Do I need to be online to use Skype To Go?

I'm just confused. Has Skype now begun using cell towers to offer cell service for mobile phones using Skype To Go?? Or must I still be on line (internet)?

AradiseDP wrote:
I'm just confused. Has Skype now begun using cell towers to offer cell service for mobile phones using Skype To Go?? Or must I still be on line (internet)?
Hello
SkypeToGo is to facilitate calling from cellphones at Skype's low rates. The service uses the cellular network rather than the internet so you don't need to be online to use it.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Similar Messages

Do I need to be online to use creative cloud? I want to use it in the field without internet connection.

Do I need to be online to use creative cloud? I want to use it in the field without internet connection.

Creative Cloud Help | Creative Cloud / Common Questions
Do I need to be online to access my desktop apps?
No, the desktop applications in Creative Cloud, such as Photoshop and Illustrator, are installed directly on your computer, so you don’t need an ongoing Internet connection to use them.
An Internet connection is required the first time you install and license your apps, but you can use the apps in offline mode with a valid software license. The desktop apps will attempt to validate your software licenses every 30 days.
Annual members can use the apps for up to 99 days in offline mode. Month-to-month members can use the software for up to 30 days in offline mode.

Online number on Skype handheld phone?

Hi,
Can I take calls made on my Online Number using Skype 3 MobilePhone? Is there any cahrge for that or do they count as just calls made to my Skype account (and no forwarding cahrges apply)?
Thanks

hollymitchell3 wrote:
Hi,
I recently downloaded the skype app to my iphone 4 and have then bought a 3 month subscription so i can have a landline number. I have people calling me on it from the same suburb i have put on the account and it is costing them std rates. shouldn't it be a local call cost?
It all depends on what country you are in, where your callers are, what telephone carrier serves those callers, and what your number is. It is possible that callers could be liable for call charges, depending on their location and your number.
Please don't post complete numbers here. If you post any numbers, please replace the last 4 digits with XXXX. Someone here may be able to do some research, depending on the situation and how much information for the telephone carrier your callers use is posted online. Otherwise, they - or you - would need to contact that carrier to ask why they are incurring STD (long-distance) charges instead of the calls being treated as local calls.
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

Need help in creating online exam using jsp

Want to create a small project for online exam using jsp. As of now I am unable to find, how can I
Get random questions from mysql database
Put the timer, so that the exam result is shown automatically after the specified time for exam is overMore queries to follow.

I started learning java only a short time ago, so it's obvious that my knowledge is limited. Else I wouldn't have asked the question here.

Need help writing host program using LabView.

Need help writing host program using LabView.
Hello,
I'm designing a HID device, and I want to write a host program using National Instrument's LabView. NI doesn't have any software support for USB, so I'm trying to write a few C dll files and link them to Call Library Functions. NI has some documentation on how to do this, but it's not exactly easy reading.
I've written a few C console programs (running Win 2K) using the PC host software example for a HID device from John Hyde's book "USB by design", and they run ok. From Hyde's example program, I've written a few functions that use a few API functions each. This makes the main program more streamlined. The functions are; GetHIDPath, OpenHID, GetHIDInfo, Writ
eHID, ReadHIC, and CloseHID. As I mentioned, my main program runs well with these functions.
My strategy is to make dll files from these functions and load them into LabView Call Library Functions. However, I'm having a number of subtle problems in trying to do this. The big problem I'm having now are build errors when I try to build to a dll.
I'm writing this post for a few reasons. First, I'm wondering if there are any LabView programmers who have already written USB HID host programs, and if they could give me some advice. Or, I would be grateful if a LabView or Visual C programmer could help me work out the programming problems that I'm having with my current program. If I get this LabView program working I would be happy to share it. I'm also wondering if there might already be any USB IHD LabView that I could download.
Any help would be appreciated.
Regards, George
George Dorian
Sutter Instruments
51 Digital DR.
Novato, CA 94949
USA
[email protected]
m
(415) 883-0128
FAX (415) 883-0572

George may not answer you. He hasn't been online here for almost eight years.
Jim
You're entirely bonkers. But I'll tell you a secret. All the best people are. ~ Alice

Do I need continuous internet connection to use cc

I frequently do not have an internet connection. Can I still use Photoshop and Lightroom when disconnected?

See also Creative Cloud Help | Creative Cloud / Common Questions
Do I need to be online to access my desktop apps?
No, the desktop applications in Creative Cloud, such as Photoshop and Illustrator, are installed directly on your computer, so you don’t need an ongoing Internet connection to use them.
An Internet connection is required the first time you install and license your apps, but you can use the apps in offline mode with a valid software license. The desktop apps will attempt to validate your software licenses every 30 days.
Annual members can use the apps for up to 99 days in offline mode. Month-to-month members can use the software for up to 30 days in offline mode.

Does Nokia Maps need to be online to work sometime...

Hi all,
I am very confused about the use of the free Nokia Maps applications. I have an N97 mini, and I was using the maps application throughout Egypt last week.
I had the settings placed "offline", and the application would open and would work fine, but whenever I did a search for a place, most times it would not find the place. Even common street names or popular tourist sites, could not be found offline. I then changed the settings to "online", and when I would do the same searches, it now would fine the places and streets.
However, when I checked my mobile phone provider account, using the "online" mode was using up all my phone credit.
So I am confused about whether I must be online to use the Nokia Maps application to find places, or should it work offline. What is the difference? And why does Nokia tell us its free, if in fact it uses up my phone account's data to find places that should already be in the maps application?
So I have 3 main questions I am unsure about:
1. Do i need to be online to search for some places, as it seems that offline it does not find all places?
2. If I am online, should it be charging me, or should it still be free?
3. When I update the maps, as I did, should that not include all the places on the maps that I find in online mode? Or are some places only found if I an online?
I must say we had so many problems using the maps application throughout Egypt- I do not recommend it to anyone for this place. It got us lost so many times, and once we ended up in some isolated poverty stricken town near the Pyramids of Sakkara- it was hell getting back! And it only worked when I went into online mode, and used up all my phone credit.

Refer these threads..
/t5/Maps-Navigation-and-GPS/Ovi-maps-when-offline-search-not-working/m-p/614321/highlight/true#M1668...
/t5/Maps-Navigation-and-GPS/No-offline-search-OVI-Maps/m-p/644579/highlight/true#M19586
/t5/Maps-Navigation-and-GPS/ovi-map-search-offline-problem/m-p/741575/highlight/true#M26571
..and you are getting charged for using the Internet (Packet data) by your service provider and not by Nokia /OVI..
--------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

Do we need rpm package oracleasmlib for using Oracle ASMLib?

..The Oracle ASMLib kernel driver is now included in the Unbreakable Enterprise Kernel.
No driver package needs to be installed when using this kernel.
The oracleasm-support and oracleasmlib packages still need to be installed from ULN+
http://www.oracle.com/technetwork/topics/linux/asmlib/index-101839.html
i use:
root@oel62 ~]# uname -r
2.6.32-300.3.1.el6uek.x86_64I understood:
-oracleasm: is include in the kernel(kernel/drivers/block/oracleasm/oracleasm.ko)
-oracleasm-support: can be found on the install ISO or in Oracle Public Yum Server.
-oracleasmlib: ? not found in Oracle Public Yum Server! can be found only in ULN?
Question: Do we need it, rpm package oracleasmlib for install Oracle ASMLib?
I have add kernel module oracleasm (via modprobe) and install rpm oracleasm-support
(but without oracleasmlib) and it works !!??
..and I'm confused ???

Dude wrote:
Saying that it works seems quite audacious to me. Well, I can start the engine, let's fly! I'd rather remain on the ground ;-)Hi Dude!
You do not mean I talk nonsense, right?
Maybe! But once again i will protocol here what i did.
It would be very nice if you take a look here:
Ok! Step by step..
My environment: Oracle Linux 6.2 in VMWare
Linux kernel:
[root@oel62 ~]# uname -r
2.6.32-300.3.1.el6uek.x86_64Install oracleasm:
[root@oel62 ~]# modprobe oracleasm
[root@oel62 ~]# modprobe -l oracleasm
kernel/drivers/block/oracleasm/oracleasm.ko
[root@oel62 ~]# lsmod | grep oracle
oracleasm              48482 1 Install oracleasm-support:
root@oel62 ~]# yum install oracleasm-support
Installed:
oracleasm-support.x86_64 0:2.1.5-1.el6
Complete!I have only oracleasm-support(no oracleasmlib!)
[root@oel62 ~]# rpm -qa| grep oracleasm
oracleasm-support-2.1.5-1.el6.x86_64
[root@oel62 ~]# Status:
[root@oel62 ~]# oracleasm status
Checking if ASM is loaded: yes
Checking if /dev/oracleasm is mounted: noConfigure:
[root@oel62 ~]# /etc/init.d/oracleasm configure
Default user to own the driver interface []: grid
Default group to own the driver interface []: asmadmin
Start Oracle ASM library driver on boot (y/n) [n]: y
Scan for Oracle ASM disks on boot (y/n) [y]: y
Writing Oracle ASM library driver configuration: done
Initializing the Oracle ASMLib driver:                     [ OK ]
Scanning the system for Oracle ASMLib disks:               [ OK ]Status again:
root@oel62 ~]# /etc/init.d/oracleasm status
Checking if ASM is loaded: yes
Checking if /dev/oracleasm is mounted: yesI create 2 virtual disks and then create partition on those disks.
Result: /dev/sdg1, /dev/sdh1
and now create ASM disks:
[root@oel62 ~]# oracleasm createdisk asmdisk1 /dev/sdg1
Writing disk header: done
Instantiating disk: done
[root@oel62 ~]# oracleasm createdisk asmdisk2 /dev/sdh1
Writing disk header: done
Instantiating disk: donelistdisks
[root@oel62 ~]# oracleasm listdisks
ASMDISK1
ASMDISK2querydisk
[root@oel62 ~]# oracleasm querydisk -d /dev/sdg1
Device "/dev/sdg1" is marked an ASM disk with the label "ASMDISK1"
[root@oel62 ~]# oracleasm querydisk -d /dev/sdh1
Device "/dev/sdh1" is marked an ASM disk with the label "ASMDISK2"-Create diskgroup TEST_DG:
run asmca, step through all screens, specify "Disk discovery path"
/dev/oracleasm/disks/*Result:
ASMCMD [+] > lsdsk -p -G test_dg
Group_Num Disk_Num      Incarn Mount_Stat Header_Stat Mode_Stat State   Path
        1         0 3915949404 CACHED      MEMBER       ONLINE     NORMAL /dev/oracleasm/disks/ASMDISK1
        1         1 3915949403 CACHED      MEMBER       ONLINE     NORMAL /dev/oracleasm/disks/ASMDISK2-Run dbca create a database testdb with storage using diskgroup TEST_DG
and here is the DB testdb on diskgroup test_dg
[grid@oel62 ~]$ rlwrap asmcmd -p
ASMCMD [+] > ls test_dg/testdb
CONTROLFILE/
DATAFILE/
ONLINELOG/
PARAMETERFILE/
TEMPFILE/
spfiletestdb.ora
ASMCMD [+] > ls -l test_dg/testdb/datafile
Type      Redund Striped Time             Sys Name
DATAFILE UNPROT COARSE   JUN 27 11:00:00 Y    SYSAUX.257.787055133
DATAFILE UNPROT COARSE   JUN 27 11:00:00 Y    SYSTEM.256.787055133
DATAFILE UNPROT COARSE   JUN 27 11:00:00 Y    UNDOTBS1.258.787055133
DATAFILE UNPROT COARSE   JUN 27 11:00:00 Y    USERS.259.787055133
ASMCMD [+] > Service status:
[grid@oel62 ~]$ srvctl status diskgroup -g test_dg
Disk Group test_dg is running on oel62
[grid@oel62 ~]$ Once again i did not install oracleasmlib!
I have no RPM oracleasmlib on my system:
root@oel62 ~]# rpm -qa| grep oracleasm
oracleasm-support-2.1.5-1.el6.x86_64It is a "perfect" installation, or what do you mean?
It works fine, but why it works??
Well, folks! Tell me now why it works without oracleasmlib ?
What happened, what is going on here?
Thank you for reading my long text here!

HT201471 What model do you need to be able to use a charge scanner when their is no wi-fi available

What model do you need to be able to use a charge scanner when their is no wi-fi available

Ohh, you mean credit card scanner?
That would be up to whicher scanner you choose. The manufacturer would determine which iPad or iPhone versions or IOS versions their device supports.
The Square scanner from the Apple Online store only needs iOS 5. So pretty much any model of iPad should support it.
System Requirements
iOS 5.0 or later
Square app; free download from App Store in iTunes
http://store.apple.com/us_smb_78313/product/H8332LL/B/square-credit-card-reader

Disappearing comments / Viewing wrong comments in online commenting using WebDAV

We are having an issue of disappearing comments / Viewing wrong comments for users
when they use online commenting using Adobe Acrobat 9.1.3 (WebDAV)
When user posts his comments online using send and recieve comments , the comments file is prepared directly under webDAV root (instead of an MD5 hash folder). The issue is seen when users posts his comments from Adobe Acrobat 9.1.3. When we checked the same with Adobe Acrobat 8.0 , 9.0.0 , 9.2.0 it worked.
What could be the issue ? Is it an issue specific to 9.1.3 or do we need some settings on Acrobat side ?
thanks
Nachiket

Just to be clear, you are putting those comments in a formula, not in the select expert or anything like that?
I got the same version of Crystal developer as you and I just created a new report, created a new formula and put in some comments and save the report and opened it and the comments are still there.
What if you create a new report and create a new formula with some simple formula in it.
I used this:
//This is a comment
1=1;
//This is another comment
"This is a text"
If those comments disappear on you as well then something is really strange. There is nothing new in how comments are shown as compared to Crystal 10.
What OS do you have and what data source are you working on?
Cheers,
Josh

Need Help With Military DTD Using FrameMaker 8

Fellow Forum Members,
I hope someone out there with experience in using Department of Defense DTDs with FrameMaker can contribute to this thread.
Attached is the MIL STD 400051-2 DTD that needs to play with FrameMaker. Does anyone out there know where I could find FrameMaker templates already setup that comply and play with the MIL STD 400051-2 DTD standard? If the Department of Defense is freely distributing the MIL STD 400051-2 DTD, shouldn't somebody in the Department of Defense also be providing MIL STD 400051-2 FrameMaker Templates for free that are already setup? I would greatly appreciate if anyone out there could provide an online source where I could download MIL STD 400051-2 FrameMaker templates.
Lastly, can anyone out there clarify what the purpose of the entities are inside the "Charant" and "Boilerplate" folders? The Department of Defense does not provide a readme file that define what the "Charant" and "Boilerplate" folders are about.
Any info will be greatly appreciated. Thanks.

I'll answer the specifics that I know about your questions, but please look at the post from Srini for additional info:
1) Do i need to do full export using SYS/SYSTEM user.
exp80 system/manager file=c:full.dmp log=c:\full.txt full=y consistent=yA full export will move as much information (metadata/data) as possible. In order to do a full export/import, you need to do this from a
privileged account. A privileged account is one with EXP_FULL_DATABASE for export and IMP_FULL_DATABASE for import.
2) Will there be any data corruption while export.The data in the objects that you are exporting is being read, nothing is written to user data. I'm not sure what this is available in 8.0.6,
but if you need a consistent export, look to see if consistent=y is available in 8.0.6. All this means is that the dump file created will have
consistent data in it.
3) Is export/import the only method of migration/upgradation.If you are changing hardware, the only supported way from 8.0 to 10.2.0.4, that I know of, is using exp/imp.
Hope this helps.
Dean

I need 2 iphones unlocked to use in the philippines,

I need 2 iphones unlocked to use in the philippines, I am in Tagum city. where can i get this done. Why is apple support website so very bad. It does not recognise the philippines at all. let alone a city within the country.

Shop online...AFAIK, iPhone 5 is not officially available there, yet:
http://store.apple.com/ph

Re: Do I need ongoing Internet access to use my Creative Suite applications?

The update for AAM (Win) does not resolve the issue for me. I have to login to relicense my software at least once a day. It is very frustrating and it requires that I have internet access to use the software.
Please resolve this quickly.

Hi David,
Sorry for hassle, I'll see what I can do to help. The software does need to be online to do the license check every 30 days but should activate all the time like you describe. Is the machine online all the time or only intermittently?
It looks like there might have been issues with billing, I'll see what I can figure out and let you know.
-Dave

Do I need an internet connection to use Adobe CC14

Do I need an internet connection to use Adobe CC14?

Hello,
so sorry, this Adobe website didn't change into english language: Adobe Creative Cloud – Häufig gestellte Fragen >>> Funktionsweise >>> Muss ich ständig online sein, um die Desktop-Applikationen der Creative Cloud nutzen zu können?
Nein. Da alle Applikationen (wie Photoshop und Illustrator) lokal installiert werden, ist für die Nutzung keine permanente Verbindung zum Internet notwendig.
Eine Internet-Verbindung ist für die Erstinstallation und Lizenzierung der Desktoptools notwendig. Mit einer gültigen Software-Lizenz können die Applikationen auch offline verwendet werden. Beachten Sie, dass die installierten CC-Applikationen Sie alle 30 Tage zur Validierung Ihrer Software-Lizenz auffordern werden.
Mitglieder mit einem Jahres-Abo können die installierten CC-Applikationen bis zu 99 Tage lang offline nutzen. Mitglieder mit einem Monats-Abo können die installierten CC-Applikationen bis zu 30 Tage lang offline nutzen.
What means something like:
An internet connection is required for the initial installation and licensing of desktop tools. With a valid software license, the applications can also be used offline. Note that the CC installed applications you will call every 30 days to validate your software license. You can use the installed CC applications for up to 99 days offline.
Hans-Günter

I have recently purchased the latest ipad. Got to say I am extremely dissapointed that it does not support Java or Flash which are platforms needed to do online business banking. I am now faced with ditching it and replacing it with a competitors product

I have recently purchased the latest ipad. Got to say I am extremely dissapointed that it does not support Java or flash which are platforms needed to do online business banking. I am now faced with ditching an expensive toy for a competitors product that offers full business functionallity. Is there any way round this ? It seems extremely bad form on apples part not to support this or make it very clear of the products limitations at the time of purchase.

Well, my bank has an app but the website does not use Flash or Java. While my credit union doesn't have an app, their website doesn't require Flash or Java either.
I pay all my bills online, bank, and access my brokerage accounts. None of the sites I have encountered require Flash or Java. Some government sites do require Flash so I use Photon, it's a browser that does Flash content very well. So you might check out some alternatives browsers.
Otherwise I suppose you will either dump you bank, your iPad, or just not do online banking.

Do I need to be online to use Skype To Go?

Similar Messages

Maybe you are looking for