Do I need to install my software apps before restoring an image backup? Getting error message of can't restore due to permissions
I get an error message when restoring an image that the restore failed - operation not permitted. I do not have "erase destination" checked. It was running for over an hour and then about half way through gave the error message.
I'm verifying the image as I type this. For the image to load successfully, do I need to have all the software installed already, like MS Office and other third party software for macs? Kind of reaching for a green limb at this point. I recently had to reinstall the OS due to a hardware issue and it has been running fine since the chips were swapped out. I updated the MAC OS with software updates after the hardware work was completed. Today I decided to restore the image backup using disk utility. And here we are. Tips, etc., would be greatly appreciated.
Tried it again. Didn't work. But it's now clear to me that Lenovo R&R is failing to recognize the recovery disk that it created earlier today. R&R said the recovery media was successfully created, but I guess not.
I will try installing from a Win7 installation disc. Thanks for your help.
Similar Messages
-
Keep getting error message "FCE" can't install on this disk. A newer version of this software already exists on this disk. Have remove all FCE elements with no success.
http://www.digitalrebellion.com/fcsremover/
-
I had my hard drive cleaned and cannot install cs6 master collection from disk. I am getting error message failed to initialize. please download adobe advisor support. I am using a pc and have windows 8. Please help.
start at the top and work your way down applying applicable fixes until your problem is resolved.
if cc (win): https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html
if, your error is:
"Installer failed to initialize. File not found." or "Installer failed to initialize. This could be due to missing files."
first, rename OOBE Folder to OOBE.old.
to find OOBE:
64 bit win OS: Program Files x86\Common Files\Adobe\OOBE
32 bit win OS: Program Files \Common Files\Adobe\OOBE
mac os: HD>library>application support>adobe>caps
mac os: USER>library>application support>adobe>OOB
if that fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.
if you're using a dvd to install:
copy the disc contents to a desktop directory and install from that directory.
if you're using a mac:
1. Try to Create a new user account in Mac with Administrator Priviledges.
2. Login to the New user, Navigate to Mac HD> Application> Utilities> Adobe Installer folder, Locate products like Adobe Reader, Adobe Flash, Adobe Air and un-install them
3. Navigate to User Library> Application Support> Adobe and move Adobe to Trash.
4. Navigate to Mac HD> Library> Application Support> Adobe and move Adobe to Trash.
5. Start the installation again.
if everything applicable above fails, check your installation logs:
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-install-using-logs-elements.html -
I keep losing entire catalogs. I put in 30,000 images and cannot get to them. Put in 3,000 images and get error message "Light room encountered error when reading its previous cash and needs to quit. light room will fix this problem the next time it loads.'
I have loaded light room several times and even exited computer for 8 hours. Still get error messageA search of this forum shows lots of threads where this issue of "error reading cache" is solved
-
Trying to install iTunes for Windows Vista. Says "successfully installed," but when I try to open iTunes, I get error messages, "unable to locate componant AVFoundationCF.dll not found," then "Error 7 Windows error 126." I have tryed to reinstall twice with the same result.
Repair Apple Application Support.
START/CONTROL PANEL/PROGRAMS N FEATURES/highlight APPLE APPLICATION SUPPORT, then click the REPAIR button -
While updating iphone software to 5.0.1, I am getting error that Iphone could not be updated because the firmware file not compatible.
Can anyone help me to resolve this issue.Using iTunes 10.5.2.11 on a PC running 64 bit Windows 7
First did a full back up of iphone using iTunes
Put iphone into Recovery Mode ( http://support.apple.com/kb/ht1808 ). Erases all user data and settings!
Disconnected USB cable from iphone
Powered off iphone by holding down Sleep/Off button until slider appeared, slid to off, waited until screen dark
Pressed and kept holding Home button while plugging cable back into phone
I still saw the graphic on the iphone that said to plug into iTunes, so I unplugged and re-plugged cable. (I may have released the Home button too soon)
Recovery Mode alert came up in iTunes.
Followed all iTunes prompts to restore phone - it downloaded and sucessfully installed iOS 5.0.1
iphone did not appear in iTunes due to missing pairing file (that made me nervous)
iphone was now at factory settings. I followed prompts on iphone screen to start reactivation process
Eventually the iphone asked if I wanted to restore from a back-up (whew!)
A window opened in iTunes and I was able to select my previous back-up file for the restore
A full restore from back-up then occured
I also allowed a carrier settings update to occur when prompted (not sure that happens in all cases)
When the restore was done I had to re-enter some passwords, but everything was there
iOS is now 5.0.1 (9A406). The whole process took about an hour. -
When I try to install the latest version of iTunes, during the installation I get error messages saying that a program is trying to change registry and the installation is stopped.
After this happens the only way that I can open iTunes is to do a 'system restore' to an earlier time.
Has anyone else experienced this and can you help?Could you please post the exact text of the error message or provide a screenshot?
There is advice on issues with the update at Troubleshooting issues with iTunes for Windows updates. One of the entries in the further information section refers to a possible registry permissions problem which might be what you are seeing.
tt2 -
We bought Premiere Elements 10/Photoshop Element 10 a while ago and it worked brilliantly on our Window XP machine, but since we moved to Windows 7 last year we can't get Premiere Elements 10 to work properly and always get the error message 'A reduced set of content (Instant Movie Themes, Title and Menu templates, etc) has been installed. You can install the full content by inserting your Content DVD or downloading it. Do you want to install now?'. So I've tried reinserting the DVDs and installing them. I've uninstalled all the software and started again, but each time I get the same message at the end of the process. I've spoken to the computer shop I bought the computer from and they say Windows 7 is incompatible, but that doesn't seem to be what the Adobe web site says. Please, any advice welcome as I've got a year's worth of videos I need to edit.
Thank you!
Adobe Premiere Elements 10.0
Windows
2 GHz or faster processor with SSE2 support; dual-core processor required for HDV or AVCHD editing and Blu-ray or AVCHD export.
Microsoft Windows XP with Service Pack 2, Windows Media Center, Windows Vista® (all applications run native on 32-bit operating systems and in 32-bit compatibility mode on 64-bit operating systems), or Windows 7 (Adobe® Premiere® Elements Editor runs native on 32-bit and 64-bit operating systems; all other applications run native on 32-bit operating systems and in 32-bit compatibility mode on 64-bit operating systems)cathyj
Are you working with Windows 7 32 bit or 64 bit? What video card/graphics card does your computer use? NVIDIA GeForce? And, are you doing your download and installing with antivirus and firewall(s) disabled?
Premiere Elements 12 is compatible with Windows 7, 8, or 8.1 64 bit.
If you have tried to obtain the Premiere Elements 10 Content from the installation disc labelled for Content for your version and operating system and that is not working, then can try downloading and installing the Content from the following Adobe link if you do not decide to click on the message to initiate the content download from within the program.
http://www.adobe.com/special/premiereel/downloads/
We will be watching for your progress.
ATR -
How can I get rid of this?
With that particular variety of 1606 (it's a 1606 error message even though the 1606 error message number isn't returned by the iTunes installer), the following Microsoft document is worth a try:
You receive an "Error 1606" error message when you try to install or remove a Microsoft program -
Install ITunes on A Windows 7 64 bit and get error message
I am trying to install ITunes on A Windows 7 64bit and get the following error microsoft.vc80.crt,version="8.0.50727.4053",type="win32",publickeytoken="1fc8b3 b9a1e18e3b",processorarchitecture="x86"HRESULT:0x8007054F
Are you using the 32 or 64 bit version? There are two versions of iTunes. One is for 64 bit processor architecture, one is for 32 bit processor architecture.
Please download the 64 bit version and test it! In my view you try to install the 32 bit version.
Kind regards!
Philipp
EDIT: I am sure you currently try to install the 32 bit version! It doesn't work on a 64 bit system. Are you sure that you use Windows with 64 bit? -
Goes thru the update process and get error message 1645. How do I resolve this problem?
I tried doing both, I couldnt find either symantec or live update in applications or when I searched through finder. I went to the activity monitor and found symantec and quit the process but the next time i logged on to my computer, it came back. this is what the error message looks like
Thanks for trying! -
My PC crashed. I rebuilt it from scratch and tried to install my unopened copy of Elements 10. I get error message 400 when trying to open the program. Windows 8.1 64bit
if that's a network connection error, Sign in, activation, or connection errors | CC, CS6, CS5.5
-
When I try to load free apps I keep getting error message 1004. What does this mean.
When I try to load free apps on my ipad I keep getting error message 1004. What does this mean?
I have never experienced this issue, but if you can't find anything that helps on the site that Philly suggested, I have read that this has worked for that error code.
Go to Settings>Safari>Clear History, Cookies and Data or Cache. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. -
Windows needs to install driver software for your unknown device
Windows needs to install driver software for your unknown device
This is the message that i get when ever i plug in my ipod touch to my computer. the computer is running on vista. i dont know what to do, because i tried to follow the steps suggested, but it didnt work, the computer said that it couldnt find anything and to check with apple for some driver software. HELP!!!The iPod touch and iPhone do not use the same type of USB drivers that other Apple devices use. They both require Apple Mobile Device Services to be running. Using this tech article as a guide, you can easily fix this: http://support.apple.com/kb/TS1567
-
What are the components I need to install on my apps server
Hello All,
Our Oracle DB 10.1.0.3.0 is installed on Linux Server.
Oracle 10g Developer Site is installed on windows XP.
I have upgraded form & reports form earlier version 6.0..
Now I need to install Oracle Application Server on windows 2003 (x86) 32 bit.
I never done this b4.
My question is that ,
what are the components I need to install on my apps server to run Forms & Reports?
I am installing apps server on one machine.
But when I read documentation they said its better to install on two machine.
Regards,
DianaYes,
I'm sorry to tell you but for forms and reports (BI) you need to install almost everything, you need to install an infrastructure as first components, and then a midtier for AS with Business Intelligence option, in this second component you can chose to install Reports, forms, OCJ4, Portal, any other component you need or you thik you will need in the future.
You can install both in one Server if you don't have resources for 2 or 3 thinking on load balance. It works fine for me in one server but my operation is not too big.
Carlos
Maybe you are looking for
-
Manual G/L a/c incase of purchase order and migo
how to maintain manual G/L acccount for purchase document. thanks in advance with regards
-
Document set change field label for "Name"
Hi, is it possible to change the field names without changing the NewDocSet.aspx form? I'm want to change the field "Name" to something else. Thanks, Peter
-
Hi, I have a iMac 2011, and I'm trying to use the Built-in input. To play the sound from my speakers as the input/out so others can hear it. But however The M is grayed out and I cannot get it enabled. Any solutions to this problem? It's been puzzlin
-
Another using phone, hide all message content in addition to notifications
I have no problem hiding the notifications for messages on my phone. If I allow someone to use my iPhone to make a call or use Safari, how can I hide incoming messages and existing messages from the user?
-
HT204380 How can I make the screen full screen when I am calling?
How can I make the screen full screen when I am calling on Facetime on a Macbook Pro Laptop?