Do  I need Tiger in order to upload a song to iWeb

I'm just now experimenting with the new iLife, and drug a song into my iWeb... it plays, has the little control pane device on the layout, but once uploaded it doesn't have the control pane nor music.
Am I gonna hear how I need Tiger to upload and play a song to iWeb?

Did you bring the song in from iTunes? I'm guessing that you did...if so, the song will not play as it is protected from being used in this way.
You may want to seek another source for your songs.
There is also some very good advice and tips from Michael Wong about music on a web page here:
http://www.rowan-cottage.co.uk/Site/Autoplay%20Music.html

Similar Messages

  • Leopard on my MacBook Pro but need Tiger for certain apps...

    I want to load Leopard onto my MacBook Pro but I need Tiger in order to run Pro Tools. I'd like to install Tiger on a 400FW external drive.
    Not sure how to do this and don't know if the 400 is fast enough to run the operating system.
    Any ideas on how to get Tiger onto my ext. drive?
    Many thanks.

    You want the drive to be "bootable" so you need to format it as a GUID partition to boot intel Macs or as an APM partition to boot PPC Macs. You will not be able to "split" the drive. In other words, you cannot create a GUID partition and an APM partition on the same drive. Whichever way you go, either platform will be able to read the drive but only one will be able to boot from it. Your choice.

  • Sales order details uploading using BAPI method in LSMW

    Hi Guys,
    Sales order details uploading using BAPI in LSMW, could you please suggest me, is any standard method or programs is available for this.
    I have some queries about this.
    1) One header line having multiple line items, in this case  we able to upload use the  LSMW method,
        if possible please tell me the steps.
      2) Do we need to do any config changes while uploading data?     
      3) Flat file should be which format.
      4) Steps to process each step wise if possible.
    Please help me
    Thanks,
    Gourisanakar.

    Hi Gouri Sankar,
    would you be able to upload the sales orders with multiple line items using BAPI LSMW?
    if so could you plz suggest?
    Thanks in advance.
    Suresh/

  • Hello MacHeads: I downloaded Handbrake 0.9.1 for Tiger, so I can upload a homemade DVD for editing in imovie.  Problem is I can't even access Handbrake Help book, because I think my firewall settings are preventing me.  I tried turning off all my firewall

    Hello MacHeads: I downloaded Handbrake 0.9.1 for Tiger, so I can upload a homemade DVD for editing in imovie.  Problem is I can't even access Handbrake Help book, because I think my firewall settings are preventing me.  I tried turning off all my firewall settings.?  IDK if I'm even doing that right.  Can anyone help out here?

    You don't need Handbrake for that if it is your own DVD.
    You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle.
    a DVD is in a compresed format called mpeg2, which is standard across all DVDs. This is what is known as a 'final delivery format' and is not suitable for editing. Because is is compressed, a 4.7GB DVD can hold a two hour movie (dual layer DVDs twice that), whereas the DV stream from a video camera, which runs at about 13GB per hour, is not compressed and IS intended for editing.
    In other words you have to 'reverse engineer' the DVD back to an uncompressed format in ordfer to edit it. There is a penalty for doing this in terms of slight quality loss, but it is one you can live with.
    When you have your DVD as an icon on your desktop, double-click it, and it will open to reveal a TS-Folder containing a number of various files, some called VOB. These are the constituent parts of any video DVD.
    When you have downloaded and installed mpegStreamclip, and purchased and installed the Apple mpeg2 plugin, open mpegStreamclip and drag the entire TS Folder into its window. Then using the various menus available to you (just explore them and you will get the hang of it) ask it to convert to DV.
    That DV file, which will be many times larger than the original TS Folder, and which can a while to create (be patient - make coffee or prune the roses!) is what you can now import into iMovie for editing etc.
    When you have finished doing that, you then have to turn the project back into a DVD.
    mpegStreamclip can be downloaded from here:
    http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
    which is free, but you must also have the  Apple mpeg2 plugin :
    http://www.apple.com/quicktime/mpeg2/
    which is a mere $20.
    Another possibility is to use DVDxDV:
    http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
    which costs $25.
    For the benefit of others who may read this thread:
    Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.

  • Creating business process procedure document for order creation& uploading

    Hi,
    How to create business process procedure document for order creation & upload in the same process node.
    which T-Codes I need to use?
    I have completed following things;
    1) Created Implementation Project
    2) Included order creation business process in the project.
    Regds
    PK

    Hi,
    Chk out these links.
    https://websmp202.sap-ag.de/~sapdownload/011000358700002006042008E/HowTo_Impl_Bus_Proc.pdf
    https://websmp207.sap-ag.de/~sapidb/011000358700006935382005E.sim

  • I upgraded my iBook G4 from 384MBytes to 640Mbytes and upgraded from Tiger to Leopard. After a few weeks the HDD failed. New Leopard install reports: "insufficient memory". I need Tiger install disks so I can install

    I upgraded my iBook G4 from 384MBytes to 640Mbytes and upgraded from Tiger to Leopard.
    After a few weeks the HDD failed. I bought a new disk, installed it and trued to install Leopard, but the  install fails reporting "insufficient memory".
    I assume the installation requires more memory than the OS actually needs to be able to run.
    I need Tiger install CD/DVD so I can install Tiger first and then upgrade to Leopard.

    Call Apple Customer Support 1-800-767-2775, provide the Serial Number and specifications of the Mac, and for a reasonable fee, they will supply a replacement set of system discs (if available).
    The discs will be for the original version of the OS that was pre-installed when the Mac was manufactured.
    You need much more RAM than that.
    Leopard system requirements:
    http://support.apple.com/kb/SP517

  • I cannot find a way to update my itunes to 10.6.8. i need this in order to sync my new ipod. i just updated to 10.6.3.help!

    i cannot find a way to update my itunes to 10.6.8. i need this in order to sync my new ipod. i just updated to 10.6.3.help!

    As Limnos says, you first need to update to OS X 10.6.8 before you can install iTunes 11 (please note the version numbers).
    To update OS X close all running applications and make sure you have a current backup. Then pull down the Apple menu and select Software Update. This may show you several items that you can update. Choose OS X 10.6.8. This may take some time. After the process is complete you will be able to run Software Update again and it ought to offer you iTunes 11.

  • Need to create a mass upload program for appraisal document creation for multiple employee

    Hi Expertise,
    I need to create a mass upload program for appraisal document creation for manager and his multiple employee
    at a time using tcode appcreate.
    Please help me out.
    Best regards,
    Priyaranjan

    Hi Priyaranjan,
    I think you can take the abap'ers help in creating the program. But u need to provide them the exact functionality and the required specifications in creating the appraisal document.
    Even tcode also u can get it prepared by Abap'ers.
    Thanks and Regards
    Balaji

  • Need to create a mass upload program for appraisal document creation for multiple employee in abap hr

    Hi Expertise,
    I need to create a mass upload program for appraisal document creation for manager and his multiple employee
    at a time using tcode appcreate.
    Please help me out.
    Best regards,
    Priyaranjan

    Hi,
    I have done appraisal document creation for bulk using txt file.
    this fm used for single for creation in standard tcode (phap_prepare):  'WZ_HRHAP_0DOC_WZ01_START'.
    So create ztcode  usinh this fm for single form then record BDC for this tcode and called this tcode in that bdc for bulk creation .
    While recording for single I have used manual option instead of automatic .

  • Do I need multicam in order to create a movie from multiple cameras?

    Do I need multicam in order to create a movie from multiple cameras? The old fashioned way is just to simply put multiple video clips into multiple video tracks in Final Cut, right? Then I can transition the tracks as I see fit.
    Multicam in Final Cut Pro simply improves upon this by hard synching timecodes right?
    As an amateur, do I really need multicam features in Final Cut Pro in order to make a movie from multiple camera angles?

    Will it make your editing tasks more efficient? Not
    likely. Multicam is an advanced feature of FCP. It
    requires knowing how most of the application's basic
    operations are performed.
    I have to disagree with bog in that multicam is all about efficiency and being able to quickly set-up and edit what could normally take a lot longer. But he is totally correct in that it is a strange set-up with some strange behaviors so if you don't know what you're doing and plan accordingly it could take a lot longer and be a lot more frustrating than the 'old fashioned' way.
    I think it's also important to note that multi-cam is way more than just the "real time" switching of the multiclip in the viewer as it plays back. If you can take time to learn the ins and outs of multi-cam then you can use some features on some jobs and other features at other times. An amateur can do anything that the FCP software because it's there in front of you so play play play!

  • What is a SiM card and do I need one in order to send email from my iPad?

    What is a SIM card and do I need one in order to be able to send email from my iPad?

    For further detail, a SIM card is a very small, thin, printed circuit card which you insert into a tiny drawer in your mobile device. It is your mobile/cellular account, with your personal details on it. So you can move it from one device to another. Before smartphones (like the iPhone), SIM cards also contained your Contact list. Since smartphones contain so much information now, the SIM card just identifies you to the cellular/mobile network. It means you can carry your phone number with you from one phone to another.
    You can get a SIM card for iPad from any Apple Store or phone shop. Note that the newer iPhones and the iPads use what's called a "micro-SIM", which is smaller than a regular SIM card, so it takes up less room inside the phone, and they can stick more hardware in there for better performance. Make sure you ask for a "micro-SIM for iPad".
    As Rudegar says, you don't need a SIM in your iPad if you always have WiFi access. But if you need to send email or messages outside a WiFi network, then you need a SIM, so you can access the cellular/mobile phone tower network.
    You can get prepaid SIM cards which give you so much data for a certain period of time. You need to decide how much data you need, and how often you want to "recharge" it. The salespeople should be able to help you work that out.

  • How can i cancel the order I need cancel the order AD009341699 of adobe acrobat?

    my computer was restart and a need cancel de order I AD009341699 of adobe acrobat.

    Hi,
    Are you a subscriber to Acrobat Plus and like to cancel it?
    thank you.
    Hisami

  • Internal order Budget upload

    Hi
    Can one tell me which layouts i can use for internal order planning and Internal order budgeting uploads in SAP.
    Thanks
    Lily

    Lily,
    Hope you have sorted out the upload of plan data. For uploading the budgets the work around is below:
    Upload the budget data as plan using the planning layout suggested by others. Then in the transaction KO22 select the budget column and use the copy view option under Edit menu and select Planned total.
    Once the Budget details are uploaded you can upload the plan values later.
    Hope this Helps
    Cheers
    Sreenivas

  • Need to extract Order Quantity from T-code COIO

    Hi,
    We are having a Datasource build over the table RESB (generic datasource). And User came with a requirement, that they need to have Order Quantity and Batch from the T-Code COIO to be used in the same BI report.
    I cant find the backend table of T-Code COIO. Is there any possibilities to use those fields in the same datasource.
    Kindly share your ideas.
    Thanks,
    Satish.

    hi,
    Take abap expert help and find the possible relations. if relations are possible between COIO. and RESB then you happily enhance your data source.
    for data source enhancement logic you can get form your abap expert.
    you can add required field to your extract structure of data source thru by appending.
    unhide it at RSA6.
    Thanks

  • I need a purchase order number immediately option in I-proc

    Hello,
    I created one catalog requisition in I-Proc, and checked " I need a purchase order number immediately" option during checkout. This requisition has been created and i even got message that "Purchase order number 45 has been reversed for you" With this being said...
    1. Where can i see this PO number ( I approved above requisition, but i can not see this PO number in PO screen)...?
    2. What does this purchase order number do?
    Thanks
    Deepak

    Hi Depak,
    Please check this doc...
    PO Create Documents
    Workflow File Name: poxwfatc.wft
    This workflow manages the automatic creation of purchasing documents. The PO Create Documents workflow starts in Oracle iProcurement when you submit a
    requisition associated with an existing blanket purchase agreement, contract purchase agreement, or catalog quotation in Oracle Purchasing. Customize the attributes in this workflow to fit your business needs.
    The following table shows the attributes that you must consider:
    1) Is Automatic Creation Allowed?
    Please change to Y
    AUTOCREATE_DOC Indicator (Y for Yes or N for No) of whether this workflow is initiated for all approved requisition lines.
    Default value: N
    2) Is Automatic Approval Allowed?
    AUTO_APPROVE_DOC Indicator of whether the purchase order approval workflow is initiated automatically after this workflow.
    Default value: N
    Please change to Y
    3) Should Workflow Create The Release?
    CONT_WF_FOR_AC_REL_GEN Indicator of whether this workflow creates, releases, or leaves them to the buyer to create using AutoCreate in Oracle Purchasing.
    Default value: N
    Please change to Y
    You can verify the changes through below query..
    select rtrim(w.name) name,
    w.text_default Value,
    rtrim(w.item_type) item_type
    from wf_item_attributes w
    where w.NAME in ('AUTO_APPROVE_DOC', 'CONT_WF_FOR_AC_REL_GEN', 'AUTOCREATE_DOC')
    Hope this will help.
    Regards,
    S.P DASH
    Another quick question to you, you mentioned UNSPENT code in your queries.. I think it should be UNSPSC code...correct me if I am wrong here..

Maybe you are looking for