Do I need to get a different docking system to fit the Iphone 5?
Do I need to get a different docking system for the iphone 5 than what I currently have?
The question is, what do you currently have? If a system for the older 30-pin dock connector, you will need a converter for the 30-pin dock to Lighning connector. See the Apple store for the adapter.
Such as: http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter?fnode=3c
Similar Messages
-
I need some help.... I Have the iPhone 4S and downloaded the new software (6.0) and everything seems great so far except when I try to open a link in safari from a different app (ie..messages, Facebook, ect..) it glitches and won't load. The blue loading bar will just jump back and forth and the page will not load properly if at all....
It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.) -
my hard drive crashed on my MacBook Pro crashed and I need to get my CS5 up and running on the new hard drive. I copied what I could onto an external hard drive but when I drag and drop I get directions to uninstall but the uninstall folder I have does says it is an alias that is no longer present. I get error 6. I would like to get my software up and running on the laptop again please
If you subscribed to iTunes match the songs are kept in icloud. If you didn't but you did save the actual iTunes library folder which should include the music, video, etc. you should be able to just drag this file back to your machine in the same place and when you open iTunes it will give you a chance to identify the iTunes library folder.
You can test this to find out if you saved the media files or not and don't need to attach your nano to do it.
You are correct that once you connect the nano it will clear the existing files from it and sync it with the new iTunes library.
If you don't have the media files i'm not sure if/how to get them back on a windows ipod. I have everything backed up regularly because of the horror stories I have seen & heard. -
My computer crashed and I have to get my data from my old drive to another computer, to ensure I get all my data what do I need to get. I have and ipad and an iphone. I need to get apps, contacts, pictures, etc. Is there a way to do this? It was a vista pc and the new is win 7. I can grab the backup files, and music, but what about my apps? I do not want to sync on the new pc since the apps aren't there. Were are the app files located in itunes? Can I just copy them to the new computer?
You can transfer itunes purchases: File>Devices>Transfer Purchases
The iphone is not a storage/backup device. The sync is one way - computer to iphone. The exception is itunes purchases.
It has always been very basic to always maintain a backup copy of your computer. Use your backup copy to put everything back. -
If I have my ITunes up to version 10.6.3, what do I need to get to version 10.7 for my new Iphone 5 to be able to work on my macbook to add my songs to my phone
Hi Jeff,
Apple ID (required for some features)
Internet access5
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.7 or later (free download from www.itunes.com/download)
http://www.apple.com/iphone/specs.html
Snow Leopard/10.6.x Requirements...
General requirements
* Mac computer with an Intel processor
* 1GB of memory (I say 4GB at least, more if you can afford it)
* 5GB of available disk space (I say 30GB at least)
* DVD drive for installation
* Some features require a compatible Internet service provider; fees may apply.
* Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It's been pulled from the online store & Apple Stores, so you have to call Apple to buy it, last I heard.
Call Apple Sales...in the US: 1-800-MY-APPLE. Or Support... 1-800-275-2273
Other countries...
http://support.apple.com/kb/HE57 -
Hello I hope somebody can help. I have an ipod classic 6th generation which has a 160gb MK1626GCB HDD in it. This drive has failed so I bought a new one. I don't know how I've managed it but I've ended up with a 160gb MK1634GAL. The connectors on the hdds are different on the hdd end but look the same on the mb end. Can I just get a different ribbon so it fits? Ive looked for one and have found a couple of different ones and the seem to be specific to the ipod although I cannot find one specific for the 160g. Can anyone shed some light onto this?
Your computer is called an iMac.
Did you turn proxies on? If so, you should turn them off. -
itunes sync takes all music off iphone 4s onto pc. how do i get music from itunes on pc to the iphone 4s?
Under your device in iTunes, you need to make sure you have "Sync Music" enabled on iTunes under the music tab to tell iTunes to move the music it has over to your iPhone.
Take a look at this article for information on how to sync your iPhone using iTunes.
http://support.apple.com/kb/HT1386 -
I went to sync my iPhone 4 as usual with my iTunes account on my MacBook Pro and when it got to the end stage of the sync where it syncs with iPhoto, I get a pop up message that says, "The iPhone cannot be synced. The required file cannot be found." What do I do?
Hi. I am having the same problem.
I have updated iPhone software and carrier settings, OSX Lion on the comp and in step 4 of 4 during photo sync about half way through, the error message comes up and now my pics are gone from the phone. I did empty the cache and the problem still persisted. I changed cables, I restored the phone and synced from the back up and even restored and created a new phone identity, still no love.
I am puzzeled, any suggestions? -
I had a very larger OTHER folder in itunes, Went and ask Apple rep at shop today and he advised to do a restore but 1st back..
I back up and then did a manual back to make sure it was done.
Then i started iphone restore, all done and now to restore back up.
But i get a error,
""Itunes could not restore the Iphone on marks Moblie Because the back up was corrupt or not compatible with the iphone that is being restored.""
My pc runs XP and software is up to date, checked this before back up.
Disable Anti Virus
Checked itunes is up to date. Ok
Unplug all leeds at back of my pc, except key board & mouse/monitor.
Unpluged Modem.
Did restore again but get same error message,
help please.Try this -
http://support.apple.com/kb/TS2529
Best of Luck -
Is there any way to match the dock and USB to the iphone it goes with?
We have several iphones in our household. An iphone 3, two iphone 3S and two iphone 4S. Our teenage daughter keeps snatching everyone's charger and then claims innocence. Funny thing, everyone's chargers are all gone and she's the only one who has one left. We've never caught her red-handed, but we know without a doubt she's the little thief in the house. Is there any way to match the dock and USB to the iphone it goes with?
A charger is only connectors plastic and rubber you Can MAKE one yourself with wires so no memories
-
Can't synch iphone. Get message "synch server failed to synch the iphone. Anyone have any suggestions on how to fix this issue?
Windows 7
ios 7.1
iphone 5Hello, skifmli
Thank you for visiting Apple Support Communities.
I understand that you are unable to sync your iPhone and receive an error. I was start with restarting iTunes and your computer. Once this is done, test the results by attempting a sync. If the issue persists, go through the troubleshooting steps in the article below.
Troubleshooting Sync Services on Windows with Microsoft Outlook 2003, Outlook 2007, or Outlook 2010
Cheers,
Jason H. -
I need help getting my Airport Extreme to connect to the internet
Hello everyone,
I need some help setting up my AirPort Extreme. I'm trying to reestablish the express after a couple years of not using it. When I've set it up in the past, I've always had a hard time, and by accident it seems, I click something or turn something on and off, and I get it to work.
I have a 802.11g second generation airport extreme. I'm able to connect to my network and I can move files back and forth from the laptop to the desktop, and vise versa.
I have a MacPro 2007, ethernet cable connected to my Linksys router, with two internal hard drives. One has OSX 10.5.8, AirPort Utility 5.6.1, and everything is up to date. The other has OSX 10.6.8, AirPort Utility 5.6.1. I also have a MacBookPro 2011, It came with Snow Leopard installed and I upgraded it to OSX 10.7.4. I installed AirPort Utility 5.6.1.
All three systems can see and connect to my network, but will not connect to the internet. The extreme's IP starts with 169.254.xxx.xxx, and there's an exclamation point on the wi-fi icon.
The set up I have now is a Westell DSL modem from Verizon. I have the ethernet cable from the DSL modem connected to the WAN port of the express and the other cable going from the ethernet port from the extreme to the ethernet port of my Linksys router 4 port switch, model #BEFSR41 V.3. I have reversed the connection to and from the extreme with the same result.
This is what I've done so far with no luck:
• Unplugged the DSL modem, Linksys router, and the extreme for about twenty minutes.
• Updated the Linksys firmware.
• I have reset the extreme from the back and thru the AirPort Utility many, many times.
• I've done a hard reset. I don't know if it worked. After the extreme powered back up, my network's name and settings were still the same. On a positive note, I'm now able to get on the web when I set the connection sharing to "Distribute a range of IP addresses" using the ethernet on my desktop. Before, I was only able to do so when the connection sharing in AirPort Utility was set to "Off (Bridge Mode)".
Any other Ideas?
As always, your help is always appreciated,
RickHi Tesserax,
Thanks for getting back to me.
Sorry about the confusion. My goal is to get online wirelessly with my MacBook Pro and be able to use the ethernet connection for my MacPro.
My DSL modem is a Westell WireSpeed model A90-210015-04, the Linksys router, and the AirPort Extreme.
Rick -
A mate has an iphone 4 as a work phone, now he is leaving and needs to get all data incl messages etc onto an old iphone 3. Is this possible, any help appreciated.
RobbieYou won't be able to restore a device running iOS 4.2 from a backup of a device running iOS 5 (as you found out). And the Iphone 3G can only be updated to iOS 4.2.1 so there is no way to migrate from his iPhone 4 back to his iPhone 3G. He would have to at least have an iPhone 3GS, which will update to iOS 5.1 and would be able to restore from the iPhone 4 backup. Unfortunately, there isn't any way around it.
-
TS2755 I need to get hold of old messages from a previous IPhone. How should I go about that?
I need to get hold of old meesges about 17 months from a previous IPhone. How should I go about that ?
Well, you wouldn't....
I presume you don't have the old phone? Also, that you are talking about text or iMessages? They wouldn't be saved anywhere if that is what you were looking for.
Cheers,
GB -
Getting AnyConnect to work on demand on the iPhone
I've got certificate based authentication working on the iPhone with AnyConnect and my ASA. Now I need to get the on demand function to work. AnyConnect is configured to use certificates, the certificate is selected and connect on demand is turned on. I have my internal domain added to always connect. As a test I'm trying to access one of the web servers in the domain via Safari on the iPhone. It appears to recognize that the VPN is needed, but I get the message "The VPN connection requires an application to start up." My only option is to tap OK and then I get the Safari can't open page message. Using a ping tool, it never tries to initiate the VPN.
Hi,
In the authentication in the ASA CA server I using Manual certificate Retrieval,
I Atacched the logs of "debug crypto ca 255"
thank for you help
%ASA-6-725001: Starting SSL handshake with client outside:189.253.X:X/2219 for TLSv1 session.
%ASA-7-725010: Device supports the following 4 cipher(s).
%ASA-7-725011: Cipher[1] : RC4-SHA
%ASA-7-725011: Cipher[2] : AES128-SHA
%ASA-7-725011: Cipher[3] : AES256-SHA
%ASA-7-725011: Cipher[4] : DES-CBC3-SHA
%ASA-7-725008: SSL client outside:189.253.X.X/2219 proposes the following 6 cipher(s).
%ASA-7-725011: Cipher[1] : RC4-MD5
%ASA-7-725011: Cipher[2] : RC4-SHA
%ASA-7-725011: Cipher[3] : DES-CBC-SHA
%ASA-7-725011: Cipher[4] : DES-CBC3-SHA
%ASA-7-725011: Cipher[5] : AES128-SHA
%ASA-7-725011: Cipher[6] : AES256-SHA
%ASA-7-725012: Device chooses cipher : RC4-SHA for the SSL session with client outside:189.253.X.X/2219
%ASA-7-725014: SSL lib error. Function: SSL3_READ_BYTES Reason: sslv3 alert certificate unknown
%ASA-6-725006: Device failed SSL handshake with client outside:189.253.X.X/2219
%ASA-7-710005: TCP request discarded from 189.253.X.X/2219 to outside:200.57.X.X/443
%ASA-6-725001: Starting SSL handshake with client outside:189.253.X.X/50445 for TLSv1 session.
%ASA-7-725010: Device supports the following 4 cipher(s).
%ASA-7-725011: Cipher[1] : RC4-SHA
%ASA-7-725011: Cipher[2] : AES128-SHA
%ASA-7-725011: Cipher[3] : AES256-SHA
%ASA-7-725011: Cipher[4] : DES-CBC3-SHA
%ASA-7-725008: SSL client outside:189.253.X.X/50445 proposes the following 6 cipher(s).
%ASA-7-725011: Cipher[1] : RC4-MD5
%ASA-7-725011: Cipher[2] : RC4-SHA
%ASA-7-725011: Cipher[3] : DES-CBC-SHA
%ASA-7-725011: Cipher[4] : DES-CBC3-SHA
%ASA-7-725011: Cipher[5] : AES128-SHA
%ASA-7-725011: Cipher[6] : AES256-SHA
%ASA-7-725012: Device chooses cipher : RC4-SHA for the SSL session with client outside:189.253.X.X/50445
%ASA-7-717025: Validating certificate chain containing 1 certificate(s).
%ASA-7-717029: Identified client certificate within certificate chain. serial number: 0F, subject name: cn=acruz.
%ASA-7-717030: Found a suitable trustpoint LOCAL-CA-SERVER to validate certificate.
%ASA-6-717022: Certificate was successfully validated. serial number: 0F, subject name: cn=acruz.
%ASA-6-717028: Certificate chain was successfully validated with warning, revocation status was not checked.
CERT API thread wakes up!
CRYPTO_PKI: Checking to see if an identical cert is
already in the database...
%ASA-6-725002: Device completed SSL handshake with client outside:189.253.X.X/50445
CRYPTO_PKI: looking for cert in handle=3d4a45b8, digest=
94 e1 e9 61 b2 59 1c 72 74 22 96 ed d6 65 82 8e | ...a
CRYPTO_PKI: Cert record not found, returning E_NOT_FOUND
CRYPTO_PKI: Cert not found in database.
CRYPTO_PKI: Looking for suitable trustpoints...
CRYPTO_PKI: Storage context locked by thread CERT API
CRYPTO_PKI: Found a suitable authenticated trustpoint LOCAL-CA-SERVER.
CRYPTO_PKI(make trustedCerts list)CRYPTO_PKI:check_key_usage: ExtendedKeyUsage extension not found.
CRYPTO_PKI:check_key_usage:Key Usage check OK
CRYPTO_PKI: Certificate validation: Successful, status: 0. Attempting to retrieve revocation status if necessary
CRYPTO_PKI:Certificate validated. serial number: 0F, subject name: cn=acruz.
CRYPTO_PKI: Storage context released by thread CERT API
CRYPTO_PKI: Certificate validated without revocation checkCERT API thread sleeps!
%ASA-7-717036: Looking for a tunnel group match based on certificate maps for peer certificate with serial number: 0F, subject name: cn=acruz, issuer_name: cn=mobile.domain.com.
%ASA-4-717037: Tunnel group search using certificate maps failed for peer certificate: serial number: 0F, subject name: cn=acruz, issuer_name: cn=mobile.domain.com.
CRYPTO_PKI: Attempting to find tunnel group for cert with serial number: 0F, subject name: cn=acruz, issuer_name: cn=mobile.domain.com.
CRYPTO_PKI: No Tunnel Group Match for peer certificate.
%ASA-6-725007: SSL session with client outside:189.253.X.X/50445 terminated.
%ASA-6-725001: Starting SSL handshake with client outside:189.253.X.X/1381 for TLSv1 session.
%ASA-7-725010: Device supports the following 4 cipher(s).
%ASA-7-725011: Cipher[1] : RC4-SHA
%ASA-7-725011: Cipher[2] : AES128-SHA
%ASA-7-725011: Cipher[3] : AES256-SHA
%ASA-7-725011: Cipher[4] : DES-CBC3-SHA
%ASA-7-725008: SSL client outside:189.253.X.X/1381 proposes the following 6 cipher(s).
%ASA-7-725011: Cipher[1] : RC4-MD5
%ASA-7-725011: Cipher[2] : RC4-SHA
%ASA-7-725011: Cipher[3] : DES-CBC-SHA
%ASA-7-725011: Cipher[4] : DES-CBC3-SHA
%ASA-7-725011: Cipher[5] : AES128-SHA
%ASA-7-725011: Cipher[6] : AES256-SHA
%ASA-7-725012: Device chooses cipher : RC4-SHA for the SSL session with client outside:189.253.X.X/1381
CERT API thread wakes up!
%ASA-7-717025: Validating certificate chain containing 1 certificate(s).
%ASA-7-717029: Identified client certificate within certificate chain. serial number: 0F, subject name: cn=acruz.
%ASA-7-717030: Found a suitable trustpoint LOCAL-CA-SERVER to validate certificate.
%ASA-6-717022: Certificate was successfully validated. serial number: 0F, subject name: cn=acruz.
%ASA-6-717028: Certificate chain was successfully validated with warning, revocation status was not checked.
%ASA-6-725002: Device completed SSL handshake with client outside:189.253.X.X/1381
CRYPTO_PKI: Checking to see if an identical cert is
already in the database...
%ASA-7-717036: Looking for a tunnel group match based on certificate maps for peer certificate with serial number: 0F, subject name: cn=acruz, issuer_name: cn=mobile.domain.com.
%ASA-4-717037: Tunnel group search using certificate maps failed for peer certificate: serial number: 0F, subject name: cn=acruz, issuer_name: cn=mobile.domain.com.
CRYPTO_PKI: looking for cert in handle=3d4a45b8, digest=
94 e1 e9 61 b2 59 1c 72 74 22 96 ed d6 65 82 8e | ...a
CRYPTO_PKI: Cert record not found, returning E_NOT_FOUND
CRYPTO_PKI: Cert not found in database.
CRYPTO_PKI: Looking for suitable trustpoints...
CRYPTO_PKI: Storage context locked by thread CERT API
CRYPTO_PKI: Found a suitable authenticated trustpoint LOCAL-CA-SERVER.
CRYPTO_PKI(make trustedCerts list)CRYPTO_PKI:check_key_usage: ExtendedKeyUsage extension not found.
CRYPTO_PKI:check_key_usage:Key Usage check OK
CRYPTO_PKI: Certificate validation: Successful, status: 0. Attempting to retrieve revocation status if necessary
CRYPTO_PKI:Certificate validated. serial number: 0F, subject name: cn=acruz.
CRYPTO_PKI: Storage context released by thread CERT API
CRYPTO_PKI: Certificate validated without revocation checkCERT API thread sleeps!
CRYPTO_PKI: Attempting to find tunnel group for cert with serial number: 0F, subject name: cn=acruz, issuer_name: cn=mobile.domain.com.
CRYPTO_PKI: No Tunnel Group Match for peer certificate.
%ASA-6-725007: SSL session with client outside:189.253.X.X/1381 terminated.
Maybe you are looking for
-
Report Performance degradation
hi, We are using around 16 entities in crm on demand R 16which includes both default as well as custom entites. Since custom entities are not visible in the historical subject area , we decided to stick to the real time reporting. Now the issue is ,
-
BAM reports taking more time while fetching data from EDS
I have created an external Data Source(EDS) in the BAM, and when i create an object with that EDS, it is taking very long to fetch data from the EDS( more than 20 mins.), but as the Database is installed on my local system, when i fire a query there,
-
Whn sending my emails with an attachment they are not received by the recipient as an attachment. It forms part of the email rather than as a n attachment. Recipient therefore cannot save or download my PDF. How can I change this?
-
Adobe CC applications in a trail mode
hello. This morning, after my office PC had a hardware issue, i got a new PC. i installed the Adobe CC but all the applications are in a trail mode. can you please assist me with this? i tried to sign out and sign in - but nothing. i also tried to r
-
RESETLOGS 이전 BACKUP을 이용한 RECOVERY
제품 : ORACLE SERVER 작성날짜 : 1999-10-28 Resetlogs 이전 backup을 이용하여 resetlogs 이후 database 상태로 recovery database를 resetlogs option으로 open하게 되면 control file과 data file header를 변화시키고 online redo log의 모든 redo entry를 무효화시키게 된다. 그래서 resetlogs 이전 시점의 backup을 가지고