Do I Need to Deactivate/Reactivate DW8 after XP Pro Reinstall?

Hi --
My machine is acting hinky enough that I think I've reached
the point where
I have to reinstall XP Pro. Before I do, though, I wonder if
I'll need to
deactivate then reactivate DW8 (and FW8). I checked the Adobe
site but all
I could find on the topic is about CS3 and a "low-level
reformat"
Also, does anyone know how to deactivate the software?
Thanks,
John

I would. You only need to do it on one application.
Better safe than sorry.

Similar Messages

  • Laptop Crashed, Need to Deactivate/Reactivate - Adobe CS3

    Recently I ran into a hard drive malfunction, and before I could deactivate the whole of Adobe CS3, my laptop crashed, and I had to swap out the hard drive. Needless to say, this is proving to be tedious, because I have no way to deactivate it now due to the new hard drive in my laptop. Is it possible to deactivate one of the licenses associated with Adobe CS3 so I can reactivate it on my laptop? It's the same laptop just a new hard drive. Specs are below, if necessary.
    Brand: HP
    Model: Pavilion g6z-2200 CTO Notebook
    Hard Drive: 500 gB (Replaced July 18, 2014 with new model)
    Operating System: Windows 8, 64-bit
    RAM: 4 gB
    Processor: AMD A4-4300 APU 2.50 GHz

    Contact support by web chat.
    Mylenium

  • Need to reestablish airport admin after wipe and reinstall of os

    bummer - had to do a hard wipe/reformat/reinstall of my os and all applications. we didn't lose the network connection to the other computers in the house during the reinstall, but now i don't have admin access to the airport. what can i do to reestablish admin access on my computer?

    Hello stephaniern. Welcome to the Apple Discussions!
    You can download the AirPort Utility for Windows from here: AirPort Utility 5.4.2 for Windows

  • Hello, I need to deactivate my Adobe product that is installed on a computer that "Broke" and reinstall it on my new laptop.  Redownload and reactivate it.??

    Hello, I bought and installed Adobe Acrobat Pro on a laptop.  Since windows crashed and as it was a single user license, I need to deactivate it and redownload it onto my new laptop.
    Any pointers?
    Thanks,

    A single user license provides for having it installed and activated on two machines.
    If you are unable to deactivate on the broken machine then you need to contact Adobe Support thru chat and ask them to reset your activations.  If you do this before installing and activating on the new machine you can save yourself the problem of reactivating it.
    For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )
    If you originally purchased a download thru Adobe then there might be a download link in your account online.  There are other options as well.
    Download and Installation Help -
    https://helpx.adobe.com/download-install.html

  • Migrating to NEW Mac-Deauthorize/Deactivate Before or After?

    Hello all.
    In the next few days *I am preparing to set up my new iMac and migrating* all the user's data, files, software and applications over.
    _Here are some queries:_
    *1. iTunes Account/Computer - De-authorize BEFORE or AFTER the migration?*
    *2. Adobe Software - Deactivate before or after?*
    (We know that Adobe CS software has limited licenses to run on limited number of computers)
    *3. Microsoft Office 2008 - Deactivate before or after? Is there such a "mode"?*
    I want to make sure I can still run the same license on the new iMac.
    Thanks and cheers

    All software that's activated should be deactivated before the migration. Because it's stuff that happens during migration that can mess up your registrations, doing it after is often too late. (After all, if they survived the migration, there would be no need to deactivate, just start working.)
    Microsoft Office 2011 has activation, but no previous versions do. Your Office 2008 has no activation, but if something gets messed up you might need to re-register, I'm not sure...it's a good idea to know where your Product Key is just in case you have to reinstall.

  • Is it required to deactivate an adobe after effect before formatting a computer??

    Is it required to deactivate an adobe after effect before formatting a computer??
    because my adobe after effect is licence version & the windows suddenly cress & i need to format pc ……so what i do…..in this case???

    Well, there's also a Creative Suite forum.  Personally I'm not familiar with After Effects at all.
    In general however, if you are going to install the application on the very same computer and hard drive, you do not have to deactivate first.
    However, if you end up with a different CPU or another hard drive, then yes, you should deactivate it.
    Just keep in mind that you only get a limited number of re-activations, so don't waste them unnecessarily.
    Contact Adobe customer service if in doubt as to the number of activations you have left.
    Also note that I have no experience with Creative Suites on a subscription basis, so I'm talking from the point of view of my perpetual licenses to Adobe applications.

  • Deactivate, reactivate PSCC and LR

    I have a cc subscription and have downloaded Pshop CC and LR to 2 machines. One of them, laptop, has died. Bought new, downloaded Adobe CC cloud desktop and downloaded PSCC and LR. It now say I must deactivate.. ok, but the only choice is  both.. I only need to deactivate one, not both, to get the newly installed PSCC and LR to run. Is there a way to deactivate only one, or if only both, how do I reactivate them on my desktop machine?
    One is win7, the new if it matters is win 8.  Help please.  Bob

    No you deactivate both then re-activate on both machines. It is a lot more convienent than calling technical support. Activation takes place without human intervention on Adobe's part. No more phone calls.

  • Need to deactivate the software on a compouter that no longer works

    need to deactivate the software that is on a computer that no longer works how can i do that?

    It can be done by contacting web chat. Links on this file:
    Adobe ID, sign in, and account help

  • My daughter's ipod nano shows up in "devices" when I plug it in...but it disappears.  Right away it says it needs to update, but then after extracting the files it comes back and says that it can't be updated because it can't be unmounted.  help?!

    My daughter's ipod nano shows up in "devices" when I plug it in...but it disappears.  Right away it says it needs to update, but then after extracting the files it comes back and says that it can't be updated because it can't be unmounted.  help?!

    When in DFU mode and connected to the computer iTunes does not say anything but iTunes will see the iPod and you can restore the iPod via iTunes. When in recovery mode and you connect, iTunes will say it found an iPod in recovery mode.

  • All the time I plug my iPod Shuffle to my iTunes it says it needs to be restore and after I restored it and add music it only skips song after song without playing one completely. What should I do?

    All the time plug my iPod Shuffle to my iTunes it says it needs to be restore, and after I restored it and add music, it skips song after song without playing one completely. What should I do?

    Hello there, san blasted.
    The following page links to the iPod Troubleshooting Assistants. Feel free to review the recommendations for your particular iPod:
    Apple - Support - iPod Troubleshooting Assistants
    http://www.apple.com/support/ipod/five_rs/
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Need to deactivate two computers associated with my PSE 7 serial number.

    Hi, I've installed PSE 7 on a new computer but my serial number is not working.
    I assume the reason is I need to deactivate the two computers associated with the serial number from previous installations.
    I have contacted the chat/help desk and was told to come here for further assistance. I'm currently stuck in a trial period.
    Thanks in advance for your help.

    "How can I fix this? "
    deauthorize all, then authorize the active computers.
    " Do I need to deauthorize all of my computers and then re-authorize the active ones?  "
    Yes.
    " How will this affect my iTunes media, if at all? "
    It will not.
      Is there a way to see a list of the current five computers authorized with my Apple id?"
    No.

  • I have just opened my brand new Macbook Pro and I'm a first time mac user. I have tried to download flash to enable me to watch you tube clips, but on trying to download it, it says I need to close Safari but after doing so, it still won't respond.

    I have just opened my brand new Macbook Pro and I'm a first time mac user. I have tried to download flash to enable me to watch youtube clips, but on trying to download it, it says I need to close Safari but after doing so, it still won't respond. Any tips? Help?

    Actually you need to quit Safari which is different from closing.  With Safari open go the menu bar for Safari/Quit Safari. 
    Mac 101:  Get Started Using A Mac 

  • HT1430 my iphone 4 turn off after appearing message "temprature high, need to be cool down after than doesn't becoming turn on"

    my iphone 4 turn off after appearing message 'temprature high, need to be cool down' after that does not getting turn on by anyhow.

    Hello vijaypatel,
    Thanks for the question. The following article outlines the temperature warning that you experienced:
    iPhone, iPad, and iPod touch (4th generation): Keeping device within acceptable operating temperatures
    http://support.apple.com/kb/HT2101
    If the iPhone is no longer powering on, we will need to isolate this issue to determine if it is hardware related.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    - Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    - Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion.
    Learn about LCIs and corrosion.
    - Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    - After at least 15 minutes, if:
                   - The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
                   - The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
                   - Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    - If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
                   - If the display turns on, go to step 4.
                   - If the display remains black, go to next step.
    - Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to
    restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    - If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thanks,
    Matt M.

  • Need badi which triggers immediately after saving the vendor master data

    Hi all.
        I need a badi which triggers after vendor master (xk02) is changed . The badi should trigger after the data base commit ( i.e after all the changes have been stored in data base tables). Pls let me know
    Thans in advance.

    try these:
    EXIT_SAPLV45T_001       V45T0001     Customer exits text determination
    EXIT_SAPMF02D_001     SAPMF02D     User exits: Customer master data
    EXIT_SAPMF02K_001     SAPMF02K     User exits: Vendor master data
    EXIT_SAPMV45A_002     V45A0002     Predefine sold-to party in sales document
    EXIT_SAPMV45A_003     V45A0003     Collector for customer function modulpool MV45A
    EXIT_SAPMV45A_004     V45A0003     Collector for customer function modulpool MV45A
    BADI's:
    CUSTOMER_ADD_DATA     CUSTOMER_ADD_DATA     Additional Data at Customers
    CUSTOMER_ADD_DATA_CS     CUSTOMER_ADD_DATA_CS     Additional Data at Customers (Subscreen Container 4000)
    VENDOR_ADD_DATA     VENDOR_ADD_DATA     Additional Vendor Data
    VENDOR_ADD_DATA_CS     VENDOR_ADD_DATA_CS     Additional Data for Vendors (Subscreen 4000)

  • Windows crashed, I need to deactivate Acrobat 8 to reinstall, have serial number

    Windows crashed, I need to deactivate Acrobat 8 to reinstall, have serial number

    You need to call support by phone. Nothing anyone here can do.
    Mylenium

Maybe you are looking for