Do I need to enable something in MAX to turn on Iso Power for the outputs of a UMI?

Hello
I've been trying to set up a UMI-7772 to control some servo drives. I have V, C, Viso and Ciso inputs connected to a 24V power supply. When turned on, both the V and Viso lights turn on green. However, I cannot measure any voltage difference between the Iso Power and Iso Common pins on the Dsub outputs. Is there something in MAX I need to enable to get the UMI to turn on?
Thanks
Mike

Hi Mike,
there is no switching circuitry on the UMI, that could disable the Iso Power outputs and there is nothing you need to configure in MAX. If you can't measure a voltage between Iso Power and Iso Common pins on the Dsub outputs, the UMI might be defective (e. g. blown fuse). Please contact your local NI branch for repair options.
Thanks and kind regards,
Jochen

Similar Messages

Pdf file is too big (7MB). Need a pdf file with max size 4MB. How to minimize the size of a pdf file?

pdf file is too big (7MB). Need a pdf file with max size 4MB. How to minimize the size of a pdf file?

The other alternative is the Save As Other>Reduce File Size. The PDF Optimizer gives you more control. You might also use the audit feature in the PDF Optimizer to see where the size problem is coming from. You might find that in the WORD file you can select and image and then go to the FORMAT (pictures) menu and select compress for all of the bitmaps in the file. That will typically use 150 dpi by default that is adequate for most needs.

Every time i need to print something, I've to turn the print off and on again, any solutions?

Ok, I have a HP D110, installed wirelessly on a laptop mac OS X, everything works well, besides every time I need to print something, I've to turn the printer off and on to start print, like on a gap of 5 min. between jobs I have to do it, when it suppose to wake up as soon as you send a job to print I guess. I don't wanna have to go where the printer is all the time I need to print some, otherwise I'd use the cable connection, if anyone have solutions or experience the same prob, I'm looking for answers to solve this.
Thank you.
Alfred!

Hi Alfred,
Please check for any available firmware update:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02836005&cc=us&dlc=en&lc=en&product=4023246&tmp...
Make sure to install the latest firmware and check for any change.
If the same behavior persist, please let me know what router you are using in order to better understand any possible cause.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Help! I'm in UK and need to recharge but when I plug in (using a power converter) the square white batter pack is buzzing - what does it mean????

Help! I'm in UK and need to recharge but when I plug in (using a power converter) the square white unit is buzzing - what does it mean? I am using a power adaptor that works for other items - shaver, phone etc. and they don't buzz - it's coming from the square white unit before it's connected to the computer so I don't want to then connect my mac incase it means there's something wrong. Getting desperate as I need to recharge!! Thanks for any help!

Hi
If you're using a converter that changes the voltage from the UK ~230V to say 120V, rather than just a converter to different outlet/plug/socket sizes - then that's likely the problem.
All the Apple power units I've seen are rated from 100V to 240V & do not require any sort of voltage converter, just something to let you plug it into a UK outlet (or an Apple cable/connector set). Many cheap voltage converters can cause buzzing as you've described.
Many supermarkets & hardware/general stores will sell the right 'adaptor' for a couple of £UK - I'd find one rather than continue with the buzzing.

I forgot my security questions and i want to buy something but i cant because it keeps asking for the questions what do i do?

i forgot my security questions and i want to buy something but i cant because it keeps asking for the questions what do i do?

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(100018)

Why can't I get some buttons to work on websites? Need to enable something?

Recently, I am not able to use certain portions of 3 websites that I used to be able to use. I can get to the pages, and some buttons/links work within pages, but when I try to click on some buttons on some pages, nothing happens at all. The computer is not frozen, I can do other things on the page. Example #1 - I was trying to access my photo albums at Snapfish.com but I cannot access my albums, or select albums to which I will download photos. #2. I was trying to create a gmail e-mail address. When I tried I had a message about enabling something. Didn't know what it meant or how to do that. Any ideas on what to adjust on my computer so that I can do what I used to be able to do?
PowerBook G4 Titanium Mac OS X (10.2.x) 768 MB Ram

Which browser are you using? Do you have Enable Java checked in it's preferences? When you get a message it's a good idea to write down exactly what it says rather than dismiss it and wonder later what it said about something.

I have 8 charges on my debit card within a matter of 30 minutes for the same amount. Contacted my bank but i need a letter from itunes. How can i get this for the bank to reverse charges since it's debit card?

I have 8 charges on my debit card within a matter of 30 minutes for the same amount. I notified my bank but the bank is asking for itunes to send them a fax. How can i get this?

If possible, I suggest changing to a credit card.
1) There is a max $50 in stolen dollars.
2) It is easy to dispute a charge. You call the credit card company. Complain. They call the retailer & refund you the money.
Robert

What equipment will I need to enable me to charge my blackberry curve in Israel for a year?

Hello, I'm going to Israel for a year and I need some sort of converter or something like that in order to charge my blackberry. I am completely ignorant in this department and so I need some information. Please be thorough in your response. Please help, thank you so much and take care.

What kind of format will you be working with?
HD? HDV????? DV? Beta?
I'd buy the biggest baddest mac you can afford - 2 gigs memory is fine unless you can swing 4. Fill the 4 bays with at least 500gig drives (but....)
The rest will depend on what format you will be using.
CaptM

Dishanywhere says I need to do something with a plug in on my browser for it to work on my desktop how do I do that?

I am suppose to be able to watch tv anywhere and it will not let me watch tv on my desktop. Dish anywhere downloads but it keeps telling me something about my plugins on my browser and I can't resolve this issue. could you please let me know what I need to do to get this on my desktop so I can watch tv in my bedroom. I have had Dish network come out and they can't seem to resolve it or find my plugins on Mozilla firefox.

Here is a list of the plugins Firefox has. Is it one of these?
MindSpark Toolbar Platform Plugin Stub for 32-bit Windows
Best Buy pc app Detector Plug-in
CANON iMAGE GATEWAY Album Plugin Utility Module for IJ
NPWLPG

HT4913 Hello, Have I tunes, need to reset factory settings since I do not have password for the iPad? Will not open devices on itunes

Hello, never used this before but need your help please. When I click devices it does not open. I am using toshiba lap top, vista. Thank you.

Hello,
Try changing the view on iTunes 11 to classic view. To enable the menu bar, press Control-B. To enable the Side Bar, press Control-S. Test to see if you can access the device.
iTunes: Turning on iTunes menus in Windows 8 and 7
http://support.apple.com/kb/HT5610
iTunes 11: Frequently used features
http://support.apple.com/kb/HT5649
If the issue persists and iTunes becomes unresponsive when attempting to access your device, try the steps in the article below.
iTunes: May become unresponsive when connecting iPhone, iPad, or iPod touch
http://support.apple.com/kb/TS3219
Cheers,
Jason H.

I need a mac, but I dont know if I should wait for the new OS X 'leopard'

I dont have a mac yet, but I was looking at the new OS and the Time machine feature really caught my attention. Being a design student this could be the feature ive been waiting for. I just dont know I f I should wait for 'leopard' to be released or not. I really nee the computer now, but I dont want to pay extra to upgrade to 'leopard' later on. The web-site doesnt specify when It will be released, I was wondering If anyone knew If its a couple of weeks or months?
This would help me make an easier decision.
If anyone could give me some insight, that would be great.
thanks.
hp pavillion a250n Windows XP

iMacs that shipped with
Tiger still boot Jaguar
Bollocks! While they'll boot specifically compiled
versions of Darwin they will not boot Jaguar from a
boxed retail version or any version of Jaguar that
came with a Mac.
the iMac G5 will simply not boot any version of
Jaguar that came from Apple retail.
Bollocks! is right , you're absolutely wrong. My iMac which came with Tiger still boots retail Panther quire easily.
The tiger I was referring to, on my MBP is the Darwin 10.3 version recompllied to suport Intel. Yes i agrre that a newer Intel based system won't boot an older PPC based DVD, I should hope not. But thats because of PPC vs Intel NOT some supposed policy from Mac
I'm not sure where you get anything to support your statements since from the time That Intel based macs shipped with Panther there was no retail version of Tiger available for Intel, since then there has been no release of a new OS X so where are you even geting your so called "facts" from? Prior to that we were talking about PPC based Macs which most definitely ran prior version, in fact my old Powerbook which shipped with Tiger runs Jaguar and 10.2 and 10.1 as well.
While not officially noted, not that I'm aware of at
least, this has been Apple policy for quite some
time. While sure, you can get a Mac to use many
things it wasn't "meant" to although that doesn't
mean one should.
That's just plain wrong on so many levels..
So where are your use cases to support your made up policy?
{i] If you look back at each successive Mac OS X upgrade
from Jaguar and look at the systems that spanned the
release of the newer OS. In each case, even though
the hardware was exactly the same, those systems that
shipped with the newer OS failed to boot and install
from the discs of the exact same system that had the
older version OS. Yes there were a few that did
although once Apple manufacturing caught up with
itself, which was normally a week or two, they
didn't.{/i]
Just wrong again, Yes maybe if the hardware has changed to support some new device in the new Mac. The only way that would be true as if you factored in the change from PPC to x86 architecture. I have several machines which run retail versions of OSx back to 10.2, some even 10.1 on boxes that shpiped with Jaguar or even Tiger. And there are no firmware blocks that limit that. That is what you claim
Give us some examples of this "supposedly unstated policy" you seem to think is in effect.
INo… because you're not correct through simply not
referring to Apple retail versions of Mac OS X and
moreso, the implications of such advice infers that
one has full support for older OSs where they do
not
Bottom line… if you want a system that runs Mac OS X
Tiger then buy one that comes with it..
First of all I never said that one has full suport for all old versions of OSX. I said there is NO policy in Firmware that prohibits newer OSX based machines from running older versions of OSX. But I think you're just basically overlooking the fact that in the cases you cite there were probably actual hardware progressions that made older retail version not see newer hardware. It wasn't some mysterious Firmware blocking as you claim. It was pure hardware progression.
By the way, what if someone follows your advice,
waits for Leopard and finds they need Tiger and can't
install it? What are you going to do beyond shrug you
shoulders and say "not your problem"?
Uhhh, if you read my post, I never said to do what you seem to think I said. I merely asked YOU to cite an example of this "policy" and firmware blocking, which you haven't done yet BTW, cause I think you're wrong and I don't think its a policy to block, as you suggest, in firmware, a previous OS version for every new hadware version shipped with a new software version.
When Leopard ships on a C2D MBP you will not have to worry about that MBP not running retail Tiger. It certainly won't have some mysterious firmware block on booting Tiger after some mysterious two week period as you claim. Now if there is a NEWER revision with newer hardware that ships with Leopard there may be an issue with a currently available version of Tiger because it doesn't support the new hardware. It won't be , as you claim, some unstated policy manifested in firmware that prevents Tiger from installing.
So lets just end this here and now cause its a waste of people's time and my posts weren't claiming that if you need tiger don't buy a machine with Leopard on it, as you seem to think I was saying. What I said and stand by is this. There is no unwritten or written policy that has Apple blocking previous versions of its OS X in new hardware shipped with new software via firmware. Unless tha actual hardware contains devices that the prior version of OSX was unaware of. That's all I was pointing out. Somehow you stretched this into something completely different.

Can you enable both Windows Based Authentication and Forms Based Authenication for the same web application?

Hello Community
    In WS2012 and SharePoint 2013 Server is it possible when creating a
web application to enable both Windows Based Authentication/Negotiate
(Kerberos) and enable Forms Based Authentication or does the web application
use either one or the other?
    Thank you
    Shabeaut

Yes , you can use dual authentication on same web application. You can use same web application , at OOB login page you will have option to use windows or form login.
Or you can extend your web application to a new web app and configure extended web application to use Form Based Authentication(Note extended web application will also show same content database , so the content will same only url will be different)
http://blogs.technet.com/b/ptsblog/archive/2013/09/20/configuring-sharepoint-2013-forms-based-authentication-with-sqlmembershipprovider.aspx
http://gj80blogtech.blogspot.in/2013/11/forms-based-authentication-fba-in.html
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

Need the reason for the output i am getting

Hi, here is a code that is slightly tricky . i hope you answer my question
class q4
     public static void main(String[] args)
          StringBuffer a = new StringBuffer("A");
          StringBuffer b = new StringBuffer("B");
          operate(a,b);
          System.out.println(a + "," + b); // AB,B is the answer
     static void operate(StringBuffer x,StringBuffer y)
          x.append(y);
          y = x ;
          System.out.println("in operate method " + y); // prints AB
}Why AB,B and why not AB,AB ??
Waiting and thanking for your reply ,
samjoshi26

In main(), a points to a StringBuffer object, let's call it "alpha", and b points to a StringBuffer object "beta".
It passes these as arguments to operate().
In operate(), x points to alpha and y points to beta.
Then beta is appended onto alpha, so alpha is "AB" and beta is still "B".
Then y is made to point to alpha.
Then the method ends.
But the manipulation of x and y has nothing to do with main(). x and y are local variables in operate(). So in main(), a still points to alpha and b still points to beta.

I need to secure a pdf so it cannot be edited, except for the first page. Is this possible?

Can you secure all but one page of a pdf? I would like the first page to be able to be edited, but the rest of the document to be protected from editing, is this possible? If so, how?
c

What do you mean by editing PDF? If you have a PDF form and want to make some form fields, in your case pages other than the first page, non-editable, you can lock the form fields on all pages other than first. You can write a JavaScript that does that, include it in the original PDF form and activate it at some point in time (like when a certain button is clicked, or certain form field gets focus). If you mean other ways of editing, like changing text on a page, you cannot protect only part of the document from that.

I need some help, everytime I open an application it asks me for the keycha

keychain password, what can I do to store my keychain for password for all applications.

Hi Alex,
This usually happens when the password for the keychain is not the same as your user account. Have you [tried changing it via Keychain Access|http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh463.html] (or tried repairing the keychain via the same application)?

Do I need to enable something in MAX to turn on Iso Power for the outputs of a UMI?

Similar Messages

Maybe you are looking for