Do i need to Choose a network carrier, and witch one should i choose when i live in Norway

I live in Norway and are going to buy a new iPhone5, but do i have to choose any of the network Carrierthey have here?
And if i have to choose one, witch one do i have to choose?

so if i dont want to lock it to any of those carrier, then i guess the price will get higher?

Similar Messages

What is the difference between the three network carriers and if i am to use iPhone 5 in Bangladesh, which network carrier should i choose?

I had one confusion about the network carrier of which one to chose. Actually I do not know the difference between them. Are they related to some sort of sim cards? I would be grateful if anyone could help me to get away this confusion.

Unless we are in Bangladesh, nobody here can really help you with this. If you purchased the phone there, you need to do that research for yourself. You are the one who is there and on the spot so noone else can really help you with that.
You need to contact the available carriers in your area and see what the differences are for yourself.
The phone companies supply you with the appropriate sim cards when you take out a contract with them.
Also, where did you purchase the phone from in the first place and is it an unlocked phone? If the phone is not unlocked, then it won't work.

HT5439 Has anyone had the Network time and date error with Apple TV when traveling?

Has anyone had the Network time and date error with Apple TV when traveling?

Jasion,
Maybe a bit beside the question, but it is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky, at least for a while, but it is better to be safe than sorry.
In addition to the (far greater) risk of file corruption, some issues are mentioned here:
http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html

Why does my error message say "Could not sign in. Please check your network connection and try again." for Facetime when I am connected to the internet?

Trying to access my Facetime and I haven't in a while. It is not allowing me to sign in. I am conneected to my Wi-Fi and am sitting right on top of it and it still says i need to check my network connection. My internet connection is fine and works with everything else but Facetime. What's up with that??

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>General>Date&Time and make sure it is set to Automatic
- Go to Settings>wifi>the connected network and change the DNS to Google's 8.8.8.8
- Go to Settings>iTunes and App Stores and sign out and sign back in

HT3180 setting date and time - my apple tv get stuck and says it needs to set the network date and time. Does anyone know how to do this?

My apple tv gets stuck and says it need to set the date and time on the network. Does anyone know how to do this?

I was able to get my Apple TV working again by downgrading the firmware following the instructions in this message:
https://discussions.apple.com/message/20008613#20008613
In case that message disappears, here's my translation:
1. Connect your Apple TV to your computer via USB. Don't plug in the power cable.
2. Download the older 5.0.2 firmware from Apple here:
5.0.2 (Apple TV 2): AppleTV2,1_5.0.2_9B830_Restore.ipsw
5.0.2 (Apple TV 3): AppleTV3,1_5.0.2_9B830_Restore.ipsw
3. Open iTunes and select the Apple TV. Hold down the option key and press the restore button at the same time.
4. In the dialog that opens select the firmware that you downloaded.
5. The restore process will take a few minutes. Once it's done plug your Apple TV back into your TV. If the date and time message persists just press the menu button to skip it. This got mine working again.

Desperately need help with a networked printer and SMB sharing for windows

Complete xServ newbie here. I'm a windows/novell admin, with limited experience in Unix and Linux.
Against my advice, a client of mine that owns a small office of 20 people bought an XServG5 to act as a server for 20 mixed Windows PCs. File sharing services are working fine. I've created the users, set up groups and rights - that's all good.
I cannot get an SMB shared printer to work from the windows machines. They run through the network printer install just fine, it shows up online, etc. However, when print jobs are submitted they DO show up in the printer queue on the server, sit there for a while, and then get moved to the completed box.
They never print. There's not any indication that the job is even submitted to the printer. I can print to the printer just fine from the server itself, but the windows clients don't work, but they don't return an error message.
Print services are running on the server, I've configured the printer name to be less than 12 characters for the share, and indeed it does pop right up during the "add network printer" routine.
Ideas? I'm not even sure what questions I'm supposed to be asking, such is my ignorance of the OS. I do know that I followed the documentation to a T, and according to Apple this should work.
Thanks in advance for the help. I'm extremely frustrated.

We have the same problem. Our printer worked for about 2 years but failed similar to yours after a system update.
Can you go into the Windows service, Logs, Printer Service. Copy and paste the log here. What I am looking for is a line like lpr: CANNOTCONNECTCLIENT or something similar to this.
What I expect is that you have a problem where the cups defined printer is not usable. We can't get our problem fixed either - but am just curious if you have the same thing. We reloaded our server, applied all of the update and still cannot get it to work.
Again, I think it stems from the update.

Which option I need to choose when I export AVCHD to a movie , without transcoding?

It says that Adobe Premiere CS5 can import and natively edit AVCHD content . without transcoding. How can I do this ? It seems when I export AVCHD MTS from my camera to Premiere , and want to join multiple MTS clips into ine timeline , which options may I choose to export , without transcoding?
I have try Blu-ray it transcodes to m4v , or using adobe dinamic link to encore , it ask me to transcode.

Premiere does import and edit native AVCHD.
Alll exports are encoded / transcoded.
AVCHD is a camera ( source) codec only. Not a delivery format from an edit.

HT1420 i need to authorize my current computer and deauthorize one of the other five. I cant get to the point of just doing one it says deauthorize all

I need to deauthorize one of mu five computers but it does not allow me to select only option is to deauthorize all

You may only de-authorize a single computer from that computer. If you don't have access to the other authorized computers then you must deauthorize all of them.
Authorization and Deauthorization
Macs: iTunes Store- About authorization and deauthorization.
Windows: How to Authorize or Deauthorize iTunes | PCWorld.
In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it. Or turn on Windows 7 and 8 iTunes menus: iTunes- Turning on iTunes menus in Windows 8 and 7.
More On De-authorizing Computers (contributed by user John Galt)
You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
1. Open iTunes on a computer
2. From the Store menu, select "View my Account..."
3. Sign in with your Apple ID and password.
4. Under "Computer Authorizations" select "De-authorize All".
5. Authorize each computer you still have, as you may require.
You may only do this once per year.
After you "de-authorize all" your authorized computers, re-authorize each one as required.
If you have de-authorized all computers and need to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - Contact Us.

Two questions, does resetting the Mac Book Pro late 2008 speed up after reset? Also, do i need to remove my WLAN router and get only a plain MODEM when setting up my AIR PORT time machine?

Two questions, does resetting my Mac Book Pro late 2008 speed up after resetting? Also, do i need to get rid of my WLAN router to make my AIR PORT time capsule work?
Am grateful for any answers...its a 15,4"...
Will soon buy a new one, is battery better on 13 than 15 "?
Have a great day...

If you mean restoring OS X, that won't necessarily have any effect on speed.
Not enough free space on the startup disk can slow your Mac down.
Click your Apple menu  top left in your screen. From the drop down menu click About This Mac > More Info > Storage
Make sure there's at least 15% free disk space.
More tips here > Mac troubleshooting: What to do when your computer is too slow | Macworld
No need for the WLAN router with AirPort Time Capsule.

HT1386 It says to click the device button in the upper right corner....there isn't one. Itunes doesn't even recognize my devices since I did the most current update. I have two iPhones, thru different carriers, and neither one works now!

I did the latest iTunes update...I have 2 iPhones--each thru a different provider. Now, I can't sync to download any music from iTunes. iTunes doesn't recognize either device now. I went thru diagnostics, didn't work. I tried the suggestions from Apple...it says to click the device button in upper right corner....there isn't one. When I connected each for the first time after update, it "installed device drivers". I have checked for further updates on iTunes--nothing. I made sure there were no updates listed for iPhones...all up to date. I get an error code and from what I have looked through in forums etc, it seems like a lot of people are getting it...0ex000084 I believe it was. Windows opens to download photos but that's it. Devices are not listed at all. I have tried all 3 USB ports in computer too. I have never had any problems before this update!! HELP! I just bought $15 worth of music I can't download to phones now!

On the left hand side of iTunes do you have the sidebar up left hand side?
If this is not up then try this, with iTunes open press "Control" and "s" together and it should bring it up. From the sidebar it should show an option devices with the iPhones underneath it.

I have 2 lan connections, 1 connect to local network server and other to internet, how do i configure firefox to open website on my local network connection and internet also

''locking as a duplicate - https://support.mozilla.com/en-US/questions/812283''
I have 2 local area connections in my computer, one connects to local office network server and another to the internet. when i use firefox i want to configure it to use it to connect to my local office network server website which has address as http://199.123.9.1 and also internet web address simultaneously,

I found the solution, myself, you need to go to network settings and then select manual proxy setting and provide the ip address of the internet server . that's all
"it is not OS setting up problem, around DNS and routing Problems." as stated by you,
anyway thanks.

Enabling Network Security with Sun One webserver

Hi experts
I have a sun server with solaris and sun one webserver loaded
now when i am connecting the web server from any of the client browser it is not asking for any paassword
how can i enable the network password for webserver
Damu

I can't believe it, the problem was because I have formated the object definition element in obj.conf with a tab before Service. It seems Service needs to start from column 1, was sun webserver made is cobol?
<Object name="weblogic" ppath="*/weblogic/*">
Service fn=wl_proxy WebLogicHost=laptop-vikas.nj.sena WebLogicPort=7001 PathTrim="/weblogic"
</Object>

I upgraded my iphone to 5.0.1 and can not find carrier and can not make a call freezed.

I upgraded my iphone 4 to ios 5.0.1 yesterday. Today the device can not find carrier and if finds than it freezes when I tap call. I swictched on and off but no change.

No. There is no legit way to go back at all.
It seems that you had a hacked iphone that was locked back to the rightful carrier when you updated as it should.

Need help choosing how to extend my existing home network to my detached garage?

I have done as much research as possible on this scenario but cannot seem to match the ideal solution with my wants. Perhaps I simply just do not understand networking as well as I thought I did. Either way, any helpful information or suggestions are greatly appreciated.
Objective: Extend my wireless network to my detached garage.
My current ISP provider is Time Warner Cable. I have RoadRunner Extreme, which in my area gives consistent speeds of 50 Mbps download and 5 Mbps upload when I am connected via ethernet cable. When I upgraded to the "Extreme" package i found out I was forced to use their Motorola SB6580 ... its a DOCSIS 3.0 cable modem + wireless router. I was able to access the Motorola's setup options on the internet and I disabled the wireless function. This has allowed me to use my Time Capsule as the primary router to provide wireless access on my home network. I have not had any issues with this setup and is my preferred way to operate.
I have recently moved my home office to the 2nd story of my detached garage and need to extend my wireless network to meet the demands of all my gear. I have decided to achieve this goal by going with one of the following 3 options:
1.) enable the wireless function on the motorola modem making it the primary router. move my time capsule out to the office and use it in bridge mode. However I do not think I understand bridge mode correctly. I thought the secondary router (in this case my TC) in bridge mode needed to be connected w/ an ethernet cable at all times to enable this feature? If I understand similar networking discussions I will lose the ethernet ports with this option? If this isnt called Bridge mode once i take away the ethernet cable what is it "technically" called?
2.) buy a 2nd airport extreme base station and create the same type of wireless network extension setup. The difference here is I would leave my motorola's wireless features disabled, use 2 apple products that speak apples to apples wirelessly and relieve myself of all the headaches involved with a neopolitan setup. This seems like the obvious choice b/c Apple products are much more user friendly, but I dont want to spend the $200 on a new router if I can achieve a comparable setup by just enabling the equipment I already have.
3.) use either of these 2 scenarios above & go buy a 150' ethernet cable to join them together. if this is the case wouldnt a $50 hub suffice on the end of the cable? I dont necessarily need to have wireless, just reliable connectivity. I can access the existing wireless network now, but download speeds are not great and things really start to slow down when i have multiple clients connected. I would rather not have to drill through exterior walls, bury conduit and install learn how to install data wall plates, but i will if this is the pros far out way the cons.
Current modem/router placement: if standing @ the front door of my 1 story house facing out towards the street my motorola modem/router is in the front right-hand corner of the house.
Distance location of the detached garage office setup: if standing @ my front door my my work area is in the far back left corner of my property. it is approx 175' from the router and on the 2nd story of the garage. I said 150' cable earlier b/c i could relocate the router to a bedroom on the opposite end of the house, however this would eleminate the current wired status of the items connected to it and I would prefer to keep them wired in.
clients connected in the house: (4) apple tv's; Roku; Xbox; Wii; Playstation 3; (2) Lenovo laptops; iPad; (2) Blackberry's; (2) iPhones; iPod touch; (2) wireless netowrk printers; (2) smart tv's ... a handful of these are currently wired into the time capsule now which provides an uninterupted viwing experience for the MLB package. This of course trumps all opportunity costs involved with moving the router. There is nothing more frustrating than a screen buffering in the botton of the 9th inning after you've sat there for 3 hours.
clients connected in the office: (2) 27" imacs; apple tv; iPad; network printer; Wii; Harmony Link universal remote; Mac Book Pro ...
I have approx 5TB of digital media that is shared over the network via shared iTunes libraries that I would like to access as well. iCloud helps with all of our household gadgets as far as acessibility but with all the backups going on simutaneously it also creates headaches when you need the throughput. I need to do a better job of managing those settings. nonetheless, I would like some guidance on the best way to extend my current netowrk, suggestions for better scenarios i did not mention and thus am probably not aware of and any networking 101 schooling if it doesnt sound like i understand the way bridge mode/network extension works. sorry for the long post and thank you for your time & help.

Ethernet beats all other solutions hands down..
A single ethernet connection from wherever is the closest point in the house to the garage office... wins. You can plug a router working as AP and switch or pure switch on to it. Get a cabler in to do the job.. and they can probably figure it out and do the whole job whilst you scatch your head.. yes you will pay for it.. but a cabler knows how to do it. And most likely leave the inside network exactly as it is. Since office is important to be reliable.. there is one and one only reliable method.. ethernet.
If the garage and house are on one electrical circuit.. which is doubtful if it is a separate building then EOP adapters can often work well.. They do not handle earth leakage protection, breakers (rather than fuses) or meters at all well.. but if they are simply all connected to power.. behind the same meter and using old fashioned fuse box.. EOP rated at 200mbps or some now are 500mbps can work reasonably well. Speed about the same as wireless at its best but if it works when installed will generally not change with the weather, moon, and wind direction which wireless is liable to do.
Wireless bridging.. hmm avoid if possible. For reliable connection no.. apple products can do wireless repeater but as you mentioned that turns off the ethernet ports except for the Express.. that is the only unit you can use as a bridge and plug a switch into it. Why Apple why??
So if you want to bridge two points by wireless buy specialised wireless bridge.. that means an AP in the house plugged into the existing network.. and AP unit perhaps on the outside of the garage.. or in windows if you have a window in the house that looks at a window in your office. Look at products from companies like ubiquiti.. they are not too expensive but professional equipment and designed for precisely this kind of work.
Hence the reliability is dramatically better than domestic stuff.. and will require a lot less work to maintain the link.
Conclusion.. wire it.
Unless you rent the house.. an investment in ethernet cabling install once properly and forget .. beats every other solution even if it costs x5 as other solutions.

Need to know what cell carriers/phones support bluetooth tethering

I had the MotoQ9C for about a year and was using it (OS Windows Mobile 6.0) to tether with my macbook with no problems. However, the phone went belly up and they sent me a replacement. It had the 6.1 OS. Well, it no longer worked with the Macbook after that. So aggrivating. After much discussion with my cell carrier, Alltel, they let me out of my contract a year and a half early because this is a feature I MUST have with my phone and they claimed to have no OS and no phones which would support it.
SO, now I am on the hunt for a new service provider and a new phone. I have to be able to tether with my Mac. Have to. I was using it on a daily basis before I was sent the new phone and I am beyond annoyed that I suddenly can't do it anymore. The Alltel sup basically told me, "good luck" when I asked if she knew of any providers who DID support the Mac/phone tethering. She said she didn't know of any herself and she's been in the industry to 6 years. Ugh.
So, I know it can be done but I need help finding out how, who and where. If anyone is able to tether with their phone, could you please send me info on who you're using, what phone and how to set it up??? I'm on the hunt and need this info yesterday. : )
Thanks in advance!

AT&T is correct (and donv doesn't seem to understand 'tethering' in this context) - tethering is currently not supported with the iPhone - not via USB nor Bluetooth. The iPhone itself is capable of tethering (either BT or USB) and can be used like that with carriers in other countries. AT&T may decide to support tethering via the iPhone at some point in the future, and will likely charge the same as they do for their other smartphones - an additional $30/month on top of the data plan.
So at the present time, the iPhone is not what you're looking for. But, any carrier with a device that supports tethering on their network will work with the MBP (phones from Nokia, Samsung, etc., BlackBerrys, whatever, from Verizon, AT&T, etc.).
@donv - "Tethering" means using a cell phone as a wireless modem to connect your Mac to the internet. The iPod Touch lacks a cellular radio, so tethering is moot.

Do i need to Choose a network carrier, and witch one should i choose when i live in Norway

Similar Messages

Maybe you are looking for