Do I need more Resources?

I just upgraded to OXS10.4.4
Since doing so I've been running into situations where my keyboard stopsworking or it takes a long time to switch from one app to another, etc.
An example of what I might have open when this occurs is:
Quark
Photoshop
Safari
Entourage
MS Word
Logged onto 2 or 3 Win2k shares
If I get rid of an app though, it doesn't fix the issue.
Short of closing all apps and re-booting, I have tried to force quit/re-launch the finder and that seems to work.
Any ideas?

533Mhz? Yeah. I think using all those apps at once MAY bog u down a bit.
I recently upgraded to Tiger, and I got a bit carried away with Widgets. If i have even too many of those running, I get all slowed-up too.
I'm actually looking to upgrade my RAM as a result.
Typically, the more complicated an OS gets, the more resources it requires.
Beavis2084

Similar Messages

"Powermaps needs more resources to complete this operation" error. 2 datasets 100 rows. one tour. two layers

I'm working on some BI mashups to demo the powerbi offerings to potential clients, but I get close to 20+ crashes a day relating to memory issues
I'm utilising powerquery to import and filter data from 2 rss feeds. Each are at most 100 rows. I then add these to a powerpivot model & have two powerview reports over this.
I've added a powermap to the solution but find the reliability to be very poor. If it does manage to work the colours of the bubbles and bars sometimes don't match the defined colours or they're black (a telltale sign of memory problems in windows). This
usually breaks the whole excel 'process' and I can't save the workbook. I get "workbook not saved" errors or that "there was a problem saving with all the features added. Click continue and save as a different file"
either that or i get a hard crash like I did while writing this post:
Problem signature:
Problem Event Name:   APPCRASH
Application Name:   EXCEL.EXE
Application Version:   15.0.4535.1507
Application Timestamp:   52282875
Fault Module Name:   KERNELBASE.dll
Fault Module Version:   6.1.7601.18229
Fault Module Timestamp:   51fb1116
Exception Code:   e0434f4d
Exception Offset:   0000c41f
OS Version:   6.1.7601.2.1.0.256.1
Locale ID:   3081
Additional information about the problem:
LCID:   1033
skulcid:   1033
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
Memory amount is not a problem according to resource manager; excel process taking ~500mb and 70% free ram. I left memtest86+ running overnight and it found no errors in 8 passes so it looks like my sticks are ok. I have sql server 2008r2 & 2012
along with all the bells (db engine, ssis, ssas) installed and that never gives me hard memory failures even when I drive it hard. Obviously if i try to process a data model that's too big it gives me out of mem errors but that's expected and it doesn't crash
SSDT or the SSAS\Tabular instance. The services are off while I'm doing the excel powerbi work.
laptop specs are :
OS Name   Microsoft Windows 7 Ultimate
Version   6.1.7601 Service Pack 1 Build 7601
Other OS Description    Not Available
OS Manufacturer   Microsoft Corporation
System Manufacturer   Dell Inc.
System Model   XPS L521X
System Type   x64-based PC
Processor   Intel(R) Core(TM) i7-3612QM CPU @ 2.10GHz, 2101 Mhz, 4 Core(s), 8 Logical Processor(s)
BIOS Version/Date   Dell Inc. A15, 1/08/2013
SMBIOS Version   2.7
Windows Directory   C:\Windows
System Directory   C:\Windows\system32
Boot Device   \Device\HarddiskVolume1
Locale   Australia
Hardware Abstraction Layer   Version = "6.1.7601.17514"
Time Zone   Cen. Australia Daylight Time
Installed Physical Memory (RAM)   8.00 GB
Total Physical Memory   7.88 GB
Available Physical Memory   5.67 GB
Total Virtual Memory   15.9 GB
Available Virtual Memory   13.6 GB
Page File Space   8.00 GB
Page File   C:\pagefile.sys
I can upload the workbook too if desired
I dont solely blame powermaps, rendering the powerview reports is pretty hit and miss in all the workbooks i've developed before as well, but clicking the Maps button in excel is certainly the biggest gamble
Jakub @ Adelaide, Australia

Hi Jakub,
I can think of two changes you can make that can help.
1. You don't mention what architecture your office version is. I would suggest you use 64 bit Excel. It has a higher memory threshold and performs much better when using a lot of memory.
2. Install all of the latest CU updates for Office. There has been dozens of bug fixes for PowerPivot and Power View since the last release.
You mention you can share the workbook. Feel free to send to me at
[email protected] and I would be willing to take a look and see if the crashes are known issues or already fixed.
Brad Syputa, Microsoft Reporting Services This posting is provided "AS IS" with no warranties.

Give a java program more resources...in JVM

Is there anyway to give a java program more resources? For example, is there a method System.getXXXX() which gives this program higher priority and resources in the JVM?
I ask because i have a bean running on ATG Dynamo 5.1 but it runs very slowly and i want it to have more use of resources then other beans.

Try running the application in its own server. Then you give give it the resources it needs.

No More Resource problem

Hi:
I have a J2EE application using Connection Pool and JDBC.
I am using Weblogic 6.1 and JDK 1.3.1.
I am running into a 'No More Resource' problem. I did some debugging and think the cause is due to all my 80 database connections are used up so no new connection is available. But all the 80 connections shouldn't be used up because I did the statement.close() and rs.close() in the finally{} statement in all my DAO methods. But it seems like the connections are not released back to the free pool.
I thought I read something that I might need to do a conn.close() too in order for the connections to be returned to the pool and marked as available. Don't the statement.close() do that? Thanks for any help!
Stella

Any resolution on this? We're getting the same problem - using weblogic 6.1 and jdk131. We should never reach the max # of connections specified in the pool but periodically we do. Scraped through all the code and confirmed that for every connection we call ResultSet.close; Statement.close; Connection.Close in the finally block of the try/catch statements. But we still periodically reach the max. It's sporadic so we can't reproduce. Also, after we get the error and we check the weblogic console, we see the # of active connections drop back down below the max capacity (we have shrinking turned on). Any ideas?
thx.
--S.

I need some resources about flash effects

Hello,everybody,I'think I need some resources about flash effects.
Hope someone can provide me some useful site about this.thanks!!

> Its taking a lot of space in my HDD, like i mentioned earlier i was trying to edit a 6 second intro and it took 20GB on my HDD. What the hell is that... Is that normal???
See this:
FAQ: Why is my output file huge, and why doesn't it play back smoothly in a media player?
Start here to learn After Effects:
http://adobe.ly/AE_basics
As the others have said, your computer barely meets the minimum system requirements, so you'll need to be patient and organized when working with video software like After Effects. Rick gave some good advice along these lines. Here is more: http://adobe.ly/eV2zE7

How large of a hard drive can I install on dual G5, and do I need more RAM?

I recently had a situation in which my dual-processor 2.0 G5 was completely refurbished by Apple repair-new logic board, both processors, video card, thermistor, all new. Finally it has been working well after a month of trips back and forth from the Apple store. I have two internal hard drives installed on my G5, both 300GB, one for OS applications, and one for audio. I am running out of space on my main hard drive, and so I recently purchased a Maxtor 1TB hard drive, now manufactured by Seagate, from Fry's. After having my G5 refurbished, I was having an issue with my Samsung 930B monitor going into sleep mode when I boot-up from a CD, but other than that G5 was working fine. I removed the main 300GB hard drive from slot #1 and put it into slot #2, from which I had removed my audio hard drive. I installed the Maxtor drive in slot #1 and reformatted it for Mac using my laptop with ATA/USB cables previously purchased for data transfer. This took about 14 hours as I used the "zeros" option. After that I hooked up the internal cables to both drives and tried to boot up from Leopard in order to install it on the Maxtor drive, but again my monitor went into to sleep mode. We went to the Apple store to try to see if there was an issue with the computer, but everything worked fine with their monitors and CD's, as well as my CD. So there is some kind of issue with my monitor, probably software as it works fine when booting up from the main hard drive, and also was fine when I did its self-test function. While at the Apple store, they installed Leopard from their hard drive which took about 30 minutes.
My problem is this: When I arrived home, I turned on my G5, which had been set to boot from my new Maxtor drive and complete the Leopard setup process, which we had decided to do at home as it would have taken another 20 minutes in the Apple store. The G5 turned on, chimed, I got the Apple screen with the wheel, but then after that my monitor goes into sleep mode. I can hear Leopard's setup intro playing through the speakers, but the screen is in sleep mode. So I reboot holding down the option key so I can boot up from my old (300GB) main hard drive, now in slot #2. This works and the monitor screen does not go to sleep. However, as I am browsing on the web to check for issues concerning this monitor, the G5 freezes, and I get a screen with black bars with writing in them and various technical language across the screen. This happened several times after rebooting. Finally I shut the computer down. I am going to try removing the new hard drive and putting both old ones back in and see if the G5 stops crashing. I think the monitor issue is a separate issue, and I am more concerned with the crashing, as previous to the new hard drive installation the G5 was working fine, monitor fine, other than the issue when booting up from a CD. Do I need more memory? Is the 1TB hard drive too large for my dual-processor 2.0 G5 and overloading it? Would I be better off with a 500GB drive? Would appreciate advice from persons with experience in this area. Thank you.

I have replaced my 5 year old G5 with a Mac Pro, as the G5 just had too many issues, even after replacing all major components (logic board, both processors, video card, etc.) Once I took out the 1 TB hard drive from my old G5, it stopped having the kernel panic issue. Nonetheless I had been through a lengthy repair process previous to this issue, so I didn't care to trust an older machine any longer, especially since being told by an Apple tech that the "new" parts were really just older parts stockpiled from a central location. Could be new, could be refurbished. Apple was kind enough to credit the money we had spent on the G5 repairs towards the purchase of my Mac Pro.

My ipad currently only has 18% charge, i want to download ios6 but it wont let me click on the button, could this be because it needs more charge

my ipad 3 currently has only 18% charge, ive just gone to click on the download button to download new ios 6 but its not highlighted so therfore i cant do it, is this because ipad needs more charge?

Yes, the update takes quite a bit of time (> 1 hr for my iPad2) and will not initiate unless you have enough juice in your battery or are plugged in.

I am getting a warning need more space on my disk. I have checked the Console and there have been 4000 thousand messages in my system log in the last 2 days. I have emptied as many files as possible.

Hi
I am getting a warning on opening my mac saying I need more space as my setup disk is full. I have emptied many files as well as my Trash. I am planning to get an external drive for my photos, but it has been suggested that I check Console and under the system log the following message (of which they say 4000 messages have been logged in 2 days) '06/06/2014 16:08:23.341 com.apple.dynamic_pager: dynamic_pager: Need more space on the disk to enable swapping'. This is a copy of one of the items. It is from the system log. I really do not think I have enough files to warrant this warning, with the exception of photos. My storage shows 143 MB free out of 120.47. Thanks for any help.

First off, no MacBook Air can run 10.3 or earlier.
Secondly, are you sure you only have 143MB of storage free? That's seriously low. With MacBook Airs of 120 GB hard drives, or even 140 GB which is often the case when it says out of 120, you shouldn't allow your free space to go down below 20 GB. MB is 1024 fold less than a GB. So if you really have 143MB free on a MacBook Air, you are long past the minimum space you should be keeping it at, and need to start clearing a lot of space now*:
http://www.macmaps.com/diskfull.html
I'm asking this thread be moved to the MacBook Air forum,a as we can't say for certain what you have when you post in the 10.3 or earlier forum.

PS CC Says I need more than 512 Vram ...

I was using Photoshop last night just to prep a couple of photos for class submission (3 pictures, just reducing their size for web consumption), and I got the message stating that I needed more than 512 Megs of Vram, which was odd to me, as I have 1024 Dedicated available on my video card. I don't run a dual monitor setup any longer, but I do have an ASUS PBs278 that's running at 2560 X 1440. My current graphics card is an ATI Radeon 6800 HD, and my windows 7 system is running on 8 gigs of ram. Up till within the last week, CC has worked just fine, but the other day on boot, it took an unusually long time to get into the software. It eventually did, and I'm wondering if that was an update or some such that's now made the software decree that if it doesn't have the 512 it thinks it should have, the 3d functions won't happen. I don't know if it's a consequence of the larger quantity of pixels being pushed, or if it's the video card getting too old to support CC at such a high resolution now, but some help would be amazing.

Windows 7, 64 bit. I haven't been able to replicate the error, but I have the new drivers as well. I hope this just ends up being a fluke.

How, using Adobe Connect can increase the number of participants in the meeting? I need more than 25 people.

Hi, I use licensed Adobe Connect. Earlier in the meeting could involve up to 100 people. Now only 25. How, using Adobe Connect can increase the number of participants in the meeting? I need more than 25 people.
Thanks for your help.

The purchasing option through adobe.com only allows up to 25 attendees. If you need more than that, you will need to purchase through a reseller. You can find one that is able to sell in your part of the world, here: Adobe Connect Partners. Just reach out to one of the Global Partners.

I need more than the maximum allowed 30 profiles - how do I change this?

I need more than the maximum allowed 30 profiles - how do I change this? Once I reach 30 profiles and I try to add one - it just deletes one automatically thus only allowing a maximum of 30. Please help.

You are talking about 30 Firefox Profiles on the same Windows Logon User Account?
I never saw that as a limit myself. I had 53 Profiles at one time, although I haven't done that since Firefox 3.0. It was causing an extended launch time and I started using "remote" Profiles that weren't controlled by the Profile Manager and weren't in the '''profiles.ini''' file; launched by command line. Like this in the Target line for the desktop shortcut: <br />
''' "C:\Program Files\Firefox_4.0_zip\firefox.exe" -Profile D:\Mozilla\Active-Profiles\4.0_10-15-10-N '''

NEED more than 15 menu item in Context Menu ????

Hi,
I really need to have more than 15 menu item displayed on Context Menu. I desperately need some workaround or ideas to achieve this
My client has invested thousands of dollar in Flex Project, he definitely need more than 15 menu item.If this project failed , client will NEVER think to invest in flex.
Had I been aware of this limitation before I would have thought some solution by now.This comes as a surprise to me at the last moment ,just fews days before Prod Date.
I cant also user java Scrip heck as my Flex application is running inside Dot net Container , I do not access to the luxury of java script
Pls gents help me get rid of this ...PLEASE provide some ideas.
Thanks in advance.
Thanks,
Dharmendra

Thanks Natasha,
I got your point but as for as I know grouping like Quality is not possibel in Flax Context menu. I also cant go for window style menu(file,edit) because I need them to be displyed on DataGrid right clk . I am designing a trade datagrid where in trader can see all trades and he can approve/reject etc by just right clk and selcting proper menu item form Context Menu.
In case of window style (acrobat.com) menu trader will have to reach to menu instead of getting all options on mouse right clk
I will have to think other alternative wich provides same ease as cotext menu.(God knows what is that )
Once again thanks for suggestion.
Regards,
Dharmendra

I have my own icloud account separate from my family's apple ID for itunes. I need more storage for icloud...do I have to pay a separate $20/ month to get more storage or does the $20 include all members of the plan?

I have my own icloud account separate from my family's apple ID for itunes. I need more storage for icloud...do I have to pay a separate $20/ month to get more storage or does the $20 include all members of the plan?

Welcome to Apple Support Communities
If your iCloud account uses your family's Apple ID, you will pay $20/year for all your family members. If your iCloud account uses a different Apple ID than your family's Apple ID, you will pay only for you

Produce one planned order in more resources at same time

Dear Experts,
My client uses PP-PI and he has a requirement for a line that he has 4 resources to do the same operation. We are using a class 019 to plan the resources as alternative resources, but he also wants in some cases to produce the same process order in more than one resource at the same time.
How can I produce the same process order in more resources and do not split the order?
Thanks in antecipate
Thiago Cyrillo

In the case of some special case, you could add some operation to the process order , assign it to the different resource and link the phases of these operations as parallel. You should also enter the operation quantity, this is the way that splitting takes place.
Regards

How to find out if a user has no more resource accounts?

I want to check to see if a user has no more resource accounts tied to it. The only resource account left is Lighthouse and nothing else.
Do you know how I do this?
Thanks

I was able to find disabled users using the below code. Does anyone know how I can find users who have only Lighthouse account and nothing else? I want to add this to the search criteria.
<Action id='0' application='com.waveset.session.WorkflowServices'>
<Argument name='op' value='queryObjectNames'/>
<Argument name='type' value='User'/>
<Argument name='single' value='false'/>
<Argument name='attributes'>
<map>
<s>lhdis</s>
<s>true</s>
</map>
</Argument>
</Action>

Do I need more Resources?

Similar Messages

Maybe you are looking for