Do i need to let the video finish encoding before i burn?
I want to burn a dvd in idvd. I know it begins to encode while you're still working on the dvd, but if i finsh editing the dvd and it hasnt been fully encoded in the project info tab, can i just burn it and encoding will hapen durig the burn or do i have to wait til encoding is done.
Hi
Burn - will cont. the encoding process - Can not burn until calculated.
BUT - There is another more recommended way to do this - as problems can occur
• Start in iDVD when Lay-out/Menus and all is done WITH - Save as a DiskImage
• Test this (when calculated) - with DVD-tool to see that all menus plays as intended and all Chapters starts where they are supposed to do etc.
• Then either
- Let iDVD burn (will do a re-calculation = takes much time) - or -
- Burn the .img by using - Disk Util tool - Will make a DVD-copy and need no re-calculating
BUT - both in iDVD and Disk Util tool - SET down Burn speed to x2 or x4 to get a much better DVD (less burn errors)
To get best possibly result (to me) I do
• use Verbatim DVDs - Cheap brands usually works for Data-DVD - BUT NOT AS Video-DVDs
• DVD-R - as they play on more and even older DVD-players (never DVD+/-RW)
Yours Bengt W
Similar Messages
-
Ive recorded a test video with audio/music playback slowed down 65% what speed do I need to speed the video back up to to get it into "real" time?
If I'd slowed the audio playback down 50% I would make the video 100% faster.
If I'd slowed the audio playback down 100% I would make the video 200% faster.
So its obviously somewhere inbetween speeding up by 100-200%
Sorry but its melting my brain today and I cant remember the calculation.
thankshey all
Thanks for the advise on this. I will explain a little more what am have/am intending to do.
I have used Audacity to slow the song down (Effect>Change Tempo)
Audacity will allow me slow the original song down by up to 99% (Or anything in-between up to 3 decimal places)
Unfortunately I am working to a time restraint of 12 minutes per clip (as my DSLR will only allow up to a 12 minute clip).
The song at normal speed is 4 minutes long.
Originally I slowed the audio down by 50% (Making the audio 8 minutes long), lip synced to it using a rasta blaster and recorded the video using my DSLR at 720p 50fps.
I then imported the video and audio I had been lip syncing to into FCPX.
I sped up the video by x2 (equivalent to speeding it up 200%)
Retime>Fast 2X
Layered the PROPER normal speed audio back over the top and all was fine.
Test video complete.
(You can ignore the 65% slowed down audio I mentioned earlier if you like, that was just an example of a slower than 50% audio test)
Firstly what I really want to do is to be able to slow the AUDIO down as much as possible (But still within the restraints of only being able to adjust FCPX retiming within a whole 1 percentage in the final video edit), but have the AUDIO of the song as near to/under 12 minutes as possible.
I will then re-record the video again to this new slowed down audio.
Secondly I will speed up the video from 12 minutes to 4 minutes.
Thirdly I will layer the correct 100% Normal AUDIO on top.
The FINISHED video should then look like everyone is wizzing around at high speed but the guitar playing/lyrics look like they are being played/sung at the normal speed.
Whatever happens (due to the constraints of FCPX) I need the calculations to work so that FCPX is retimed exactly to a whole 1% for the final video to sync up correctly.
So what I need to know in a nut shell is:-
What calculation do I use to work out the percentage to slow a 4 minute song down to a 12 minute song?
What calculation do I use to work out the percentage of how much I need to then speed the 12 minute video up to turn it back into a 4 minute video?
My mind is melting -
Help! I have an Adobe Premiere Pro CC 2014 sequence @ 59.94 fps and need to export the video as 23.976 but the final video render looks glitchy! Please Help!
I made a new sequence at 23.976 and imported my 1280x720 59.94 video into the sequence... when i rendered it out it looks glitchy!
my client is not allowing 1280 x720 59.94 video files they want 29.97 progressive,25,24,or 23.98
Please Help what do i do! where did i go wrong! this is horrible omg!!!! please help!
Thank you!Nice!
In my export setting i switched the frame rate to 29.97 and it looks good to me!
Thank you! -
hello, I need to download the videos made with Ipad on a USB stick. How do I make them visible then with a Windows PC? I need to transform. Mov in that format? How to make? thanks
The camera connection kit can only be used to import photo/video files from a camera, SD card or USB flash drive. You can't import other types of files. You can't export any type of files using the camera connection kit.
How to Transfer Photos from an iPad to a Computer
http://www.wikihow.com/Transfer-Photos-from-an-iPad-to-a-Computer
Importing Personal Photos and videos from your iOS device to your computer.
http://support.apple.com/kb/HT4083
Cheers, Tom -
I can't find a definite answer anywhere regarding whether or not you need to turn the iPad mini off before charging. So my question is should I turn the iPad mini off or leave it on before charging? Thanks in advance.
I rarely if ever turn my iPad off. I charge it when the battery is low or at night while I'm sleeping. Even then I close the Smart Cover and let it sleep but I do not turn it off. It doesn't matter when you charge the iPad.
The most efficient way to charge the iPad is to use the charger that came with it and plug that into a known good wall outlet. -
How can delete my account balance of 1.02$ (from gift card) since I want to purchase new apps/items with my credit card. I can't use it anymore since I no longer have the code(lost it) and when I use my credit card, it always mention that I need to redeem the 1.02$ first before I can change to another form of payment
Click here and request assistance.
(66529) -
Daughter's iPod touch went through the washer. Do i need to take the back off somehow before I try putting it in rice?
No. Just put it in rice as is.
You may have success in getting it to boot after using the rice technique, but it will sincerely doubtfully never fully function again. -
What software which i need to operate the adobe media encoder?
please help me. i have make a movie in adobe premiere pro cs4, but i can't export it. i have download adobe media encoder, but it can't work. then i download adobe support advisor and adobe manager, but the adobe support advisor shows this : "Inspection could not identify any issues. Please contact Adobe Support for further assistance. http://www.adobe.com/support" after i click run in diagnose creative suite product installation.
what software which i need to operate the adobe media encoder?
how to use the adobe support advisor?
please help me, i have chat the adobe contact support, but they say that i must talk to technician. i need this movie. this is my first project. please helpMore information needed for someone to help
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679 -
Should I let the battery run down before charging my iPad or iPhone or iPod Nano to help the battery last longer? I took a class at Verizon and they said let it drain completely and it would last longer. Thanks
The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom -
HELP!!!! Sony DVD camcorder, i need to edit the video on iMovie
hi, im using my friends Sony DVD camcorder for a project and i need to somehow edit the video on my mac using iMovie, but the video files arent opening with quicktime or iMovie. the tag on the icon is .VOB
can anyone help me figure this out??im using my friends Sony DVD camcorder for a project and i need to somehow edit the video on my mac using iMovie, but the video files arent opening with quicktime or iMovie. the tag on the icon is .VOB
VOB files are "muxed" MPEG and as such are not compatible with QT. Even if you have the QT MPEG-2 Playback component ($20) installed, QT is not "natively" compatible with AC3 audio. Basically you have to options:
1) Get iMovie '08 to do a "Camera Import" which will convert the AC3 audio to Linear PCM and stor it in an MOV file container and then modify the MPWG-2 content effectively turning it into a Motion-JPEG and merge the modified video to the same MOV file container with start and/or end offsets to minimize drifet between the two.
2) The other option is t copy the non-zero VOB title sets to your hard drive and then use an MPEG-based, third party converter like iSquint (free), MPEG Streamclip (free) with the QT MPEG-2 Playback component ($20), FFmpegX (donation-ware), Visual Hub (pay-ware), etc. to converte the VOB files to an "edit" compatible iMovie '08 (or eariier version) compression format. -
How to automatically let the video getting scaled when the browser changes size
Hi,
I'm using a f4v file with dimension 1200x720 and I might upload a 1920x1080 version.
You can see it at work on www.etmotionpictures.com
I want to the movie to automatically (down)scale in the browser.
So when I resize the browserwindow and refresh the page, I thought the movie would be resized to the new dimension of the browser-window but it didn't do it.
Maybe I misunderstood what scalemode=letterbox is doing.
By the way I used to generate the code and then paste it in a html file.
Here is the code:
I just realized it might have something to do with the fact that the width and height are added in the parameter and at the beginning when the object is declared. Do I need to change that in order for the video to automatically scale.
Thanks for any help.
I really appreciate it!!!
Regards,
Gosa
ps: sorry for my english but I'm not a native english speaker. thanks for understanding.Hi,
Thanks for helping me on the right track.
I used swffit to accomplish what I wanted.
Here is the link: http://swffit.millermedeiros.com
Here is the code I used for anyone who want to do the same thing:
<script type="text/javascript" src="swfobject.js"></script>
<script type="text/javascript" src="swffit.js"></script>
<script type="text/javascript">
/* swfobject.embedSWF("example.swf", "my_flash", "550", "400", "8.0.0"); */
var flashvars = {};
var params = {};
params.bgcolor = "#000000";
params.menu = "false";
params.quality = "high";
params.scale = "no_scale";
params.bgcolor = "#FFFFFF";
params.allowFullScreen = "true";
params.AllowScriptAccess = "always";
/* params.movie ="http://osmf.org/dev/1.5gm/StrobeMediaPlayback.swf"; */
flashvars.src="http%3A%2F%2Fwww.etcmotionpictures.com%2Fetc.f4v";
flashvars.playButtonOverlay="false";
flashvars.controlBarMode="none";
flashvars.controlBarAutoHide="false";
flashvars.autoPlay="true";
var attributes = {id: "my_flash"};
swfobject.embedSWF("http://osmf.org/dev/1.5gm/StrobeMediaPlayback.swf", "my_flash", "800", "450", "8.0.0", "", flashvars, params, attributes);
swffit.fit("my_flash"); //Since v2.3 swffit use the same size of swfobject by default (but you can set a new size if you want)
</script>
And of course a div tag in the body:
<div id="my_flash"> </div>
Greets,
GoSa -
Yea for the videos, I want to put some Red vs Blue videos on there. And so dar the only way that I see how to put them on there is to buy quicktime 7 pro. Cause it says you have to export them into Itunes. Is there any other way to do it because when I try to update my ipod with the Red vs Blue videos on my library list. It says," Some of the videos in your iTunes library, including the video [video name here], were not copied to the iPod [name of your ipod here] because they cannot be played on this iPod" It confused me when I have the fifth generation iPod.
Voden,
A quick search would have answered your question, as it gets asked about a dozen times a day.
Anyway, the iPod only supports 2 codecs for video, MPEG4 and H.264. On top of that, it needs to conform to the pixel dimensions and bitrate that the iPod will support as well.
Since you're on Windows, you can use Videora iPod Convertor to convert the videos to the correct format.
To use Videora iPod Convertor to convert movies for use on your iPod, consult these helpful links:
To get started: Videora iPod Convertor Guide
If you have questions: Videora iPod Convertor Frequently Asked Questions
If you have more questions, post them here: Videora iPod Convertor Forum
Note that Videora iPod Convertor is a 3rd party program. If you need help with it, post your question there. -
Hello, I have adobe premiere element 9. I have never been able to upload a clear video to youtube. Great before, a pixel mess once uploaded. I have try all the different set up, some are a bit better but far from being nice to watch. I have a gopro, movie are taken in HD and a fairly new panasanic video, also HD. If I upload straight from the gopro movie (not using adobe) the video is great on youtube. I try to save the finished video (from adobe) on my computer, then upload it (not using adobe) still a pixel mess. I am not an expert but I have seen some nice and clear video on youtube and I would love to be able to do the same. I recently downloaded "handbrake" and make my finished video through it...still a pixel mess. I am not sure what to do, something maybe with my set up, the rendering....I have no idea.....
Any help will be very appreciated
Thanks in advancepajero io
What computer operating system is your Premiere Elements 9 running on?
Pick a video source and let us stick with it through the troubleshooting.
What are the properties of the source file
Video Compression
Audio Compression
Frame Size
Frame Rate
Interlaced or Progressive
File Extension
Pixel Aspect Ratio
Duration
What have you been setting as the project preset for this video?
What is the file size and duration of this upload to YouTube from within the Premiere Elements project?
If you export the Timeline to a file saved to the computer hard drive and then upload that file to YouTube at the YouTube web site, what are
all the Premiere Elements export settings for the saving of the file for uploading later to YouTube?
That is a lot to be asking. But the answers will be in the details.
Please review and consider and then we will decide what next to solve this issue.
Thanks.
ATR -
I am trying to up load videos that I have taken on my IPod to my photo stream. I need the videos to some how be uploaded automatically so I can get them to my PC. I have Windows 7 operating system. I cannot add the videos to the photo stream folder because I took them before I added photo stream to my IPod. I have already downloaded the icloud control panel 2.0 to my PC and have the settings set on both of the devices. I don't know if I can't upload them to photo stream or if I can use something else? Please help. My daughter takes lessons everyday and we have to be able to get them to my IPad, PC and other devices. Thank you.
Only photos can be uploaded to Photo Stream.
No videos. -
I need to obtain the size of file before the send to server
Hello,
I need to obtain the size in bytes the a internal table before the send to server, I use the DESCRIBE sentence but is not allowed me to obtain this value, that sentence I need to use.
Thanks in advance,
DLIf you are on release 620, have a look at class CL_ABAP_MEMORY_UTILITES method GET_MEMORY_SIZE_OF_OBJECT. It will tell you how much memory is allocated and how much is actually used. Here is some sample code:
TABLES: sflight.
DATA: isflight TYPE TABLE OF sflight.
SELECT-OPTIONS: carrid FOR sflight-carrid.
SELECT * FROM sflight INTO TABLE isflight
WHERE carrid IN carrid.
DATA: size1 TYPE abap_msize,
size2 TYPE abap_msize,
size3 TYPE abap_msize,
size4 TYPE abap_msize,
flag1 TYPE char128,
size5 TYPE abap_msize,
size6 TYPE abap_msize,
flag2 TYPE char128,
flag3 TYPE char128.
TRY.
CALL METHOD cl_abap_memory_utilities=>get_memory_size_of_object
EXPORTING
object = isflight
IMPORTING
bound_size_alloc = size1
bound_size_used = size2
referenced_size_alloc = size3
referenced_size_used = size4
is_part_of_non_trivial_szk = flag1
szk_size_alloc = size5
szk_size_used = size6
low_mem = flag2
is_in_shared_memory = flag3.
ENDTRY.
WRITE: / 'Size of Bound and Allocated Memory:', size1.
WRITE: / 'Size of Bound and Used Memory:', size2.
WRITE: / 'Size of Referenced and Allocated Memory:', size3.
WRITE: / 'Size of Referenced and Used Memory:', size4.
WRITE: / 'Strongly Connected Component of Object:', flag1.
WRITE: / 'Size of Allocated Memory of SCC:', size5.
WRITE: / 'Size of Used Memory of SCC:', size6.
WRITE: / 'Flag, whether only bound_size_* are filled due to mem.short.:', flag2.
WRITE: / 'Flag, whether ONJECT is in the shared memory:', flag3.
If you aren't on 620 or don't need to be that precise, you might try the following:
DESCRIBE TABLE isflight LINES size1.
WRITE: / 'Number of Lines:', size1.
DATA: wa_sflight LIKE LINE OF isflight.
DESCRIBE FIELD wa_sflight LENGTH size2 IN BYTE MODE.
WRITE: / 'Size of one Line:', size2.
size3 = size1 * size2.
WRITE: / 'Total Size:', size3.
Please note that the addition IN BYTE MODE only works in 610 and higher. It isn't neccesary before that release. However it is important to get accurate resuls in an Unicode System.
Maybe you are looking for
-
Add Datafile in Logical Standby Database
Hi, I have add one datafile in our primary RAC DB. We had logical standby database with file management is equal to manual. Both the primary RAC and logical standby db have the different storage structure. When the archive applied on the logical stan
-
Connecting Ipod Shuffle to windows
I give. When I try to connect my Ipod shuffle 2nd gen. to my computer (dell running windows xp) it shuts down and re-boots the computer every time. I charged the Shuffle off line with a 120V plug in charger that didn't help. Other devices I.E. thumb
-
Dbms_xmlgen.newcontext query from multiple tables and ||
I have two questions How do I get a dbms_xmlgen.context to query from multiple tables? I have been able to make it work with using one table only, but not with multiple tables. And how to get the || (concat) to work within my query for my output to a
-
Can anyone help with a TextEdit quirk...
I can't seem to figure out how font sizes work on TextEdit. Standard busines letter font sizes (like size 12) look normal on my computer screen, but are printing out super small, like impossible to read small. If I want it to look like standard lette
-
I've been following the following thread very closely in light of how many iBook owners are having the same problem. I bookmarked it and have been checking back regularly. Now, the link brings up an error message: http://discussions.apple.com/thread.