Do i need an updated vision acquisition software with LV 8.5

i have been using LV 7.1 with vision acquisition software installed from cd that came with IMAQ card. i installed a full developement of LV8.5 and when i installed vision acquisition software there are no VIs that show up in the "vision and motion" functions. i need to find IMAQdx functions to read my 1394 IEEE camera.
is this a version issue? what can i do to get tthe 1394 functions in LV8.5.
thanks
NI vision acquisition: version 8.2.3
Labview: version 8.5
Message Edited by arawtry on 09-23-2008 11:14 AM

Dear arawtry,
Yes, this looks like a version issue. You need NI-IMAQdx 3.1 or later, which comes with Vision Acquisition Software 8.5 or later. You can determine version requirements from the following KnowledgeBase article:
NI-IMAQ and NI-IMAQdx Compatibility with Different LabVIEW Versions
http://digital.ni.com/public.nsf/allkb/6B55FF09D1FBD3108625719600650B7C?OpenDocument
I believe downloading and installing the latest version of the Vision Acquisition Sofware should solve your problem:
Vision Acquisition Software 8.6
http://joule.ni.com/nidu/cds/view/p/id/1099/lang/en
Best Regards,
~Nate

Similar Messages

I need to update my iphone software, but I get a message saying that I need to transfer my songs from my iphone to itunes first. There used to be a Transfer link on the summary page when I connected my iphone to my macbook, but I am unable to find it now.

I need to update my iphone software, but I get a message saying that I need to transfer my songs from my iphone to itunes first. There used to be a Transfer link on the summary page when I connected my iphone to my macbook, but I am unable to find it now.

Welcome to the Apple Community.
Select the device from the device list, then file > devices > transfer.

HT1338 Just bought a new iPod - says I need itunes 10.7 - downloaded it, now says I need to update my OS software. I go to update my OS software and it says I'm up to date - any advice?

Just bought a new iPod - says I need itunes 10.7 - downloaded it, now says I need to update my OS software. I go to update my OS software and it says I'm up to date - any advice?

Your Tag states you are running OS X 10.5.8 = Leopard... If this is the case... read on...
The first step in Upgrading... is to Snow Leopard = OS X 10.6.x
It is Not available as a download... It is a Paid Upgrade.
Do this first...
Check that your Mac meets the System Requirements for Snow Leopard...
Snow Leopard Tech Specs
http://support.apple.com/kb/SP575
If so... Purchase a Snow Leopard Install Disc...
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Other countries...
http://support.apple.com/kb/HE57
After the Successful Install, run Software Update to get the latest updates for Snow Leopard and iTunes.
Be sure to make a Backup of your Current System Before Upgrading...

Vision acquisition software, library activation

I am having a problem and I would be very grateful if you kindly help me through. I have labview 2011 installed and licensed on my pc, I also installed the ¨vision acquisition software¨ from the Divers CD. Now after a while the vision acquisition library has stopped working and ask for activation. I have bought the vision acquisition software separately and I have the activation code, but I could not find a way to activate the installed library on my pc. I would appreciate if you kindly respond at your earliest convenience.
Solved!
Go to Solution.

Hello,
try locating and running "C:\Program Files (x86)\National Instruments\Shared\License Manager\Bin\nilmUtil.exe".
(x86 on my computer!)
This is the license manager, where you can activate your license. Right click on "Vision Acquisition Software" and activate. Follow the instructions.
Best regards,
K
https://decibel.ni.com/content/blogs/kl3m3n
"Kudos: Users may give one another Kudos on the forums for posts that they found particularly helpful or insightful."

HT1222 What is this 4 digit pass code I need to update my iPhone software?

What is the 4 did hit pass code I now need to update my iPhone software?

You're referring to this window on your iPhone?
It's what Azeman described.
OT

Does NI-MAX(NI Vision Acquisition Software) support USB3 Vision?

i has a Basler USB3 camera, which supported USB3 Vision. and then , i plugin this camera to my computer and setup the driver for it.
i setup VAS_2013_2.exe which said that ie support USB3 Vision。 after this， i run NI MAX， and i cannot find any device under "Device and interface" node;
So, i want to known that does NI-MAX support USB3 Vision?
thanks in advanced
Solved!
Go to Solution.

That version of Vision Acquisition Software doesn't support USB3. NI is adding support for USB3 with NI Vision Acquisition Software August 2013 (should be released during NI Week).
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies

How to build an installer including the vision Acquisition Software

hi all, my question is "how to build an installer including the Vision Acquisition Software".
is it enough to select "2010 Run-Time Engine" "Vision Run-Time Engine" and "NI-IMAQdx"? Its ok with the "2010 Run-Time Engine" but there is some problem with the other two.
can some one help thanks a lot!

hi again, i have some problem with install Vision Run-Time Engine
must i install RTE with the Serial Number, or i can chose the "install this product for evaluation" to continue the installing, maybe active it later. But after i chosed "install this product for evaluation" and finish the installing, i still cant find RTE from my disk.
i cant even chose my path to install the RTE. Can u plz tell me what is wrong with that?

I have Microsoft Office 2004 on my MacBook (2.4 GHz Intel Core 2 Duo). It is currently up to date with Microsoft updates. I am running Mac OS 10.6.8. I just updated my Mac software with "Security Update 2012-001". I am now unable to print (Epson NX510

I have Microsoft Office 2004 on my MacBook (2.4 GHz Intel Core 2 Duo). It is currently up to date with Microsoft updates. I am running Mac OS 10.6.8. I just updated my Mac software with "Security Update 2012-001". I am now unable to print (Epson NX510 printer) from Excel or Word. When I click on the Print menu item in Excel, there is a flash in the background like it is trying to open the print window, but nothing else. I am able to print from other programs like TextEdit, Mail or KakeidaGraph. As far as I know I have the latest Epson print driver.
Also, I am also unable to open an existing Excel or Word file from the open menu - both programs lock up and do not respond. I have to force quit. After I restart Excel or Word I can open an existing file by double clicking on the file, but if I again try to open another file from the open menu, Excel or Word lock up.
Any similar problems?

Howdy,
Apparently some are reporting that this causes the older PowerPC (PPC) applications that are supported in 10.6 via 'Rosetta' to crash upon attempting to open/save/print using any dialog box, or fail in other similar ways such as simply not printing or quitting, or freezing/hanging/crashing of the application.
I have read of some companies that have indeed submitted proper bug reports to Apple, but that is not a guarantee of a bug-fix being issued.
You might wish to read:
http://www.macintouch.com/readerreports/snowleopard/index.html#d02feb2012
If you are unsure if you are still using PowerPC apps, if the application is currently running, look under the 'Activity Monitior' (in Applications -> Utilities), or alternatively you could check in the System Profiler, Applications. Check the column "Type".
Here is a fairly simple way you can restore you system and restore you applications functionality again, if you don't have a recent clone or good Time Machine backup that you can restore from. If you do, restore from your backup prior to having installed the Security Update 2012-001.
Time Machine restore: http://support.apple.com/kb/ht1427
If you are restoring a backup made by a Mac to the same Mac
With your backup drive connected, start up your Mac from the Lion recovery partition (Command-R at startup) or Mac OS X v10.6 installation disc. Then use the "Restore From Time Machine Backup" utility. Select the backup prior to your issues, and it will be restored back to the state it was in at that time.
If you can't easily restore from a backup, you can instead do the following:
- You first start by reinstalling your OS X 10.6.x, this will preserve all your user data, your applications, no worries there.
- Then install the Mac OS X 10.6.8 Update Combo v1.1 (links provided below)
- Make sure you're printers are showing up correctly in your system preferences, if not, re-add the printers
- Then finally, run the Apple Software Update (by pulling down the Apple Menu), and install any and all remaining updates, except do not then re-install the Security Update 2012-001. It is possible that you may have to reboot after installing some of the updates, and you may even need to run it a 2nd time to make sure that you've got all updates, except NOT the Security Update 2012-001.
Links for 10.6.8 Update Combo v1.1:
http://support.apple.com/kb/DL1399
or the link to directly download this 1.09GB combo updater:
http://support.apple.com/downloads/DL1399/en_US/MacOSXUpdCombo10.6.8.dmg
Cheers,
Daniel Feldman
=======================
MacMind
Certified Member of the
Apple Consultants Network
Apple Certified (ACHDS)
E-mail: [email protected]
Phone: 1-408-454-6649
URL : www.MacMind.com
=======================

I have an Airport Express that I am trying to use connected by ethernet to my iMac G4 running Mac OS 10.4.11. I need to update the Airport software in order to use security option WPA2 Personal. I currently have Airport software v. 5.6.1.

I have an Airport Express that I am trying to use connected by ethernet to my iMac G4 running Mac OS 10.4.11. I need to update the Airport Express softwart in order to use security option WPA2 Personal to connect to the internet through my Airport Extreme. I currently have Airport Express software version 5.6.1. How can I update this software? (I can connect directly to my Airport Extreme by ethernet and download the update that way). Is a later version of A E software available for download anywhere? Any suggestions would be greatly appreciated.
Thanks.

Download and install AirPort Utility 5.4.2 for Mac OS X 10.4.11 "Tiger" here:
AirPort Utility 5.4.2
Once installed, launch AirPort Utility. It will tell you if a firmware upgrade is available for your Express.

HT1338 I need java update or java software for mac

I need java update or java for mac. I keep updating software but java is not there, can you please help?

Open up Java preferences located in your Application>Utilities folder. Make sure it's enabled. Mac automatically disables it if not used within a certain amount of time.

HT1349 First of all, I have just purchased a iMac and I tried installing my Logic Express 9.0 and it won't work. Gives me an error message. I searched the internet and found i need to update it to run with Lion. Tried to download but my SerNum doest work.

Can anyone help me please. I tried installing my Logic Express 9.0 but it states I need an update. Ok.. great. So i tried to download it via apple.com but my serial number doesn't work. I can't even schedule an appointment with them because I am in Italy now. Can anyone show me how I can fix this proble. Either download the update thtat allows my iMac to run Logic express 9 or get apple.com to help me. Either or would be appreciated.! Thank you!

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

In OWB I need to update the target table with same field for match/update

In OWb I am trying to update the target table with the match and the update on the same field can this be done. I am getting a error match merge error saying you cannot update and match on the same field. But in SQl my select is
Update table
set irf = 0
where irf = 1
and process_id = 'TEST'
Hwo do i do this in OWB.

table name is temp
fields in the table
field1 number
field2 varchar2(10)
field3 date
values in the table are example
0,'TEST',05/29/2009
9,'TEST',05/29/2009
0,'TEST1',03/01/2009
1,'TEST1',03/01/2009
In the above example I need to update the first row field1 to 1.
Update temp
set field1 = 1
where field1 = 0
and field2 = 'TEST'
when I run this I just need one row to be updated and it should look like this below
1,'TEST',05/29/2009
9,'TEST',05/29/2009
0,'TEST1',03/01/2009
1,'TEST1',03/01/2009
But when I run my mapping I am getting the rows like below the second row with 9 also is getting updated to 1.
1,'TEST',05/29/2009
1,'TEST',05/29/2009
0,'TEST1',03/01/2009
1,'TEST1',03/01/2009

Update ALL adobe software with RUM

I've created an internal AUSST server and I'm using RUM to update the Adobe software on the clients machines.
After running RUM all the Adobe software seems to be fully updated but when I on InDesign and Folio Builder it tells me there is an update avalible.
Is it possible to include the DPS Tools within AUSST and RUM?
Thanks.

Iam not so used to RUM yet, but it worked fine for me with AUSST 2.0.
Are the updates available and downloaded at your server?

I have an old 1 phone 3 gs and need to update to ios software but when enter settings , general on phone there is no " software Update " option - how can i update to later version of ios ?

I have an 1 phoe 3gs and need to download newer version of IOS but when n settings , general - there is no Software Update option - how can i update to a leter version of IOS ?
THANKS

Update it from iTunes on a computer as described at the bottom of this article; devices running an iOS version prior to 5.0 can't be updated straight from the device. It will be updated to the newest iOS release supported by the device’s hardware.
The maximum iOS version for the fourth generation iPod touch and iPhone 3GS is 6.1.3.
(92514)

My MAC did a software update tonight and now my mail wont load, it is teeling me I need to update my mail software, can someone tell me how to do this please?e

My mac updated softwar tonight and now I have no mal, can someone tell me how to udate my mail sofware please ?

I assume you're talking about Security Update 2012-004 for Snow Leopard? Have you by any changed moved your Mail application out of the Applications folder? This will cause updates to fail to work - Apple's included applications should always be left where Apple installed them.
If this is the case, move it back, then downlad the update from Security Update 2012-004 (Snow Leopard) and run it again.

Do i need an updated vision acquisition software with LV 8.5

Similar Messages

Maybe you are looking for