Do I need Logic Pro 8.0.1 Update, and if so, how do I get it now?

Do I need Logic Pro 8.0.1 Update, and if so, how do I get it now?
Tuesday, 2008-07-29
Due to prolonged illness, I purchased the Logic Studio Upgrade version (I already had Logic Pro 7.2.3, with dongle) only last week. Logic Studio Upgrade version initially installs Logic Pro version 8.0.0. I then dutifully set out to download both the Logic Pro 8.0.1 Update and the Logic Pro 8.0.2 Update.
As of this week, all attempts and maneuvers to simply get the Logic Pro 8.0.1 Update have failed. I cannot even find it, let alone download it!
Yes, I've tried the relabeling juggling act to fool Software Update into eventually listing and providing both the Logic Pro 8.0.1 Update and the Logic Pro 8.0.2 Update—but no luck, not any longer. These moves may have worked up until relatively recently, but they do not work now, at least as of this week.
All searching of Apple's site(s) and Support pages results in nada—Apple itself no longer lists any such file/dmg/download/update anywhere! All previous links are either dead or just dump one back on to the Logic Pro 8.0.2 Update page.
(In my many searches, I noted what seemed to me to be a majority of opinion that the Logic Pro 8.0.1 Update was a dog, especially in Mac OS X Leopard 10.5.2 or 10.5.3. Many users reported crashes, panics, and.or freezes. Is this why Apple has pulled the update and rendered it extinct?)
I Googled, I Asked Why, I Cuiled—but no Logic Pro 8.0.1 Update, except as that which lurked in the murky warez waters. Still, frustrated as I was, I did even try all such I could find . . . but no third party-hosted update worked at all.
I am concerned because in all my previous experience with Apple and its applications, ample information is made readily available about the contents of any update and an explanation of its relationship to previous updates. By this latter I mean: Apple indicates that update "x" incorporates the previous updates "u" and "v"; therefore one can proceed safely to install update "x" even if one missed updates "u" and "v" or for whatever reason did not install them.
So . . . do I need Logic Pro 8.0.1 Update, if I am then going to further update with the Logic Pro 8.0.2 Update? Does Logic Pro 8.0.2 Update incorporate the changes made in Logic Pro 8.0.1 Update? Will I be missing (critically?) something(s) in Logic Pro 8.0.1 Update if I in fact do not ever get it or install it? And how would I know? Apple has not only removed the update and all traces of it, but Apple has also removed all information about Logic Pro 8.0.1 Update—it is now literally as if it never existed.
So what's a po' boy to do? Logic Pro 8.0.1 Update cannot now be found on VersionTracker or MacUpdate or anywhere else. To date, no user group or organization or educational institution or program or audio-related company posted it or archived it.
Where/how can I get a copy of the Logic Pro 8.0.1 Update?
If I can't, what do I do?
If I can't, what do I miss?
And where is Apple's support for Logic Studio/Logic Pro in all of this?
Earnestly hoping,
j.

Rodger,
Thank you for your gracious welcome . . .
and thank you for your swift response . . .
and thank you for your information (and encouragement!).
Yes, I read that too, but searched in vain for the specifity of, say, your direction:
"Go ahead and update to 8.0.2, as it contains the 8.0.1 update."
So I shall!
Again, many thanks.

Similar Messages

  • HT5146 I'm trying to install Logic Pro 9.1.7 update to Logic Pro 9.0.

    I haven't used Logic for a while on my studio iMac and need to install the latest update. If I try to open Logic 9.0 it says it won't work with my operating syatem. That makes sense as it won't work with Lion, it was working perfectly before I upgraded to Lion a while back so I know it's installed correctly. If I try to install the update to 9.17 it says it can't find Logic Pro in the Applications folder, and needs Logic 9.0 or higher. It's definitley in the Applications folder and starts to open from the dock so why won't the update 'see' it? Can anybody help please?

    This is probably the most given answer on this forum:
    there are TWO simple,  rules for updating.
    1. Logic Pro MUST BE in the Applications folder - not in any subfolder within the appilications folder. This seems OK in your case.
    2. Logic Pro MUST be called "Logic Pro". 8 letters and 1 space. Nothing more.

  • Im going to buy a macbook pro 13" 1199$ Is Logic Pro Good On Him? And Other Apple Software

    im going to buy a macbook pro 13" 1199$ Is Logic Pro Good On Him? And Other Apple Software
    Like iWeb, iMovie, And Staffs Like That?

    As a hobbyist dual core Macbook Pro 13-1nch will do fine.
    For professional work, you are better off with Macbook Pro 15-inch quad core i7..
    iWeb is no more available from Apple. You may  have to check Amzon for it.

  • Has anybody downloaded logic pro from the app store and how did it work thanks

    has anybody downloaded logic pro from the app store and how did it work?
    thanks

    I've recently upgraded my stuff with a Mac Mini Server and downloaded Logic from the app store with absolutely no problems at all. I'm on 10.7.3 with an i7 processor and 4Gb memory (yeah, may as well put another 4 in as well, I know).
    Logic 9.1.6 is running very smoothly for me, but I think I'll go to 9.1.7 because there is a malfunction with time stretching regions in the Arrange window that the update's meant to fix.
    A lot of your experience with downloading the additional content, apart from Logic itself, will depend on the speed of your internet connection, but the software handling of that aspect seems quite good - best to just load one lot of stuff at a time and see how it works out.

  • Has anybody downloaded logic pro from the app store and how did it work

    has anybody downloaded logic pro from the app store and how did it work?
    Thanks

    Hi ...
    Best way to get feedback form Logic Pro users is to post your question in that forum here.

  • Logic pro X 10.0.4 and EUCON problem - plug-ins name won't appear on the display of artist series

    Logic pro X 10.0.4 and EUCON problem - plug-ins name won't appear on the display of artist series
    I'm currently using mavericks , logic pro x 10.0.4 and eucon 3.0.1
    There was a freezing  problem which is now resolved by clicking the prevent app nap in the info  on eucon app and all my most used apps.

    Yes - it works exactly as it did in Logic 9 under ML - my problem under mavericks and pro X was sluggish updating of display - turned encoder on MC MIX and nothing happened imediately and names on MC MIX not updating properly.
    I only changed app nap to off - ie ticked it on get info panel of the EUCON application and relaunched whole lot and it as worked prefectly since (fingers crossed etc)
    Ian

  • Logic Pro 9 (9.0.0).   Message You can't use this version of the application Logic Pro 9 with this version of Mac OS X You have Logic Pro 9 9.0.0.   I have been told that I can use the Logic Pro 9.1.4 Update (.dmg) which you can download from Apple Logic

    Since upgrading to lion, I can't use Logic pro, hope someone can help.  thank you
    Logic Pro 9 (9.0.0).
    Message
    You can't use this version of the application Logic Pro 9 with this version of Mac OS X
    You have Logic Pro 9 9.0.0.
    I have been told that I can use the Logic Pro 9.1.8 Update (.dmg) which you can download from Apple Logic Support, although when I try to upgrade my I get this message:
    An eligible Logic Pro version was not found in the Applications folder. This update requires Logic Pro version 9.0 or higher.

    Since upgrading to lion, I can't use Logic pro, hope someone can help.  thank you
    Logic Pro 9 (9.0.0).
    Message
    You can't use this version of the application Logic Pro 9 with this version of Mac OS X
    You have Logic Pro 9 9.0.0.
    I have been told that I can use the Logic Pro 9.1.8 Update (.dmg) which you can download from Apple Logic Support, although when I try to upgrade my I get this message:
    An eligible Logic Pro version was not found in the Applications folder. This update requires Logic Pro version 9.0 or higher.

  • Logic Pro 9.1.3 Update available

    About the Logic Pro 9.1.3 update
    Resolves an issue introduced in Logic 9.1.2 where Logic might quit unexpectedly when opening if the Native Instruments Kontakt 4 Memory Server was already open.
    Resolves an issue introduced in Logic 9.1.2 where the Pedalboard stompboxes "Classic Wah" and "Modern Wah" sometimes stopped responding to mouse input.
    Logic will no longer stop responding during launch if the TouchOSC Control Surface plug-in is being used and the utility application from Objective Development called Little Snitch is configured to deny network access to Logic.
    Resolves an issue in Logic 9.1.2 that caused Logic to open fewer audio processing threads on i7 Quad-core Mac computers than it did in 9.1.1.
    Resolves an issue in Logic 9.1.2 where flattening and merging a Take Folder could result in an empty audio region if another track was soloed during the operation.
    Best,
    21th

    SparkyG wrote:
    Yep just saw that. It defaults to Automatic. which is certainly not optimal.
    I changed mine to 16 (the max I could see) and I can now get 80 tracks again. Perhaps automatic sets it to half the cores available leaving the rest for other tasks.
    What is noticeable though is the way it spreads the load is inconsistent and certainly not optimal. A few times it took 2 or 3 restarts to play high track counts and some of the restarts fully loaded the first 8 or 9 cores with nothing on the rest and it overloaded.
    So seems back to where I was which is great but the loading algorithm certainly does not look optimal or very quick at the moment, maybe for the future updates.
    At least the progress was fast and in a very nice way, giving control to the users. I like "pro apps" that let us choose!

  • TS3938 logic pro 7 won't open and power pc applications are no longer supported appears, can anyone help?

    logic pro 7 won't open and power PC applications are no longer supported appears, can anyone help?

    You'll have to update Logic Pro.

  • Logic Pro 7.2.1 Update is not recognizing my 7.2.0 app.  HELP!

    grrrrr, this is so frustrating!
    Logic Pro 7.2.1 Update is not recognizing my 7.2.0 app. Any ideas?

    To prevent cheating, the updater checks the receipts
    first — receipts files look like regular package
    files, but they're actually a list of pointers to the
    files installed from that package, together with
    their attributes: location, checksums, owner,
    permissions, and so on... That's how the repair
    permissions function works.
    If you messed with your receipts folder, you may be
    out of luck: in this case, re-installing everything
    will rebuild the receipts and the updating
    should take place.
    Yet another option would be to use Pacifist:
    http://www.charlessoft.com/
    • it allows the user to create receipts for [.pkg]
    packages
    • it can be used to force installation of any file
    from a given package
    Be aware that Pacifist doesn't run any of the
    pre-install, post-install, pre-upgrade, or
    post-upgrade scripts, doesn't check already existing
    receipts, and doesn't alter the permissions
    afterwards, so you'd better know what you're doing...
    nice illustration on the repair permissions....

  • Logic Pro 9 (9.0.0) and Lion OS X (10.7) incompatibility:

    Hello.
    I upgraded to OS X 10.7 and am loving everything about it except for the ability to use Logic Pro 9 (9.0.0).
    Message
    You can't use this version of the application Logic Pro 9 with this version of Mac OS X
    You have Logic Pro 9 9.0.0.
    I have been told that I can use the Logic Pro 9.1.4 Update (.dmg) which you can download from Apple Logic Support, although when I try to upgrade my I get this message:
    An eligible Logic Pro version was not found in the Applications folder. This update requires Logic Pro version 9.0 or higher.
    Wow, this is getting frustrating
    PS - For anyone using a Apogee Duet like me, Apogee says on their website that the drivers should be available in August 2011.

    I cant open my logic at all it just bounces onece and says this:
    Process:    
    Logic Pro [2764]
    Path:       
    /Users/USER/Desktop/Logic Pro.app/Contents/MacOS/Logic Pro
    Identifier: 
    com.apple.logic.pro
    Version:    
    9.1.6 (1700.43)
    Build Info: 
    Logic-17004300~2
    App Item ID:
    459578486
    App External ID: 4083251
    Code Type:  
    X86 (Native)
    Parent Process:  launchd [159]
    Date/Time:  
    2012-03-22 17:41:24.882 -0600
    OS Version: 
    Mac OS X 10.7 (11A390)
    Report Version:  8
    Interval Since Last Report:     
    21228 sec
    Crashes Since Last Report:      
    22
    Per-App Interval Since Last Report:  9441 sec
    Per-App Crashes Since Last Report:   20
    Anonymous UUID:                 
    F616925E-9433-47CD-B669-F8174595D539
    Crashed Thread:  0
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    /System/Library/PrivateFrameworks/ProKit.framework/Versions/A/ProKit
    Dyld Error Message:
      Library not loaded: /System/Library/PrivateFrameworks/ProKit.framework/Versions/A/ProKit
      Referenced from: /Users/USER/Desktop/Logic Pro.app/Contents/MacOS/Logic Pro
      Reason: image not found
    Binary Images:
    0x1000 -   0xbe3ffb  com.apple.logic.pro (9.1.6 - 1700.43) <24F0EC20-498D-6B24-193D-CAF74AA83457> /Users/USER/Desktop/Logic Pro.app/Contents/MacOS/Logic Pro
      0xe8d000 -   0xec0fe7  com.apple.music.apps.MAAudioUnitSupport (9.1.6 - 232.95) <0096DE94-CBD1-293B-6E75-72C64299119B> /Users/USER/Desktop/Logic Pro.app/Contents/Frameworks/MAAudioUnitSupport.framework/Versions/A/MAAudioUnit Support
      0xed7000 -   0xf08ff3  com.apple.musicaudiodataservices (1.1 - 250.78) <0C7147A5-C89A-8433-DCBD-99F6C2A0C889> /Users/USER/Desktop/Logic Pro.app/Contents/Frameworks/MAAssetSharing.framework/Versions/A/MAAssetSharing
      0xf1e000 -   0xf20fff  com.apple.ExceptionHandling (1.5 - 10) <CBB14B4E-835E-393B-B9B7-80E5A8B557B9> /System/Library/Frameworks/ExceptionHandling.framework/Versions/A/ExceptionHand ling
      0xf26000 -   0xf84ff3  com.apple.music.apps.MALoopManagement (9.1.6 - 218.80) <947687D9-EDE4-38BE-BBB3-F50FEE5E44E0> /Users/USER/Desktop/Logic Pro.app/Contents/Frameworks/MALoopManagement.framework/Versions/A/MALoopManagem ent
    0x8fe00000 - 0x8fe3320b  dyld (195 - ???) <33A6763E-295E-3FE1-9594-81B9E296BACC> /usr/lib/dyld
    0x9006a000 - 0x9006afff  com.apple.audio.units.AudioUnit (1.7 - 1.7) <4DCF450E-9748-3827-BF3C-EFEAF5E542C9> /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
    0x93f43000 - 0x93f50fff  libz.1.dylib (1.2.3 - compatibility 1.0.0) <4A5A98C6-C65E-37BD-BC0E-6E5C3BE74C60> /usr/lib/libz.1.dylib
    0x94368000 - 0x945deff7  com.apple.AddressBook.framework (5.1 - 1019) <7A59E861-A4C3-3BFA-8F8A-C054FDCFA3FD> /System/Library/Frameworks/AddressBook.framework/Versions/A/AddressBook
    0x954fc000 - 0x955ddfff  com.apple.DiscRecording (6.0 - 6000.2.11) <63D9A4D0-59F7-3716-8952-DB551677CE05> /System/Library/Frameworks/DiscRecording.framework/Versions/A/DiscRecording
    0x959f9000 - 0x95b4aff3  com.apple.audio.toolbox.AudioToolbox (1.7 - 1.7) <85616AA6-80D3-3ED1-8978-4B5080B8194B> /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
    0x9670e000 - 0x96716fff  com.apple.DiskArbitration (2.4 - 2.4) <B5535AAA-83EF-3E38-8D6E-EC383AE4926B> /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
    0x968fc000 - 0x9697fff7  com.apple.audio.CoreAudio (4.0.0 - 4.0.0) <4011757D-ED83-3C5B-92EA-F9563861B761> /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
    0x96b79000 - 0x96d4afff  com.apple.CoreFoundation (6.7 - 612.3) <D7532126-B03D-3671-8A2F-63EE67DE9832> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
    0x97819000 - 0x9787bfff  com.apple.framework.IOKit (2.0 - ???) <27AD0C95-0621-39A8-BC64-5D8ACFDA64DF> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
    0x98c46000 - 0x98c46fff  com.apple.Carbon (150 - 152) <32170CDA-C57B-32E0-91CF-E5BB31E5EA07> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
    0x9a547000 - 0x9a7cdfe3  com.apple.QuickTime (7.7.1 - 2199) <61D753A4-D0BA-3BE4-8DD7-D7F886C509D7> /System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime
    Model: MacBookPro7,1, BootROM MBP71.0039.B0B, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.62f6
    Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533654465238432D47372020
    Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533654465238432D47372020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 5.100.198.11 )
    Bluetooth: Version 2.5.0b13, 2 service, 12 devices, 1 incoming serial ports
    Network Service: Wi-Fi, AirPort, en1
    Serial ATA Device: Hitachi HTS545025B9SA02, 250.06 GB
    Serial ATA Device: MATSHITADVD-R   UJ-898
    USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0x24600000 / 2
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26100000 / 2
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x06600000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8213, 0x06610000 / 7
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0x06300000 / 3
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x06500000 / 2

  • Just installed logic pro 7.2 cross grade and an error comes up

    hi, i have a mac book pro 2.16 ghz 1 gbram i had logic pro 7.1.1 academic
    and i installed logic 7.2 cross grade and now when i open logic a messege comes up that says "project manager database on disk has got wrong version. rescanning required"
    then when i push ok logic unexpectedly quits. can some please help!!! thank you.
    MacBookPro1,2   Mac OS X (10.4.7)  

    Haven't heard of this problem before, but here's a suggestion that might work.
    In your ~/Library/Preferences/Logic folder you should find a folder named 'PM Data.'
    Perhaps if you dragged that folder to your desktop, your problem will disappear. Here's hoping…

  • Do I have to pay twice if I want to install Logic Pro X on my laptop and desktop?

    Do I have to pay twice if I want to install Logic Pro X on my laptop and desktop?
    Thanks

    If you purchase Logic Pro X, you can install it as many times as you want in all your Macs for free, always that your Macs are supported. You only have to pay the first time you download it

  • I need to run Illustrator in Rosetta Mode and the option isn't in Get Info

    Hello everyone,
    I need help. I need to run Illustrator in Rosetta Mode and the option isn't in Get Info.
    I'm using CS3 on a Mac Book Pro 2.16GHz with 2gigs of RAM. When I get info on the Illustrator App, there isn't a rosetta option.
    To be clear, I'm right-clicking on the icon in the dock, choosing 'show in finder', clicking on the Illustrator icon in there and there's no option.
    NOW, my copy of Photoshop HAS the option! It's in the general tab just over the Lock option.
    Any help would be greatly appreciated!!!
    Thanks!

    Trash your preferences for a starter.

  • I transferred my iTunes library from Window PC to MacBook pro and now I cant play songs that I purchased with an earlier ID and Password.  How can I get around this problem?'t

    I transferred my iTunes library from Window PC to MacBook pro and now I cant play songs that I purchased with an earlier ID and Password.  How can I get around this problem?

    Authorize the computer.
    iTunes Store: About authorization and deauthorization - http://support.apple.com/kb/HT1420 - and another helpful post: https://discussions.apple.com/message/17828050

Maybe you are looking for

  • Delivery times in australia

    How long does it take if you order online (aus) to get it delivered to Western Australia?

  • Identifying and grouping consecutive rows in sql

    I have following data set: CREATE TABLE APPS.T1   ROW_NUM               NUMBER,   EFFECTIVE_START_DATE  DATE                    NOT NULL,   EFFECTIVE_END_DATE    DATE                    NOT NULL,   STATUS                VARCHAR2(30 BYTE) SET DEFINE O

  • Finance charges on amounts outstanding over certain number of days

    We are implementing Finance charges in AR. We have a specific requirement that the finance charges need to be calculated on all invoices outstanding above 120 days. Presently when I run statements Finance charges are calculated from the due date to t

  • OWB Process flow deployment into auto sys

    Can some one tell us the steps to be followed for deploying the owb PROCESS FLOW into Auto sys. Thanks

  • JMS  publsig problem

    Hi, I am trying to develope a BPEL process which publish jms topic to oc4j jms jms/demoTopic.there I am getting error over there. Below is the error msg file:/C:/OraBPELPM_1/integration/orabpel/domains/default/tmp/.bpel_JMSTest1_1.0.jar/JMSSrv.wsdl [