Do i need to activate windwos server datacenter 2012 virtual machines seperatley
Hello All,
i have purchased windows server 2012 data center license and i have installed hyper v and created 4vms. do i need to activate those vms also? if yes, how will i get keys.
Thanks
You can activate you VMs on 2012 R2 via AVMA (Automatic Virtual Machine Activation)
Just use this keys:
slmgr /ipk ‹AVMA-key›
Windows Server 2012 R2 Datacenter
Y4TGP-NPTV9-HTC2H-7MGQ3-DV4TW
Windows Server 2012 R2 Standard
DBGBW-NPF86-BJVTX-K3WKJ-MTB6V
Windows Server 2012 R2 Essentials
K2XGM-NMBT3-2R6Q8-WF2FK-P36R2
Similar Messages
-
New PC need to activate Acrobat IX purchased on old machine
I purchased Acrobat Pro XI and need to activate on a new computer. The old PC is out of service. Can anyone help with activation?
HI frederick t,
Please Contact Customer Care. A Customer Care agent can help you deactivate the copy of Acrobat on your older computer and help get you set up on the new one as well.
Best,
Sara -
Windows Server 2012 Virtual Machine Failure
I am running Windows Server 2012 R2 Host machine. In Hyper-V, I created a WS 2012 VM. The VM starts out OK, but after a few hours of work (configure and install SharePoint 2013), starts throwing errors (Machine had to re-boot). Eventually, the VM becomes
unstable and unable to re-boot. Last attempt threw this error in Hyper-V Event Manager:
'BISP2013' has encountered a fatal error. The guest operating system reported that it failed with the following error codes: ErrorCode0: 0x7A, ErrorCode1: 0x400207A0, ErrorCode2: 0xC0000185, ErrorCode3: 0x57BA6860, ErrorCode4: 0x40F4234. If the
problem persists, contact Product Support for the guest operating system. (Virtual machine ID 7E140D89-25B9-4D3B-835B-7BB882C629BB)
This has happened on multiple attempts occasionally ending with Error 0Xc000021a. Creating WS 2012 R2 VMs does not present this problem.
Any suggestions greatly appreciated.
MarioHi Mario,
This should not happen here .
My suggestion is to download a new server2012 ISO and reinstall .
Also please refer to following "best practice configurations for sharepoint 2013":
http://technet.microsoft.com/en-us/library/ff621103(v=office.15)
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Need to access the Power shell within Virtual Machine Manager.
Hi all, I have a VM that shuts down everyday between 9-10PM. I would like to get a script to start it up at 11PM. However, the issue I have that if i run the powershell command "start-vm -servername" from the Powershell within the Virtual
machine manager it works without an issue. However I can not get my script to use that powershell. If I use the normal powershell, that command does not work. Hopefully that makes sense.
I'm running Windows server 2008 R2 standard with VMM 2008 R2.
The VM is being decommissioned in Q1 2015, so this would be the most cost effective way to restore functionality.
Any help would be greatly appreciated.
GurmukhHi Noah, thanks for the response, here is the output from that command. As you may have guessed I'm a powershell newbie
PS C:\Users\gurmukh-admin> get-module -list
ModuleType Name
ExportedCommands
Manifest ADRMS
Manifest AppLocker
Manifest BestPractices
Manifest BitsTransfer
Manifest FailoverClusters
Manifest PSDiagnostics
Manifest ServerManager
Manifest TroubleshootingPack {}
Manifest WebAdministration
I'll have to google on how to import a module.
Gurmukh -
Error when creating a database on SQL Server 2012(Virtual Machine)
Hi,
I create a virtual machine on VMWare Workstation 10, then install Windows 7(32bit), then install SQL Server 2012 Enterprise version.
Then I write a Visual C++2008 program and using ADO to connect to the local SQL Server, with the connection string below:
“Provider=sqloledb;Data Source=(local);Integrated Security=SSPI;”
The connect succeed, then I try to create a new SQL Server database by calling:
m_pConnection->Execute(_T(“create database MyDatabase on primary (name = ‘MyDatabase’, filename = ‘E:\\MyDatabase.mdf’)”), NULL, 0);
where E: is a USB drive plugged in.
When running the above statement, I can even see the MyDatabase.mdf file is being created, but finally get an error and error number is 80040e31 when checking the error from m_pConnection, after analyzing the com exception, we find it reports the error as
“IDispath error #3121”. Both errors seem to indicate a “Timeout error”.
Then I try to create the database on the local drive in the virtual machine, as follows:
m_pConnection->Execute(_T(“create database MyDatabase on primary (name = ‘MyDatabase’, filename = ‘C:\\MyDatabase.mdf’)”), NULL, 0);
Then I get error number: 80040e14 from m_pConnection, and com error is “IDispath error #3092”
What is the problem?
ThanksHello chcw,
SQL Server 2012 Enterprise doesn't support to install on Windows 7 Opeating System. For detail information, please refer to the article below:
The article shows the operating system requirements for the principal editions of SQL Server 2012:
http://msdn.microsoft.com/en-us/library/ms143506.aspx#top_principal
Here is an article for your reference, please see:
How To Create a SQL Server Database Programmatically by Using ADO.NET and Visual C# .NET:
https://support.microsoft.com/kb/307283/en-us
If you have any feedback on our support, please click
here.
Regards,
Elvis Long
TechNet Community Support -
Windows server 2008 r2 virtual machine uses much less memory then it has assigned
Guys,
I had a virtual machine with windows 2008 r2 operating system, running sharepoint, on a server where it had 6gb RAM memory assigned.
Now I bought a new server, which has 32 gb of ram. I moved my virtual machine there, and assigned 24gb of RAM.
But after I started VM, in Windows Task Manager I see that system uses only about 6.5 GB of RAM assigned. That is not even close to 24gb, which it has available.
Is there any power shell script or anything else available to increase virtual machine memory usage?
Thank you.Hi,
I found a KB similar described with your issue- the Hyper-V host cannot allocate more memory to the virtual machine because there is not enough free disk space to extend the
memory contents file, more detail symptoms please refer the following KB:
Dynamic Memory allocation in a Virtual Machine does not change although there is available memory on the host
http://support.microsoft.com/kb/2504962/en-us
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Hi,
I am running BPA on My Exchange 2010 VM (Server 2008 R2 VM on Hyper-V) and get the following errors:
The 'Services' string type value located in 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v14\Setup\Services' registry key is missing or inaccessible. The Microsoft Exchange Information Store service won't start. As a result, all services that depend
on this service won't be able to start
Exchange server [Exchange Server FQDN] is a virtual machine but the additional tools are not installed. This configuration is not supported. Install Virtual Machine Additions for this guest.
Problem is that, for the first, that Key exists and the service is actually running fine. And for the second my VM tools are already installed.
Hopefully someone out there has had the same issue and can assist.
PeteHi Pete,
For the first error message, please try the following steps:
Make sure the Information Store service is in Starting status,
Automatic startup type and works well, as a test we can try to
restart the Infroamtion Store service and verify the service works well.
Start
Registry Editor, find the registry key “Services” under “HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v14\Setup”, its value is “C:\Program
files\Microsoft\Exchange Server\v14”(default install location), please check your registry, make sure the key “Services” exist and value is the Exchange Server install location and the
location is accessible;
Start
Registry Editor, and locate the following registry key:
HKEY_LOCAL_MACHINE\Software\Microsoft\Exchange\Setup
Use the
Permission option under the Security tab to check the permission setting on this key. Make sure
System is in the list with Full Control permissions if the service account is Local System. If you are not using Local System as the service account, check the existence of the corresponding account in the list and ensure that
it has Full Control permissions. Please refer to this article:
Title: Exchange Store Does Not Start: Errors 7024, 1026, 9542, and 5000
Link:
http://support.microsoft.com/kb/285116
Start
ADSI Edit, and then browse to the following location:
Domain.com/Configuration/Services/Microsoft Exchange/Org/Administrative Groups/AdminGroup/Servers/Server Name
Right-click the
server name, and then click Properties.
Click the
Security tab, make sure this own server’s server object have
full control permission on its own server.
If not or the object is missing, please modify the permission or click
Add, locate the computer account for the Exchange Server computer, add it to the Permissions list with full control.
Click OK, and then close ADSI Edit.
Use
Active Directory Users and Computers to add the current affected
Exchange Server computer account to the Exchange Servers(previous version should be “Exchange Domain Servers”) group in the
Microsoft Exchange Security Groups( or Users) OU. Refer to this article:
http://support.microsoft.com/kb/297295.
Restart the Exchange Server computer, then rerun the ExBPA.
For the second error message, Microsoft don’t recommend to install Exchange Server on virtual machine without additional tools, so the error message occurs. We can just ignore
this message, it will not affect the Exchange servers.
Regards, Eric Zou -
RMI server crashing the Virtual Machine
I am writing an enterprise RMI service at work and it has been crashing at seemingly random points and in-frequently. It is not actually crashing as such, because I have added a shutdown hook and that is getting called before it exits. I know for sure that it is not a system.exit() call because I have prevented all system.exit() calls in the security manager. I also have put in very tight memory management and an extended heap so I don't think its a memory issue either. Frequent calls to freeMemory() show that there is no memory leakage and that everything seems to be being cleaned up correctly.
I am using the IBM 1.3 virtual machine on a linux box for the server and thus the calls to the garbage collector are working nicely and when requested.
The crashing is happening at seemingly random points and I have covered all my public methods with try....catch blocks that catch Throwable, and it doesn't seem to be an exception. Code that 19 out of 20 times will run fine, crashes on the 20th run etc.
What I am wondering is - has anyone had similar problems and do you know how to fix it?
My other thought is that perhaps it is a problem with the IBM virtual machine, and I am thus going to try running things through the Sun 1.3 virtual machine to see if I get any different results.
Any insights or help from people developing similar services would be greatly appreciated (this is the first RMI service I have implemented).YES!!! I finally solved it..........
I put the monitoring code into the startup script - incidentally, on linux the shell variable is $? as opposed to $status.
Then I let it run and this morning it exited again and the error code was 130 - or Control-C.... This made no sense to me as the service was running on a linux box which I was monitoring through a telnet window on my Windows PC. And I know for sure that I wasn't pressing Control-C.
After talking to someone else at work I found out that they had heaps of problems running a resin server in a similar way (through a telnet window), and in the end it came down to the telnet window was sending things it shouldn't to the resin server and causing all sorts of problems. As soon as they ran it in the background, the problems disappeared.
So I ran it in the background and the problem has disappeared. Instead, to monitor the service I just did a tail -f on the log file and every half hour or so the tail program running through the telnet window was just dying mysteriously...... ha ha ha ha
Thanks a lot for your help EJP, I wouldn't have been able to sort it out without your suggestions. And I have learnt a lot more about RMI in tracking this bug down. Only problem is that the clients were here for a demo last week and had it exit once while they were running the client app......arg!!! -
Windows Server Datacenter 2012
Dear Team,
We are using VM esxi 5.5 and we have bought volume License from microsoft for Datacentre 2012 R2. My concern is "how many 2012 data centre system I can create on VM with this License".
Can I install 2012 enterprise /Standard or other version with this volume License.Please refer to:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/f2c60e7d-1f29-4251-929e-2c2c58c19eaa/windows-2012-license-downgrade-to-windows-server-2008-r2-licensing-on-vmware?forum=winserver8gen
http://www.microsoft.com/licensing/about-licensing/briefs/win2008-virtual.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!) -
I am wondering if it is possible to install and run Windows Server 2008 on a Mac Mini Server as a VM as my main application uses Windows VisualBasic and Fox Pro and requires a Static IP to connect to it, My other offices connects to Windows Server via RDP.
Basically I am researching a Server for the same purpose and since Mac Mini and OsX both are robust in nature it can fit the bill if every thing work fine.
ThanksFrom the Parallels website:
32-bit Operating Systems
Windows 8 with: Windows 8, 8.1 (when available)
Windows 7 SP1
Windows Vista SP0, SP1, SP2
Windows Server 2008 R2, SP2, SP1, SP0
64-bit Operating Systems
Windows 8
Windows 7 SP1
Windows Vista SP0, SP1, SP2
Windows Server 2012
Windows Server 2008 R2, SP2, SP1, SP0
I do suggest that you upgrade RAM to at least 8gig
if you haven't already.
FWIW, I currently use Win8/64 bit with Parallels on a 2011 Mini Server
using the windows environment for engineering applications and have
had no issues. I am running Mountain Lion but do not have the
Server app installed. -
[Solved]Pacman fails to connect to server in Arch Virtual Machine
Hi
I've just installed arch 2008.06 in VMWare Workstation 6.04 on Vista Business x64. The setup all went fine and i am now logged into my system, but Pacman refuses to connect to anything. i have tried Bridged networking and NAT to no avail. whenever i run 'pacman -Syy' i get the message
"error: failed retrieving file 'core.db.tar.gz' from ftp.archlinux.org : File unavailable (e.g.,file not found, no access)"
followed by the same message for each mirror in my mirrorlist, and then again for 'extra.db.tar.gz' and 'community.db.tar.gz', and then 'failed to synchronise any databases' at the end.
I have tried pinging google, as well as several of the arch mirrors and they all work fine. wget also seems to work fine, it's just pacman that's not working.
Anyone have any suggestions?
Last edited by henrypootel (2008-09-12 01:53:56)That's what i thought too so i switched off the Vista firewall and still no luck. I am behind a hardware firewall here at work, but it shouldn't be blocking FTP traffic. i use FTP in windows all the time.
Just tried downloading a file using wget and it worked fine.
Last edited by henrypootel (2008-09-11 03:45:29) -
I can't see sql server express 2012 from ssms 2008 R2 -- what do I need to download?
I'm running sql server 2008 R2 Developer on a win7 (pro) workstation. I would like to keep this installation because it has SSRS and Analysis Server. But I was not able to attach a sql 2012 DB so I downloaded Sql Server Express 2012 (per the
picture below - 1st option selected) and installed it. Sql Server Express 2012 appears to be running -- per my services list, but I cannot see the instance in ssms 2008 R2. Do I need to uninstall Sql Server Express 2012 and then download another
option (from the picture below)? How should I proceed so that I can have a working/workable instance of Sql Server Express 2012 that I can see in ssms (whatever required version) and also keep sql server 2008 R2? which download should I select (from
the picture below?
Rich PShould I uninstall Sql server 2012 first?
Rich P
No you do not need to uninstall any thing
>> Sql Server Express 2012 appears to be running -- per my services list, but I cannot see the instance in ssms 2008 R2.
You need to just download SQL Server 2012 express management studio and use that to connect to SQL Server 2012. And use SSMS 2008 r2 to connect to SQL Server 2008 r2.
This File :ENU\x64\SQLManagementStudio_x64_ENU.exe
Although I guess SSMS 2012 express with SP2 would work just fine and you would connect to 2008 R2 database using that.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP -
Physical Server Clustered Migration to Virtual Machine
Dear All,
We got an request from SQL server running on physical server migrate to virtual machine.
Please advice me the procedure and checklist for this migration request.
Thanks.Hi mailatdinesh,
If you want to run SQL Server in a virtual machine (VM), here are some of the essential tips for virtualizing SQL Server.
1. To support bare metal virtualization platforms, you need to make sure that the host uses a 64-bit x64 processor; In addition, for a resource-intensive workload like SQL Server, it's vital that the host processor supports Second Level Address Translation.
2. SQL Server can automatically take advantage of multiple CPUs if they're present. If you're migrating from a physical SQL Server implementation to a virtualized SQL Server implementation, you can use the number of CPUs in the physical implementation as
a guide for the number of virtual CPUs that you'll configure in the SQL Server VM.
3. In order for SQL Server to take advantage of dynamic memory, I recommend you to use the Enterprise edition of SQL Server 2008 or later or using the Datacenter edition of SQL Server 2008 R2 or SQL Server 2008.
For more information , see:
http://sqlmag.com/sql-server/sql-server-virtualization-tips
When you migrate one instance from one server to another, as other post, you can use backup and restore, the sp_detach_db and sp_attach_db stored procedures, or
the Import and Export Data Wizard to copy objects and data between SQL Server databases, you also need to transfer logins and passwords between instances of SQL Server, move jobs, alerts and operators. For more information, you can refer to the following
article,
http://support.microsoft.com/kb/314546
There is also similar issue about moving SQL Server to VM, you can refer to the following post.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/43085f0f-4526-4994-be95-530aecb5dd7c/moving-sql-server-to-vm
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support -
ODBC Problems with SQL Server 2012 on Virtual Machine
I am having problem with my application after my IT department upgraded to SQL Server 2012 with error "ConngetDataToModify.vi:1"<ERR>Object 0x2222222 is not valid. I have 4 servers running the same executable without problem before the upgraded. However, after the upgrade 2 of these Server are having the problem with the ODBC connection. Here are my setup, the application was created using LabView8.5, we have 2 physical server box running Window Server 2003, 2 Virtual Machine on Windows Server 2008, and a Virtual Machine with SQL 2012 Server. The 2 physical server running the executable without a problem after the upgrade, but the 2 Virtual Server were unable to connects to the ODBC connection. Anyone have any idea why this is happening , it is the problem with compatibility between my application with Server 2008 and SQL 2012 Server, or is there a problem with both beings Virtual Servers? As I said, the 2 physical Server seem to be running without any problem with the upgrade.
My guess is that the problem is not specifically with LV. This should be relatively easy to check if you create a UDL file and double click it. This opens a Microsoft wizard which allows you to configure and test DB connections (the UDL file itself is basically just a text file which holds a connection string). If it doesn't work there, it won't work in LV.
As for what the actual problem is, a common culprit is the firewall, which is easy enough to check by disabling it. Another option is the surface area configuration of SQL Server, which will not allow network connections unless you tell it to.
It should probably also be noted that LV 8.5 is not officially supported on Windows Server. I'm assuming that's not the issue, but be aware of it.
Try to take over the world! -
Cannot setup VPN (WMI failure?) - Server Essentials 2012 R2
Hi,
Last week i setup a new Server Essentials 2012 R2 (fresh install). Everything apart from the Anywhere Access has sucessfully been setup and the server is in a production Environment.
When i try to configure Anywhere Access and setup VPN + RemoteDesktop , the wizard fails. VPN cannot be setup , retry.
Two Issues:
The VPN setup/configuration fails (Lets start with this one, could be related to second issue).
Remote Desktop setup is completed. However the "Remote Desktop Gateway" service cannot be started because the dependant service RPC/HTTP Load Balancing cannot start.
Troubleshooting steps taken on the VPN setup Issue:
Restarting the server (multiple times)
Rerunning the wizard (multiple times)
Checking if the correct roles has been installed by Server Essentials
Checking log files dashboard.log (The error found)
Run sfc /scannow (errors found and corrected)
Run DISM (OK)
Tried to setup VPN manually using the RRAS GUI (Error: Installation of the Routing and Remote Access service failed because Class not registered 80040154)
Further I've concluded that the 1st (VPN) issue is probably casued by malfunctioning WMI
In the dashboard.log , when running the VPN setup an error can be found on one of the setup steps:
[6684] 140723.170909.2619: RemoteAccess: PS > RemoteAccess\Install-RemoteAccess -VpnType Vpn;
[3320] 140723.170910.1772: DomainManagerObjectModel: Calling KeepAlive for instanceID=1
[3320] 140723.170910.1772: DomainManagerObjectModel: KeepAlive succeeded for instanceID=1
[6684] 140723.170918.1943: RemoteAccess: PS Exception (catch and rethrow): System.Management.Automation.MethodInvocationException: Exception calling "EndProcessing" with "0" argument(s): "Object reference not set to an instance
of an object." ---> System.NullReferenceException: Object reference not set to an instance of an object.
To troubleshoot this further, i've run the PS command "Install-RemoteAccess -VpnType Vpn" manually. This gives me the following error which Points to a WMI issue
PS C:\Windows\system32> RemoteAccess\Install-RemoteAccess -VpnType Vpn
RemoteAccess\Install-RemoteAccess : Provider load failure
At line:1 char:1
+ RemoteAccess\Install-RemoteAccess -VpnType Vpn
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (PS_RemoteAccess:root/Microsoft/...PS_RemoteAccess) [Install-RemoteAccess]
, CimException
+ FullyQualifiedErrorId : HRESULT 0x80041013,Install-RemoteAccess
Ran WMIdiag - Found errors. The most interesting error is found below
53059 22:43:35 (2) !! WARNING: WMI provider DCOM registrations missing for the following provider(s): ..................................... 3 WARNING(S)!
53060 22:43:35 (0) ** - ROOT/CIMV2/TERMINALSERVICES, AAGProvider ({75D15B16-228C-499F-A0FC-E4899AC870CE}) (i.e. WMI Class 'Win32_TSGatewayResourceGroup')
53061 22:43:35 (0) ** Provider DLL: ''
53062 22:43:35 (0) ** - ROOT/WEBADMINISTRATION, WebAdministrationProvider ({84951D16-922E-4692-B4E9-90DD80426ECF}) (i.e. WMI Class 'SiteContainsConfigurationSection')
53063 22:43:35 (0) ** Provider DLL: ''
53064 22:43:35 (0) ** - ROOT/MICROSOFT/WINDOWS/REMOTEACCESS/SERVER, RAServerPSProvider ({BEF7FC3B-203F-4AD6-B38E-A1F519202644})
53065 22:43:35 (0) ** Provider DLL: ''
The WMIDiag provider CSV shows that the RASERVERPSPROVIDER.DLL has no DCOM (WMI Provider Binary) registration. (see example below)
WMI Namespace
WMI Class name
WMI Provider Name
WMI Provider Model
WMI provider binary
WMI provider registration MOF file(s)
ROOT/MICROSOFT/WINDOWS/REMOTEACCESS/SERVER
PS_RemoteAccessLocal
RAServerPSProvider
No DCOM registry registration
No DCOM registry registration
C:\WINDOWS\SYSTEM32\WBEM\RASERVERPSPROVIDER.MOF
So I've tried to reregister the DLLs with regsvr32 RASERVERPSPROVIDER.DLL. I've also tried to recompile the MOFs (RASERVERPSPROVIDER.MOF). I found the missing DLL and MOF using WMIDiag on Another Server Essentials 2012 R2 machine. But no sucess - the WMI
Provider binaries and model are still missing..
Example from another (healty) 2012 R2 Essentials Server
WMI Namespace
WMI Class name
WMI Provider Name
WMI Provider Model
WMI provider binary
WMI provider registration MOF file(s)
ROOT/MICROSOFT/WINDOWS/REMOTEACCESS/SERVER
PS_RemoteAccessLocal
RAServerPSProvider
In-proc
C:\WINDOWS\SYSTEM32\WBEM\RASERVERPSPROVIDER.DLL
C:\WINDOWS\SYSTEM32\WBEM\RASERVERPSPROVIDER.MOF
Is there any other way to add the WMI provider binary manually? Or do you think I'm on the wrong track?
Thank you in advance.
Regards
Josef
Support Engineer
(MCP) Microsoft Certified Professional
(MCTS) Exchange Server 2010, Configuring
(CCNA) Cisco Certified Network AssociateHi,
Here is a good blog to troubleshoot WMI issues.
WMI: Rebuilding the WMI Repository
http://blogs.technet.com/b/askperf/archive/2009/04/13/wmi-rebuilding-the-wmi-repository.aspx
First, I want to confirm if the good system is at the same hotfix/SP.
Re-register all of the dlls and recompile the .mofs in the wbem folder and re-registering WMI Service and Provider. Then verify the consistence of the repository.
If the issue persists, we can choose to rebuild the repository.
Hope this helps.
Maybe you are looking for
-
Are you disappointed and frustrated with the Note 3? I feel the pain!
I feel everyone's pain with the Note 3 Issues! I have been in the tech field for 20 years and Verizon treats me as if it is the first time they are hearing about the issues! Rather that work on a fix, I've been told that I can leave my contract with
-
External hard disk for use with quicksilver 2002 and intel imac 24"
i am wanting to purchase an external hard disk to be used with both a g4 and an intel imac 24". i am considering a seagate barracuda 500gb or 750gb and purchasing an external case separately. interfaces - usb2, firewire 400 and 800. Do I need a case
-
Chek these... i have a doubt which is bold below..... Alert Rules Message-based alerting is used to notify about errors that occur during message processing. It is based on the alert framework, among other things, so you can leverage the functio
-
I am unable to use my computer with this new Firefox 4. Can I please return to Firefox 3?
-
Hello, I need your help very very much. My data base is Oracle 9i. I'd like to save file as Blob in the table of the data base. What I have to do?