Do I need to complie a report before I hang it to a system?

hello.
I have made a *.rdf and I want to hang it to my system.my question is do I need to complie it to *.rdx before I registe it?
If need,how can I do that?
thanks.
Peter

It's not necessary, the system will use the rdf when running the report as a concurrent program.

Similar Messages

Do I need to run pc clean before downloading your software

do I need to run pc clean before downloading your software

clean scan report
What do you mean by this? What results are you looking for? List some of the results you would see in the report.
Are you saying you want to check the hd for problems?
Verify a disk
As an alternative, you can verify that the filesystem on the disk is correct. You will not be able to repair the file system.
I suggest that you use disk utility to verify that your startup disk is OK.
Macintosh-HD -> Applications -> Utilities -> Disk Utility
Start up disk utility. On the left pane view, you will see a list of all your disks.
Click on your startup disk.
Click on the First Aid Tab.
Click on verify.
Hopefully your disk will verify. If not, you have to boot from your installation DVD and run Disk Utility from there to attempt to repair your file-system.
Robert

Save Report before last Step

I have a vi that I created that takes a Teststand Report, cleans it up and modifies it in several ways (including changing the filename and saving it on a server). The problem is that I must wait for Teststand to finish the sequence and save the report before I run this vi. I would like to call this vi as the last vi in my sequence and have it do its magic automatically.
I suspect that in order to do so, I must modify the TestStandModel.Seq but I do not have much experience in this. Is their anyway to save the html file that it is building (tempReport) before the last step so I can have my last action modify it. Another possibility might be to complete all steps, build report, then call the vi after I (the user) declines to proceed to
next UUT. BTW, I only ever have a report for one UUT so the html report only represents one run through the sequence.
Thanks for any help.

Hi,
Since you mentioned you don�t have a lot of experience with the process model, I'll explain to you a little how that works and then tell you how you can solve your problem.
The process model (SequentialModel.seq if you are using the sequential process model) is the sequence that handles the execution of your tests. When you select Test UUTs a sequence called Test UUTs is executed. It asks you for the serial number, calls you main sequence, reports the results, generates the report, and continues in a loop until the user declines to continue with the next UUT.
The Test UUTs sequence calls other sequences in the same sequence file. It calls PreUUT Loop before it starts looping several UUTs, it calls PreUUT before testing every UUT, it calls MainSequence, it calls PostUUT after every UUT is tested, and finally, it calls PostUUT Loop when the user declines to execute the next UUT after generating the report.
These sequences are configured as callback sequences. You can override callback sequences in the process model in your own sequence file. Actually, you are already doing that. I mentioned above that the process model call a sequence called Main Sequence. Well in your own sequence file you have a sequence called Main Sequence, so your Main Sequence executes instead of the Main Sequence of the process model (which is empty).
You can do the same with the rest of the callbacks. What you need to do is override the PostUUT Loop callback in your sequence and call your VI in this sequence. This will execute when you decline to go to the next UUT.
What you need to do is go the edit menu in TestStand and select Sequence File callback. Here you have a list of callbacks that you can override. You will see that you are already overriding the MainSequence callback. Select the PostUUTLoop callback and click add. Now your sequence file will have a sequence called PostUUTLoop that will be executed when you decline to go to the next UUT.
Good luck and let me know if this solves your problem.
Marcela.

Help needed while exporting crystal reports to HTML file format using java

Help needed while exporting crystal reports to HTML file format using java api(not using crystalviewer).i want to download the
html file of the report
thanks

the ReportExportFormat class does not have HTML format, it has got to be XML. Export to HTML is available from CR Designer only.
Edited by: Aasavari Bhave on Jan 24, 2012 11:37 AM

Need to develop this report plezzzz help

the requirement says
When a user submits an ID they have to choose who sold the product from the sold by field.This has to be chosen correctly otherwise there will be issues in sales and commission process.I need to develop a report to detect immediately when an Id is created which seems to be suspect.A suspect ID is one in which a salesperson was chosen on a customer who is not assigned to that sales person territory
for example: if danny is in Kathy territory is assigned to a customer in Texas which is Larry territory.
any suggestions will be helpful for me...
Edited by: user13001889 on Jun 6, 2011 4:43 PM
Edited by: user13001889 on Jun 6, 2011 4:44 PM

You ask for help, yet all you give is conceptual data. How do you expect help on writing the report?
Q) What defines "territory"? Is it a flag? Zip code? City?
Here is an answer based on a lot of assumptions:
I would have to assume that territory is defined by something like city, state, or zip code. If so, you could start with this:
When a customer submits an ID, along with who he/she selects as a salesperson -- I assume this is a drop down box to eliminate multiple entries of the same person due to variations in spelling -- thep person's address, city, state and zip are included as well. Let's assume that territory is defined by zip code. With the salesperson's name and the zip of the customer captured, you have the basis for comparison.
Based on the table of all your salespeople and their territory (zip code in my assumption), you can create a report that contains a concatenated field of salesperson||zip code. This will produce a report with all possible combinations of salesperson and territory. This report will be your sub-query.
Now you have your main query based on the customer activity table and you create a concatenated field of salesperson (chosen-by-customer)||zip code (of the customer). You will put a filter on this concatenated column and have it based on the results of another request (your sub-query) with the operand "not equal to/not in."
If any record in the main query does not match an entry from the sub-query, that record will display. It will be a report that contains customers who chose a sales person who doesn't have that territory.
That's how you build your report.

I have forgotten my iPad password and tried to back up and restore my iPad but it says you need to unlock your device before you restore it but that is the whole reason I am trying to restore my iPad. Can anyone help?

I have forgotten my iPad password and tried to back up and restore my iPad but it says you need to unlock your device before you restore it but that is the whole reason I am trying to restore my iPad. Can anyone help?

Forgotten passcode or device disabled after entering incorrect passcode

Need Help XML Publisher Report

Hi Friends
I need to generate a report in xml publisher responsibility .
I have create and designed the RTF file using word , And i have genetared an XML file(template )
I have some doubt please clarify by doubts
In RTF template i have some 4columns
For EXample i Give some column name
Invoice Number , Invoice Line Number ,Tax Type ,Tax Code Name etc....
In my RTF I have done like this
I have created two 2 row and 4column
In the 1st row i have all the 4 column heading
In the 2nd row i have done like this
Developer tab> Design mode > In the legacy tool i have selected text Form field
Once i double click the text form field in the default text i have Given C1 Then in the Add help text button i have given <?C_INVOICE_NUMBER?> like this i have done for alls the columns
My RTF design is completed
Now i need load the XML is it?
In the XMl data query i have placed my sql statement
Here my doubt starts
wether all the column in the RTF should be in the XML sql statement ha?
2)In the top of my RTF i need to add date and page No how to add that ?
Thanks In advance
AT

Hi Friend
Iam saying this is my XML file
<LIST_G_TAX_NAME>
<G_TAX_NAME>
<C_SORT_TAX_NAME>USE TAX</C_SORT_TAX_NAME>
<C_TAX_NAME>Use Tax</C_TAX_NAME>
<C_TAX_RATE>8.25</C_TAX_RATE>
<C_TAX_TYPE>USE</C_TAX_TYPE>
<C_PERIOD_NAME>OCT-11</C_PERIOD_NAME>
<LIST_G_VENDOR>
<G_VENDOR>
<C_SORT_VENDOR_NAME/>
<C_SORT_SITE_CODE/>
<C_VENDOR_ID>851</C_VENDOR_ID>
<C_VENDOR_NAME>ORACLE CORPORATION</C_VENDOR_NAME>
<C_SITE_CODE>CHICAGO</C_SITE_CODE>
<LIST_G_INVOICE>
<G_INVOICE>
<C_INVOICE_DATE>17-OCT-11</C_INVOICE_DATE>
<C_SORT_INVOICE_NUMBER>1308</C_SORT_INVOICE_NUMBER>
<C_INVOICE_ID>350889</C_INVOICE_ID>
<C_INVOICE_NUMBER>1308</C_INVOICE_NUMBER>
<C_INVOICE_LINE_NUMBER>1</C_INVOICE_LINE_NUMBER>
<C_PO_NUMBER>256388</C_PO_NUMBER>
<C_DESCRIPTION>TEST</C_DESCRIPTION>
<C_GL_DATE>17-OCT-11</C_GL_DATE>
<C_INVOICE_LINE_AMOUNT>15</C_INVOICE_LINE_AMOUNT>
<C_CHARGE_ACCOUNT>412.00.6410.7831.1076.1001.00.000.0000</C_CHARGE_ACCOUNT>
<C_LIABILITY_ACCOUNT>412.00.0000.2152.1208.1001.00.000.0000</C_LIABILITY_ACCOUNT>
<C_BATCH_NAME>101711</C_BATCH_NAME>
<C_SITE_CODE2>CHICAGO</C_SITE_CODE2>
<C_INVOICE_AMOUNT>15</C_INVOICE_AMOUNT>
<LIST_G_DIST>
<G_DIST>
<C_INVOICE_TAX_ID>10061</C_INVOICE_TAX_ID>
<C_LINE_TYPE>ITEM</C_LINE_TYPE>
</G_DIST>
</LIST_G_DIST>
<C_TAXABLE_AMOUNT>15</C_TAXABLE_AMOUNT>
<C_TAX_AMOUNT>1.24</C_TAX_AMOUNT>
<C_INVOICE_AMOUNT_DISP> 15.00 </C_INVOICE_AMOUNT_DISP>
<C_TAXABLE_AMOUNT_DISP> 15.00 </C_TAXABLE_AMOUNT_DISP>
<C_TAX_AMOUNT_DISP> 1.24 </C_TAX_AMOUNT_DISP>
</G_INVOICE>
</LIST_G_INVOICE>
<C_INVOICE_SITE_SUM>124.9</C_INVOICE_SITE_SUM>
<C_INVOICE_SITE_SUM_DISP> 124.90 </C_INVOICE_SITE_SUM_DISP>
<C_TAX_SITE_SUM>5.4</C_TAX_SITE_SUM>
<C_TAX_SITE_SUM_DISP> 5.40 </C_TAX_SITE_SUM_DISP>
<C_TAXABLE_SITE_SUM>65.66</C_TAXABLE_SITE_SUM>
<C_TAXABLE_SITE_SUM_DISP> 65.66 </C_TAXABLE_SITE_SUM_DISP>
</G_VENDOR>
</LIST_G_VENDOR>
<C_OLD_VENDOR_ID>0</C_OLD_VENDOR_ID>
<C_INVOICE_SUM>124.9</C_INVOICE_SUM>
<C_INVOICE_SUM_DISP> 124.90 </C_INVOICE_SUM_DISP>
<C_TAX_SUM>5.4</C_TAX_SUM>
<C_TAX_SUM_DISP> 5.40 </C_TAX_SUM_DISP>
<C_TAXABLE_SUM>65.66</C_TAXABLE_SUM>
<C_TAXABLE_SUM_DISP> 65.66 </C_TAXABLE_SUM_DISP>
</G_TAX_NAME>
</LIST_G_TAX_NAME>
And if i need all the column to be displayed in my report
1)Invoice Number
2)Invoice Line Number
3)Tax Type
4)Tax Code Name
5)Tax Rate Percent
6)Supplier Name
7)Description
8)Gl Date
9)Invoive Line Amount
10)Taxable Line Amount
11)Tax Liability
12)Po Number
13)Charge Account
14)Liability Account
Which tag do i need to use fro grouping
For ex
Instead of this <?for-each:G_TAX_NAME?> <?end for-each?>
which one i need to use
Please help
Thanks
AT

I need to display a Report which contain -- del QTY and INV QTY in one

Hi ALL,
I need to display a Report which contain
<b>Customer , Material , Order No, Delivery No, Billing No , Order Qty , Dev Qty, Bill Qty , Invoiced Qty and There Values in One Line .</b>
How can I Display, When I am executing the report against the Delivery Number Bill Qty and Invoiced Qty is showing Hash ( # ).
Do I need to right any Routines for this, if I am correct, where I have to write that code and what is the code ,
What are the Consolidation routines ?????
I am working on BI 7.
Regards ,
Shaik
Message was edited by:
shaik

Frst check in backend, which all cubes have got data for each of three..
Corresponding you can go ahead with Multi/Infoset..
Look for reference no in all three cubes and pick one order and track tht by reference no in all cubes,
Hope it helps..
Thanks for points assigned

I Need to Create a report for batch jobs Based on Subject Area.

Hi SAP Guru's,
I need to create a report , that it must show the status of batch jobs Completion Times based on Subject area(SD,MM,FI).
Please help me in this issue ASAP.
Thanks in Advance.
Krishna.

You may need to activate some additional business content if not already installed but there are a lot BI statistics you can report on. Have a look at this:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/46/f9bd5b0d40537de10000000a1553f6/frameset.htm

Call CR XI from C++ routine, need to run the report without display and send the resulting report to the printer

<table border="0" cellspacing="0" cellpadding="0" width="100%" height="100%" id="HB_Mail_Container"><tbody><tr width="100%" height="100%"></tr><tr><td height="1" style="font-size: 1pt"></td></tr></tbody></table><blockquote><table border="0" cellspacing="0" cellpadding="0" width="100%" height="100%" id="HB_Mail_Container"><tbody><tr width="100%" height="100%"><td id="HB_Focus_Element" width="100%" height="250" valign="top"><p>I initiate a CR XI from a C++ routine using ShellExecute command, the report file is opened and the C++ program continues to execute, this is working fine, now I need the following two things:</p><p>1. When the report is invoked I would like it to run and print the result either to a printer or to a file.</p><p>2. I need to send the report parameters since it will not prompt for it if it runs automatically.</p><p>Thanks in advance for your help.</p></td></tr><tr></tr></tbody></table><blockquote><table border="0" cellspacing="0" cellpadding="0" width="100%" height="100%" id="HB_Mail_Container"><tbody><tr width="100%" height="100%"><td id="HB_Focus_Element" width="100%" height="250" valign="top"><p> </p></td></tr></tbody></table></blockquote></blockquote>

Please re-post if this is still an issue to the Legacy Application Development SDKs Forum or purchase a case and have a dedicated support engineer work with you directly

Need to print a report

Hello guys,
I have button in my form, which displays
a report, I need to print the report,
once the the button the pressed.
Are there any ready made functions !!!
A.Kishore
null

Kishore,
Do you want the report to show up and then
the browser print window to show up?
If so, then in the unstructured template, call the window.print() method using the onLoad event for the body tag. When the report loads in the browser, you will get the browser print window (in Netscape). In IE, the print starts automatically.

I have forgotten my password for iPod Touch 4G and it is now disabled. I tried connecting to iTunes but i haven't synced before and i need to enter the password before i can back it up so i can restore it. I don't want to lose pictures so please help!

I have forgotten my password for iPod Touch 4G and it is now disabled. I tried connecting to iTunes but i haven't synced before and i need to enter the password before i can back it up so i can restore it. I don't want to lose pictures so please HELP!

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased. That is how it works
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

I tried to update my iPhone 4S but I nowkeep getting an error saying I need to restore my phone before it can be used because it's in recovery mode! But if I restore it I lose all my media and data and I don't want to do that! Is there anything I can do??

I tried to update my iPhone 4S but I now keep getting an error saying I need to restore my phone before it can be used because it's in recovery mode! But if I restore it I lose all my media and data and I don't want to do that! Is there anything I can do?? Somone please help, i'm freaking out over here!

Anything that was on the phone is already gone. You have no choice but to restore. If you were backing up and syncing the phone on a regular basis, you should be able to restore your backup with minimal data loss.

Old computer died and I am trying to install Illustrator CS5 on new computer. Last version I had before CS5 was/is Illustrator 10, which has been installed in new computer. CS5 install says I need CS2,3, or 4 before installing 5, but old computer went dir

Old computer died and I am trying to install Illustrator CS5 on new computer.
Last version I had before CS5 was/is Illustrator 10,which has been installed on new computer.
CS5 install says I need CS2,3 or 4 before installing 5, but old computer went directly from 10 to CS5.
How can I repeat this 10 to CS5 install?

It does not seem likely that CS6 was upgraded from version 10. You might want to check your purchase history in your Adobe account to see if there is some missing link in the chain of purchases you made.
You can always try contacting Adobe support thru chat to see if they can find information or otherwise assist you in this matter.
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

I'm using 10.6.8 but would like to use iCloud so need to upgrade to 10.7.4 but need to install 10.7 before I can upgrade to 10.7.4. Where can I find 10.7.0?

I'm using 10.6.8 but would like to use iCloud so need to upgrade to 10.7.4 but need to install 10.7 before I can upgrade to 10.7.4. Where can I find 10.7.0?

Welcome to the Apple Support Communities
The latest OS X version is OS X 10.8.3, so first check that you can use OS X Mountain Lion. First, check that your Mac supports Mountain Lion > http://www.apple.com/osx/specs If it's compatible, open the App Store and purchase Mountain Lion. While it's being downloaded, make a backup of your files and check that your apps are compatible > http://www.roaringapps.com
When the download finishes, the OS X installer will appear, so follow the steps. After upgrading, you will have 10.8.3.
If your Mac isn't compatible with Mountain Lion, check that you can run Lion > http://support.apple.com/kb/HT4949 If you can run OS X Lion, call Apple to purchase it > http://support.apple.com/kb/HE57 After upgrading to Lion, you will have 10.7.5.
To set up iCloud after upgrading, open System Preferences > iCloud. Read > http://www.apple.com/icloud/setup

Do I need to complie a report before I hang it to a system?

Similar Messages

Maybe you are looking for