Do i need to install a v-ram in the ram bit of my emac ?

Hi
Im abit confused.....!
I bought this emac in nov 2002 - and i do alot of video conversion work - 5 yrs down the line.
do the slots in my RAM slot area only take RAM or do they also take what i think is called
v-ram (Is this also a 'pci card' ??) and if so should i install some ?
yours confused
d

The the two DIMM slots under the access hatch on the bottom of the eMac are for the computer's RAM. The graphics "card" (actually a chipset on the main logic board) has soldered video RAM and cannot be upgraded. A PCI card is different from either computer or video RAM; different types of cards (mainly video cards, but there are other kinds) can go into computers that have PCI slots, but the eMac has no PCI slots.

Similar Messages

HT3669 I only have a HP printer and why I need to install a file for all the HP printers drivers 590MB??? if normally the size of my file should be 5MB. some one could me help to avoid installation of 590MB for my new mountain lion software???

Hi guys..!!
I would like to know if someone could help on this:
I just have a HP printer (HP Designjet 100) and for some reason I need to install a file for all the HP printers drivers in total 590MB to be able to use my printer in my mountain lion???
If normally the size of my files in the for previous software was more or less 5MB why now i need to install 590?
Some one could help me how to avoid installation of 590MB for my new mountain lion software???
Thanks

If you go to http://support.apple.com/downloads and locate the HP Printer Drivers installer, you will find that it is 473.4 MB (for version 2.11). If you install this, it will install the full set of drivers for every model of HP printer that is supported by the drivers distributed through Apple. The disk space occupied once installed will probably be larger than the download, since the downloaded file is compressed.
On the other hand, if you have an HP printer connected and you use Software Update (or the Update tab in App Store), that should offer you a much smaller set of HP drivers, which are only applicable to your printer (and possibly a few similar ones). These updates are typically only tens of megabytes rather than hundreds of megabytes.
If Software Update doesn't offer you any HP drivers then it either thinks you have the latest drivers installed already, or the printer model is not supported by the drivers available from Apple.
This article lists all of the printer models for which Apple distributes the driver:
http://support.apple.com/kb/HT3669

I need to install servlet-api.jar in the libext folder.

Hi I am doing a tutorial on struts 2.0.11.
i need to install servlet-api.jar in the libext folder which I have created inside WEB-INF
Now I have downloaded servlet.api which is in the zip form.
When I extract the files. Its giving me two folders
1. javax
2. META-INF
Inside javax there is a folder called servlet. Inside servlet folder there are
a) bunch of call files
b) http folder
c) resources folder
Inside http folder there are
a) class files
b) properties files
Inside the resources folder there are
a) dtd files
b) xsd files
Inside the META-INF folder there is the manifest.mf file
I just need servlet-api.jar
I think that I have extracted the contents of servlet-api.jar by using the extract feature of winzip.
Do you think that by just changing the extension of the file from servlet-api.zip to servlet-api.jar it will do the trick or do i need to do something else.
Please guide

pksingh79 wrote:
Hi ^^,
your replies were very helpful. I did try to check the lib folder of the webserver and there was not servlet-api.jar. However I downloaded a dummy project and it did have servlet-api.jar in it, so I am ok for now.
thanks and regards,
PrashantYou should not be doing that. Always use the one from the application server which you're going to use. Otherwise you will possibly get in runtime trouble due to version differences.
The actual location and filename of the servlet API might differ per application server implementation. If it was for example Tomcat 6, it is the servlet-api.jar in the /lib directory. If it was for example Glassfish (the current release), then it is the javaee.jar in the /lib directory.

Hi, I need to install Adobe Flash Player because the version I have installed in my Mac Os is old, but I can´t because I need to write my email and my password and I don´t remember my password, so what can I do?

Hi, I need to install Adobe Flash Player because the version I have installed in my Mac Os is old, but I can´t do it because I need to write my email and my password and I don´t remember my password, so what can I do? Thank you

The email and password will be the ones for your computer's security, not something for any Adobe product. You might need to consult Mac customer support if you are unable to determine the required information.

I'm thinking about purchasing a 21.5" iMac. The base model comes with 8GB of RAM, and the RAM is not user-upgradeable down the road. Is 8GB enough memory or should I upgrade to 16GB?

I'm thinking about getting a 21.5" iMac which comes with 8GB of RAM. Unfortunately, the RAM is not user-upgradeable. Do you think 8GB is enough memory, or should I upgrade to 16GB? Besides internet surfing and email, I like to play flash games and listen to internet radio. Occasionally, I might want to stream a movie. I would greatly appreciate any advice you could give me.

For what you list, 8GB should be adequate. I ran with 4GB without any issue for over a year in my iMac i7 before I added RAM, primarily for running Win 7 via Bootcamp.
The tasks that need a lot of RAM are typically video editing/production, heavy-duty photo manipulation (not iPhoto or PS Elements), and professional page layout like Adobe Creative Suite. If you think that, down the road, you may want to delve into those fileds with this computer, by all means get the extra RAM.
I like to play flash games
I didn't try a lot of Flash games while I still had 4GB RAM but those I tried ran without issue and without causing a non-trivial number of page-outs

Does 64 bit Windows see more RAM then the 32 bit version under Boot Camp?

To be or not to be....
I've found many useful hints on boot camp/ windows/ RAM correlations but none on this question, grateful for any idea?
paul

Your question has been answered many times in the Boot Camp forum. https://discussions.apple.com/community/windows_software/boot_camp
32 bit Windows can address 2^32 addresses. 64 bit Windows can address 2^64 addresses. There are some limitations for 64 bit Windows depending on the version. But yes, 64 bit Windows addresses far more ram than do the 32 bit versions of Windows. So if your computer has more than 4GB of ram, you must use the 64 bit Windows in order to use all your ram.
Search using Google and you will find many more articles explaining the differences between 32 and 64 bit Windows.

My P75-A7200 laptop with bad ram - Is the ram soldered to the motherboard???

Hello,
I have a quesiton about my laptop and issues I've been having.
It has been blue screening a lot over the past month or so and when I took it back to the store where I bought it for service, I was told that there was nothing that they could do to it since the ram was soldered to the mainboard and that it would have to be sent back to the factory for repair.
I'm just trying to find out more about my laptop and hopefully avoid a costly repair if possible. I thought my laptop had 4 dimm slots, if so, where do I find the slots and can I replace the ram???
Is it really soldered to the main board???
Thanks for any help.

the link but it doesn't talk about the 2 dimm slots under the keyboard that I was reading about earlier today.
You must not have looked at the video! It's out of focus, but you can see that the RAM is replaceable and inserted in slots.
That video is for a Satellite P75-A7200. As you can plainly see, the RAM is not under the keyboard.
Even the spec says there are four slots!.
Memory
 Configured with 8GB DDR3L 1600MHz (max 32GB)
 4 main memory slots. Two slots are occupied.
-Jerry

Switching computers and need to install Photoshop and lightroom on the new computer. I own the products.

Hello. How can I do this? Do I need to deactivate it on the old machine?

You are allowed to have two activated installations, so if you prefer you can keep the original installation intact. If you prefer not to then the minimum you need to do is deactivate it.
Downloads:
CS3 - http://helpx.adobe.com/creative-suite/kb/cs3-product-downloads.html
CS4 - http://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html
CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html
CS5.5 - http://helpx.adobe.com/creative-suite/kb/cs5-5-product-downloads.html
CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
Lightroom - all versions
Windows
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
Mac
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

I bought the adobe photoshop/premiere elements 10. I installed from disc 1 for the 32 bit windows.

What do I do with the other 4 discs??

For Windows 32 bit you only need disks 1 and 4. Simply insert disk 4 into your DVD drive to complete the content installation and follow the on-screen instructions.

Need to install a second copy (per EULA)

I have a single user license for RoboHelp 7. I need to
install a second copy of the software on my laptop. Have not been
successful yet.
Section 2.5 ("Portable or Home Computer Use") of the EULA
expressly permits a single license user to install a second copy of
the software on a laptop. However, the software activation
mechanism prevents this. I installed the software, but it will not
run until activated. Attempts to activate it result in an error
about the software license already being activated and giving me
the choice of deactivating the copy on my desktop (my main
machine).
I have only a limited time need for this second copy. The
very specific purpose is to have a copy of the software on my
laptop to show my RoboHelp work to potential employers during
interviews. This complies with the EULA as I would not be using the
software simultaneously on my other computer at home. Once I get a
job, I have no need for this second copy and would uininstall it.
Thanks for any advice anyone can provide.

Welcome to the forum.
Indeed you can install on a second machine but without doubt
the copy you are using has been activated twice already. This can
occur if your machine has been reformatted and you did not
deactivate first. Maybe your desktop machine was changed and you
installed on the new machine without deactivating on the old one.
Could a colleague have installed it to take a look?
Go back to the activation screen and it will advise you what
to do. You need to phone the number that you can find there and
explain the problem. I had this after a hard disk failure and was
given an activation number.

Will I need to install OS X Lion?

Hello,
Im currently running Snow Leopard and I wish to get the Moutian Lion OS when it comes out.
So Im wondering that do I need to install Lion first or can I go straight ahead and install Moutiain Lion.

The short answer is.. No, you don't need to install Lion first.
For the long answer, click on the following link...
http://www.apple.com/osx/how-to-upgrade/

MacBook Pro 13" Unibody Mid 2012 SSD Dual Drive Installation , i need to install ssd or hdd without removing my optical drive?

salam 3lykum,
my MacBook Pro 13" Unibody Mid 2012 need to install SSD Dual Drive in the enclosure in the laptop, but without removing my optical drive? can one help me. and without cable sata to usb to use it external.

I only know of one 2 terabyte drive that will fit in a notebook - and it comes in an enclosure that you must disassemble to get to the drive -> http://www.amazon.com/dp/B00FRHTSK4/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&coli d=110YIC0GU53A7&coliid=I38PEBUNYX6OUM&psc=1.
HGST does make a 1.5 terabyte drive that would work quite well in your machine - the Travelstar 5K1500.
Clinton

What do you need to install to run a deployed executable with IEEE?

I'm having trouble to communicate with my IEEE device thru LabVIEW. I just want to double check if I installed the right things. I developed my application in LabVIEW 8.0, and deployed an executable to a test system. The test system has the IOTech IEEE Driver, and the LabVIEW 8.0 Run Time Engine. I just want to know if I need to install anything else other than the run time engine. Please dont' go into the compatibility of the IOTech driver and LabVIEW.'
Thanks
See-Ming =(

yeah.. it does come with a program to communicate with the card
the problem is, I'm having problems communicating thru LabVIEW, but not the utility program. And this only happens on my test system, not my development system.
Oh well.. I'll keep calling IOTech and see if they can help..
Thanks!
See-Ming

T420 won't boot with 2x4GB RAM (two identical RAM)

Hi all,
I am experiencing a weird issue that I'm hoping you'll be able to help me with.
My T420 came with 1x4GB of ram (underneath the keyboard) and I wanted to upgrade to 2x4GB RAM so I bought exactly the same RAM again.
Both RAMs work fine by themselves, in the bay under the keyboard as well as in the bay underneath the laptop. Both RAM were tested individually in both RAM slots. The laptop works just fine with either of the RAM individually in either of the RAM slots.
BUT if I put them both in at the same time, the T420 won't boot. It switches on (screen stays black) and instantly switches back off. Without pushing any button, the T420 will then switch itself on again about 3-5 seconds later. This process is repeated indefinitely. I don't even get to see the ThinkPad security screen where you can access BIOS. I switched the RAM around in the slots but this didn't resolve the issue either.
I have never had anything like that before. Does anyone have an idea on how to solve this problem?
Thank you very much in advance.
Regards
Lippasti

Has seriously no one ever had this issue? There must be a solution to this since I can rule out that either one of the RAM or the RAM slots is damages since each RAM works fine in each slot separately. I'm only experiencing this issue if I put them in simultaniously.
Is there possibly any BIOS settings which I need to adjust prior to installing the second RAM?
Not that I think it matters since I can't even boot it to the Windows screen but here are some specs. I am using a Kingston 512GB SSD and the other specs are:
Here's the RAM I am using.

"One or more field types are not installed properly. Go to the list settings page to delete these fields" while accessing website pages

We have a publishing website in SharePoint 2010. There are total 4 environments - Development, Test, Stage and Production. For some enhancements, we had to create some new lists and libraries. When we moved changes from Development to Test environment, everything
worked fine. Relevant lists and libraries in lower environments were saved as templates (in .stp format) including content, imported to higher environment, lists/libraries were created in higher environment using imported templates.
Things worked fine from Development to Test. We did similar exercise from Test to Stage environment. Now in Stage, when we access some pages, we get error message - "One or more field types are not installed
properly. Go to the list settings page to delete these fields.". ULS logs don't tell which exact list has got problems.
On searching for this error, I got many articles that explain how this could happen when we migrate from SharePoint 2007 (MOSS) to 2010. Though our case different (as all our environments are in 2010), we still tried following steps.
De-activate 'SharePoint Server Publishing Infrastructure' Site Collection feature
Go to https://site-name/relationships%20list/allitems.aspx. This is a hidden list. Delete this list.
Re-activate 'SharePoint Server Publishing Infrastructure' Site Collection feature.
Make sure that new hidden list with one item is created at https://site-name/relationships%20list/allitems.aspx
However, this didn't help as we are still getting same error message. Appreciate if someone can suggest how this issue can be resolved.
Following are ULS logs:
Unable to execute query: Error 0x81020014
One or more field types are not installed properly. Go to the list settings page to delete these fields.
System.Runtime.InteropServices.COMException: One or more field types are not installed properly. Go to the list settings page to delete these fields.
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback,
ISPDataCallback pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
at Microsoft.SharePoint.Library.SPRequest.GetListItemDataWithCallback2(IListItemSqlClient pSqlClient, String bstrUrl, String bstrListName, String bstrViewName, String bstrViewXml, SAFEARRAYFLAGS fSafeArrayFlags, ISP2DSafeArrayWriter pSACallback, ISPDataCallback
pPagingCallback, ISPDataCallback pPagingPrevCallback, ISPDataCallback pFilterLinkCallback, ISPDataCallback pSchemaCallback, ISPDataCallback pRowCountCallback, Boolean& pbMaximalView)
Thanks!

Hi Shrishail ,
Some time this issue occurs if you have any custom filed types in the list or library and that field type is not installed on server .
Can you please check that if you are having any custom field types column on the list and library and if that is the case you need to install that field type on the server. sometimes it happens if field types are not properly deployed / Installed then
you have to uninstall that field types (retract solution) and deploy it again.
Thanks,
Ujjwal

Do i need to install a v-ram in the ram bit of my emac ?

Similar Messages

Maybe you are looking for