Do I need to rebuild my menu?

I'm using photoshop to make my menu splash screens. I've successfully built my .psd file with all the buttons and highlights then imported it as a menu into Encore where all the links show properly but after building a DVD and watching it on a monitor I've made a few changes to the .psd file but they don't show up right away in Encore.
Do I need to delete the menu from the project panel of Encore, import it again and rebuild my project or is there a way to refresh or re-import without having to rebuild the entire project by hand?
Thanks in advance,

Tayedrummer,
Following Stanley's steps, I'd like to add one more thing. Sometimes, the Save (Ctrl-s) in Photoshop does not update the Menu back in Encore. This happens sometimes, but every now and then there is a glitch. Through testing, when this glitch occurs, I'vd found that doing 3 Ctrl-s Save's forces Encore to update. Now, I've developed a workflow habit of doing the first Ctrl-s, when I am done, and my Button Layer Sets are still open in the Layers Palette. I close each Button Layer Set (little ▼ in the circle left-hand side of the Layer Set's name) and hit Ctrl-s after each one. Finally, when all Button Layer Sets are closed, I hit Ctrl-s one more time.
Do not know why < 3 doesn't do the trick, but 3+ has always worked for me. Now, I do it out of habit for all PS edited Menus. For me, it does not seem to matter if the PSD is still Open in PS, or has been closed.
Caveat: since you are really working with a linked proxey of the .PSD in PS, do not do Save_As, or Save_As_a_Copy, unless you want to unlink the .PSD from Encore and actually Save it elsewhere. That link is very important. If you break it, you WILL need to Import your newly Save_As .PSD into Encore to use it. When I'm using Menus as stills in Motion, say for a Play First transition AV to the real Menu, I'll do all the Ctrl-s Saves, first, and then do a Save_As (with Sub-picture Highlights as I need them) and then Import that new still into PrPro to create my AV. I do the same for creating Button Transitions (AV files).
More than you asked for, but I thought you might benefit from a few more tips on editing a Menu in PS from Encore. Very powerful tool.
Hunt

Similar Messages

  • 9.0.5.2 IDE: please give me back the "rebuild" context menu

    Hi, in several cases the "make" on a package or file does not compile my contained sources after removing the previous compiled .class files from the classes directory.
    A workaround seems to be deleting the *.cdi file.
    But anyhow, could you please readd the rebuild file / package to the editor and navigator node context menu?
    Thanks, Markus

    Yes, you have found the right workaround, that whenever you delete one or more .class(es) from the output directory, you must remove the .cdi file at the root of the output directory.
    We are working to improve this in the current version in development, you shouldn't really need the rebuild of a package, make should always do the right thing. But when you go out and delete manually some .class(es), it won't do the right thing.

  • NEED more than 15 menu item in Context Menu ????

    Hi,
    I really need to have more than 15 menu item displayed on Context Menu. I desperately need some workaround or ideas to achieve this
    My client has invested thousands of dollar in Flex Project, he definitely need more than 15 menu item.If this project failed , client will NEVER think to invest in flex.
    Had I been  aware of this limitation before I would have thought some solution by now.This comes as a surprise to me at the last moment ,just fews days before Prod Date.
    I cant also user java Scrip heck  as my Flex application is running inside Dot net Container , I do not access to the luxury of java script
    Pls gents help me get rid of this ...PLEASE provide some ideas.
    Thanks in advance.
    Thanks,
    Dharmendra

    Thanks Natasha,
    I got your point  but as for as I  know grouping like Quality is not possibel in Flax Context menu. I also cant go for window style menu(file,edit) because I need them to be displyed on DataGrid right clk . I am designing a trade datagrid where in trader can see all trades and he can approve/reject etc by just right clk and  selcting proper menu item form Context Menu.
    In case of window style (acrobat.com) menu trader will have to reach to  menu instead of  getting all options on mouse right clk
    I will have to think other alternative wich provides same ease as cotext menu.(God knows what is that )
    Once again thanks for suggestion.
    Regards,
    Dharmendra

  • Do I need to rebuild my podcast?

    Hi, I am trying to post some weekly talks through a podcast using Blogger. I have been doing this for a little over a year now, and it has been working beautifully...up until a few weeks ago. Whether or not this has anything to do with transferring the feed to Google, I am not sure... I deleted a couple of the most recent episodes, thinking that would help, but it didn't.
    Here are the basics for what you need to know:
    a) The URL of the blog is http://www.umdnewman.blogspot.com
    b) There are two URLs of that site's feed: http://www.umdnewman.blogspot.com/feeds/posts/default
    and http://www.umdnewman.blogspot.com/feeds/posts/default?alt=rss
    c) The URL of the FeedBurner feed is http://feeds2.feedburner.com/homilies3
    d) I am using Blogger as my publishing software.
    For whatever reason, if I try to subscribe to my podcast through
    iTunes, it will let me subscribe, but my episodes will not come up. The new episodes appear and I can download the podcast episodes individually through the iTunes store, but if I try to refresh the podcast in the podcast library, it won't work. The little orange circle with two arrows appears next to the title of the podcast appears, but the arrows inside of it are not working, which tells me something isn't getting through. Eventually a little gray exclamation point shows up, and if I double click on it, it says "the network connection timed out."
    In Feedburner, I click on the "Homilies" feed, and I click on the "Troubleshootize" tab. I click on the FeedMedic, and it gives me a list of the errors that have occurred in the past few weeks. Right now it says everything
    is "ALL CLEAR", and yet I still can't get iTunes to work with it. Under "Actions you can take" it says to check the validity of the feed. I click on "Tips and Tools." If I click on the link for Originial Feed Validity, it says it's a valid Atom 1.0 feed, and then it says, "This feed is valid, but interoperability with the widest range of feed readers could be improved by implementing the following
    recommendations." It lists off 5 different things that look like theymight need fixing, but I really don't want to touch the XML, and even if I could touch it I don't know how to, as I really don't want to screw things up entirely and make a mistake that cannot be reversed.
    So in that link it tells me the feed is valid, but if I click on
    FeedBurner Feed Validity, it tells me that:
    This feed does not validate. line 2, column 3169: Undefined item
    element: app:edited (65 occurrences) [help]
    .. spot.com'/></description><app:edited
    xmlns:app="http://ww ...
    ^
    And then it gives me three other things that could improve
    interoperability. Am I just supposed to go through and delete all of
    the times it says "app:edited"? If so, how do I do this?
    Or do I just need to rebuild the podcast altogether? I have looked through some of the posts and I have seen mentionings of "Podcast Maker". Is this something I should switch to?
    If someone could please assist me with this problem soon, I would
    really appreciate it! Thanks!
    Sincerely, Mary Hazuka

    A podcast feed is a plain text file containing various tags: you can see an example on my page at
    http://www.wilmut.org.uk/pc
    You will notice that each tag begins a new line. Your feed does not have any line returns between the tags. This doesn't matter to iTunes or other feed readers, but if you put the URL into FireFox and choose View>Page Source you get a single very long line, which you have to scroll through: it makes it almost impossible to read. Other readers may wrap the feed to the page, but it's still difficult to find anything. However if you are using Blogger to make your feed you probably don't have any method of controlling this.
    As to iTunes, I can't suggest anything. except that a reinstall won't affect your music library, which is stored separately from the application. You could try in the iTunes Forum.

  • I am using your software: CS^ InDesign Suite on a PC using a Windows 7 operating system.     Due to eyesight issues, I need to have the menu bars of programs in easy-to-read font and picture size.  Specifically, the menu bar

    Hi,
    I am using your software: CS6 InDesign Suiteon a PC using a Windows 7 operating system.
    Due to eyesight issues, I need to have the menu bars of programs in easy-to-read font and picture size.  Specifically, the menu bar across the top (File, Edit, View, etc.), and the menu bar on the left side with the graphic depiction of options.
    In earlier versions of Windows (e.g. XP), whenever I changed the screen resolution on my computer to a lesser resolution in order to show the link icons on my desktop in a larger, more readable size, all the software programs, including yours, appeared on my screen with the menu bars in the larger font size that I needed.
    However, in Windows 7, this is not the case.  Even though I have selected the lowest resolution, making the icons on my desktop extremely large, I cannot read the options across the top menu bar of your program, nor the pull-down menu items that they contain.  I cannot see the graphic depictions of options on the left side of the screen. They are all too small.  How can I make your program increase the size?

    CS6 is not high-DPI compatible/ enabled and that can't be changed. If you cannot6 make it work with your operating system means, then short of joining Creative Cloud and using newer versions there is nothing you can do.
    Mylenium

  • I am using CS6 InDesign suite on a PC using a Windows 7 operating system.     Due to eyesight issues, I need to have the menu bars of programs in easy-to-read font and picture size.  Specifically, the menu bar across the top (File, Edit, View, etc.), and

    I am using CS6 InDesign on a PC using a Windows 7 operating system.
    Due to eyesight issues, I need to have the menu bars of programs in easy-to-read font and picture size.  Specifically, the menu bar across the top (File, Edit, View, etc.), and the menu bar on the left side with the graphic depiction of options.
    In earlier versions of Windows (e.g. XP), whenever I changed the screen resolution on my computer to a lesser resolution in order to show the link icons on my desktop in a larger, more readable size, all the software programs, including yours, appeared on my screen with the menu bars in the larger font size that I needed.
    However, in Windows 7, this is not the case.  Even though I have selected the lowest resolution, making the icons on my desktop extremely large, I cannot read the options across the top menu bar of your program, nor the pull-down menu items that they contain.  I cannot see the graphic depictions of options on the left side of the screen. They are all too small.  How can I make your program increase the size?

    NO way.
    Mylenium

  • Need to rebuild Outlook 2011 for mac identity for exporting data file.

    I was exporting outlook for mac data file (to import it into apple mail), and suddenly Outlook email client crashed and when I tried again it said that I need to rebuild the Outlook for mac database using rebuild utility. I took help from some professional technicians but it was a dead end. They said that my outlook for mac database was corrupt and they could not help me any further. I had years of emails in outlook for mac that I needed to move to apple mail as I was fed up of these frequently occuring outlook 2011 errors. Please if anyone could help me in this case then it will be very helpful.
    Thanks

    Outlook for mac stores archives its data in .olm format and it originally stores its mails in .OLK format. If everything has failed then you can seek help of a tool that can recover these .olk14 messages. One tool I know that is capable of doing so is http://www.outlookmacdatabaserecovery.com/.
    Look for the trial version first and see of it works and recovers you emails.

  • My computer crashed and I need to rebuild my site on a different computer

    My computer crashed and I need to rebuild my iweb site on another computer. What do I need to do?

    I take it that you didn't backup your domain.sites file?  If not, then on the Mac that you are re-building your site on, just open iWeb and start re-building.
    If you did, then attach the hard drive that you want to restore from to the Mac that you are using and restore the relevant domain.sites file to that computer and then double click it to open it and iWeb should open it.

  • Keep getting error message that iphoto has detected inconsistencies and needs to rebuild

    while adding photos to library keep getting error message that iphoto has detected inconsistencies and needs to rebuild the library..how do I fix?

    By rebuilding your library.
    Back up your iPhoto library before you do that.
    If iPhoto is open, quit it.
    Hold down the Option and Command keys while you open iPhoto (click the iPhoto icon in the Dock).
    The Photo Library First Aid window opens.
    Click "Rebuild database" and click the "rebuild" button.
    If this does not solve the problem, see "option 2" in Terence Devlin's post here:
    Re: i keep getting the message iPhoto has detected inconsistencies in your library but after repairing it it just quits
    Regards
    Léonie

  • Do I need to rebuild the operating concern once again.

    Hi,
    I have added extra field to the COPA data soruce (1_CO_PA_XXX) and written CMOD code to populate the data. But I am not able to see the newly added field while trying to fill the data through RSA3.
    1. Why am I not able to see the newly added field.
    2. Do i need to rebuild the operating concern once again? If yes, Do i need to resbuilt in every system or can it be transported?
    3. I am also seeing another data source (1_co_pa_xxx_oc). What's the difference between data sources 1_CO_PA_XXX and 1_co_pa_xxx_oc?

    When you're doing a test extraction in RSA3, is the column there but with no data or is the column not even showing up (you may have to right-click on the columns and click on Show... to get the new column to show in RSA3)? Try deugging the 1_CO_PA_XXX DataSource in RSA3 on your R3/ECC source system to determine why the code in CMOD isn't being invoked, or not providing the data. We have been able to modify our 1_CO_PAXXX DataSource by enhancing the extraction structure with an append and then creating code in CMOD, so you shouldn't have to recreate it.
    As for the 1_CO_PA_XXX_CO DataSource, it appears that someone has created a second COPA DataSource. It could be that one was created opposite of the 1_CO_PA_XXX DataSource in that it's account-based v. cost-based or it could be the same basis with different fields.

  • Do I need to rebuild ?

    My application is already build, tested and validated. I want to upgrade my ni-switch and ni-dmm drivers from version 1.5 to version 1.6.
    Do I need to rebuild my application or it will use the new drivers without the need to rebuild ?

    The new versions for NI-Switch and NI-DMM were minor fixes and not major revisions of the 1.5 driver. Therefore you should have no problem upgrading to the new 1.6 version and using your previously built application. If you run into any snags, please consult our Technical Support at our web site.

  • I have partitioned my tables, do I need to rebuild the indexes of the table

    Hello,
    I have partition very huge tables, by using rage partition method. After that few queries taking more time than before. Does the old indexes needs to rebuild?
    Thanks

    929941 wrote:
    Hello,
    I have partition very huge tables, by using rage partition method. After that few queries taking more time than before. Does the old indexes needs to rebuild?
    ThanksWhat do you think?
    By the way, how did you partition existing tables? Did you use dbms_redefinition, or did you use CTAS, or some other method?
    I love RAGE partitions. You should always always partition your rage.

  • Need to rebuild string programmatically having '&' in it.

    Gurus,
    I need to rebuild a string value programmatically which has '&' and insert the same into another table.
    this info is being passed to one procedure which will insert the reqd details into one table.
    Hence,procedure abc (p_input_id number,p_input_string varchar2) will be 2 input parameters.
    The only point where i'm getting stuck is the way to handle multiple '&' in a particular string.
    Now the string may contain n no of '&' occurrances.
    Hence,can you suggest/modify the existing code so that it can be used in a general way.
    Assume creating arrays permission is not granted to the schema.
    Logic that i've used is :Find the sub-strings coming in between '&' and concat them with chr(38) which will give a '&'.
    My Code :
    SQL> declare
    2 lv_count number;
    3 i number:=1;
    4 lv_len_str number;
    5 lv_great number:=0;
    6 lv_set_first varchar(1000):=null;
    7 lv_set_curr varchar2(1000):=null;
    8 lv_prev varchar2(1000):=null;
    9 lv_set varchar2(1000):=null;
    10 begin
    11 select length(col2) into lv_len_str from abc where col1=5;
    12 for a in 1..lv_len_str
    13 loop
    14 select instr(col2,'&',1,i) into lv_count from abc where col1=5;
    15 exit when nvl(lv_count,0)=0;
    16 i:=i+1;
    17 end loop;
    18 lv_great:=(i-1);
    19 --dbms_output.put_line ('Highest occurrance : '||lv_great);
    20 i:=1;
    21 select substr(col2,1,instr(col2,'&',1,1)-1) into lv_set from abc where col1=5;
    22 dbms_output.put_line ('First Set : '||lv_set);
    23 lv_set_first:=lv_set||chr(38);
    24 i:=1;
    25 for a in 1..lv_great
    26 loop
    27 dbms_output.put_line ('Value of i here : '||i);
    28 select substr(col2,instr(col2,'&',1,i)+1,(instr(col2,'&',1,i+1)-instr(col2,'&',1,i)-1)) into lv_set_curr from abc where col1=5;
    29 -- dbms_output.put_line (lv_set);
    30 i:=i+1;
    31 lv_prev:=lv_set_first;
    32 lv_set:=lv_prev||chr(38)||lv_set_curr;
    33 dbms_output.put_line (lv_set);
    34 exit when i>lv_great;
    35 end loop;
    36 --dbms_output.put_line ('Overall set : '||lv_set);
    37 end;
    38 /
    First Set : filename=oracle.exe
    Value of i here : 1
    filename=oracle.exe&&filename2=123455
    Value of i here : 2
    filename=oracle.exe&&filename3=23456
    Value of i here : 3
    filename=oracle.exe&&
    PL/SQL procedure successfully completed.
    Desired Output :
    filename=oracle.exe&filename2=123455&filename3=23456&filename4=test which is not happening.

    Procedure abc (p_input_id number,p_input_string varchar2) will be 2 input parameters.
    Input_id will be 1,2,3,4,etc
    Input_string will be in the format abc#bcd#cde#def..so on ('#' is parser.. sort of delimiter)
    Here 'abc' correspond to 'filename=oracle.exe&filename2=123455&filename3=23456&filename4=test'
    'bcd' correspond to 'filename=oracle10g.exe&filename2=12345&filename3=23456'
    'cde' correspond to 'filename=Java.zip&filename2=280648119&filename3=null'
    'def' correspond to 'filename=c12kprp-boot-mz.120-33.S1.bin&filename2=278725201&filename3=null'
    so on and so forth ...
    Here is a table abc (col1 number,col2 varchar2(100)) which will store the values.
    Now i want the result of procedure to store values find values between '#' and insert them with value of input_id
    input_id : 1
    input_string : filename=oracle.exe&filename2=123455&filename3=23456&filename4=test#filename=oracle10g.exe&filename2=12345&filename3=23456#filename=c12kprp-boot-mz.120-33.S1.bin&filename2=278725201&filename3=null
    So the table abc would contain values filename=oracle.exe&filename2=123455&filename3=23456&filename4=test,
    filename=oracle10g.exe&filename2=12345&filename3=23456,filename=c12kprp-boot-mz.120-33.S1.bin&filename2=278725201&filename3=null
    against value of 1 in the table.
    Now,if suppose, user happens to pass 4 strings for input_id which is 2,which can be
    filename=c12kprp-boot-mz.120-33.S1.bin&filename2=278725201&filename3=null#filename=Java.zip&filename2=280648119&filename3=null#filename=oracle10g.exe&filename2=12345&filename3=23456#filename=oracle.exe&filename2=123455&filename3=23456&filename4=test, so all these strings separeted by # would be stored against value of 2 in table abc.
    Let me know if you need any thing.

  • Library needs daily rebuilding?

    My Library started acting funny a few weeks ago, and rebuilding and trashing the preferences seemed to fix the weirdness.
    Now, adding images to projects, making smart albums and changing ratings (pretty much all I use Aperture for) doesn't work consistently. Quitting or Force Quitting will bring the particular image or album back, but eventually I need to rebuild the library to make Aperture work properly.
    If I use Aperture more than a few hours, I need to rebuild. Other Apple programs run fine (Mail, iTunes, Safari) and I've no problem with the other applications I use (PS and Illustrator CS3.)
    Any thoughts?
    55,000 images, 25 GB Library size, 10.4.11, Aperture 2.1, 16 GB RAM, Mac Pro 2.66, Library is kept on a 6TB external RAID.

    One more thing to add - I ran the "Consistency Check" on the library a few weeks ago too. It seemed to crash Aperture the first few times I tried it; I would Force Quit after a couple of hours. I wasn't sure, so I let it run over the weekend, from Friday night to Monday morning, and it never made any progress.

  • Need to rebuild my new HD from old HD with my iTunes

    I need to rebuild my newly installed iTunes, on my new HD, with the data, music, iPhone history, iPhone apps, on my old iTunes which is now on an external HD that might fail soon.  I have tried moving folders from the old iTunes to the new one but I have not achieved a complete rebuild.  Where are all the files stored for a complete rebuild.

    http://support.apple.com/kb/ht1751

Maybe you are looking for