Do I need a transformer to plug my iMac into an Italian power socket?

I've just moved from Seattle, Washington to Milan, Italy.  The iMac specifications say it can handle 110 to 250 volts and 50 to 60 hertz power.  Do I simply buy a US-to-Italian power-socket adapter and plug it in or do I need a special transformer?

No transformer required - just the adapter!

Similar Messages

  • Have plugged my ipod into 24 volt truck socket. is it able to be fixed?????

    is my ipod fixable i plugged it into 24v truck??
    Message was edited by: daleharris

    iPods don't take the vehicle voltage directly so you have to use a USB to iPod lead, and USB is 5V. Automobile adapters expect 12V and convert to 5V so you might have blown up the adapter but it should protect the iPod if it sees 24V, but this isn't guaranteed. Depending on the quality of the adapter, it might work fine at 24V continuously, or work for short periods at 24V before shutting down, or blow itself up, or allow more than 5V to the USB, as the quality of design goes down. So if you used a cheap adapter, it could have allowed more than 5V through the USB and this could damage the iPod. It might still work, but after being stressed by more than the specified maximum voltage, it might not.
    I'd leave it for an hour in case any internal component got hot, then try turning it on when its not plugged into a charger. Then I'd try charging it using an approved method (USB to computer or an Apple mains charger). If neither work, you are going have to take in for repair/replacement.

  • Can I use my mac book pro with 120 volt and 240 volt power supplies?  Does the power converter automatically switch, so I just need a different adapter plug?

    I got my mac book pro in the U.S., but I will be travelling to where there is 240 volt power.  Does the mag safe power adapter switch automatically, so I just need a converter plug, or do I need a transformer to convert from 240 to 120 volts?  Thanks.

    Hi,
    I too bought my Macbook Pro in the US and I live in the UK (its so much cheaper in the US! No 20% VAT!)
    The power adapter does work on UK 230v power. You can also get a three pin extension lead (like the 2 pin US one that came with the MBP) for about £3 with free delivery from Amazon UK.
    Another tip, whne you are back in the UK, and you are switching from a PC to a Mac, get in touch with your local Apple Shop who run one to one free courses on how to use your MBP.
    Hope This Helps!!

  • I moved from the UK to the US with my iMac. What do I need to buy for the UK iMac to work in the US? A power convertor? A plug convertor? or Both?

    I moved from the UK to the US with my iMac. What do I need to buy for the UK iMac to work in the US? A power convertor? A plug convertor? or Both?  I had previously read that you only need a plug convertor (three prong to two prong).  But I'm terrified that my iMac will blow up if I only use a plug convertor and not some sort of voltage convertor (Transformer).

    I'm not really hardware tech savy - is it easy to pop out the UK power cable and plug in the US power cable? Or do I need to get someone like an iMac support guy to do this? And because of the voltage difference, is there something built into the iMac that takes care of the voltage difference for me?  Thanks!!

  • Do I need a transformer to use my macbook in europe?

    I have a Macbook bought new in spring of 2008, with a 60 W magsafe power adapter.  It was bought in the USA and I've always used 110 AC to power it.
    I'm traveling to France, where power is 220 volts.  It sounds like the magsafe power adapter automatically switches between 110 and 220.  Is this true?  In this case, all I would need is the correct plug adapter, but would not need a transformer?
    Thanks!

    Hi William: Indeed it is true, the power adapter is capable of working with voltages from 100 - 240. You will need a plug adapter only.
    Stedman

  • Traveling to Israel next week, do I need a transformer to charge iPhone 5s or will it automatically convert to 220 current?

    traveling to Israel next week, do I need a transformer to charge iPhone 5s or will it automatically convert to 220 current?

    The hotels I stayed in during my visit to the Holy Land had a plug for electric razors which has the same plug used in the US. With that I didn't even need the adapter.
    Allan

  • Need to transform CC7 to CC11 in live performance

    I need to Transform CC7 messages to CC11 in live performance of organ plug-ins.
    My MIDI controller has a single CC Pedal jack, labeled Volume, to which I have a CC pedal connected. It indeed controls the volume of my plug-ins.
    I need to build a Transformer to change CC7 volume messages into CC11 expression; but have been unsucessful.
    Can anyone explain the steps in doing this?
    Thanks,
    William

    The easiest way to do this is to open the Environment and find your way the the "Clicks and Ports" layer. From here you should at least have a Physical Input Object (Logic's way of saying "Communicate with the driver for this MDI interface") and a Sequencer Input (an extra step that makes the end user tell Logic "Hey, I want you to record all incoming MIDI data"), something most other pieces of software do automatically.
    Now, create a new Transformer object and cable it between the Physical Input and the Sequnecer Input.
    The routing will look like this: Physical In -> Transformer -> Sequencer In. In this example we will be destructively changing ALL CC#7 messages into CC#11 which will then be sent into the Sequencer where they can be recorded if you so choose.
    Double click on the Transformer Object and make the following settings. In the Top Row of the Transformer set the Status field to "Control", leave the Channel Field on "All", and change the -1- Field to 7. What you have done is told the Transformer to look for incoming messages that are Controller #7 on any MIDI channel. Now we need to tell it what to do with these messages.
    In the Bottom Row you can leave the Status as Thru (this will cause the output message to be the same status as the input. In our case "Control"). Again, leave the Channel Field as "Thru" but change the -1- Field to 11.
    This will cause the Transformer to take any incoming CC#7 message on any MIDI channel and convert it to CC#11.
    Hope this helps.
    -Mike Ayotte

  • I have bought Apple TV from USA ...do I need a transformer for voltage as I am going to use it in INDIA

    I have bought Apple TV from USA ...do I need a transformer for voltage as I am going to use it in INDIA

    Just plug it in. If its the same plug
    And remember dont eaty too much curry while watching Apple TV.

  • HT3492 What do I need to do to use the iMac as a monitor from my HP laptop? I have my HP connected to the Mini DisplayPort to VGA adapter which is plugged into a Thunderbolt port.

    What do I need to do to use the iMac as a monitor form my HP laptop?  I have my laptop connected to the Mini DisplayPort to VGA adapter which is plugged into a Thunderbolt port.

    vga may not be a compatible port
    https://discussions.apple.com/thread/2246912?start=0&tstart=0
    more hits
    https://www.google.dk/search?source=ig&hl=da&rlz=1G1TSEH_ENDK367&q=use+imac+as+m onitor+for+pc&oq=use+imac+as+mon&gs_l=igoogle.3.0.0l10.2417776.2420497.0.2421354 .15.11.0.2.2.0.316.1723.0j4j3j1.8.0...0.0...1ac.-OkFwmTKBg0

  • HT201269 I have an IPhone 4 that turns off.When I plug the phone into a outlet, it says to connect to iTunes. But my phone doesn't connect. I need to backup info to sync to a new iPhone. Is there another way to get the info from the old one?

    I have an IPhone 4 that turns off on its own. When I plug the phone into an outlet, it says to connect to iTunes. When i connect my phone to itunes, the screen displays the apple icon and doesn't connect to iTunes.  I need to backup info on this phone so I can apply my back up to a new iPhone. Is there any another way i can do this? My older phone will not show it's connected to iTunes. I used iCloud on the phone with problems, but I didn't back up all the info thru iCloud. Is there another way to back up?

    Sounds like your phone is in recovery mode.  In this case, all data on it is gone.  There's nothing to back up.

  • I'm always losing all of my music and get a lot of apps that i don't need when i plug my i4 into my mac. I only ticked the box 'Manually manage music and videos' but it's always syncing itself. How can i prevent this? I don't want to put bacPlease Help!!!

    I'm always losing all of my music and get a lot of apps that i don't need when i plug my i4 into my mac. I only ticked the box 'Manually manage music and videos' but it's always syncing itself. How can i prevent this? I don't want to put back 1500 any more because of this. Please Help!!!

    I'm always losing all of my music and get a lot of apps that i don't need when i plug my i4 into my mac. I only ticked the box 'Manually manage music and videos' but it's always syncing itself. How can i prevent this? I don't want to put back 1500 any more because of this. Please Help!!!

  • HT1535 When I plug my ipad into the computer to sync a message pops up saying it can not sync because there is not enough memory in the itunes library. Do I need to increase the memory in my itunes library and how?

    When I plug my ipad into the computer to sync a message pops up saying that the ipad can not sync because there is not enough memory on the itunes library. Do I need to increase the itunes library memory and how do I do this, or do I just need to trasnfer things out of itunes? Thanks.

    Try
    iOS: Device not recognized in iTunes for Windows
    I would start with              
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if computer or iPod problem

  • Can I plug my iPad into an outlet in France for recharging, or do I need a converter (besides de adapter...)?

    Can I plug my iPad into an outlet in France for recharging, or do I need a converter fo the voltage?

    No converter needed, just an adaptor

  • I need help! i downloaded new music and plugged my iphone into my computer and after i did that i lost all my pictures and everything that i need!!! it restored my iphone back to setting from february of last year when i last had an iphone, HELP! PLEASE!

    I need some help fast please!! i have had the iphone since august and have videos and pictures i need like 100% need, and today i downloaded music and plugged my phone into my computer. The phone synched and it did to the settings when the iphone 4 first came out last year, dating back to when i first had it on february 24th, 2011. I need to restore it back but everytime i try to do it through itunes it puts me back to the same settings, i hope someone knows how to fix this problem, i would greatly appreciate any help!!!!

    Check here and see if you got an automatic backup when you pluuged into iTunes.   (Fingers Crossed) 
    Documents and Settings\USERNAME\Application Data\Apple Computer\MobileSync\Backup
    If the recent backup is there, simply restore your phone from that backup.  It sounds to me that instead of syncing the phone just by connecting it to the computer, you may have restored the phone to your ancient backup.  No problem if you have the newer backup, but a huge problem if you don't have the recent backup.
    If, in fact, you did restore the phone instead of getting a backup thru the (automatic) sync process, I'd strongly suggest getting the difference between the two straight in your mind.
    My other suggestion would be to understand that your iPhone is "managed" thru iTunes.  You need to connect the two whenever possible instead of using the charger.

  • I have a 3GS iPhone, version 3.1.2.  I have never plugged my phone into a computer or synced with iTunes.  If I do so now, I will I lose everything?  What steps need to be taken to ensure that all of my data, contacts, photos, etc. are not lost?

    I have a 3GS iPhone, version 3.1.2.  I have never plugged my phone into a computer or synced with iTunes.  If I do so now, I will I lose everything?  What steps need to be taken to ensure that all of my data, contacts, photos, etc. are not lost?

    IOS: how to back up  http://support.apple.com/kb/HT1766

Maybe you are looking for

  • How can I restore my itunes data from an old hard drive?

    Hey guys I hope this isn't confusing... but! My motherboard on my computer died yesterday, and I had to buy another computer. I had 2 hard drives in my old computer and also an usb external drive that had all my music on it. Now here is the problem..

  • Photo Stream Doesn`t work on the iPhone

    Hi, My iPhone share it`s Photos with my iPad and iPod, but does not receive any photos from them. The iPod and iPad share the photos between them perfectly. iCloud and Photo Stream on my iPhone are on. Any help? Thanks

  • How does iTunes handle dither?

    I have a few lossless .m4a files that happen to be 32 bit, and I want to make them into 16 bit .wav. With iTunes set to use the wave encoder, you can right-click them and "create WAV version", but it comes out as a 16 bit file. Does it dither in the

  • For Skype my camera doesn't come on. Face time it works fine

    My video camera won't turn on during skype calls But for FaceTime it works fine - can anyone advise?

  • Cancel the excise invoice through J1IEX

    Hi 1)  My client has captured the excise through J1IEX 2)  The excise has been captured 3)  Necessary Accounting entries has been captured in the RG23A registered 4) Now my client wants to cancel the doc 5)  the tried to cancel through J1IEX 6) but t