Do I need to re-install 10.4 applications after installing 10.4 Server?
I have 2 new hard drives I want to put in my G4 MDD. I no longer have my original 10.4 installation disc. I have a Mac OS 10.4 Server installation discs. If I install the SERVER on the fresh blank drive will this also install the entire 10.4 applications??? Or must I get another regular OS 10.4 install disc? BTW the 2 new discs are sata and I have a new PC card and cables for the conversion to sata.
Hi
Apart from some under the hood differences, the only difference when using the Interface is the addition of a Server folder in the Applications folder. This folder will contain the applications specific to OSX Server:- WorkGroup Manager, Server Admin, System Image Utility etc. None of which you have to use if you don't want to.
Within the Applications folder (Server or Client) - assuming a standard OS Install with no additional iLife - will be all the usual applications - Safari, Mail, iTunes, TextEdit, Stickies, Time Machine and the rest. You'll also see the Utilities folder which will IIRC be the standard one you'd normally see with a client OS.
There's nothing stopping you from installing any other application you would normally install on the client OS and use it exactly as you would on the client OS.
Tony
Similar Messages
-
What components need to be installed on BO server for SAP BI BO integration
Hi All,
We have SAP BI 7 Netweaver 2004 on solaris. Also we have a BO XIR2 server on solaris for reporting on SAP BI cubes.
Please let us know what all softwares need to be installed on the BO server inorder to access the SAP BI Infocubes and BW queries from BO Universe Designer.
Also mention the order of installation of the softwares.Hello Rajesh,
I recommend to post this query to the [Integration Kits - SAP|BusinessObjects Integration Kits; forum.
This forum is dedicated to topics related to the BusinessObjects Integration Kit for SAP.
It is monitored by qualified technicians and you will get a faster response there.
Also, all SAP Kit queries remain in one place and thus can be easily searched in one place.
Thanks a lot,
Falk -
What softwares need to be installed on BO server for SAP BI BO integration
Hi All,
We have SAP BI 7 Netweaver 2004 on solaris. Also we have a BO XIR2 server on solaris for reporting on SAP BI cubes.
Please let us know what all softwares need to be installed on the BO server inorder to access the SAP BI Infocubes and BW queries from BO Universe Designer.
Also mention the order of installation of the softwares.Hi Rajesh,
The BusinessObjects XI Integration for SAP Solutions product is required to allow for connectivity between your SAP and XI environments. Please consult the Install Guide for the Integration Solution for installation instructions. This documentation can be found at http://help.sap.com
Also, you'll want to consult the Support Platforms documentation to ensure that you meet the requirements for our software. You can find this documentation at http://service.sap.com/bosap-support. -
Need help with installing Flash media server
How xan i configure my existing apache server to work with flash meda server? I dont want of install apache server coming along with the setup?
I suppose this query is duplicate of this http://forums.adobe.com/thread/877615?tstart=0 - so please refer other post for answer to your queries.
-
Need Help to Prevent DDOS at application layer to protect Web server ?
Please guide the solutions for DDOS attack. I am facing this attack and after some investigation I found some details what is up against me
Here are some details of the attack which is most similar in my situation.
In considering the ramifications of a slow denial of service attack against particular services, rather than flooding networks, a concept emerged that would allow a single machine to take down another machine's web server with minimal bandwidth and side effects on unrelated services and ports. The ideal situation for many denial of service attacks is where all other services remain intact but the webserver itself is completely inaccessible. Slowloris was born from this concept, and is therefore relatively very stealthy compared to most flooding tools.
Slowloris holds connections open by sending partial HTTP requests. It continues to send subsequent headers at regular intervals to keep the sockets from closing. In this way webservers can be quickly tied up. In particular, servers that have threading will tend to be vulnerable, by virtue of the fact that they attempt to limit the amount of threading they'll allow. Slowloris must wait for all the sockets to become available before it's successful at consuming them, so if it's a high traffic website, it may take a while for the site to free up it's sockets. So while you may be unable to see the website from your vantage point, others may still be able to see it until all sockets are freed by them and consumed by Slowloris. This is because other users of the system must finish their requests before the sockets become available for Slowloris to consume. If others re-initiate their connections in that brief time-period they'll still be able to see the site. So it's a bit of a race condition, but one that Slowloris will eventually always win - and sooner than later.
Slowloris also has a few stealth features built into it. Firstly, it can be changed to send different host headers, if your target is a virtual host and logs are stored seperately per virtual host. But most importantly, while the attack is underway, the log file won't be written until the request is completed. So you can keep a server down for minutes at a time without a single log file entry showing up to warn someone who might watching in that instant. Of course once your attack stops or once the session gets shut down there will be several hundred 400 errors in the web server logs. That's unavoidable as Slowloris sits today, although it may be possible to turn them into 200 OK messages instead by completing a valid request, but Slowloris doesn't yet do that.
Please suggest any solutions with product that can help to prevent this problem with some guidance of the feature of that product to specifically prevent this type of attack. I already a many cisco devices like ASA, IPS, Cisco guard etc. just need some guidance
An early response requested and it will be highly appreciated.Hello Haseen
Any tool will have some sort of trend/chracterstic that can be used to filter or throttle it out. Take skype for an example; even with all its complexity vendors managed to find days to detect it on the network and take corrective actions. However its always a catch-up game, developers continually work to make their applications or protocols more stealthy and the vendors have to keep up with this challenge.
So you would need to understand this trend/chracterstic of the attack, and then filter out using an access control mechanism, IMHO the most appropriate would be a web application firewall (WAF), Cisco used to have one but I think it is EOS soon:
http://www.cisco.com/en/US/products/ps9586/index.html
F5 Networks have their ASM module:
http://www.f5.com/products/big-ip/application-security-manager.html
Other vendors also have some good tools.
Please rate if you find the applications helpful.
Regards
Farrukh -
I've had MS Office:mac 2011 on my imac for around 18 months now. Outlook has just disappeared and when I find the file and open it it tells me that there is a problem and I may need to re-install it. I've just done this using the installation disc which, then said the installation had been successful.
Outlook is still not working. Can anyone please advise me on what to do next.Remove MS Office 2011 completely (here are instructions) and reinstall it.
It's not a simple or fast process but it is important to follow all of the steps in order to get all the files that Office scatters around. This will not affect your data files, only MS Office and its preferences. -
I need help to install Toolkit CreateJS for Flash CS6.
Hi,
I need help in installing CreateJS for Flash CS6. I had downloaded the Toolkit CreateJS from here: http://www.adobe.com/go/downloadcreatejs and here: http://www.adobe.com/devnet/createjs/articles/using-flash-pro-toolkit- createjs.html. When I attempted to install the extension using Adobe Extension Manager, the installation files did not have the required .zxp or .mxp files. It only had a file with a .mxi extension. Please advise. Thanks.Why installing IIS o_O?
For Installing a developer Machine just install Oracle Developer suite; for testing your forms you use OC4J ("start OC4J instance" in start menu), and you can run your forms in web; no need for a aditional webserver (don't believe there's an OC4J connector for IIS available; and if so I wouldn't use it either ;-))
For Installing a server for "productional" use install Oracle Application Server (available on otn) which comes with an Apache as webserver and all the other needful things for runnung forms on the web.
For configuring both of them just take a look at the documentations on http://otn.oracle.com
regards
christian -
Help... I need help to install a server for my form to run on web
Hi there,
I installed a New server with Windows 2003.
I have some oracle forms developed using 6i, I don't mind to convert them later.
What other oracle 10g software I need to install to have my oracle forms and reports to run on web?
I tried to install in this sequence but not working:-
1- windows 2003
2- IIS
3- Oracle Developer Suite
Then I removed IIS and installed the Oracle SOA Application server also still cannot.
What did I do wrong or what should I install (I meant by sequence?)
Please advise.
Thank youWhy installing IIS o_O?
For Installing a developer Machine just install Oracle Developer suite; for testing your forms you use OC4J ("start OC4J instance" in start menu), and you can run your forms in web; no need for a aditional webserver (don't believe there's an OC4J connector for IIS available; and if so I wouldn't use it either ;-))
For Installing a server for "productional" use install Oracle Application Server (available on otn) which comes with an Apache as webserver and all the other needful things for runnung forms on the web.
For configuring both of them just take a look at the documentations on http://otn.oracle.com
regards
christian -
I have two questions...
1) If I do a clean install on my MacBook Pro will I be able to re-install apps (FCP, Aperture, MS Office etc.) from a Time Machine backup, or will I need the original install DVDs with authorization codes? (because I don't have them)
2) Has anyone ever seen anything like this before on their computers?
The Apple Genius' were stumped by my laptop issues and said they'd never seen anything like it before and recommended I did a clean install. Below you can see my trash bin, and if you look at the "Empty" button it reads "N201" and then there's the "N39" to the left of it. You can also see these numbers over by the folder area--"SD5, SD6, SD7." But that's not all...
When I right click on items I see the numbers again. Instead of "Open with" I get "N152" and there's an "N35" and "LB1" towards the bottom.
I have no idea what's going on so I'm just going to do a clean install on my machine but I don't want to lose my apps. I don't have the original install DVDs for them anymore. If you have any suggestions please let me know. Thanks!You don't lose them. You can always redownload them from the app store after you log back in with your Apple ID.
"Buy, download, and even redownload.
You can install apps on every Mac you use and even download them again. This is especially convenient when you buy a new Mac and want to load it with apps you already own." -
When I was prompted there was an update on iTunes I did as usual and began installing the update. Something happened during that time and I got an error saying it didn't download correctly. Now when I go to open iTunes it gives me an error message and says I need to re-install the program. I'm not sure how to do that. I am also concerned that I will lose all of the things that I have backed up from my phones, purchases, apps, etc. Can anyone please give me some insight on what to do?
ThanksSee... Unable to install or open > http://support.apple.com/kb/TS5376
Also See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562
littlered1382 wrote:
I am also concerned that I will lose all of the things that I have backed up from my phones, purchases, apps, etc.
It has always been Prudent to Create and Maintain a Backup of anything you would not like to lose. -
Need to Re-install iTunes - here is how to do it
If you need to re-install the current version of iTunes here is a trouble free way of doing so... this may or may not take care of other problems as well, if so good luck... my only assumption here is you already have a good and problem free System... if in doubt ask 1st.
1st remove the receipts for iTunes so as a new copy can be reinstalled....
To do it yourself....
Go to the main System library and open the Receipts folder or Type 'Receipts' in Finder search box to find receipts folder....
drag to the trash... iTunes4.pkg and check to see if any other 'iTunes.pkg' files are there, if so, drag also to the trash but only the ones starting with 'iTunes' leave all others untouched and close the folder.
or have a GUI like Desinstaller do it for you..
Check that your HD is in order with 'Disk Utility' ...
Run repair HD from original CD or DVD install disk...
insert disk and re-start holding down the 'c' key until you see the spinning gear.
At installer level do not continue...
Use top left menu and go 'Disk Utility' (pre Tiger).... use 'Utilities' Menu for Tiger and go 'Disk Utility'
select your HD volume with Operating system on...
select 1st aid... select repair Hard Disk.
if errors are repaired run again until none are reported then verify your HD.
quit and return to the Finder Do not continue with the Installer...
Check the permissions are set correct on the Apple installed software...
Use 'Disk Utility' from Applications > Utilities > select HD... select 1st aid. repair permissions... if repairs are needed run again until none are repaired... do not worry about messages 'we are using special permissions etc... they are OK Quit when finished.
Click here to download iTunes 6.0.1 .... then install.
* if you have any combo system upgrades that need to be applied, now is the time to do it.... make iTunes the last thing to be installed.
Now do the HD repairs and permissions repairs again, as above, in the same order. Important
Your iTunes program should work OK now ... there are a few bits which are optional and I recommend as good things to do and that is, Check and set correct permissions on all your music files, replace the dock icon and convert the ID3 tags
Use BatChmod to set correct permissions on your home ~ Music folder
This compact GUI will perform the same tasks as a 'command line in Terminal '
drag the complete Music folder with libraries and iTunes Music folder inside to the BatChmod Icon and drop....
check path is correct.... tick if not already.... Owner=R W X, Group=R, Others=R,
for a 'Shared Folder' ... tick if not already.... Owner=R W -, Group=R W -, Others=R W -.
then tick 'Apply ownership and privileges' 'unlock'... click Apply... provide password... all done very quick...
Drag the iTunes Icon from the dock and replace it with a new copy from the Applications folder
Sometimes it also a good idea to convert ID3 tags...Start iTunes and select all songs in the library ... select from top menu 'Advanced' choose 'convert ID3 tags' .... ver. 2.3 works well with iTunes.
still having problems with iTunes run the latest 'combo' system upgrade... Mac OS X 'Combo' Update 10.4.3 for Tiger... Mac OS X Combo Update 10.3.9 for Panther... Click here for OS X 10.2.8 combo upgradeJaguarIf you need to re-install the current version of
iTunes here is a trouble free way of doing so... this
may or may not take care of other problems as well,
if so good luck... my only assumption here is you
already have a good and problem free System... if in
doubt ask 1st.
1st remove the receipts for iTunes so as a new copy
can be reinstalled....
To do it yourself....
Go to the main System library and
open the Receipts folder or Type 'Receipts' in Finder
search box to find receipts folder....
drag to the trash... iTunes4.pkg
and check to see if any other 'iTunes.pkg' files are there, if
so, drag also to the trash but only the ones starting
with 'iTunes' leave all
others untouched and close the folder.
or have a GUI like Desi
staller do it for you..
Check that your HD is in order
with 'Disk Utility' ...
Run repair HD from original CD or DVD install disk...
insert disk and re-start holding down the 'c' key
until you see the spinning gear.
At installer level do not continue...
Use top left menu and go 'Disk Utility' (pre
Tiger).... use 'Utilities' Menu for Tiger and go
'Disk Utility'
select your HD volume with Operating system on...
select 1st aid... select repair Hard Disk.
if errors are repaired run again until none are
reported then verify your HD.
quit and return to the Finder Do not continue with
the Installer...
Check the permissions are set
correct on the Apple installed software...
Use 'Disk Utility' from Applications > Utilities >
select HD... select 1st aid. repair permissions... if
repairs are needed run again until none are
repaired... do not worry about messages 'we are using
special permissions etc... they are OK Quit when
finished.
Click
here to download iTunes 6.0.1 .... then install.
* if you have any combo system upgrades that need to
be applied, now is the time to do it.... make iTunes
the last thing to be installed.
Now do the HD repairs and permissions repairs
again, as above, in the same order. Important
Your iTunes program should work OK now ... there are
a few bits which are optional and I recommend as good
things to do and that is, Check and set correct
permissions on all your music files, replace the
dock icon and convert the ID3 tags
Use
BatChmod to set correct permissions on your
home ~ Music folder
This compact GUI will perform the same tasks as a
'command line in Terminal '
drag the complete Music folder with libraries and
iTunes Music folder inside to the BatChmod Icon and
drop....
check path is correct.... tick if not already....
Owner=R W X, Group=R, Others=R,
for a 'Shared Folder' ... tick if not already....
Owner=R W -, Group=R W -, Others=R W -.
then tick 'Apply ownership and privileges'
'unlock'... click Apply... provide password... all
done very quick...
Drag the iTunes Icon from the dock and replace it
with a new copy from the Applications folder
Sometimes it also a good idea to convert ID3
tags...Start iTunes and select all songs in the
library ... select from top menu 'Advanced' choose
'convert ID3 tags' .... ver. 2.3 works well with
iTunes.
still having problems with iTunes run the latest
'combo' system upgrade... Mac OS X 'Combo' Update 10.4.3
for Tiger... Mac OS X Combo Update 10.3.9
for Panther... Click here for OS X 10.2.8 combo
upgradeJaguar
I tried all of those steps and it still doesn't work! Including downloading the combo. Any other tips? -
I need to re-install PS CS5.5
I was a beta tester. Adobe gave me a copy of CS 5.5 at the end of the Beta trials.
Now something is wrong inside PS Extended CS 5.5 that prevents it from successfully printing with a Samsung CLP-325W color laser printer.
So I think I need to re-install PS from the internet. (or other suggestions) This, under the assumption that something inside has gone bad.
Recent hardware installation: New graphics card. ATI 5770.
Other programs print fine from the same computer. Previous versions of PS print fine. Preview prints fine. Photoshop CS 5.5 starts the printer up, but the sequence doesn't execute entirely and a blank page comes out.
I've zapped the PRAM, repaired disk permissions, re-installed the printer drivers—nothing gets me back to where I was last week when all was printing fine.
So how do I keep all my Actions and internal settings intact while re-installing PS over the net?
MacPro. 8 cores. 6GB RAM.Download CS5.5 products
Mylenium -
I have Windows 7 and for some reason I cannot install Adobe Type Manager onto my Computer. I need ATM to install the DIN font but am having no luck what so ever. I can see the DIN font in my Dropbox but it is showing up like this:- ._DIN-bold, no file file extension. what am I doing wrong? is it Mac?
(1) Adobe Type Manager (ATM) is not compatible with any version of Windows beyond Windows XP (32-bit, only). Attempting to install ATM on any newer version of Windows may actually disable Window's capability of rendering Type 1 and OpenType CFF fonts, requiring a reinstallation of Windows.
(2) There is no need to use ATM to install any fonts under Windows.
(3) The file name ._DIN-bold is indicative of a MacOS font. These fonts cannot be installed on Windows systems.
- Dov -
I have Adobe Photoshop Elements 8 for Windows 7. I need to re-install it because my computer crashed. I saved the outer box, but I do not see a serial number and it is asking for it when I am trying to install the CD software. I went online, but the only serial number I see is when I registered the Photoshop Elements 2.0.
The serial number will be on the disc case, not the outer box. Find your serial number quickly
-
I accidently uninstalled Bonjour and need to re install it.
If I do what is suggested and uninstall i tunes and reinstall it, will I lose all my songs etc that I already have on i tunes?No. They will be right where you left them after re-installing iTunes.
Either way, you should be backing this content up anyways.
B-rock -
What needs to be installed on a client machine?
Downloads Documentation Discussion Forums Articles Sample Code Training RSS Resources For
Oracle Data Provider for .NET FAQ
About ODP.NET
I am familiar with SQL Server's .NET data provider, but am new to Oracle. Is it easy to learn to use ODP.NET? (Last Updated: 12/27/04)
What are the different ways Oracle integrates with Microsoft .NET? (7/22/05)
Where can I find ODP.NET help and sample code? (12/12/03)
I have ODP.NET installed, but I can't find the ODP.NET Dynamic Help. Where is it? (4/11/05)
What are the new features in this version of ODP.NET? (7/22/05)
How do I make a feature enhancement request for ODP.NET? (12/04/02)
What features will ODP.NET support in future releases? (12/04/02)
Configuration and Certification
Do I need to install ODP.NET on my Oracle database server? (7/22/05)
Can ODP.NET work with Oracle8, Oracle8i, Oracle9i, and Oracle10g database (DB) servers? Can these DB servers be on Linux or Unix? (7/22/05)
Can ODP.NET be used with an Oracle8, Oracle8i, or Oracle9i Release 1 client? (11/02/04)
What do I need to have installed on my client machine to have ODP.NET work? (11/02/04)
Does ODP.NET support Windows Server 2003, .NET Framework 1.1, and Visual Studio .NET 2003? (11/02/04)
Common Runtime Issues
How do I use distributed transactions with ODP.NET? (3/20/03)
What if I have some applications that require an earlier Oracle client (e.g. using the Microsoft OLE DB Provider for Oracle with Server Explorer)? I want to be able to run both ODP.NET and these other applications from the same machine. (12/12/03)
I get an error: "Unable to load DLL (OraOps.dll)". How do I fix this? (4/23/04)
I want to use the Oracle9i Release 2 version of OraMTS with an Oracle8i database. I get a "No error information available: XACT_E_NOENLIST(0x8004D00A)" error when running an application using OraMTS. (12/04/02)
ODP.NET and Other Oracle Providers for .NET
Are ODP.NET and Microsoft .NET Framework Data Provider for Oracle the same product? (12/12/03)
Which .NET data access driver should I use among ODP.NET, Microsoft .NET Framework Data Provider for Oracle, OLE DB .NET, and ODBC .NET? (12/04/02)
I bundle ODP.NET with an application I've built, which I want to distribute or sell. Does Oracle charge licensing fees for this? (7/16/03)
Q: I am familiar with SQL Server's .NET data provider, but am new to Oracle. Is it easy to learn to use ODP.NET?
A: Yes. ODP.NET inherits from all the ADO.NET base classes, which is what SQL Server's .NET data provider, SqlClient, is based upon. The ADO.NET constructors, methods, and properties that you use with SQL Server will be the same with Oracle. For many applications, the only notable differences will be having all objects that were preceded with "Sql", such as SqlConnection, be preceded by "Oracle", such as OracleConnection, and accounting for differences between Oracle and SQL Server database data types, SQL, and stored procedure calls.
Q: What are the different ways Oracle integrates with Microsoft .NET?
A: Oracle integrates with .NET in a number of ways. For optimized .NET data access, ODP.NET enables access to all of the Oracle database's advanced features, such as RAC and XML DB, while ensuring the fastest performance from the .NET Framework.
For .NET development tools that make Oracle easier to use, the Oracle Developer Tools for Visual Studio .NET provide wizards and designers that auto-generate ODP.NET code and can browse and edit schemas and stored procedures. Additionally, it includes a Data Window to modify and view data and context-sensitive help.
Beginning with Oracle Database 10g Release 2, developers can build and deploy .NET stored procedures for their Oracle database.
For application integration, web services can facilitate integration between your existing Oracle and .NET applications.
Q: Where can I find ODP.NET help and sample code?
A: ODP.NET documentation is available from within Visual Studio .NET using Dynamic Help. Just hit the F1 key when your cursor is on an ODP.NET API and a help page for that API will appear right within Visual Studio .NET.
Additional ODP.NET documentation is available both locally installed and from the ODP.NET documentation page.
Sample code can be found both locally as part of the ODP.NET installation (e.g. c:\oracle\<Oracle Home Name>\ODP.NET\samples) and on ODP.NET samples page.
ODP.NET users can ask questions on the ODP.NET discussion forum.
Q: I have ODP.NET installed, but I can't find the ODP.NET Dynamic Help. Where is it?
A: This behavior sometimes occurs when installing new Visual Studio .NET versions over an ODP.NET installation. To enable ODP.NET Dynamic Help, go to Visual Studio .NET Combined Help Collection Manager located in Visual Studio .NET 2002 or Visual Studio .NET 2003. Make sure the box next to the Oracle Data Provider for .NET Help is checked and click on the Update VSCC button. Close Visual Studio .NET and re-open it to enable ODP.NET Dynamic Help.
Note: Because of security restrictions, you may need to copy and paste the links above to a browser, rather than clicking on them. Once copied to a local browser, if you have a Windows service pack that prevents active content (e.g. Windows XP service pack 2), you will need to allow active content to view the complete page. To do this, click on the yellow bar at the top of the Visual Studio .NET Combined Help Collection Manager page, which indicates active content has been blocked. Select "Allow Blocked Content". A security warning will show up. Click "Yes" and you will be able to view the page in its entirety, including having the option to incorporate the Oracle Data Provider for .NET Help into Visual Studio .NET.
Q: What are the new features in this version of ODP.NET?
A:
ODP.NET 10.2.0.1.0
Server-side ODP.NET for .NET stored procedures
RAC client-side connection load balancing and automatic connection cleanup
Database Change Notification
LOB and LONG retrieval - faster data retrieval, InitialLOBFetchSize can be up to 2GB, and full LOB functionality when InitialLOBFetchSize > 0 (i.e. GetOracleClob and GetOracleBlob methods are enabled). These same features are now enabled with LONGs with its respective APIs.
Connection Pool Management - explicitly clear connection pool(s)
Client Identifier property for supporting application context security, such as with VPD
Input REF Cursor parameters
ODP.NET 10.1.0.3.0
Statement caching
DeriveParameters - automatic population of stored procedure parameters
Cancel long running queries
ADO.Net 1.1 interfaces - HasRows and EnlistDistributedTransaction properties
LOB and LONG retrieval - Entire LOB and LONG column data can be retrieved even if the select list does not contain a primary key, ROWID, or unique key.
ODP.NET 10.1.0.2.0
Grid support
Schema-based XMLType
BINARY_FLOAT and BINARY_DOUBLE datatypes
Multiple Oracle Homes
ODP.NET 9.2.0.4.01
Improved XML DB and XMLType support
PL/SQL associative arrays
connection pool validation
InitialLOBFetchSize property to improve LOB retrieval performance
Q: How do I make a feature enhancement request for ODP.NET?
A: You can contact Oracle Support or use the ODP.NET discussion forum to make an enhancement request.
Q: What features will ODP.NET support in future releases?
A: In general, Oracle does not discuss features in future product releases until the release date nears. We are well aware of enhancement requests made through the ODP.NET discussion forum and Oracle support. We encourage Oracle users to continue to make their requests known. Oracle will do its best to fulfill these requests in future releases.
Q: Do I need to install ODP.NET on my Oracle database server?
A: No. You only need to install ODP.NET for running client or middle-tier .NET applications. The exception is if you are using .NET stored procedures in the database server. The server-side ODP.NET provider will automatically be installed with the Oracle Database Extensions for .NET.
Q: Can ODP.NET work with Oracle8, Oracle8i, Oracle9i, and Oracle10g database (DB) servers? Can these DB servers be on Linux or Unix?
A: Yes and yes. Oracle clients can support older and newer versions of the Oracle database. Consult the Oracle on Windows FAQ for more information.
Oracle clients on Windows can work with Oracle database servers on any platform.
Q: Can ODP.NET be used with an Oracle8, Oracle8i, or Oracle9i Release 1 client?
A: No. You need to use the Oracle9i Release 2 or higher client.
Q: What do I need to have installed on my client machine to have ODP.NET work?
What needs to be on a client machine when running an application compiled with the 10g ODP.NET?
The FAQ states the following :-
A: You will require the following:
Windows 2000, Windows XP Professional, or Windows Server 2003
Microsoft .NET Framework 1.0 or higher
Oracle9i Client Release 2 (9.2) or higher
Oracle Net Services (included with the client)
Oracle Services for Microsoft Transaction Server, Release 2 (9.2) or higher. This is required for applications using distributed transacations.
This implies that ODP.NET does NOT need to be installed on a client. However, I cannot find OraOPs9.dll on a machine with Client Release 9.2 installed. Should OraOps?.dll automatically come with a Client installation of 9.2 or higher?
Also, if an application is built with the 10g ODP.NET, can it be run from a machine with OraOps9.dll?
I'd be very grateful for anyone who can clear up my confusion.
MickThis implies that ODP.NET does NOT need to be installed on a client. However, I cannot find OraOPs9.dll on a machine with Client Release 9.2 installed. Should OraOps?.dll automatically come with a Client installation of 9.2 or higher?
ODP.NET needs to be installed on the client. OraOps9.dll is part of ODP.NET, not the Oracle Client.
Also, if an application is built with the 10g ODP.NET, can it be run from a machine with OraOps9.dll?
If an application is built with 10g ODP.NET, it can be run with 9.2 ODP.NET as long as you do not use any 10g APIs. The new features in 10g ODP.NET are included in the doc and the ODP.NET FAQ for your reference.
Maybe you are looking for
-
Regarding sd module modification in va01/va02/va03
as per we can configure the screen of <u><b>mm01,mm02,mm03</b></u> in spro by modifying the datascreen and assining the data screen to <b><u>mm01/mm02/mm03</u></b>.teis requirement i executed. but now i need to modify th screen of <u><b>va01/va02/va0
-
I am just wondering, if there is an adobe staffer out there, if unique form responses or at the very least unqiue email notifications (just numbered emails when forms are filled out) is in the nearby horizon? I love forms central but any other major
-
Hi Friends, I want to display page no's at the end of every pages in the sapscript form. And the page no's should displayed as Page 1-5, Page 2-5,,,,,.So plz tell me hw to do it. Regards, Ranjith
-
Hi, I found a glitch in Snow Leopard when I renaming files. The text area where to type the new name is not placed in the right position. This error happens in a folder, but if I open other folders it doesn't come out.
-
64 bits OS compatibility ?
Hi, I´m running Photoshop CS3 Extended on a Quadcore with 4 giga of Ram. Windows XP is 64 (I think it´s a problem). I´m having a problem... Photoshop is very slow... very very slow when comparated to my old pc that was a XP 32 bits and 2 giga of ram.