Do i need any SAP product

Hi All,
I need some help to develop a SAP interface that can make communicate between SAP application and our application. I am pretty new to SAP. I have installed “PDK” and “Sneak Preview SAP NetWeaver 2004”. I don’t have any other SAP product on my system.
Do I require any SAP product or SAP membership to perform these tasks or is it part of “SAP NetWeaver 2004”? Where from I can start if I m not SAP customer or partner?
Regards,

hi,
First you should become a SAP customer and implementation of SAP will be done. Only then SAP products can be used. However, it is not possible for you to download any SAP product and start using it immediately.
Regards,
Karthik
Note: Pls award me pts if useful

Similar Messages

  • Java CAPS SAP IDoc OTD thru IDOC descriptive file needs any sap jars and dd

    Hi All,
    I am doing PoC in Java CAPS using SAP IDoc Descriptive file. As I know for creating SAP IDoc OTD thru it will need certail jar filr and ddls. But creating SAP IDoc ITD thru IDoc descriptive file also we need certain jar files and DLL.
    Please let me know on this.
    Thanks in advance.

    Yes, you will need all of the required SAP JCo jars and DLLs even though you are using the IDoc description file. This link might be useful to you - [Creating a SAP ALE OTDs Wizard|http://docs.sun.com/app/docs/doc/820-4380/dsgn_sap-ale-otd_t?a=view]

  • IS SAP product is part of u0093Sneak Preview SAP NetWeaver 2004u0094

    Hi All,
    I need some help to develop a SAP interface in .NET based windows application.
    I am new to SAP. But I have some theoretical knowledge about .net compatibility with SAP (know about PDK and SAP .net connector).
    I have installed “PDK” and “Sneak Preview SAP NetWeaver 2004”
    Do I require any SAP product or SAP membership to perform these tasks or is it part of “SAP NetWeaver 2004”?  Where from I can get it if I m not SAP customer or partner?
    Regards,

    Thanks Subhash,
    I was unable to find the "SAP Solutions Manager" under the path that you mentioned.
    However, I had also written to SDN_subscriptions@SAP. According to them, the installation key can be requested at https://www.sdn.sap.com/irj/scn/subscriptions/instkey-request. I will follow this link and try it out.
    Thanks again.
    Regards,
    TS

  • I recently loaded OSX mavericks on my Imac. I now find I cannot open any Adobe products from CS5. The error message reads " to open Adobe illustrator CS5.app, you need to install a JAva SE 6 runtime. Would you like to check and install one?

    I recently loaded OSX mavericks on my Imac. I now find I cannot open any Adobe products from CS5. The error message reads " to open Adobe illustrator CS5.app, you need to install a JAva SE 6 runtime. Would you like to check and install one? I try to install but get the error" download error". As far as i know I'm using Adobe Java 7. None of my CS5 suite works anymore............and i really dont want to upgrade to a monthly cloud service fee as i hate this policy with a passion.

    This goes for Dreamweaver CC on Mavericks!!!!! THANK YOU!
    I couldn't launch Dreamweaver CC. An error told me to install "java se 6 runtime". But when I clicked  OK I got another error telling me there is a network problem! I found this forum post on CS6 products, so I tried the download link, installed java 6 and presto, it worked! Thanks!

  • How do you test any SAP objects before a transport to the production server

    How do you test any SAP objects before a transport to the production server?

    Hi Rama Krishna,
       The actual process is develop the object in development system and unit test there with the available data.
      Then move it to Quality server where the data will be the actual replica of production and where the integration testing and ened to end testing happens and also the user acceptance testing  happens there.
    and once everything is found fine there then it is moved to production system.
    Award points if this is helpful.
    Regards,
    Ravi G

  • BPC link with any other SAP products?

    Hi, Prakash
    I am wondering how BPC communicate with any other SAP products? using RFC? Can we load the data from ECC into BPC?
    Thanks
    C.S.

    Hi Chimei,
    We are currently going to kickstart our BPC project.
    We went through the process of evaluating products which can help easy extraction of data from SAP products into Outlooksoft.
    There is a company called ERPLink which has a product suite called iNet.BI which helps enable this. It is very inexpensive (17K for software with 17% annual maintenance charges). This product is SAP certified and has ability to read metadata from SAP modules. It can extract data from BW environments (Cubes, queries of ODS objects) and from R/3 environments (via ABAP report programs with their embedded macros & direct table views). From the product demo, the user interface seemed simplistic. The product is installed on the Outlooksoft environment and uses SQL*Server Information Services (DTS packages) to do the load from SAP source system to Outlooksoft.
    You might want to consider this product as an alternative to Flat File loads.
    Hope this helps.
    Regards,
    Abhay Shanbhag

  • Looking to replace my Mac Pro 2.1 graphics card with one that is silent with at least 2 DVI outputs (needed for audio production), any recommendations?

    Looking to replace my Mac Pro 2.1 graphics card with one that is silent with at least 2 DVI outputs (needed for audio production), any recommendations?
    Thanks

    Thanks, but are these are silent?
    Why do they cost over 10 x what seems available for PC?
    Is it not possible to flash the cards for mac?
    Something similar to a ASUS Geforce 8400GS PCI-E 2.0 512 MB DDR2 Graphics Card EN8400GS Silent/P/512M?

  • I have purchased Priemier Elements 12 for Windows and Mac. I need to download Pre 12 for my new Window 8. I cannot find any Adobe products I have purchased in my account. Please help, I don't have a backup CD.

    I have purchased Premiere Element 12 for Windows and mac. I cannot find any Adobe products I purchased so I can download Pre 12 to my new Windows computer.

    Hi,
    Please use this link for downloading premiere elements 12 on windows.
    http://www.adobe.com/cfusion/tdrc/index.cfm?product=premiere_elements&loc=us
    Thank You
    Arjun

  • Confirm Production on any open production order

    Hello Gurus.
    Our company receives material at the end of the production line and they need to report this production in the system. The problem is that at this point, they don't know what Production Order it relates to.
    Is there a transaction in SAP that allows you to report production and then apply this to any open production order that currently exists? For instance, apply it to the first open production order in the system.
    Somewhere where all the user would need to type is the material and quantity. The production order would be selected automatically.
    Thanks!

    Thanks for your replies.
    Regarding REM, I know how to set it up; however, we need to have Production Orders in place in order to drive the requirements of components.
    With REM, how would you know which components you need to purchase? Would you need to then use Re-order point planning or fixed forecasts in order to purchase them in time?
    It would be great if it was possible to use REM to receive the assemblies on stock, but instead of getting the results in a Product Cost collector, you would reduce open production orders. Though I understand this may not be standard functionality.

  • New forum needed on SAP Event Management

    I currently run 2 forums with around 300 users on SAP Event Management. I had to create private forums because none is available on SDN.
    SAP Event Management is a seperate module that used to only exist on SAP SCM but it is now and add-on module for SAP ERP, SNC, AII and TM.
    Who else sees the need for a forum for this incredibly useful tool?

    i fully support the need of separate forum for SAP EM (or SCEM) . if you go back to the history in early 2000 when we first launched EM we use to have stand alone and i believe only in SCM40 it got merged and now again we have different deployment opportunities.
    Considering cross industry functionality and applicability of SAP EM and specific industry like logistics and transportation industry, this need would be greatly justified.
    I am not sure whether this specific request have been taken to SAP product management but in any case i am planning to approch sap product managers from my end as well.
    Thank you for taking up this initiative.
    Valan
    SAP America.

  • Installation of SAP Productivity PAK - Installation Guide

    Hi Everybody,
    We need to install SAP Productivity PAK . I am looking for more information on this in terms of Installation guide, pre-requisites, installation steps and configuration steps. I would appreciate if any of our members help me by sharing the relevant documents. Please share/send me the required info.
    Regards,
    AmKo

    Hi AmKo,
    Have you SAP Productivity PAK already downloaded from the SMP?
    If so, then please have a look at this KBA.
    [1600355|http://service.sap.com/sap/support/notes/1600355]- Installation files for SAP PRODUCTIVITY PAK 4.3
    Let me know if this helps,
    Kind Regards,
    Matthew

  • SAP Productivity Pak for Us customer

    Hello Experts,
    We have a requirement from client to install the RWD productivity pak for training documents and I have heard this name first time and I already instaalled the Solman 7.1 and Dev box of CRM 7 EHP 1 and ECC EHP 5. I have below queries-
    1) Is basis responsible to install RWD Productivity pak.
    2) Do we need to install this software on each users machine or we need to install it on our ecc/solman/crm servers on each box (DEV,QAS, PRD).
    3) What are the installation steps and the prerequisites.
    4) Do we require extra hardware ? with some environment and if we require to integrate it with SAP with steps or guide.
    5) I checked it on service mkt place and version 4.3 and 4.4 is avl so which version should i prefer.
    Regards
    Saurabh Mishra

    sorry, too busy with messages these days.
    RWDuPerfServer43P_1-10009622.ZIP
    RWDuPerfServer43P_2-10009622.ZIP
    These are patch but not the installation file.
    For installation, goto:
    -> Service.sap.com/swdc
    -> Installations and Upgrades
    -> Browse our Download Catalog
    -> SAP Education Products
    -> SAP PRODUCTIVITY PAK BY Ancile
    -> SAP PRODUCTIVITY PAK 4.3 (or 4.4)
    -> Installation
    -> Downloads
    -> Product ID Application Instruction SAP Productivity Pak
    - Can we install database , application and search index on same machine ?
    Yes
    - OS is windows (2003, 2008, Win 7, Vista or XP ???), Is RWD only supported on 32 bit windows with IA processor or any processor ?
    64 bit can also be supported but Ancile programs are written for 32 bit. it can work with 64 but still on 32 bit mode.
    - Where can I find the installation document or all the prerequistes ?
    after extracting the packages downloaded from SMP, you will get the administration guide, which includes the installation guide.
    - Which database is preferable SQL, oracle or DB2 , currently we have SAP system on DB2
    emmm... SQL is simple to use. xxx doesn't like oracle. no idea for DB2....
    - Do we need to integrate the RWD with all SAP system landscapes ?
    If you want to use Help LaunchPad for All  the SAP systems, you will need to import the HLP addon to each of the system (ABAP side).
    - Also suggest the hardware requirement (RAMprocessorhard disk space) if 1 server installation is possible for all the req (Search Server + Database Server + Web Application Server + Administrator Workbench)
    Not much idea for sizing. depends on the workload...

  • Need to test Production Backups on another server.

    Dear Expert,
    Our SAP Production server is running on HP-UX in cluster mode (ECC 6.0 with oracle 10g). We have sheduled Incremental database online backup (daily) and Full database online + redolog backup (on sunday) on disk, and getting successfull backups.
    Now we wanted to test our backup, as it is a running production server so wanted to try on diffrent server.
    So we are installing new server on windows 64bit machine with  orale database. Our plane is to copy backupfiles  of production server to newly installed server and try to restore it.
    We need your suggetions on it and the correct way to test the backups if any.
    As it is highly important activity, so please revert ASAP.
    Regards,
    Ajit

    Hi Ajit,
    I would recommend to test this scenario on HP-UX system only as your production server is on the same operating system.
    If there is no urgency for testing the production backup, you can wait until your Quality Server refresh cycle.
    You can refresh the Quality server using online/offline backup restore method (backup of production server).
    This way, you will get 2 benefits..
    1. Your Quality server will be refreshed with production data
    2. You can test Production backup consistancy more efficiently.
    Refer the link below for more details:
    For Official System Copy Guide:
    [https://websmp207.sap-ag.de/form/sapnet?_SHORTKEY=01100035870000659894&|https://websmp207.sap-ag.de/form/sapnet?_SHORTKEY=01100035870000659894&]
    Another Short steps:
    [http://www.saptechies.com/system-copy-guides/|http://www.saptechies.com/system-copy-guides/]
    Regards.
    Rajesh Narkhede

  • Do we any SAP Standard program to Send IDOC of Type CODCMT01

    Do we any SAP Standard program for outbound processing for IDOC Type CODCMT01
    Message was edited by: Vipin Nagpal

    - If it is for test purpose only, you could use transaction WE19 (Test Tool).
    - As well you could write your own program and user MASTER_IDOC_DISTRIBUTE function module... but in this case you need to fill yourself the fields of the IDOC
    - as well you can have a look at function group KALE...
    E.g. function module K_DOCUMENT_SEND

  • Two SAP production systems in a single physical server

    Dear All,
    Is SAP support installing two SAP production systems like SAP ECC 6.0 of one customer and ECC 6.0 with a different SID and instance no. for another customer in a single physical server? Would like to know from the experts is this possible? If yes ,  what are the things to take care of this design if any?
    Thanks
    Hany

    Hi ,
    check below blog
    You can check the following blog https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/5124. [original link is broken]
    It helps you to understand different logon pages for portal
    Koti Reddy

Maybe you are looking for