Do I need to keep the box for my iMac?

Hi, does anyone know if there is anything in the Apple Care agreement or any other aspect of my warranty that requires me to keep the box for my iMac, will I ever have to send it back to Apple or will they always send an engineer out to it?
The box is huge, it will not go through the hatch into the loft and I am fed up of moving it about in my garage.

Yes, I am trying to find somewhere to store it.
Is it ever likely that to get a repair for my iMac that apple would ask want it shipped back to them, in which case I would need the box?

Similar Messages

  • How can I buy a new shipping box for my iMac?

    I need a new shipping box for my iMac. Can they be purchased?

    You mean the shipping box Apple shipped the iMac with when new?
    If so, no.

  • Good morning a few weeks ago  I send the request for the replacement program of my ipod nano 1st generation and they sent me the shipping box but I did not get the label to go back,  and I can not  return it , i need to you sent me again the box for retu

    Good morning a few weeks ago  I send the request for the replacement program of my ipod nano 1st generation and they sent me the shipping box but I did not get the label to go back,  and I can not  return it , i need to you sent me again the box for return the ipod

    Best thing would be to call Apple up again, and let them what has happened and they'll help you!

  • Need to keep the expired backup for 7 days extra

    Hi All,
    I need help from you guys.
    My problem is.
    1. As per backup schedule, I have to maintain the backups for 14 days (retention period in RMAN)
    2. Now the people are asking to keep the backups for 31 days.
    3. I changed the retention period for 31 days.
    4. When I checked with crosscheck backup, it is showing the backups older than 14 days as expired.
    5. How to recatalog (keep) the expired backups.
    regards,
    Kiran

    you can see the demo here..
    Re: control_file_record_keep_time vs retention policy
    Khurram                                                                                                                                                                                                                                                           

  • How can I control the image size when I export form iphoto, the choice is too limited, I need to send a photo under 3 MB but if I choose high quaulity it is only 1.1 and i need to keep the best quaulity I can. Thanks for help.

    How can I control the image size when I export form iphoto, the choice is too limited, I need to send a photo under 3 MB but if I choose high quaulity it is only 1.1 and i need to keep the best quaulity I can. Thanks for help.

    Any image can only be as large as the Original. With a program like Photoshop you can UpRes an image and get it to a bigger size, larger files size as well, but the actual quality of the image will be degraded, depending on the UpRes system and the original quality of the image.
    iPhoto is not the program to be doing that in and I don't think it even has that option.
    So I suspect the image you are trying to send isn't much bigger than what you are getting. You can also try Exporting it from iPhoto to yopur desktop and see what size you end up with. If it is still that 209KB +/- file size then that is the size of the original image.

  • My dell inspiron 15r finds my iphone but it doesn't trigger the box for me to give the security number to tether

    When I connect my iPhone 4 to my Dell inspiron 15R the laptop recognises the phone as a personal hotspot but it does not trigger the box for me to input the code to allow tethering.  Why does this happen when my old iPhone 4 (which Apple have just replaced) did produce the box and tethering afterwards was automatic?
    Thanks in advance, Colin from Leicester, England.

    ME TOO.  NOW MY IPHONE 6 PLUS IS SAME LIKE YOU.
    iphone is diabled- connect to iTunes because i forget passcode.
    i cannot connect iTunes because it's always asking to enter passcode on iphone.
    So, i cannot make restore my iphone 6+. And then, I cann't erase "device" in icloud.
    My iphone is new. No icloud. didn't connect to itune backage.
    That's why I try to connect iTunes but it need to enter passcode.
    So, my iphone just keep "iphone is disbled-connect to iTunes".
    IPHONE 6 PLUS

  • Getting error while creating form and report on webservice: ORA-20001: Unable to create form on table. ORA-02263: need to specify the datatype for this column.

    i am using the following description to create a web service reference:
    web reference :REST
    Name :Yahoo Map
    URL :http://local.yahooapis.com/MapsService/V1/mapImage
    HTTP Method: GET
    Basic Authentication: No
    Add Parameter:
    Name       Type
    appid        String
    location    String
    Output Format: XML
    XPath to Output Parameters : /Result
    Output Parameter:
    Name       Path       Type
    Url          /text()      String
    Then i tried to create form and report on webservice:
    Web Service Reference Type: Yahoo Map
    Operation: doREST
    All the fields i keep as default
    I tick the checkbox (url)in report Parameter
    After clicking next whereever required i click create button
    I get the following error
    ORA-20001: Unable to create form on table. ORA-02263: need to specify the datatype for this column.
    Please someone help to solve this as i need to fix it urgently.

    i exported the application from apex.oracle.com and imported it to our environment
    import went fine, but when I ran the IR page I got
    ORA-20001: get_dbms_sql_cursor error ORA-00904: : invalid identifier
    evidently the problem is a lack of public execute on DBMS_LOB, which is used in the generated IR source.
    while waiting for the DBA to grant privs on DBMS_LOB, changing the dbms_lob.getlength call to length() fixes the IR.
    however, i am not getting the download link on the associated form page... changed templates, that's not the issue -- we'll see if that's a dbms_lob issue as well

  • APEX:Getting error while creating form and report on webservice: ORA-20001: Unable to create form on table. ORA-02263: need to specify the datatype for this column.

    I am using Apex 4.2.2.00.11
    am using the following description to create a web service reference:
    web reference :REST
    Name :Yahoo Map
    URL :http://local.yahooapis.com/MapsService/V1/mapImage
    HTTP Method: GET
    Basic Authentication: No
    Add Parameter:
    Name       Type
    appid        String
    location    String
    Output Format: XML
    XPath to Output Parameters : /Result
    Output Parameter:
    Name       Path       Type
    Url          /text()      String
    Then i tried to create form and report on webservice:
    Web Service Reference Type: Yahoo Map
    Operation: doREST
    All the fields i keep as default
    I tick the checkbox (url)in report Parameter
    After clicking next whereever required i click create button
    I get the following error
    ORA-20001: Unable to create form on table. ORA-02263: need to specify the datatype for this column.
    Please someone help to solve this as i need to fix it urgently.

    336554,
    Looks like there is a 127-column limit on the number of report columns supported when using that wizard. Do you have more than that?
    57434

  • Migrate Active Directory 2008 to 2012 but need to keep the same ip address and server name

    Hi,
    Current setup is 2 DCs in one site running 2008 R2 AD.
    We are planning to migrate from 2008 R2 to 2012 R2 but need to keep the same ip address and server name. I have came up two plans to do this and hope someone can tell me which one would be the best approach. What is the pros
    and cons in Plan A and B or may be plan C if there is a better one?
    First, I was planning to do plan A but just had a second thought of Plan B.  My concern in Plan A is about changing the server name when the new 2012 R2 already running as DC.  Plan B would be changing all the old server
    name and ip before they become member sever and DC. 
    Any information and suggestion would be very appreciated.
    Plan A
    Run adprep /forestprep on 2008 R2 DC
    Build a new 2012 R2 server and promote it as 3rd DCs in current Domain
    Transfer FSMO from 2008 R2 to 2012 R2
    Run Repadmin /syncall to force replication
    Rename the demoted 2008 R2 DC to something else
    Change the demoted 2008 R2 ip address to something else
    Restart the demoted 2008 R2 server to take effect
    Now, run Netdom computername command to change the new 2012 R2 server name to the old 2008 R2 DC server name
    Change the new 2012 R2 DC's ip to old 2008 R2 DC's ip
    Run ipconfig /flushdns
    Run ipconfig /registerdns
    DCDIAG to see any error
    Plan B
    Build 2 new 2012 R2 standalone servers
    In 2008 R2 ServerA transfer FSMO to 2008 R2 ServerB
    Demote 2008 R2 ServerA to become member server
    Rename 2008 R2 ServerA to something else and change the ip address to something else and shut it down
    Now, rename one of the new 2012 R2 standalone server to the old demoted 2008 R2 ServerA name
    Change the new 2012 R2 standalone server ip to the old demoted 2008 R2 ServerA's ip address
    Add the new 2012 R2 standalone server (now with the old 2008 R2 ServerA name and ip) to become member server
    Run adprep /forestprep on the 2008 R2 ServerB
    Promote the new 2012 R2 (now with the old 2008 R2 ServerA name and ip) as DC
    Transfer 2008 R2 ServerB FSMO to the new 2012 R2 DC (now with the old 2008 R2 ServerA name and ip)
    Demote 2008 R2 ServerB as member server
    Rename 2008 R2 ServerB to something else and change the ip address to something else and shut it down
    Now, rename the 2nd new 2012 R2 standalone server to the old demoted 2008 R2 ServerB name
    Change the new 2012 R2 standalone server ip to the old demoted 2008 R2 SeverB 's ip address
    Add the 2nd new 2012 R2 standalone server to become member server
    Promote it as DC
    Run DCDIAG to check error
    Thanks.

    Hi,
    Renaming a Domain Controller is a risky operation which may lead to issues, therefore, I would suggest you go with the Plan B, rename the server before it becomes DC.
    Here is a blog below which could be helpful to you:
    Remove an Old DC and Introduce a New DC with the Same Name and IP Address
    http://blogs.msmvps.com/acefekay/2010/10/09/remove-an-old-dc-and-introduce-a-new-dc-with-the-same-name-and-ip-address/
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]

  • Oracle Linux 5.6 - Do I need to keep the xen kernel  ?

    I am using the Oracle Linux 5.6 kernel 2.6.32-100.26.2.el5  also know as the UEK Release 1 in an OVM x86_64 environment.
    Question: Since the Guests are paravirtualized and require Xen specifc I/O drives ( network, disk, etc. ) does that mean I need to keep the Xen kernel rpms, i.e.,
    kernel-xen-2.6.18-238.0.0.0.1.el5
    kernel-xen-devel-2.6.18-238.0.0.0.1.el5
    and this entry in /boot/grub/grub.conf
              title Oracle Linux Server (2.6.18-238.0.0.0.1.el5xen)
              root (hd0,0)
             kernel /vmlinuz-2.6.18-238.0.0.0.1.el5xen ro root=LABEL=/ numa=off
             initrd /initrd-2.6.18-238.0.0.0.1.el5xen.img
    The main driver for this question is I am trying to determine if these rpms are accessed in any way when the UEK Release 1 is in use. If so, then I will need
    to heed to the Security Scan results against the xen kernel version  otherwise I will ignore them and move forward.
    Thanks
    Mark E. LLoyd
    Data Center Technology
    Accenture

    The following is from the OL 6.5 release notes:
    https://oss.oracle.com/el5/docs/RELEASE-NOTES-U6-en.html
    Hardware virtualized guest with kernel-uek-2.6.32-100.35.1.el5uek and higher
    Unbreakable Enterprise Kernel version kernel-uek-2.6.32-100.35.1 adds support for paravirtualized drivers in a harware virtualized guest on Oracle VM. Starting this kernel version hardware virtualized guests which are not configured to use paravirtualized drivers will need an additional kernel boot parameter "xen_emul_unplug=never" in /etc/grub.conf:
    kernel /vmlinuz-2.6.32-100.35.1.el5uek ro root=/dev/VolGroup00/LogVol00  xen_emul_unplug=never
    With kernel-uek-2.6.32-100.35.1 and higher, the default is to present only paravirtualized drivers when running in a hardware virtualized guest on Oracle VM. Adding this kernel boot parameter makes the kernel also present the emulated drivers as it did before (e.g. the 8139cp network driver may no longer load if this parameter is not set).
    Older version of Unbreakable Enterprise Kernel do not have support for hardware virtualized guest that uses paravirtualized drivers (PVHVM).

  • I updated to cc2014, do I need to keep the cc version?

    Hello Everyone,
    I updated to cc2014, do I need to keep the cc version?
    For example, Do I need to keep Premiere Pro CC if I have Premiere Pro 2014?

    No, you can remove any older version you wish to.

  • Canon 100m f/2.8 L IS USM Macro Lens - What's in the Box for real?

    I want to purchase the Canon 100m f/2.8 L IS USM Macro Lens, and the website says the only thing in the box is the lens itself and a manual.
    I realize that at the very least the Lens Cap and Cover MUST be included, but then I called customer service to confrim the rest, and they said the contrary, "only the manual and lens, with no cap or cover".
    Obviously that was an non-conscientious rep who didn't care if the answer was accurate or not, so I need some help from those of you who are owners... or at least a BestBuy rep who is conscientious.
    Canon confirms that what is supposed to be in the box with this "L" series lens
    Lens + Lens Cap + Lens Cover + LENS HOOD + LENS POUCH (the capitalized items are included because its an "L" Series lens.
    Can someone confirm What's in the Box for real?  Does it have these items or not?
    Thanks
    Solved!
    Go to Solution.

    Hi mikewinburn,
    I definitely apologize for the inaccurate information given to you from the customer service representative you spoke to. This lens is sent to us directly from Canon, and should have everything inside their packaging that they told you would be in the box. I have no direct knowledge of what comes packaged with this lens (although I wish I did, and this is actually one of the lenses that I intend on purchasing in the near future). If Canon told you that there would be the lens, the lens cap, the lens cover, a lens hood, and a lens pouch inside the packaging then that is what should be inside the box if you purchase this lens from us. I hope this clears this up for you, but if you need any personal assistance from me just send me a private message by clicking on the link in my signature.
    Thanks for posting,
    Allan|Senior Social Media Specialist | Best Buy® Corporate
     Private Message

  • Re-install How do I keep the licenses for software such as iWork

    Hi,
    I am considering doing a reformat and installation of my MacBook Pro. It came with Tiger and I have purchased/installed Leopard(family version) and iWork(family version).
    How do I keep the licenses for these products and still keep the used count the same? I don't want to purchase new licenses because I had to rebuild my computer.
    Thanks

    There is no "tracking" of installations. With a "Family Pack", you have agreed to install on no more than five computers at any given time. It's up to you to honor the agreement. You can reinstall as many times as you wish or need as long as you limit your installations to five computers within your household at any given time.

  • WHAT IS THE POINT OF FOLDER IN DOCK IF YOU NEED TO KEEP THE ORIGINAL FOLDER

    Hi there,
    If I put a folder of pictures on the new Leopard dock, can I trash the original folder? I want to keep my desktop clean and just have it in the dock but I think it will just delete the folder if I do that. If this is the case, what is the point of keeping the folder in the dock if you still need to keep the same original folder on the desktop or elsewhere on your hard drive? Thanks to anyone who can hep with this!

    Daniel Avedon wrote:
    If I put a folder of pictures on the new Leopard dock, can I trash the original folder? I want to keep my desktop clean and just have it in the dock but I think it will just delete the folder if I do that.
    If it behaves as in Tiger, then the folder will indeed be deleted.
    If this is the case, what is the point of keeping the folder in the dock if you still need to keep the same original folder on the desktop or elsewhere on your hard drive?
    If the folder is on your desktop, then it's rather easy to access, but if it's buried on your hard drive, you my not want to open a Finder window if you need to access it regularly. Basically, placing a folder in the Dock creates an alias (shortcut) to the folder. But if you place the folder in the Dock and move the actual folder to your documents folder (for example) instead ot trashing it, your desktop will still be clean, and you'll be able to access your folder easily. IMO, it's not that bad…

  • How can I view my pictures that were backed up to iTunes? I no longer have an apple product but need to view the pictures for very important reasons.

    How can I view my pictures that were backed up to iTunes? I no longer have an apple product but need to view the pictures for very important reasons.

    If you mean backed up as part of an iPhone backup in iTunes?  If so, you would have to use 3rd party software to extract them from the backup, such as iPhone Backup Extractor.

Maybe you are looking for