Do I need to load nano s/w. I have 20 GB iPod

hi folks
Just bought my wife a new nano. I have, I believe, a 2nd gen. iPod (20 GB) with all updated software for iTunes and this particular iPod.
#1. Do I need to load the nano s/w on our iBook too?
#2. Also, I use a FW cable to update my 20 GB iPod. Should I just use the USB cable with the new nano and not attempt to use the FW?
thanks
Chuck and Elaine

Your Nano should work just fine with the software you have installed, from what you say it appears to be the latest downloads.
You can only update the nano over a usb connection however it will charge by firewire.

Similar Messages

I had to replace my hard drive in my iMac iSight and now I need to load an os all I have is my windows laptop any help?

I just had to replace the hard drive on my iMac iSight G5 and now I have no os and have no idea where my restore discs are i was wondering if I purchased an os from apple if there is a way I can load it onto dvd then load my iMac

You can contact Apple at 800-767-2775, give them your serial number (under the foot of your iMac) and they will, for a small fee, send you the install disc. Then buy a black retail OS from Apple or eBay.

I want to run project 2013 on parralles do i need to load on parrellles window and office i already have office for mac

i want to run project 2013 on mac i will use parrellel,
do i need to load windows on parrelllel ,i have office on mac should i load it in parrellel also

pretty sure ms see ms office for mac and ms office for windows as two separate products so you would likely have to buy it for windows too

How does it work if you have an ipod then buy a nano? Help please

Okay i have just bought a nano but I already have an ipod Im afraid to load the cd incase it wipes my origignal ipod library...what do I do? Can you run two from one library?

You do not need to load anything. Simply plug in your new iPod. It will not erase anything.
Yo don’t even need to remove the CD from the iPod box.
You should have a backup of your music anyway.
Just copy My Documents -> My Music - iTunes folder to a DVD.

I already have adobe digital editions on my mac pc and download books from the library to my android e-reader. Can I use the same digital editions on my ipad air, or do I need to load a different one onto my ipad?

I already have adobe digital editions on my mac pc and download books from the library to my android e-reader. Can I use the same digital editions on my ipad air, or do I need to load a different one onto my ipad?

Try following forum:
Adobe Digital Editions

My ipod won't show up on my computer. I have another ipod touch, that works fine. What should I do? Do I need a different ipo usb cord for the nano?

my ipod won't show up on my computer. I have another ipod touch, that works fine. What should I do? Do I need a different ipo usb cord for the nano?

iTunes never displays the iPod in the left pane?
iTunes is shipped with a "helper application" called the "iPod Service" that runs and is used by iTunes to communicate with the iPod device. This service may be disabled.
If your system is Microsoft Windows XP and you are logged in as an Administrator:
1. Quit iTunes and, if your iPod is currently connected to your computer, safely remove it using the system tray application to manage removable devices.
2. Right click on "My Computer"
3. Select "Manage"
4. In the "Computer Management" window, left pane (tree view), follow this path:
+Computer Management (local) > Services and Applications > Services+.
5. In the right pane, scroll down to "iPod Service" and double click it.
6. If the service is listed as "Disabled" and "Stopped," change to "Manual" and "Start" it. ("Manual" will cause it to start when iTunes starts and "Start" starts the service right now.)
7. Close "Computer Management"
8. Restart iTunes and wait for it to completely come up.
9. Reconnect your iPod.
Does your iPod show up in iTunes?

I need to load for a historical period for sales order ? how to load it?

Hi all,
I need to load the data for the historical period. Say 012.2008 month data. I have deleted the set up tables and trying to reload the setup tables.
but i can find the calendar year, month nor fiscal period.
i can see only sales document number along witht the company code.
How to identify the sales document number for 012.2008 from r/3 and run the setup tables.
Pls help me on this!!
Thanks
Pooja

Hi,
You are trying to do a historical load for 2LIS_11? In that case, check the VBAK/VBAP table, and find the document ranges based on the posting date. VBAK will give you the ranges, while putting the same range in VBAP wll give you the number of item documents that would be loaded. You would be able to split the doc ranges in that case for doing parallel setups.
Alternatively if the data volume is low, do a full setup and then put the selections in the info package itself.
Regards.

Need to load only few sales orders from ecc to bi 7?

Hi all,
there were couple of sales orders is missing for a particular day? we need to load it. there was deltas from the psa to the ods.
how to load from psa to the ods when there is deltas!. using the dtp?
what is the process to carry out loading a particular records from the psa to the ods without affectingthe deltas in bi 7?
can anyone pls help me on this!!
Thanks
pooja

Hi Pooja,
Have you loaded any data to DSO till now?
If not i hope you might be having two requests in PSA if you have done one Full & one Delta load in Infopackage??
(or) might be one if you have done only one Full Load.
Follow these steps if you have notyet loaded any data to DSO:-
Now create a DTP> right click on the DTP folder>create DTP--> here you can either select FULL or DELTA load since everything will be DELTA for the first time & all the data will be loaded.
Follow this if you already having any requests in DSO:-
You might have done FULL DTP for the first time
So now create a net DELTA DTP & Execute so that only new Delta records will be loaded.
Hope it helps!
Regards,
Pavan

I cannot get my new Ipad to be recognised in ITunes so I can Sync my library... I have re-loaded Itunes 64bit but it still comes up with an error saying that I need to load Itunes 64 bit before this Ipad will cbe recognised... any ideas?

I cannot get my new Ipad to be recognised in ITunes so I can Sync my library... I have re-loaded Itunes 64bit but it still comes up with an error saying that I need to load Itunes 64 bit before this Ipad will be recognised... any ideas?
I just found that I can't Sync my Iphone either and it gave the same error code.... it must be a ITunes problem.
Message was edited by: stephenfromwandi

chicx wrote:
This is the third time of writing this on your Apple Support Communities!
Not with your current user id.
Far too much uneccesary information in your post, which only confuses things, a vast amount!
Let's start with iTunes.
Have you updated iTunes to 11.1.5, because the previous version did appear to have an issue about seeing iPods?
With iTunes 11.1.5 installed, look in Edit/Preferences/Devices, (or use the ALT key, followed by the E key and then the F key) and make sure that the box named Prevent iPods, iPhones and iPads from syncing automatically does not have a tick in the box.
Once you have doen those two things, check to see if the iPod is seen by iTunes.
chicx wrote:
By the way, what does IOS mean? (I thought IO stood for operating system, but am flummoxed by the S on the end.
Really?
OS stands for Operating System. (In computer speak, IO means Input/Output.)
iOS originally stood for iPhone Operating System, but it now refers to the iPod Touch and iPhone. The iPod Classic, which you have listed in your profile as your iPod, does not use iOS.
I assume that you have been listening to the Podcast in your iTunes on the computer as you cannot transfer it to your iPod. It's what I'd do.

I have an iPod classic that syncs my entire library, I'd like to buy a smaller iPod, a nano maybe for the gym. Can I use the same library or do I need to set up a new library for the 2nd iPod? Is that possible? I mean for one to have 2 iTune librarys?

I have an iPod classic that syncs my entire library, I'd like to buy a smaller iPod, maybe a Nano for the gym. Would I need a 2nd iTunes library? Is that possibly, I mean for one person to have 2 iTune librarys/accounts?

Woodblock 3 wrote:
Would I need a 2nd iTunes library? Is that possibly, I mean for one person to have 2 iTune librarys/accounts?
In other words, no. You don't need another iTunes Library for your new iPod
Another iTunes Library, that's only if someone elses music is mixed in with yours and you want to create another Windows user account with their music in it.
The iTunes Library is the master vault containing all your content, from there you create playlists or smart playlists specially tailored for the smaller iPod's storage requirements.
For instance if the iPod can hold only 2,000 songs, then you create a smart playlist based upon those rules/limitation. Plus what type of music you like.
You have a incredible degree of control with smart playlists, they update automatically so you only set the conditions for what goes into them. Including content from other created playlists and smart playlists.
Then, when you hook up the smaller iPod, it has it's own sync options, "all of your music and playlists" or "only select playlists" So you use the second option to select just the smart playlist you tailored for the new iPod.
When you hook up the iPod Classic, only it's sync options are used, not the new iPod ones.
I hope I explained it better this time.

I have an iPod nano v4 or 5 and when I connect it to my Hyundai Santa Fe I get an iPod loading error message. The cable came with the car when I purchased it and the dealer was able to get it to work with his newer ipod. Please advise.

I have an iPod Nano v4 or 5 and when I connect it to my Hyundai Santa Fe I get an iPod Loading error message. The cable works with the dealer's iPod which is a newer model. The cable came with the car when I purchased it. Please advise. Thanks.

Hi Bander Bunny!
I have a couple of articles that should be able to help you troubleshoot this issue a little further. You may want to try uninstalling and reinstalling iTunes first. This has to be done in a specific manner, and this article can help you do that:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/ht1923
Another option is that you may want to try syncing your iPod nano manually. Here's is an article that pertains to manually managing the content of your iPod nano:
Managing content manually on iPhone, iPad, and iPod
http://support.apple.com/kb/ht1535
It's also possible that this issue resides with your iPod nano. Here is a website that will help you troubleshoot the iPod nano:
Apple - Support - iPod Troubleshooting Assistants
http://www.apple.com/support/ipod/five_rs/
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Where can get version 10 of Elements 10? I have bought a new PC and need to load it.

Where can get version 10 of Elements 10? I have bought a new PC and need to load it.

Refer to this:
Direct Download Links for Adobe Software
Mylenium

Lost a 2 hard drives, have 7 k photos on a touch that I need to load on IMAC with a new hard drive, how do I do it. Just never went from a Touch to iMac. I have the cable hooked up and then what, I don't want to mess up,my last chance to save 7k pics!

Lost my hard drive and also an Ipad, but have 7 k photos on a Touch that I need to load on fixed IMAC with a new hard drive, how do I do it. (There were more photos than the 7k, but they were saved on other drives, thank goodness). 7K pohotos on the Touch are no where else, must be saved! Just never went from a Touch to iMac. I have the cable hooked up and then what, I don't want to mess up,my last chance to save 7k pics! New Aperture and IPhoto on IMAC with no other photos loaded on the new hard drive yet.

I'd ask in the iTouch forum where there are more iTouch users there than here and they should know how to off load the photos. It might take a 3rd party app.
OT

Hi! I need to load a GET url that si very long. On other browsers, I can load the url. In firefox 3.6, no. There is an addons or a plugin so I can extend this limit? If yes, is possible to load automatically this addons when loading a certain page? thanks

Hi!
I need to load a GET url that si very long. On other browsers, I can load the url. In firefox 3.6, no.
There is an addons or a plugin so I can extend this limit? If yes, is possible to load automatically this addons when loading a certain page? thanks
The url is sometingh like this (this is correctly loaded, but it could be longer)

Firefox should have problems with long GET data appended to an URL (long would be over 64k).<br />
If there are problems then it is possible that an extension is the cause of that.
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

JAVA, sqlserver - Need to load an image from the sql server database

hi,
I need to load an image from the sql server database using java. I have connected to the database and getting all other records except the records for a photo (datatype = LONGVARBINARY) and Remarks (datatype = LONGVARCHAR).
I am using java and sql server db. The photo and remarks are stored in the db. and i need to show the image and the remarks fetching them from there.
I get the error :
Thread-9 org.hibernate.MappingException: No Dialect mapping for JDBC type: -1
How can I achieve this?
Thanks,
Gargi

Exactly. And are you using MySQL?
No. You are using Microsoft SQL server if I have to believe your initial post. A quick google tells me that the dialect class to use is:
org.hibernate.dialect.SQLServerDialect

Do I need to load nano s/w. I have 20 GB iPod

Similar Messages

Maybe you are looking for