.
Hope this helps.
Regards
Fabrice -
How to select all the lines of table control
Hi all,
In table control, I have more than 100 records. My requirement is I have to select all the records when I press check box in the table control. Please guide me in this regard.
Searched in sdn before posting.
Thanks,
regards,
Murali Krishna. TPROBLEM SOLVED
-
Select all the text on a page by touching an area that is white space
I have read that you can select all the text on a page by touching an area that is white space, for example at the edge of a column. Sometimes this works for me, but most of the time it does not. Should it? Is there more to it? Is this a documented gesture?
I want to be able to select all the text in a long page, where it would be very tedious to drag the copy handles. This would be the equivalent of CMD A on a computer.Yea, thanks, I've read that. It doesn't cover selecting all the text in one gesture, which is what I want to be able to do. This doesn't seem to be covered.
I've been fooling around since I wrote the first post, and discovered that if you tap and hold to display the selection buttons (as noted in your quote) and then drag one of the blue selection buttons to the top (or bottom) of the text, then the other button will jump to the bottom (or top) and you have effectively selected all the text. This is what I wanted to do.
The reason I wanted to do it is so I can select all the text in an article that I want to read, then copy and paste it into an app I just got, Speak it!, and then have the app read me the article while I get some exercise riding my stationary bike. -
Select all the dates between two txt fields. how?
In a 6i form cursor I need to select all the dates between two provided dates. I have two text fields FLD1 and FLd2 with date datatype. There is no table behind both the fields.
For example
:FLD1:='01-MAR-2013';
:FLD2:='10-MAR-2013';
Now I have to select all the dates from 01-mar-2013 to '10-mar-2013'. how to do it?Gul wrote:
In a 6i form cursor I need to select all the dates between two provided dates. I have two text fields FLD1 and FLd2 with date datatype. There is no table behind both the fields.
For example
:FLD1:='01-MAR-2013';
:FLD2:='10-MAR-2013';
Now I have to select all the dates from 01-mar-2013 to '10-mar-2013'. how to do it?As'salamualikum Gul
Try this
SELECT TO_DATE('01-MAR-2013', 'DD-MON-RRRR') - 1 + rownum AS d
FROM ALL_OBJECTS
WHERE TO_DATE('01-MAR-2013', 'DD-MON-RRRR') - 1 + rownum BETWEEN TO_DATE('01-MAR-2013', 'DD-MON-RRRR') AND TO_DATE('10-MAR-2013', 'DD-MON-RRRR')Hope this helps -
Can i use the key figure total delivery time in days in rows and how is can
Dear all,
Can i use the key figure total delivery time in days in rows and how is can.but all the key figures r used in rows but i cannot use in column.i want bothin rows and in column at a time ,can this is possible,and how.Hi,
yes you can.You will have to use structure in the row.
Right click on the row and create a new structure.
In this structure you can add key figure.
Maximum number of structure a query can have is two
Please assign points if it helped you.
Regards,
Senoy -
Key Figure in a Input Ready Query
I have 9 key figures in my input ready query. 5 of them are not input ready and being loaded through a job and 4 are input ready. There is a problem with one key figure, I am able to see data for the key figure when i have START QUERY IN THE CHANGE MODE turned off. But once I turn it on it is not showing any data for the key figure. This is happening only wiht that key figure, all the other key figures are working fine. Could someone help fixing this
Thanks
Rashmi.Hi,
I do face this type problem during my BI IP implemenation project. Pls chk thoroughly the following points.
1.The planning mode of your real-time infocube should be on always on( you need change from load to planning mode, while inputting data).
2.The START QUERY IN THE CHANGE MODE , should be on.
3.In the planning tab of key figures, ensure you enable the button : Data can be changed using planning functions.
4.In the advanced tab of key figures, pls make sure to enable the right button( Master data).
5.Pls make sure , the real time infocube, aggregation levels, filters etc, should be refreshed & active,if make any changes in planning model in between, in Aggregation levels,filters etc.
6. Pls chk the locks( SM12) always, and delete all of them, if any.
7. Log-off the Server (BEX/DWWB) and restart the BEX ,then open your Input query, it should work .
Regards
CSM Reddy -
i have a black box always coming on my desk top , telling me every command that i am doing , it happened when i pressed all the keys on my keyboard.
Hi Josh,
Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
Thanks.
Mike Towns -
How to select all the colomns_names from a table, with their datatypes ..
hi :)
i would like to know, how to select in SQL all the columns names from a table with their datatypes so that i get something like this :
Table 1 : table_name
the column ID has the Datatype NUMBER
the column name has the Datatype Varchar2
Table 2 : table_name
the column check has the Datatype NUMBER
the column air has the Datatype Varchar2
and that has to be for all the tables that i own ! ..
P. S : i m trying to do this with java, so it s would be enough if you just tell me how to select all the tables_names with all their colums_names and with all their datatypes ! ..
thank you :)
i ve heard it can be done with USER_TABLES .. but i have no idea how :( ..
Edited by: user8865125 on 17.05.2011 12:22Hi,
The data dictionary view USER_TAB_COLUMNS has one row for every column in every table in your schema. The columns TABLE_NAME, COLUMN_NAME and DATA_TYPE have all the information you need.
Another data dictionary view, USER_TABLES, may be useful, too. It has one row pre table. -
I have two Macs: an MBA and the new iMac. Is there a way to have iTunes and all the content in it identical on both machines?
Yes you can copy the content to your new machine and use Home Sharing to keep the content identical
Connect the two machines via an ethernet cable it is 3 times faster than Wifi. Turn wifi off on one machine to enforce ethernet connection
In System Preferences, Sharing turn on File Sharing
Then
Copy the music/itunes folder from the Macbook pro to the music/ folder on the imac
Both machines should now have the same library
Disconnect H the ethernet cable
Set up Home Sharing and under Settings at the bottom of the Home Sharing page. Select to transfer new purchases.
Do the same on the other machine.
Then when you r machines are connected by wifi and each time you start itunes it will transfer your new purchases
Setting up home sharing -
Since I downloaded Maverick, I cannot find my External Hard Drive in the "Finder" area. I have to unplug all the time the hard drive to be recognized by my iMac. How can I fix this problem? Thank You.
Check Finderr->Preferences->General and ensure that HDs are selected for display. If so and they still don't, Reset the NVRAM/PRAM and Reset the SMC, and see if that does the trick.
-
i have just followed all the instructions in support to remove duplicates from my library but now most of my music is gone except for my recent purchases. How come and how do i fix it?
Final Cut is a separate, higher end video editor. The pro version of iMovie.
Give iPhoto a look at for creating the slideshow. It's easy to assemble the photos in an album in iPhoto, put them in the order you want and then make a slideshow of them. You can select from various themes and transitions between slides and add music from your iTunes library.
When you have the slidshow as you want use the Export button at the bottom of the iPhoto window and export with Size = Medium or Large.
Save the resulting Quicktime movie file in your Movies folder.
Next, open iDVD, choose your theme and drag the QT movie file into the menu window being careful to avoid any drop zones.
Then follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
The reason I suggest iPhoto is that I find it much easier to use than iMovie (except for the older iMovie 6 HD version). Personal preferences showing here. -
To select all the checkbox using valuechangelistner
Hi ,
I have a jsp where the check boxes are populated dynamically.
i have one more check box to select all the check boxes. (like Select all)
i have written a method in a bean and i have bound that as value changelistner. when i check values in console the check box value is true but the same is not reflected in UI and also when i click delete button the value of the checkbox will be false..
The value change listner methid is "toggleCheck"
Please do needfull in this regard..
here is my code....
Bean code :
package com.dyna;
import java.util.ArrayList;
import java.util.List;
import javax.faces.component.UIData;
import javax.faces.component.UISelectBoolean;
import javax.faces.event.ValueChangeEvent;
* @author Bharathk
* TODO To change the template for this generated type comment go to
* Window - Preferences - Java - Code Style - Code Templates
public class Output {
static ArrayList list = new ArrayList();
private UIData table;
private UISelectBoolean sb=null ;
private UISelectBoolean sbAll=null;
static int count = 0;
* @return Returns the list.
public ArrayList getList() {
return list;
* @param list The list to set.
public void setList(ArrayList list) {
Output.list = list;
* @return Returns the sb.
public UISelectBoolean getSb() {
return sb;
* @param sb The sb to set.
public void setSb(UISelectBoolean sb) {
this.sb = sb;
* @return Returns the sbAll.
public UISelectBoolean getSbAll() {
return sbAll;
* @param sbAll The sbAll to set.
public void setSbAll(UISelectBoolean sbAll) {
this.sbAll = sbAll;
* @return Returns the table.
public UIData getTable() {
return table;
* @param table The table to set.
public void setTable(UIData table) {
this.table = table;
public List add(Input obj) {
Input in = new Input();
in.setId(obj.getId());
in.setName(obj.getName());
list.add(in);
return list;
public List add(Input obj, int index) {
Input in = (Input)list.get(index);
in.setId(obj.getId());
in.setName(obj.getName());
list.set(index, in);
return list;
public void deleteobj(Output obj){
int Rc = table.getRowCount();
System.out.println("THIS IS IN DELETE");
for (int i=0; i<Rc; i++) {
table.setRowIndex(i);
System.out.println("FROM DELETE------" +obj.sb.isSelected());
if(obj.sb.isSelected()) {
System.out.println("FROM DELETE");
list.remove(i);
public void toggleCheck(ValueChangeEvent event){
int rc = table.getRowCount();
System.out.println("THIS IS IN TOGGLE");
if (sbAll.isSelected()){
System.out.println("THIS IS IN TOGGLE--IN IF");
for (int i = 0; i< rc;i++) {
table.setRowIndex(i);
// table.setRows(rc);
sb.setSelected(true);
System.out.println("THIS IS IN TOGGLE--CHECK--- "+this.sb.isSelected());
else {
System.out.println("THIS IS IN TOGGLE--In ELSE");
for (int i = 0; i< rc;i++) {
table.setRowIndex(i);
sb.setSelected(false);
/*for (int i = 0; i< rc;i++) {
table.setRowIndex(i);
System.out.println("THIS IS IN TOGGLE--CHECK--- "+this.sb.isSelected());
// FacesContext.getCurrentInstance( ).renderResponse( );
"Here is my jsp code........."
<%@taglib uri="http://java.sun.com/jsf/core" prefix="f"%>
<%@taglib uri="http://java.sun.com/portlet" prefix="portlet"%>
<%@taglib uri="http://java.sun.com/jsf/html" prefix="h"%>
<%@taglib uri="http://www.ibm.com/jsf/html_extended" prefix="hx"%>
<%@page language="java" contentType="text/html; charset=ISO-8859-1"
pageEncoding="ISO-8859-1" session="false"%>
<portlet:defineObjects />
<LINK rel="stylesheet" type="text/css"
href='<%= renderResponse.encodeURL(renderRequest.getContextPath() + "/theme/stylesheet.css") %>'
title="Style">
<f:view>
<hx:scriptCollector id="scriptCollector1">
<%-- jsf:pagecode language="java" location="/JavaSource/pagecode/Sample.java" --%><%-- /jsf:pagecode --%>
<P>Place content here.</P>
<h:form styleClass="form" id="form1">
<TABLE>
<TBODY>
<TR>
<TD align="left">Id:</TD>
<TD style="width:5px"> </TD>
<TD><h:inputText id="text1" value="#{inp.id}"
styleClass="inputText">
</h:inputText></TD>
</TR>
<TR>
<TD align="left">Name:</TD>
<TD style="width:5px"> </TD>
<TD><h:inputText id="text2" value="#{inp.name}"
styleClass="inputText">
</h:inputText></TD>
</TR>
</TBODY>
</TABLE>
<h:messages styleClass="messages" id="messages1"></h:messages>
<BR>
<hx:commandExButton id="button1" styleClass="commandExButton"
type="submit" value="Submit" action="#{pc_Sample.doButton1Action}">
</hx:commandExButton>
<h:selectBooleanCheckbox styleClass="selectBooleanCheckbox"
id="checkbox1" binding="#{op.sbAll}"
valueChangeListner="#{pc_Sample.op.toggleCheck}" onCleck="this.form.submit();"></h:selectBooleanCheckbox>
<BR>
<hx:commandExButton type="submit" value="Delete"
styleClass="commandExButton" id="button2" action="#{pc_Sample.doButton2Action}"></hx:commandExButton>
<BR>
<BR>
<h:dataTable id="table1" value="#{op.list}" binding="#{op.table}" var="varlist" styleClass="dataTable" headerClass="headerClass"
footerClass="footerClass" rowClasses="rowClass1"
columnClasses="columnClass1" border="0" cellpadding="2"
cellspacing="0">
<h:column id="column4">
<f:facet name="header">
<h:outputText styleClass="outputText" value="Select" id="text13"></h:outputText>
</f:facet>
<h:selectBooleanCheckbox styleClass="selectBooleanCheckbox"
id="checkbox12" binding="#{op.sb}" ></h:selectBooleanCheckbox>
</h:column>
<h:column id="column3">
<f:facet name="header">
<h:outputText styleClass="outputText" value="SlNo" id="text10"></h:outputText>
</f:facet>
<h:commandLink styleClass="commandLink" id="link1" action="#{pc_Sample.doLink1Action}">
<h:outputText id="text20"
value="#{op.table.rowIndex+1}"
styleClass="outputText">
</h:outputText>
<f:param name="Id" value="#{varlist.id}"></f:param>
<f:param name="Name" value="#{varlist.name}"></f:param>
</h:commandLink>
</h:column>
<h:column id="column1">
<f:facet name="header">
<h:outputText styleClass="outputText" value="Id" id="text31"></h:outputText>
</f:facet>
<h:outputText id="text4" value="#{varlist.id}"
styleClass="outputText">
</h:outputText>
</h:column>
<h:column id="column2">
<f:facet name="header">
<h:outputText styleClass="outputText" value="Name" id="text5"></h:outputText>
</f:facet>
<h:outputText id="text6" value="#{varlist.name}"
styleClass="outputText">
</h:outputText>
</h:column>
</h:dataTable>
</h:form>
</hx:scriptCollector>
</f:view>http://forums.ni.com/ni/board/message?board.id=60&message.id=8565&query.id=128811#M8565
Maybe you are looking for
-
I have an Iphone 5 and i had all the apps on there that I wanted but then had to create a new account for the phone. I cant do the updates becuase of not having the same account I downloaded them on. So when I try to delete them and then get them aga
-
when the phone is in sleep mode or screen is lock I dont get push notifications means wifi disconnects but i didnt have problem when I purchased it. Also some times all pending push notifications comes by itself I dont get the same problem when I sta
-
How to tell which pages are linked to a template
How can you tell, from a template, all of the pages which it affects. I have some "junk" templates that are from previous experiments which I am trying to remove, I wouldn't want them to be a part of something important.
-
Convert into Data Table issue from Excel Sheet Table
Hi i've excel file where 10-12 sheets are available in that excel file.one of the sheet is named as summary.there are 8-10 tables(named as Table1,Table2,Table3....) in that summary sheet as well. i've to actually get the Table1 from the summary she
-
I'm the only one with a Mac - all relatives have PCs and I can't get IChat to view anyone using either MSN Messanger or AIM - anyone have any solutions? I can do messaging but I can't see video.