Do I need to have the software to charge my Zen MicroPhoto with U
I haven't got the latest firmware
is this going to damage my microphoto Do I need to get the software somehow because I'm not home...
It's very strange.
I plugged my zen and although the battery charge signal is flashing the battery isn't charging (the battery signal doesn't fill) I have it on for 4 hours and the battery status hasn't changed...
the computer recognized the device, cause I have windows xp and service pack but still it won't charge (or maybe it charges very very slowly... )
what could be wrong?
could it be that I have USB intead of 2?
or maybe is it that I don't have the software installed?
Similar Messages
-
Hi,
I am using your software: CS6 InDesign Suiteon a PC using a Windows 7 operating system.
Due to eyesight issues, I need to have the menu bars of programs in easy-to-read font and picture size. Specifically, the menu bar across the top (File, Edit, View, etc.), and the menu bar on the left side with the graphic depiction of options.
In earlier versions of Windows (e.g. XP), whenever I changed the screen resolution on my computer to a lesser resolution in order to show the link icons on my desktop in a larger, more readable size, all the software programs, including yours, appeared on my screen with the menu bars in the larger font size that I needed.
However, in Windows 7, this is not the case. Even though I have selected the lowest resolution, making the icons on my desktop extremely large, I cannot read the options across the top menu bar of your program, nor the pull-down menu items that they contain. I cannot see the graphic depictions of options on the left side of the screen. They are all too small. How can I make your program increase the size?CS6 is not high-DPI compatible/ enabled and that can't be changed. If you cannot6 make it work with your operating system means, then short of joining Creative Cloud and using newer versions there is nothing you can do.
Mylenium -
I have os 10.5.8 software on my mac and I need to update the software on my mac so I can update my iphone 4s, every time I try to update my mac with the 6.0 it says it doesn't need any updates, but my mac still has 10.5.8.... any help?? Please...
You must first buy Snow Leopard from Apple: 800-MY-APPLE (in the US)
Make sure your system meets Snow Leopard's requirements:
Mac OS X 10.6 "Snow Leopard" System Requirements
To install Snow Leopard for the first time, you must have a Mac with:
An Intel processor
An internal or external DVD drive, or DVD or CD Sharing
At least 1 GB of RAM (additional RAM is recommended)
A built-in display or a display connected to an Apple-supplied video card supported by your computer
At least 5 GB of disk space available, or 7 GB of disk space if you install the developer tools -
If i lose my ipad,and i have the software find my ipad on both my ipad and computer so does the lost ipad need to be connected to internet for it to be found because mine is ipad 2 wifi only.
ppl please answerClick here for information.
(85181) -
I have an Iphone 3G with the software 4.2.1 but i need to update the software to 4.1 to download a particular app before i go away tomorrow but i cant update the software till the 13/10/12 which is annoying just wondering if there was an options available for me to push the update to now so i can use this app before i go away
i have an iphone 3 too and i don't want to spend again money for a new iphone , and i had that problem too , i don't got any app's on my iphone , but i whould realy helpfull if apple could make another update in order to work the apps ...
-
I don't have the software updates in my general settings so how do I get the updates to use instagram, Facebook etc? Any help appreciated
The option to update without the computer (Over the air) was made available with iOS 5. If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
http://support.apple.com/kb/HT4972
Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
http://support.apple.com/kb/HT4623
Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
http://support.apple.com/kb/ht1848 -
HT4623 i have the ipod touch 8gb. i need to update the software 4.3. i try but don;t due that.
I HAVE THE IPOD TOUCH 8GB I NEED TO UPDATE THE SOFTWARE 4.3. I TRY BUT DONT FIX
If it's a second generation iPod touch, it can't be updated past 4.2.1. 8GB models sold at the same time as the third generation ones are second generation.
(72942) -
I have a 2012 MacBook Pro and a brand new Apple TV, therefore I know I have the software needed, but I cannot get my AirPlay Mirroring icon to pop-up. What do I do?
Is your Mac up to date (10.8.2) ?
Is your Apple TV up to date (5.2) ?
http://support.apple.com/kb/HT5404
http://support.apple.com/kb/TS4215 -
I am using CS6 InDesign on a PC using a Windows 7 operating system.
Due to eyesight issues, I need to have the menu bars of programs in easy-to-read font and picture size. Specifically, the menu bar across the top (File, Edit, View, etc.), and the menu bar on the left side with the graphic depiction of options.
In earlier versions of Windows (e.g. XP), whenever I changed the screen resolution on my computer to a lesser resolution in order to show the link icons on my desktop in a larger, more readable size, all the software programs, including yours, appeared on my screen with the menu bars in the larger font size that I needed.
However, in Windows 7, this is not the case. Even though I have selected the lowest resolution, making the icons on my desktop extremely large, I cannot read the options across the top menu bar of your program, nor the pull-down menu items that they contain. I cannot see the graphic depictions of options on the left side of the screen. They are all too small. How can I make your program increase the size?NO way.
Mylenium -
I just bought a new iPad 2. It says I need to update the software but it keeps failing., I just bought a new iPad 2. It says I need to update the software but it keeps failing.
Have you already activated the iPad? That is what the screen is telling you to do - connect to the computer with the supplied cable and run iTunes while connected - and iTunes should guide you through the set up process. If you have already set up the iPad and you are still getting thos screen message - restore your iPad. You must be running iTunes 10.5 on your computer as well.
Restore iPad
If you can't restore this way, you will need recovery mode.
Unable to Restore -
I have a dumb phone not a smart phone. It doesn't have the software update under general setting. I tried to upgrade online but nothing! Currently, I cannot get many apps because I need the upgrade. Help
That's because you don't have iOS 5 or higher. See the following:
Connect the phone to your computer. Open iTunes. Select your phone from the sidebar under Devices. Click on the Summary tab in the main window. Click on the Update button. -
How do I update my ipad 2 if my OS is prior to 5.0, it does not have the software dropdown
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.4. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
1. Go into the iPad's Settings.
2. Locate and tap "General" from the menu on the left.
3. The second option from the top is "Software Update". Tap this to move into the update settings.
4. Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
5. Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
1. If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
2. Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
3. After canceling the dialog box, iTunes should automatically sync with your iPad.
4. If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
5. After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
6. From the iPad screen, click on the Update button.
7. After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
8. After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
Cheers, Tom -
i've been getting an error when trying to play online games saying that i need to have the browser in 32 - bit mode. my browser is in 32 - bit mode but the msg keeps coming up and not running the game
I dunno, that doesn't make any sense to me.
I just shut down and rebooted into the SnowLeopard partition and took a peek at the preference panes. There are only 3 that run in 32 bit only. They are all 3rd party, and none of the prefpanes are non Intel. Like I said, I have never owned a PPC machine. Anyhow, SnowLeopard doesn't even have an iCloud prefpane, or a combined mail, contacts, and calenders prefpane, and the ML security and privacy prefpane is all new as well. The software update prefpane is Intel and 64 bit in both SnowLeopard and Lion.
As to the triple boot, unless I'm totally mistaken, what I have here is, in essence, 3 seperate descrete computers in one box. All using the same hardware. but one at a time. I wouldn't know how to get more than one running at the same time, without using a virtual machine, even if I wanted to. (Which I don't) I do sometimes transfer files from one to another using the shared folder, but other than that, they do not interact. How could ML system preferences be trying to launch prefpanes from a totally different machine? -
I have a serial number for Adobe Acrobat standard, however I no longer have the software installed
I have a serial number for Adobe Acrobat standard, however I no longer have the software installed and need to re-install it - the only download I can find is for the free trial of Acrobat Professional, which is no good as my serial number does not work with this.
Please can you provide a download link for Acrobat Standard
Thank you
ScottDid you choose the download option at the time of purchase? If so please see http://forums.adobe.com/thread/1006208?tstart=0&promoid=KBHJQ for information on how to download the software from your account.
-
I can not seem to update my iPad. To use certain apps I need ios5, however I do not have the software update option to do so. Is it possible to update my iPad any other way?
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom
Maybe you are looking for
-
Would it be possible to have a feature in the Web Module to allow the user to add buttons to the generated website e.g Home, Galleries etc and allow these to be configurable as in the url and style. This would better facilitate the integration of th
-
Hi everyone , I'm trying to change my card's default key to some other key . My card supports GP 2.1.1 and JCRE 2.2.1 My default keys are : I've tried put key command (after opening secure channel ) with defferent P1 and P2 and key versions but I rec
-
Enhance sorce code in Function module option
Dear Expets , Please let me the advantage of the button - enhance source code in the menu bar of the standard function module. Can i write my own logic there . I am planning to modify the function module - CK_F_INTERNAL_
-
Why does PS CC print too dark? I found printing from PS CS5 was more accurate.
Why does PS CC print too dark? I did not have this issue when printing with PS CS5.
-
"Use This Mailbox For" grayed out
Hello. This question has been asked before, but has not been asnwered that I can tell. My question is not "what is this menu item for?" or "How do I use this feature?" ... the issue that I am having is that the options are all unavailable when I try