Do I need to archive this file?
Hello
I have an iMovie file that is approximately 32 GB. I have made a disk image of it in iDVD, and do not think that I will be making any further changes to the file, just burning it from the disk image.
Questions are:
*Do I need to keep the iMovie file somewhere, or can I just trash it at this point? I cannot archive it to put on my (small 20GB) external HD until I am done with the project because it gives me an error that the disk is full before it finishes archiving it.
*What does this error mean? I should have plenty of space on my hard drive (about 34GB left)for the compressed file.
Thanks for your help!
A disk image is a stand-alone and is not tied to the iMovie or iDVD project. So, if you are sure that you won't be editing your movie or iDVD project any more, you can just save the disk image and trash everything else. But . . .your movie is running over two hours. If you try to burn it to a standard 2 hour DVD disk, you won't have enough room to do that, unless you use a duel layered disk. Some burners can't burn duel layered disks, so you need to check to make sure that yours can. Before you trash anything, you might consider splitting your movie into two movies of approximately one hour each and burning two separate disk images. That way you would be able to burn onto the standard 2 hour disk.
I don't quite understand your saving question.
Similar Messages
-
Restore with brtools - need more archive redolog files
Good day
I will make online backup my oracle database with brtools
(Oracle 10g, BRBACKUP 7.00 (39))
brbackup -c -d util_file_online -t online -m all -u /
bdztoexw anf 2009-01-23 15.27.40 ; 2009-01-23 16.47.21 ; 1 ............... 57 56 0 17671 226215105 17676 226268039 ALL
online util_file_online -
7.00 (39)
BR0280I BRBACKUP time stamp: 2009-01-23 16.43.38
BR0232I 57 of 57 files saved by backup utility
BR0230I Backup utility called successfully
BR0280I BRBACKUP time stamp: 2009-01-23 16.43.40
BR0340I Switching to next online redo log file for database instance VPP ...
BR0321I Switch to next online redo log file for database instance VPP successful
BR0117I ARCHIVE LOG LIST after backup for database instance VPP
Parameter Value
Database log mode Archive Mode
Automatic archival Enabled
Archive destination /oracle/VPP/oraarch/VPParch
Archive format %t_%s_%r.dbf
Oldest online log sequence 17673
Next log sequence to archive 17676
Current log sequence 17676 SCN: 226268039
Database block size 8192 Thread: 1
Current system change number 226268041 ResetId: 603135330
After brbackup I'll do "brarchive" in the same script:
brarchive -c -d util_file -sd -u / > $br_out_file
#ARCHIVE.. 17670 /oracle/VPP/oraarch/VPParch1_17670_603135330.dbf ; 2009-01-23 15.10.36 ; 43450368 226202112 1
#SAVED.... adztolzu svd *VXF1232718526 2009-01-23 16.51.11 ........... ............
#COPIED... ........ ... ................. .......... ........ ........... ............
#DELETED.. adztolzu svd 2009-01-23 16.51.11
#ARCHIVE.. 17671 /oracle/VPP/oraarch/VPParch1_17671_603135330.dbf ; 2009-01-23 15.36.12 ; 43430912 226215105 1
#SAVED.... adztolzu svd *VXF1232718526 2009-01-23 16.51.11 ........... ............
#COPIED... ........ ... ................. .......... ........ ........... ............
#DELETED.. adztolzu svd 2009-01-23 16.51.11
#ARCHIVE.. 17672 /oracle/VPP/oraarch/VPParch1_17672_603135330.dbf ; 2009-01-23 15.40.27 ; 43515904 226227928 1
#SAVED.... adztolzu svd *VXF1232718526 2009-01-23 16.51.11 ........... ............
#COPIED... ........ ... ................. .......... ........ ........... ............
#DELETED.. adztolzu svd 2009-01-23 16.51.11
#ARCHIVE.. 17673 /oracle/VPP/oraarch/VPParch1_17673_603135330.dbf ; 2009-01-23 15.41.06 ; 43729408 226238784 1
#SAVED.... adztolzu svd *VXF1232718526 2009-01-23 16.51.11 ........... ............
#COPIED... ........ ... ................. .......... ........ ........... ............
#DELETED.. adztolzu svd 2009-01-23 16.51.11
#ARCHIVE.. 17674 /oracle/VPP/oraarch/VPParch1_17674_603135330.dbf ; 2009-01-23 16.06.06 ; 43450368 226250315 1
#SAVED.... adztolzu svd *VXF1232718526 2009-01-23 16.51.11 ........... ............
#COPIED... ........ ... ................. .......... ........ ........... ............
#DELETED.. adztolzu svd 2009-01-23 16.51.11
#ARCHIVE.. 17675 /oracle/VPP/oraarch/VPParch1_17675_603135330.dbf ; 2009-01-23 16.43.40 ; 13243904 226263012 1
#SAVED.... adztolzu svd *VXF1232718526 2009-01-23 16.51.11 ........... ............
#COPIED... ........ ... ................. .......... ........ ........... ............
#DELETED.. adztolzu svd 2009-01-23 16.51.11
VPP util_file adztolzu svd 2009-01-23 16.47.22 ; 2009-01-23 16.54.47 ; 1 ........... 17670 17675 0 0 ------- 7.00 (39) @0603135330
BR0280I BRARCHIVE time stamp: 2009-01-23 16.51.11
BR0232I 6 of 6 files saved by backup utility
BR0230I Backup utility called successfully
BR0016I 6 offline redo log files processed, total size 220.128 MB
Then I take tape with this data and try restore only from this tape
all datafiles and relevant archive redologs files (17670-17675) restored without errors
but in the end ERROR occurred
ERROR at line 1:
ORA-01195: online backup of file 1 needs more recovery to be consistent
ORA-01110: data file 1: '/oracle/VPP/sapdata1/system_1/system.data1'
ORA-00279: change 226268039 generated at 01/23/2009 16:43:40 needed for thread
1
ORA-00289: suggestion : /oracle/VPP/oraarch/VPParch1_17676_603135330.dbf
ORA-00280: change 226268039 for thread 1 is in sequence #17676
My online backup ended, before switch to redolog 17676
Why I need this file? I think files (17670-17675) should be enough?
Besides, the change 226268039 generated exactly at moment Switching to next online redo.
Can I try open database regardless of this error?
Thank you for your prompt response
Andrey Timofeev
Edited by: Andrey Timofeev on Jul 21, 2009 3:52 PM<P>Good day, sorry for TAG. Once more time. <BR>
I will make online backup my oracle database with brtools<BR>
(Oracle 10g, BRBACKUP 7.00 (39))</P>
<P>brbackup -c -d util_file_online -t online -m all -u /</P>
<HR>
<P>bdztoexw anf 2009-01-23 15.27.40 2009-01-23 16.47.21 1 ............... 57 56 0 17671 226215105 17676 226268039 ALL<BR>
online util_file_online </P>
<HR>
<P> BR0280I BRBACKUP time stamp: 2009-01-23 16.43.38</P>
<HR>
<BR>
<P>BR0232I 57 of 57 files saved by backup utility<BR>
BR0230I Backup utility called successfully</P>
<P>BR0280I BRBACKUP time stamp: 2009-01-23 16.43.40<BR>
BR0340I Switching to next online redo log file for database instance VPP ...<BR>
BR0321I Switch to next online redo log file for database instance VPP successful</P>
<P>BR0117I ARCHIVE LOG LIST after backup for database instance VPP</P>
<P>Parameter Value</P>
<P>Database log mode Archive Mode<BR>
Automatic archival Enabled<BR>
Archive destination /oracle/VPP/oraarch/VPParch<BR>
Archive format %t_%s_%r.dbf<BR>
Oldest online log sequence 17673<BR>
Next log sequence to archive 17676<BR>
Current log sequence 17676 SCN: 226268039<BR>
Database block size 8192 Thread: 1<BR>
Current system change number 226268041 ResetId: 603135330</P>
<HR>
<BR>
<P>After brbackup I'll do "brarchive" in the same script:</P>
<P>brarchive -c -d util_file -sd -u / > $br_out_file</P>
<HR>
<P>#ARCHIVE.. 17670 /oracle/VPP/oraarch/VPParch1_17670_603135330.dbf 2009-01-23 15.10.36 43450368 226202112 1<BR>
#SAVED.... adztolzu svd *VXF1232718526 2009-01-23 16.51.11 ........... ............<BR>
#COPIED... ........ ... ................. .......... ........ ........... ............<BR>
#DELETED.. adztolzu svd 2009-01-23 16.51.11<BR>
#<BR>
#ARCHIVE.. 17671 /oracle/VPP/oraarch/VPParch1_17671_603135330.dbf 2009-01-23 15.36.12 43430912 226215105 1<BR>
#SAVED.... adztolzu svd *VXF1232718526 2009-01-23 16.51.11 ........... ............<BR>
#COPIED... ........ ... ................. .......... ........ ........... ............<BR>
#DELETED.. adztolzu svd 2009-01-23 16.51.11<BR>
#<BR>
#ARCHIVE.. 17672 /oracle/VPP/oraarch/VPParch1_17672_603135330.dbf 2009-01-23 15.40.27 43515904 226227928 1<BR>
#SAVED.... adztolzu svd *VXF1232718526 2009-01-23 16.51.11 ........... ............<BR>
#COPIED... ........ ... ................. .......... ........ ........... ............<BR>
#DELETED.. adztolzu svd 2009-01-23 16.51.11<BR>
#<BR>
#ARCHIVE.. 17673 /oracle/VPP/oraarch/VPParch1_17673_603135330.dbf 2009-01-23 15.41.06 43729408 226238784 1<BR>
#SAVED.... adztolzu svd *VXF1232718526 2009-01-23 16.51.11 ........... ............<BR>
#COPIED... ........ ... ................. .......... ........ ........... ............<BR>
#DELETED.. adztolzu svd 2009-01-23 16.51.11<BR>
#<BR>
#ARCHIVE.. 17674 /oracle/VPP/oraarch/VPParch1_17674_603135330.dbf 2009-01-23 16.06.06 43450368 226250315 1<BR>
#SAVED.... adztolzu svd *VXF1232718526 2009-01-23 16.51.11 ........... ............<BR>
#COPIED... ........ ... ................. .......... ........ ........... ............<BR>
#DELETED.. adztolzu svd 2009-01-23 16.51.11<BR>
#<BR>
#ARCHIVE.. 17675 /oracle/VPP/oraarch/VPParch1_17675_603135330.dbf 2009-01-23 16.43.40 13243904 226263012 1<BR>
#SAVED.... adztolzu svd *VXF1232718526 2009-01-23 16.51.11 ........... ............<BR>
#COPIED... ........ ... ................. .......... ........ ........... ............<BR>
#DELETED.. adztolzu svd 2009-01-23 16.51.11<BR>
#<BR>
VPP util_file adztolzu svd 2009-01-23 16.47.22 2009-01-23 16.54.47 1 ........... 17670 17675 0 0 </P>
<HR>
<P>#</P>
<HR>
<P>BR0280I BRARCHIVE time stamp: 2009-01-23 16.51.11<BR>
BR0232I 6 of 6 files saved by backup utility<BR>
BR0230I Backup utility called successfully<BR>
BR0016I 6 offline redo log files processed, total size 220.128 MB</P>
<HR>
<P>Then I take tape with this data and try restore only from this tape<BR>
all datafiles and relevant archive redologs files (17670-17675) restored without errors <BR>
but in the end ERROR occurred</P>
<HR>
<BR>
<P>ERROR at line 1:<BR>
ORA-01195: online backup of file 1 needs more recovery to be consistent<BR>
ORA-01110: data file 1: '/oracle/VPP/sapdata1/system_1/system.data1'</P>
<P>ORA-00279: change 226268039 generated at 01/23/2009 16:43:40 needed for thread<BR>
1<BR>
ORA-00289: suggestion : /oracle/VPP/oraarch/VPParch1_17676_603135330.dbf<BR>
ORA-00280: change 226268039 for thread 1 is in sequence #17676</P>
<HR>
<BR>
<P>My online backup ended, before swith to redolog 17676<BR>
Why I need this file? I think files (17670-17675) should be enough?</P>
<P>Besides, the cange 226268039 generated exactly at moment Switching to next online redo.<BR>
Can I try open database regardless of this error?</P>
<BR>
<P>Thank you for your prompt response<BR>
Andrey Timofeev</P>
Edited by: Andrey Timofeev on Jul 21, 2009 4:53 PM
Edited by: Andrey Timofeev on Jul 21, 2009 4:54 PM -
Possibly corrupt prefs.js file. Need help with this file please.
I've been having a problem with sending/receiving text messages in Yahoo Messenger and I think I've narrowed it to the prefs.js file in Firefox. I'm using Firefox 3.6.25 on Windows XP sp3. The Yahoo Messenger window would not open when the appropriate mobile phone link was clicked. I uninstalled/reinstalled flash without change. I cleared cache, etc., without change. I created a new Firefox profile and I was able to get the Yahoo Messenger window to open. When I copied the prefs.js file from the old profile to the new profile, I encountered the problem again. I opened the prefs.js file with wordpad and noticed that editing should occur in about:config in the currently running Firefox browser. I briefly compared the two about:config tabs from the working profile and the non-working profile. They were significantly different. How do I make a copy of one so that I can paste it into wordpad and make the editing of the other one easier? Where can I find information about the individual parameters and their settings?
Hi,
Please see [[http://kb.mozillazine.org/About:config_entries this.]
[http://kb.mozillazine.org/About:config about:config]
You can try to '''Reset all user preferences to Firefox defaults:''' and '''Make Changes and Restart''' in the [https://support.mozilla.org/en-US/kb/Safe%20Mode Firefox Safe Mode] start screen which would also hopefully solve the issue. You can also try to manually '''Reset''' to defaults the modified entries by right-clicking on the bold entries (user set) in about:config. Clicking on the '''Status''' column header would sort the entries between user set (modified) and the defaults.
An easy way would be to create a [https://support.mozilla.org/en-US/kb/Managing-profiles new profile] and [https://support.mozilla.org/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile?s=profile&r=1&e=sph&as=s copy/transfer the needed personal data] from the old profile and start using the new profile. You can then delete or troubleshoot the old proile. Firefox stores your personal data and settings in [http://kb.mozillazine.org/Profile_folder another location (profile folder)] separate from its [http://kb.mozillazine.org/Installation_directory folders/files]. A new profile would have the default Firefox settings in '''Tools''' ('''Alt''' + '''T''') > [https://support.mozilla.org/en-US/kb/Options%20window Options] and [http://kb.mozillazine.org/About:config about:config], and usually would also be empty of '''Extensions''' and themes ('''Appearance''') in '''Tools''' > '''Add-ons''', and their settings. Also, a new profile would have no previous stored website cache/cookies/data/preferences: '''Tools''' > [https://support.mozilla.org/en-US/kb/Clear%20Recent%20History '''Clear Recent History'''].
[https://support.mozilla.org/en-US/kb/Profiles?s=profile&r=2&e=sph&as=s Profiles Howto]
[http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder & Files] -
Need to make this file smaller!
I'm a musician looking to put my tracks on myspace. The maximum file size for myspace is 6mb, and my export to iTunes is 72mb! What can I do?
shippo,
When you reference "50 fps", do you happen to know if that's fields per second or frames per second? Depending on the answer to that, you may or may not need to adjust that.
When it comes to file size, you have frame rate, frame size, compression type and data transfer rate affecting the final size.
As Russ and darby have suggested, data transfer rate is the main thing to experiment with (since you're publishing for Vimeo, the other setting are pretty much locked in).
I have found that when it comes to playing with the bit rate, a video with a 1280 by 720 frame size needs between 4,000 kilobits per second and 5,000 kilobits per second to maintian good image quality. While you might get good results at a lower rate, high contrast areas in the picture are very, very, very likely to show loss of image quality.
If you need to get your video up asap, start the upload late at night. As long as your internet connection doesn't drop out (knock on wood), you file will be uploaded by the morning.
Also, (for what it's worth) is there any place close by that has fast internet that you could use? If you have access to a computer lab at a local community college, a 1GB file will probably upload in minutes rather than hours.
-Warren -
I need to send a file in word to one of my emails, how do I do this
I have a file that I maid for my church. I need to email this file to the church and I don't know how to do this. Please help
Firefox doesn't do email, it's strictly a web browser.
If you are using Firefox to access your mail, you are using "web-mail". You need to seek support from your service provider or a forum for that service.
If your problem is with Mozilla Thunderbird, see this forum for support.
[http://www.mozillamessaging.com/en-US/support/] <br />
or this one <br />
[http://forums.mozillazine.org/viewforum.php?f=39] -
I need this file to be editable
I need to edit this file, how do i get it to do that?
Hi,
Are you trying to export your PDF file to Word or Excel file so that you can edit the content?
If so, follow the below steps:
Using Web UI:
Log into https://exportpdf.acrobat.com/signin.html with your Adobe ID and password
Select “Export from PDF”
Click “Select Files” button then choose your PDF file
Select the format from the list below
Check ON “Recognized text in” if your PDF file is scanned images to recognize the image to text
Click “Export” button
Click “Download” button in the progress bar after completion of exporting to download the file to your computer.
Using Adobe Reader:
Launch Adobe Reader X or Reader XI
Select “Tools” and click “Sign In” link to sign in with your Adobe ID and password
Select “Export PDF” then click “Select PDF file” link
Click “Convert”
Click “Download Converted File” link to download the file to your computer after the process is completed.
Hisami -
Archiving the file in to Multiple Directories
Hi,
I have a scenario which takes the file from the source system and uses proxy to post the data in to ECC.When it picks the file it has to pick from multiple directories.This i can achieve by using advanced selection for source files and
also i need to archive these files to multiple directories depending on the source directory. I have given an example below.
ex : Source directory : /users/system/location1/input
Archive Directory : /users/system/location2/archive
The file can also be picked up from
Source Directory :/users/system/location2/input
Archive Directory : /users/system/location2/archive
So i have to read the data from multiple directories and archive the same to multiple directories(Depending on the source).Can we achieve this using single file adapter(Communication channel)
Please help me to resolve this issue.
Thanks in advance
Sripathi G YogeshHi Sripathi,
no, you need for each folder an adapter resp a Communication Channel and, as well, a Sender Agreement for that Channel. But you can copy a well working channel and just change the path to the folder and to the archive. You can reuse the interfaces and the receiver determination as well. I dont see any need for BPM in that case.
Regards,
Udo -
Hi frnds,
I have a requirement which says we need to archive a file when it is in error in PI. How can we acheive this as we need to move error file into a specific folder.
Any Suggestions.
Thanks,
PrabhasHi Prabhas,
You need to use the option of "Archive faulty Source Files" in the processing tab of your Sender Communication channel.
Open your sender comm. channel --> goto the Processing tab -
> In processing parameters you will find an option
"Archive faulty Source Files " , check the corresponding checkbox -
> then you will get another parameter " Directory for Archiving Files with Errors" ---> Here you need to specify the path of the folder where you want to move the error file to archieve it.
Hope this will help you
Regards,
Rohit -
When i try to install ijii reactor it install almost ill end but then fail error is following:
Feature: ijji Auto Installer
Component: iAIFile1
File: C:\Program Files (x86)\Mozilla Firefox\Plugins\
How i i remove this file because it says thath already exist?You need to download this file: http://www.ijji.com/hanstartguide4ie.nhn
Run it and it'll remove the browser plugin from Firefox. Then re-run Reactor installer. -
Error after Restoring Datafiles in Archivelog but missing archive log files
Hi all,
I have taken backup yesterday monrning in Archive log mode but have lost all the archive log files. Yesterday night i have restored my DB .
I m happy to have my datafile contents till yesterday morning.
But after restoring when i try to open th DB, i m facing the following errors:
SQL> Startup open;
Oracle instance started but in mounted stagell
ORA-01589: must use RESETLOGS or NORESETLOGS option for database open
SQL> alter database open resetlogs;
Error: ORA-01113: file 1 needs media recovery
ORA-01110: data file 1: 'E:\oracle\'<SID>\sapdata1\SYSTEM_1\SYSTEM.DATA1'
SQL> recover database using backup controlfile until cancel;
ORA-00279 : change 26627919 generated at DATE TIMEneeded for thread 1
ORA-00289 : Suggestion E:\ORACLE\<SID>\ORAARCH\<SID>ARCHARC03020_0683715008.001
ORA-00280: change 266277189 for thread 1 is in sequence #3020
ORA - 01112: media recovery not started
SQL> recover;
ORA-00283: recovery session cancelled due to errors
ORA-01610: recovery using the BACKUP CONTROLFILE option must be done
Alert Log File:
Starting up ORACLE RDBMS Version: 10.2.0.2.0.
System parameters with non-default values:
processes = 80
sessions = 96
event = 10191 trace name context forever, level 1
sga_max_size = 633339904
shared_pool_size = 301989888
shared_pool_reserved_size= 30183260
filesystemio_options = setall
control_files = E:\ORACLE\IE6\ORIGLOGA\CNTRL\CNTRLIE6.DBF, E:\ORACLE\IE6\ORIGLOGB\CNTRL\CNTRLIE6.DBF, E:\ORACLE\IE6\SAPDATA1\CNTRL\CNTRLIE6.DBF
control_file_record_keep_time= 30
db_block_size = 8192
db_cache_size = 301989888
compatible = 10.2.0
log_archive_dest = E:\oracle\IE6\oraarch\IE6arch
log_buffer = 2854912
log_checkpoint_interval = 0
db_files = 254
log_checkpoints_to_alert = TRUE
dml_locks = 4000
undo_management = AUTO
undo_tablespace = PSAPUNDO
undo_retention = 43200
recyclebin = off
remote_os_authent = TRUE
remote_login_passwordfile= EXCLUSIVE
job_queue_processes = 1
background_dump_dest = E:\ORACLE\IE6\SAPTRACE\BACKGROUND
user_dump_dest = E:\ORACLE\IE6\SAPTRACE\USERTRACE
core_dump_dest = E:\ORACLE\IE6\SAPTRACE\BACKGROUND
optimizer_features_enable= 10.2.0.1
sort_area_size = 2097152
sort_area_retained_size = 0
db_name = IE6
open_cursors = 800
optimpeek_user_binds = FALSE
pga_aggregate_target = 402443468
workarea_size_policy = AUTO
statistics_level = typical
PMON started with pid=2, OS id=804
PSP0 started with pid=3, OS id=9580
MMAN started with pid=4, OS id=5840
DBW0 started with pid=5, OS id=8136
LGWR started with pid=6, OS id=8712
CKPT started with pid=7, OS id=1620
SMON started with pid=8, OS id=7084
RECO started with pid=9, OS id=9576
CJQ0 started with pid=10, OS id=9156
MMON started with pid=11, OS id=6000
MMNL started with pid=12, OS id=2856
Sat Apr 18 04:01:29 2009
ALTER DATABASE MOUNT
Sat Apr 18 04:01:33 2009
Setting recovery target incarnation to 1
Sat Apr 18 04:01:33 2009
Successful mount of redo thread 1, with mount id 1124466585
Sat Apr 18 04:01:33 2009
Database mounted in Exclusive Mode
Completed: ALTER DATABASE MOUNT
Sat Apr 18 04:01:34 2009
ALTER DATABASE OPEN
ORA-1589 signalled during: ALTER DATABASE OPEN...
Sat Apr 18 04:02:13 2009
alter database open resetlogs
Sat Apr 18 04:02:13 2009
ORA-1245 signalled during: alter database open resetlogs...
Sat Apr 18 04:11:05 2009
ALTER DATABASE RECOVER DATABASE UNTIL CANCEL
Sat Apr 18 04:11:05 2009
Media Recovery Start
Sat Apr 18 04:11:06 2009
Media Recovery failed with error 1610
ORA-283 signalled during: ALTER DATABASE RECOVER DATABASE UNTIL CANCEL...
Sat Apr 18 04:11:28 2009
ALTER DATABASE RECOVER DATABASE USING BACKUP CONTROLFILE
Sat Apr 18 04:11:28 2009
Media Recovery Start
parallel recovery started with 3 processes
ORA-279 signalled during: ALTER DATABASE RECOVER DATABASE USING BACKUP CONTROLFILE...
Sat Apr 18 04:17:23 2009
ALTER DATABASE RECOVER database using backup controlfile until cancel
Sat Apr 18 04:17:23 2009
Media Recovery Start
ORA-275 signalled during: ALTER DATABASE RECOVER database using backup controlfile until cancel ...
Any suggestions pls..............
Thanks & Regards,
SubbuHello Subbu,
> I have taken backup yesterday monrning in Archive log mode but have lost all the archive log files.
You mean you have taken an online backup and lost all your archive log files after that online backup?
SQL> alter database open resetlogs;
Error: ORA-01113: file 1 needs media recovery
ORA-01110: data file 1: 'E:\oracle\'<SID>\sapdata1\SYSTEM_1\SYSTEM.DATA1'
SQL> recover database using backup controlfile until cancel;
ORA-00279 : change 26627919 generated at DATE TIMEneeded for thread 1
ORA-00289 : Suggestion E:\ORACLE\<SID>\ORAARCH\<SID>ARCHARC03020_0683715008.001
ORA-00280: change 266277189 for thread 1 is in sequence #3020
To perform a recovery with an online backup you will need all archive log files until the end of the online backup. If you have lost them you are not able to recover (or open) your database in a consistent state.
So the only suggestion we can do is:
You need the archive log files that were created during the online backup to perform an incomplete recovery ... if they are gone you can not restore your database.
Regards
Stefan -
Hi all
I am using this code to trim a string and place it into a jMenu. Now I would like to change the out the way is looks to make it easier to view.
Like this:
Need to turn this file name lastName_FirstName_01_07_1980.xml into FirstName LastName 01.07.80
is this posible to do ?
can some me how ?
private void addItem(JMenu menu, char a)
File dir = new File("Epod Configuration/Orders To Upload");
File[] files = dir.listFiles();
for (int j=0; j < files.length; j++)
String trim = ""+files[j];
int ndx;
if ((ndx = trim.lastIndexOf('/')) != -1) trim = trim.substring(ndx+1);
if (trim.charAt(0) == a)
System.out.println(trim);
JMenuItem mi = new JMenuItem(trim);
menu.add(mi);
}Thanks
Craigthanks for that
but how do I put the two codes together ??
the file name also has .xml at the end what is the bet way of getting rid of that
this is what I have try but doesn't work
Please help
private void addItem(JMenu menu, char a)
File dir = new File("Epod Configuration/Orders To Upload");
File[] files = dir.listFiles();
for (int j=0; j < files.length; j++)
String trim = ""+files[j];
int ndx;
if ((ndx = trim.lastIndexOf('/')) != -1) trim = trim.substring(ndx+1);
if (trim.charAt(0) == a)
System.out.println(trim);
String s = "lastName_FirstName_01_07_1980";
StringTokenizer st = new StringTokenizer(s, "_");
String last = st.nextToken();
String first = st.nextToken();
String month = st.nextToken();
String day = st.nextToken();
String year = st.nextToken();
System.out.println(first + ' ' + last + ' ' + month + '.' + day + '.' + year);
JMenuItem mi = new JMenuItem(trim);
menu.add(mi);
} -
Not enough memory to save this file
hi ,
im doing a artwork with a size of 210" x 72" and 4 layers in total ( the size is actually half of the actual print size which is 420" by 144" ). But whenever i want to export the ai file to psd , the error prompting ' Not enough memory to save this file ' appears. I've changed my primary scratch disks frm Startup to C:\ ( which is ard 100gb ) but the error still exists. Is there anyone who could help me ? Need to send the works for print next week but i need to export this file to photoshop to do extra effects and changes.theres around 88gb left on my drive and my ai file is juz 1.84mb.
the settings for export is as follows :
Resolution - 72dpi ( as my workfile is being done to a scale of 50% , i used a lower dpi )
Options - Write layers with max editability
Anti-alias unchecked
Embed ICC profile checked -
help me to solve this problem, need to view this files asap.
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
There are other things that need your attention.
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
*Shockwave Flash 10.0 r32
Update the Flash plugin to the latest version.
*http://kb.mozillazine.org/Flash
*http://www.adobe.com/software/flash/about/ -
Every few days, I have this disk image labeled simply "Installer" appear on my desktop. By getting info, I find the name of the file is /private/tmp/tmpinstallmc.dmg. Since I have no idea what it is supposed to be installing, I am hesitant to install it. Since lte versions of MacOS 10 have seriously curtailed my ability to mess up my Mac by dinking around in the libraries and private folders, I have so far been unable to find it to remove it.
MacBookPro 15", Late 2011, 2.2GHz Inter Core i7, 16 GB 1333 MHz DDR3, OSX 10.9.5 (13F34I Found This on Another Site and followed it step by step and it removed the Installer.dmg from keep popping up. Now I'm asuming at some stage my kids clicked on MacKeeper or something like that and it Added it to a .plist
You may have installed the "Genieo" or "InstallMac" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
Back up all data before making any changes.
Besides the files listed in the linked support article, you may also need to remove this file in the same way:
~/Library/LaunchAgents/com.genieo.completer.ltvbit.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those you find, remove them as well.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those.
After removing the malware, remember to reset your home page in all the web browsers affected, if it was changed.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
Make sure you don't repeat the mistake that led you to install the malware. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates
if it's not already checked. -
I cannot download as I keep getting this when I try
Windows has the following information about this file type. This page will help you find software needed to open your file.
File Type: Firefox Browser Extension
File Extension: .xpi
Description: Compressed archive of primary file installation components – used by the Mozilla installer script to setup and install various applications. You may search the following Web site for related software and information:
Please advise how I go about downloadingdespite the workaround, it doesn't fix the real problem. It shouldn't be a huge deal for adobe to add support for multiple svn versions. Dreamweaver is the first tool i've used that works with svn that doesn't support several types of svn meta data. If they're going to claim that Dreamweaver supports svn is should actually support svn, the current version, not a version several years old. This should have been among the first patches released, or at least after snow leopard came out (and packaged with it the current version of svn).
does anyone know if the code that handles meta data formatting is something that is human readable, or where it might be, or is it in compiled code.
i signed up for the forums, for the sole purpose of being able to vent about this very frustrating and disappointing situation.
Maybe you are looking for
-
Importing Contact Persons through DTW
Hi, I´am trying to import Contact Persons through DTW. These "Contact Persons" belong to Business Partners that already have "Contact Persons". I want to add new contact persons to these Business Partners. The problem that instead of adding those Con
-
Can't copy Analysis Text in Premiere Pro
Hello, I can't copy the Analysis Text in Premiere Pro. I had no problem analyzing the text. When I right-click and select "Copy All", it only copies the word I highlighted. I don't get the Copy All option when I right-click an empty space within the
-
My imovie all of a sudden stopped working when I was in the middle of making a project and then all of a sudden when I tried to click on something my computer just beeped at me. I cant even exit out of the program! Or shut down my computer unless I q
-
Voice over..PLEASE HELP!! No idea what my niece did.
woke my mac up from sleep and all of the sudden it is talking to me, and Voice over utility keeps popping up, anybody have any idea how to turn it off, because it is real annoying. thanks!
-
Migration from 2007-2013 - Installation of 2010 server?
We have Exchange 2007 installed currently (SP3, latest UR). I installed Exchange 2013 in preparation for migration, started working on configuration. After doing some digging, we realized we don't have any licensing for 2013 (miscommunication). The o