Do I need to have it set to Game Mode for Alchemy to wo

I have the dreaded cracking/popping right now and for whatever reason this goes away when I put my X-Fi into either Entertainment or Audio Creation mode.
Can I keep the settings in Entertainment mode and still have ALchemy give me EAX when I run Alchemy supported games?

Yes you must be in gaming mode, you have to run ALchemy and add your games, then switch them to the enabled side. http://img65.imageshack.us/img65/722...2007098su2.gifBut now my game performance sucks, I had way better fps with my SB Live! 5.

Similar Messages

What licenses are needed to have CUCM not in demo but for LAB

I am trying to build a lab with new versions of CUCM 9.1
I do not want to use demo versions for 60 days nor request a temp license for 6 months.
what is the minimum licenses i will need to have CUCM in full production mode for Lab somulation and with the least cost?

Hi.
If you are a Cisco partner, you can obtain an NFR kit at a reasonable price.
Check the following link.
http://www.cisco.com/web/AP/partners/promotions/nfr/index_nz.html
HTH
Regards
Carlo
Please rate all helpful posts
"The more you help the more you learn"

Do I need to have a .MAC account in order for me to purchase a photo book?

Do I need to have a .MAC account in order for me to purchase a photo book?

No. You do need an Apple ID, which is the same thing you'd set up to buy content on iTunes or stuff from the Apple store online. This doesn't cost you extra, e.g. $99 for a .Mac account, but you do need to set it up with a credit card.

HT201263 my iphone5 does not have passcode setting option. this is for auto-lock function

my iphone5 does not have passcode setting option. this is for auto-lock function

Hello SLLH
You can find the settings for the Passcode Lock in Settings > General > Passcode Lock. If you are looking for Auto-Lock, then go to Settings > General > Auto-Lock. If you are not seeing these options then you may need to do a reset settings on your iPhone, which is located at General > Settings >Reset > Reset All Settings.
iPhone User Guide
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
Thanks for using Apple Support Communities.
Regards,
-Norm G.

HT4859 I have an iPhone 5 and have just set up the iCloud for it. I also have an iPad with different content and I also want to connect it to iCloud. Will I lose everything that's on my iPad or iPhone or do they sync together without losing anything?

I have an iPhone 5 and have just set up the iCloud for it. I also have an iPad with different content and I also want to connect it to iCloud. Will I lose everything that's on my iPad or iPhone or do they sync together without losing anything?

The problem is that all services are bundled with your Apple ID ([email protected]):
Your iCloud account (Mail, Contacts, Calendars, Reminders, Notes, Backups, etc.),
also iTunes & App Store purchases (Music, Movies, TV Shows, etc.),
and the iTunes Match services.
(I guess that all your devices - yours and your wife's are connected to one iTunes library, right?)
If you want that your wife gets her own iCloud account for Mail, Contacts, Calendars, etc. but gets also access to your media then you have two set up two things on her device:
iCloud (Settings > iCloud) with her account (e.g. [email protected])
and
iTunes & App Stores (Settings > iTunes & App Stores) with your account (e.g. [email protected]).
In this case she gets access to your library and could use the same iTunes Match account.
(See also: Using one Apple ID for iCloud and a different Apple ID for Store Purchases http://support.apple.com/kb/HT4895)

HT201270 i have just updated my old 3GS and now when i am on restore the window is comming up and asking for a password. i have not set up a password for restore, please help how i can restore my date???

i have just updated my old 3GS and now when i am on restore the window is comming up and asking for a password. i have not set up a password for restore, please help how i can restore my date???

capriz wrote:
i have just updated my old 3GS ...
To what... iOS 7 is Not supported on the 3 GS

After Upgrading Acrobat Reader XI to Acrobat XI Pro the previewer in Outlook and Windows Explorer doesn't work. I have to set the default program for .pdf's to Acrobat Reader inorder for the previewer to work.

After Upgrading Acrobat Reader XI to Acrobat XI Pro the previewer in Outlook and Windows Explorer doesn't work. I have to set the default program for .pdf's to Acrobat Reader in order for the previewer to work.
Can anyone recommend a solution?

If I set the default program for viewing PDF as Acrobat XI Pro the a PDF file will open with Acrobat XI Pro, but in Outlook I will get a white screen and the information bubble "This file cannot be previewed because there is no previewer installed for it" and in Windows Explorer I get a white screen in the preview pane.
My Acrobat version is 11.0.10
I am running Windows 7 Professional with Service Pack 1
My Internet Explorer is Version 11.0.9600.17691
Update Versions 11.0.17 (KB3032359)
I am running Microsoft Office 2013

I need to have both Next & Back buttons displayed for viewing 20 records at

Hi Everybody,
I have a JSP page which has 2 part: The header (Selection for search with the SEARCH button) and a search result table.
Is it possible to remember the last record printed & start from the next record when I click on "Next" button? When I click on the "Next" button will it create new page? I need to have both Next & Back buttons displayed for viewing 20 records at a time.
The current JSP is using "session.removeAttribute("XXXWorkItemVector") to print out records.
I'm very new to JAVA and JSP, so please help me with my assignment and send me e-mail to [email protected]

Check this:
http://forum.java.sun.com/thread.jsp?forum=45&thread=188239
This should be of help to you.

Set up binary mode for backup over FTP

Hello!
I am about to set up the backup for Oracle DB from Tcode DB13.
My SAP systems are installed on Windows (64 Bit).
The backup data should be saved on the Unix-Samba share via FTP.
If I execute DB-Backup the backup is successful, BUT:
The file names are very strange e.g. S3FV1~6
The second problem is that the files will be written to the wrong directory
(I have set the path to "sap/backup" and the files will be written to "sap").
My question is:
I have heared about binary mode during backup procedure With which parameters in init<DBSID>.sap can I set up binary mode for the backup?
Which other FTP-server-parameters or settings in file init<DBSID>.sap are responsible for this issue?
Thank you very much
regards

Hi,
this program may help:
http://www.bombich.com/software/ccc.html (You need the older version for Panther)
You can use it to clone your internal HDD to your external one, and then clone your external one to your internal one after you erase (and write zeros to ensure everything is gone) using Disk utility (I can't vouch for the actual security of this, but 'apparently' if you do the highest setting it will be secure) after booting from an OS X DVD. This is depends on the drive having the ability to boot, however.
After you run Cabon Copy Cloner/Clone your HDD see if you can boot from the drive. (Hold option at startup). Unless there are issues with the specific drive model, your eMac should be able to boot from all FireWire devices.
I'm not sure where Tiger comes into this, however. (As you mention later in your post). The way I understand, you basically just want to erase zeros on your HDD and boot from it just as you acquired it (hence the cloning/re-cloning of the internal HDD).
Good Luck!

Set different authentication mode for OWA (without 2 ip address)

hi
http://social.technet.microsoft.com/Forums/office/en-US/fda18a29-a484-4ed5-903b-aa06e8f7a032/set-different-authentication-mode-for-owa?forum=exchangesvrclients
Step 1: IP Address
Obtain a second IP address and add it to the NIC of your server.
Step 2: DNS
Add a DNS entry for That secondary IP address for the name we will want to use in the new FBA OWA Web site. I have chosen "testwebmail." Be sure there is a valid SSL certificate (recommended to have UC or SAN SSL certs) on the server Which has the
new name "testwebmail" that will be used in the certificate.
Step 3: New Web Site
Create a new web site in IIS on the Client Access Server and bind it to the new IP address used in step 1.
Step 4: Adding Exchange Virtual Directories
The web site has been created and bound to the secondary IP address of our server. Also the DNS record That will be used to access the OWA FBA new page was added to DNS. The next step is to go into EMS and begin adding our virtual directories for OWA and ECP.
Login to the Exchange server and open the Exchange Management Shell. Then run Get-Get-OWAVirtualDirectory and ECPVirtualDirectory to see the default OWA and ECP directories.
New-OWAVirtualDirectory -WebSiteName FBA -InternalUrl https://url/owa
New-ECPVirtualDirectory -WebSiteName FBA -InternalUrl https://url/ecp
Step 5: Configure the Virtual Directories
To configure the virtual directories we will disable FBA on the Default Web Site OWA and ECP virtual directories
New-OWAVirtualDirectory -WebSiteName "FBA"
Enable the Basic authentication via running the following command:
Set-OWAVirtualDirectory -Identity "yourservername\owa (FBA)" -BasicAuthentication $true
Set-OWAVirtualDirectory -Identity "OWA (Default Web Site)" -WindowsAuthentication $true -BasicAuthentication $false -FormsBasedAuthentication $true
Step 6: iisreset
I want to set this settings; but I don't have 2 ip address and I want to set whit one ip address.
can please tell me how can set this settings with one ip address?
and please tell me about publishing whit tmg.
thanks

Hi,
Based on my research on Host Header, it seems using Host Header can achive your goal.
More details on Host Headers:
1. Host headers let you assign more than one site to a
single IP address on a Web server.
2. To host more than one Web site on a Web server, you can assign a unique IP address to each Web site, designate a non-standard TCP port number for a Web site,
or use host headers. Of the three methods, it is more common to use host headers than to assign unique IP addresses to Web sites or to use non-standard TCP port numbers.
Configure a Host Header for a Web Site (IIS 7)
http://technet.microsoft.com/en-us/library/cc753195(v=ws.10).aspx
Please correct me if there is anything misunderstand.
However, Microsoft recommends creating the second OWA/ECP virtual directories in a new IIS web site with a different IP address, and using it for internal client access.
Thanks
Mavis Huang
TechNet Community Support

How to set the stack size for alchemy application?

Anybody know how to set the stack size for alchemy application?
If you know, please tell me how to adjust the stack size for alchemy application?

Hi,
The stack size is set as public const gstackSize in the alchemy generated code. You can see this if you build with ACHACKS_TMPS set. The default is one megabyte.
One way to change the stack size is to use llvm-dis to disassemble avm2-libc/lib/avm2-libc.l.bc, generating avm2-libc.l.ll, modify the constant, and then use llvm-as to recompile your modified library and overwrite the old one. These utilities should be in your path if alchemy is set up.

Do I need IOS firewall feature set on Catalyst 6500 for FW blade?

Hi all,
If I install a FW blade in Cat6500, should I need to have the IOS firewall feature set on Cat6500 itself?
Thanks and Regards,
mak

Nope.
The FWSM uses it's own OS based on PIX OS. While it uses SVIs configured in the MSFC, it otherwise runs autonomously from the Sup and MSFC, even in Native mode.
Let me know if this helps by rating the post.
Michael

Do we need to have Multiple Vendor Roots in PPOCV_BBP for Multiple back end

hi Gurus,
Do we need to have multiple vendor root orgs in PPOCV_BBP, when
we have mutliple backends to be linked to the same SRM server ?
Please do provide your valuable inputs.
Best Regards
Prashanth

Hi
Ideally, you should have only one Root node for Vendor.
Please refer to these links.
http://help.sap.com/saphelp_srm50/helpdata/en/b4/9de8cc7d4b11d2b423006094b92d37/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/62/fb7d3cb7f58910e10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/e5/1c6d3e40753f7ce10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/56/54f137a5e6740ae10000009b38f8cf/frameset.htm
Also refer to transaction - BBPMAININT in SRM Web page for Business Partners.
Hope this will help.
Please reward suitable points, incase it suits your requirements.
Regards
- Atul

Firefox's option bar for saving username and passwords will not show, I have it set to remember passwords for sites. Can sites be added manually?

I was using Norton to remember my user names and passwords, however I do not use Norton any longer. Firefox does not give me the option of saving passwords even though I have it set to remember them.
There are no sites in the exceptions list. How can I reset Firefox so the option bar shows?

* Make sure that you not run Firefox in (permanent) [[Private Browsing]] mode
* In Private Browsing mode some menu items are disabled (grayed) and features like visited links are disabled and not showing
* You are in Private Browsing mode if you see "Tools > Stop Private Browsing", possibly grayed
* You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
* To see all History settings, choose: Tools > Options > Privacy, choose the setting Firefox will: Use custom settings for history
* Uncheck: [ ] "Automatically start Firefox in a private browsing session"
See also http://kb.mozillazine.org/Password_Manager

I need to have furhter options on my VI(for HP 8712B RF Network Analyser)

Hi,
I've downloaded the HP 871Xb driver for Labview 6.0 from the NI website that also had a getting started vi which has the basic data acquisition features. I also had a look at the other vi's provided but those too didn't have the features I'm looking for.
I want my vi to have options like Amplifier->(Transmission / Reflection / Power) menu. Also an Averaging menu with Average On/Off and Average Factor options. Also a source menu where I can choose the Number of Points. Also it should have Log mag/Lin mag/SWR/phase/real/imaginary/impedence magnitude options.
None of the VI's provided by the driver had these options.
Is there anyway I could program a VI with these options. Or better
yet, is there any place I could download a VI with these options already available.
Thanks,
Kunal.

Hi Kunal,
The fastest way to get a solution for your problem is to write those features by yourself. You can look into the manual for that instrument and contact the instrument manufacturer for some help.
You can submit a request to add all the features that you want in that driver on our website as well. If you want to do so then go to:
http://www.ni.com/devzone/idnet/other.htm
There are some other websites listed on this page where you can look for a driver of your interest.

Do I need to have it set to Game Mode for Alchemy to wo

Similar Messages

Maybe you are looking for