Do i need to install snow leopard on my new macbook pro?

i picked up a new macbook pro and it came with snow leopard. i don't know what the snow leopard will enhance and if i should even install the program.

Your MacBookPro comes with Snow Leopard pre installed. It's not a program, it's an operating system. Mac OS X - Snow Leopard.
You might benefit from viewing these videos.
http://www.apple.com/findouthow/mac/

Similar Messages

  • Can i install snow leopard on my new macbook pro

    I'm looking at a new laptop but I understand Adobe CS4 won't work on Lion, so I'd rather install Snow Leopard on the new macbook. Is this possible?

    Difficult, and even reported "success" is likely not consistent enough for your *need* for Adobe CS4.
    You can try for a unit off the refurbished list (Apple.com > Store, bottom of the left hand margin is the link).  Units from pre-July and last year can be found, and come with warranties just like brand new.

  • Can i install snow leopard on my new macbook pro which came loaded with Lion?

    My new MBP came loaded with Lion. Can i install S.L. on it?

    Don't install a version of Mac OS X earlier than what came with your Mac

  • How can I install Snow Leopard on my 15" MacBook Pro without using its DVD drive?

    How can I install Snow Leopard on my 15" MacBook Pro without using its DVD drive?

    I'm assuming your dvd drive is broken? if you have a thumb drive large enough (8GB or better), you can use another computer to make a bootable image from the install dvd to the thumb drive. then you can install from the the thumb drive.
    Ihttp://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
    that's a step by step walkthrough.

  • While installing snow leopard 10.6 on macbook pro, install begins then disc is ejected after a few minutes?

    While installing snow leopard 10.6 on macbook pro, install begins then disc is ejected after a few minutes?

    Does the disc look like this DVD?

  • How much storage do I need to install Snow Leopard onto my 2008 MacBook?

    I have a 2008 MacBook and need to install Snow Leopard to be able to connect with my ipad and iphone.
    But it keeps telling me there isn't enough storage space available. I have over 2Gb, isn't that enough?

    General requirements
    Mac computer with an Intel processor
    1GB of memory
    5GB of available disk space
    DVD drive for installation
    Some features require a compatible Internet service provider; fees may apply
    From here  >  http://support.apple.com/kb/SP575

  • Do I need to install Flash Player on my new Macbook Pro Retina

    Do I really need to install Adobe Flash Player on my Macbook Pro Retina?

    Only if you need to use websites which require it.
    (116697)

  • Can I install Snow Leopard on the latest Macbook Pros? (the ones pre-loaded with Lion)

    The problem and solution is pretty simple, I just want to know if anyone has tried this before. I have a brand new Macbook Pro that I bought more or less for the sole purpose of having a more powerful machine to run AVID Media Composer on. AVID is only compatible up to OS version 10.6.7 at the moment, and the machine I got was pre-loaded with Lion, 10.7....So I look at the support documentation Apple provides, and notice that in the nifty little chart they have, the latest line of Macbook Pros out there (early 2011) originally had version 10.6.6, so I'm assuming that's the previous version I can't downgrade past.
    To revert back to Snow Leopard, however, I need to install it from the DVD which has version 10.6.3 on it, and then upgrade to any version between Snow Leopard 10.6.6 and Lion 10.7. In theory this could work, the only problem being that for a brief time between installing Snow Leopard and updating to the version of it that I need, the computer will have version 10.6.3 on it.
    Now I'm pretty sure if the only thing I do on the computer is immediately update to a safe-to-use version, there will be no problems. However, if the machine's hardware is so terribly non-backwards compatible with the Snow Leopard OS, I may do all this backing up and reverting and not even be able to start the computer once I get the old install on it. Before I just go ahead and try this for myself, I was wondering if anyone else has, and more importantly, have you had any success?

    Hi r,
    EDIT: disregard my post. Waiting for that disc is a far better option.
    I hope w won't mind if I add a thought here:
    rmo348 wrote:
    Now I don't mind if some drivers are messed up and resolution is all funky when I install 10.6.3 on it, I just need to know if it'll be functional to the point where I can run the 10.6.6 update dmg. Once I update to 10.6.6 everything should work fine.
    Or could I install 10.6.3, have the 10.6.6 update burned to a disc, and boot straight from that? This is my first Mac so I'm not sure what little tricks work or not.
    Your first idea may work; the only way to know for sure is to try it. If you do, make sure you download and run the Combo update for 10.6.7 or 10.6.8. There can be different versions of a point update, those which are available for download, and those which ship on Macs, so you want to install one beyond that which shipped with some of the new MBPs.
    If the MBP won't boot to 10.6.3, something else to try is installing it to an external HD, then installing the 10.6.7 update on it, clone it to the MPB's internal HD, and run the 10.6.7 or 10.6.8 Combo update on it.

  • Trying to re-install Snow Leopard over Lion and Macbook Pro is beeping like a memory failure

    I installed Lion on my work 15" MacBook Pro i7 to give it a go, and it's not working with the system we use for Active Directory login, so I need to roll back to Snow Leopard.
    I don't have a Time Machine backup, but I have pulled all the data I need from the machine, and have wiped the hard disk ready to reinstall Snow Leopard.
    I have a retail copy of Snow Leopard that I've recently used successfully for fresh installs on other machines, but now once I insert the DVD into this machine that's had Lion on it, it's not responding and just making alarming BEEP BEEP BEEP noises.
    I googled that and it might be bad RAM (possible, but unlikely? the machine has been running very well up until now)
    I've wiped the PRAM, but the instructions for wiping the SMC are a bit cryptic for these machines ...
    Does anyone have any clues as to what might be causing this? A firmware issue of some sort?
    Maybe the hidden EFI partition on the drive won't let you install Snow Leopard over a disk that's had Lion?

    Might be some useful info here:
    http://forums.macrumors.com/showthread.php?t=1175934
    " I used target disk mode to install Snow Leopard on its partition. I used a friends Macbook Pro, but I put my machine into target disk mode and ran the installer from his user account and optical drive. From a couple things I read online, it seems that Apple recommends putting the other machine in target disk mode and doing it the other way around. I guess some critical files might not have been installed? I also used a retail copy of Snow Leopard instead of my grey recovery disk, so that might be it too. "
    "Your machine is newer than the retail copy of Snow Leopard. Use the restore disks it came with.
    The installation will need to be done from your machine. You may need to do a net install, so look at "Remote Install Mac OS X" in Utilities."
    I'm currently installing from the macbook firewired to the other machine as recommended so hopefully that might help

  • Anyone install Snow Leopard on a 13" MacBook Pro and have any issues?

    Just wondering if anyone is this forum installed Snow Leopard on a MacBook Pro 13" and what occured if any?
    just want to know to really think before i upgrade.... getting really tense about this after seeing all these problems that are not only happening to third party apps but to the acctual system and native apps (safari, itunes, etc) Kinda Scared... i know Apple is a great company and does great things never imagined and im a big fan for 6 years when i was little, so i was surprised to see so many problems after release...

    I am having a similar issue. I have upgraded my Mac Pro without any issues. However, my MB Pro has told me that the install was successful and was to restart. Upon restart the machine passes the initial boot (Apple Logo and Spinner) then it presents a black screen and will not complete the boot to the login screen. The fan is running, if I close the lid it tries to sleep, but does not appear to sleep. It is on and the light is solid (no pulsing for sleep).
    I booted in verbose and the messages all looked good and then it posted the last messages to fast to see and it went to black screen.
    Very Frustrating....

  • Can I install Mac OS X 10.6 (Snow Leopard) on my new MacBook Pro?

    Hi all, I'm user of Mac since lot of time and I`ve got a question. I have bought a Macbook Pro on September 2011 and it cames with Lion and no installation disc. Can I downgrade this Macbook Pro with Lion preinstalled to Snow Leopard with SL Retail disc?

    Not with a retail disc — it doesn't contain a recent enough version of Snow Leopard to boot the machine. You'll need to obtain duplicates from Apple of the discs that would have been shipped with your machine before the release of Lion. Call Customer Relations at the number below and ask to have them sent to you for a small fee.
    1-800-767-2775 (USA only. Outside the USA, call AppleCare)

  • TS1963 DMS Launch error after migration from snow leopard iMac to new Macbook Pro?

    I just purchased a Macbook Pro. I used Migration assistant to transfer my files from my '06 iMac, which was running snow leopard to the Macbook and at start up now get a DMS Launch error every time... any suggestions??
    The error message says check with the developer to make sure DMS Launch works on this version of OS X.  You may need to reinstall the application.
    I have installed all updates as it suggests, to no avail.  I keep getting the error message and report pop up box each time at start up and the only way to be rid of it, is to click ok to send the report - there is no option to stop the report from coming up.
    Does anyone have any suggestions on what I can do to stop the error message appearing and resolve the issue?
    Thanks
    Chelle

    Click Command+shift+G
    Type in the following, one by one- Then delete the **** out of them.
    /Library/LaunchAgents/com.divx.update.agent.plist
    /Library/LaunchAgents/com.divx.dms.agent.plist
      /Library/LaunchAgents/com.divx.update.agent.plist
      /Library/LaunchAgents/com.divx.dms.agent.plist
      /Library/Application\ Support/DivX/
      HOME/Library/Preferences/com.divx.*
    Also search anything "DIVX" while in library. Delete the **** out of that too.

  • Can I run Tiger and Snow leopard on a new macbook pro 15"

    Hi
    I have a Macbook running Tiger, soon to be replaced (I hope) by a
    15" Macbook Pro Sno Leopard. Can I partition the drive on the MBP to run
    Tiger also, as I have Adobe Creative Suite 2 and can't afford to upgrade that too. And I really don't want to run to computers.
    Thanks

    Welcome to Apple Discussions!
    Snow Leopard will run CS2 with some limitations.
    http://snowleopard.wikidot.com/start
    Either find a Mac older than October 26, 2007 you can use until you can bring all your software to Snow Leopard compatibility from these sites*:
    http://www.macmaps.com/usedrefurbished.html
    Or find an alternative application for the functions you need from the first link that is Snow Leopard compatible if you can use that.
    - * Links to my pages may give me compensation.

  • I have created a new partition on the Mac HD for Lion as I would like to dual boot. Do I need to install Snow Leopard on that partition before installing Lion? If so, can I use one of my Time Machine backups to do this?

    I have created a new partition on the Mac HD for Lion as I would like to dual boot. Do I need to install Snow Leopard on that partition before installing Lion? If so, can I use one of my Time Machine backups to do this?

    zoominnana wrote:
    Can I set up 2 different time capsule backups? one for the lion partition and one for the snow leopard partition?
    No, you can't partition a Time Capsule's internal HD.  Both partitions will back up to the same sparse bundle. keeping the backups for each partition separate.
    Time Machine will not take the two OSX partitions as two different computers, but for best results, exclude the Snow Leopard drive from backups on the Lion partition, and exclude the Lion partition from backups on the Snow Leopard partition.
    There may be some files on the Lion partition that Time Machine on Snow Leopard won't like, among other things.  See #10 in  Time Machine - Frequently Asked Questions for details.

  • I'm about to install snow leopard on my 2006 macbook, OSX 10.4.11. I read that I'm supposed to copy my old OS to an external drive before hand. Why is this? What does it accomplish? If I upgrade to 10.6.3, why do I need a copy of my old 10.4.11?

    I'm about to install snow leopard onto my 2006 macbook with OSX 10.4.11. I read that I should copy my old OSX to an external drive before I start. Why? What is the purpose of this? Once I have snow leopard, why do I want a copy of 10.4.11? Won't I be able to import what I need while installing?   Also, what is the point of partitioning my disk?  I don't understand what that's for if I'm only going to run one OS on there. Any experience or advice is greatly appreciated.

    It is always wise to have a copy of your latest working system ... preferably on an external drive.   As Neil says, you may run into trouble and if you do you can always return to the original situation and start again.
    Once you have installed Snow Leopard (an excellent system if I might say so) then you probably won't need 10.4.11 though you can never have enough back ups in my opinion.   It's amazing how often a need arises.
    Having a backup on an external drive allays the need to partion your hard iMac drive for the same purpose..

Maybe you are looking for

  • Hyperlinks to open in new window?

    I'm trying to set my external hyperlinks to open in a new (browser) window but haven't had any luck. I thought that the "Display in Browser" option when setting up the HTML Jump would do this, but it still opens within the help window. Can anyone pro

  • Can I convert a PDF to Word Perfect?

    I use Word Perfect x7 in court transcripts and I need to know if I can convert a PDF file to Word Perfect or is there anyway to get it to word perfect so I can proof and print after corrections made.

  • Is it possible to sort data in reading mode?

    Hi everyone, When user view WEBI reports in reading mode, are there any options or API that allow them to sort the information as their desire? User should not switch to design mode for just to sort the data. Currently, I'm on BI 4.0. Please share yo

  • Images Won't Appear in Simple Program

    I am working on a small game project and I can't get Java to draw images to the screen. I started developing on a mac, and the code worked there. I switched to my new PC, and now everything in the program executes, but the images just don't show up.

  • Design Projects

    Hello All, I'm a student doing a 'Advanced VLSI design' class, I'm looking for a design project. I came to know recently about open-sourced SPARC processor core. Are there any possible projects, in which we can contribute in terms of the Design/Layou