Do I need to refresh Info Providers when I chg the Mast Data attri to Nav

Hai Gurus,
   Can any tell me, When I change an attribute of master data, material to a navigation. Do I need to refresh data to info provider, cube?. If this cube is part of the multi provider. In What sequence I need to make the changes?. I assume.
1. change to the master data.
2. then assign the dimention to it at the multiprovider level.
3. then Identity in the multiprovider.
4. available in the query
It is okay? Please confirm.
Thanks, Vijay.

Is not necesary to refresh infoprovider.
1.- Change attribute in master data from only attribute to navigational.
2.- Set navigational attribute as navigational in all infoproviders in the multiprovider.
3.- Set navigational attribute as navigational in multiproviders

Similar Messages

  • DIM IDu0092s are polluted only when we load the Master data and SIDu0092s

    DIM ID’s are polluted only when we load the Master data and SID’s are polluted only when load the retraction data. System automatically performs the reconciliation of DIM and SID’s  when we delete the transaction and master data.
    a.     True
    b.     False

    Hi,
    You can use the mapping section of the transformation file for this purpose. It should be something like:
    *COL(5) + *Str(_) + *COL(1)
    I am considering that the 5th column of your file is the property. The 1st column is the ID.
    Please take a look at the below link for more information:
    http://help.sap.com/saphelp_bpc75_nw/helpdata/en/5d/9a3fba600e4de29e2d165644d67bd1/content.htm
    Hope this helps.

  • SID is not generated when i load the master data

    hi
    We got the error "No Sid found "000631330" of characteristic 0COSTELMNT when transaction data is loaded.
    We have loaded the value "000631330" for characteristic 0COSTELMNT  and reloaded from the PSA . still we r getting the error  No Sid found "000631330" of characteristic 0COSTELMNT
    Thanks much in advance
    Raj

    Hi.....
    First check whether that value exist in the Master data table.........to do this Go to RSA1 >> search the infoobject >> Go to the Master data / text tab..............here check the P table...........to check it double click on the table..........there check if that value exist...........and also check the version..........whether it is in M version or A version..............If it is in M version.............then activate the Master data..........because SID gets generated during the activation of the Master data..................
    To activate the Master data.................use the program : RSDDS_AGGREGATES_MAINTAIN...........
    Then repeat the load.........
    If the value does'nt exist in the table...............then first check the IP.............if the setting is only PSA..........then first update the request in the target...........if the setting is OK..............
    Then go to the source system...............check in RSA3...........give the datasource here.........and check whether the value exist in the source system or not.................if not then check the R/3 tables.......that whether the value exist in the table or not..............if the value exist in the table............then check how data is getting populated in the Extract structure..........
    Hope this helps.........
    Regards,
    Debjani.......

  • When I open iPhoto 9.2.1 it says that my library needs to be upgraded but when I upgrade the library I am trying to open (33 GB worth of pictures from 2006) the new application says it cannot read the files and how to find them on the system to reimport?!

    When I open iPhoto 9.2.1 it says that my library needs to be upgraded but when I upgrade the library I am trying to open (33 GB worth of pictures from 2006) the new application says it cannot read the files and how to find them on the system to reimport?! and then I'd like to erase the original files since the space requirement is huge!!!! Why is upgrading software iPhoto such a pain. I've gotta get a presentation done and all I get for my money is roadblock!!!

    hello, it sounds like the library is damaged.
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. 

  • HT201413 Was following prompts to update my ipod to iOS6 and itunes says the ipod needs to be restored, but when I follow the prompts to restore it says it can't find the ipod? Any ideas?

    Was following prompts to update my ipod to iOS6 and itunes says the ipod needs to be restored, but when I follow the prompts to restore it says it can't find the ipod? Any ideas?

    Did you try removing and reinstalling all the Apple software using:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

  • PC went south. Geeks brought it back. PS elements and premier 11 can't start. Error msg sez configuration incorrect needs to be reinstalled. When I load the disk I get a blank screen. Try to uninstall and can't find apps i control panel. How can I get the

    PC went south. Geeks brought it back. PS elements and premier 11 can't start. Error msg sez configuration incorrect needs to be reinstalled. When I load the disk I get a blank screen. Try to uninstall and can't find apps i control panel. How can I get the apps back?

    adobeamatuer
    Thanks for the reply.
    Although the security of Windows XP SP3 32 bit is compromised by Microsoft no longer supporting XP, if Windows XP was restored as claimed, you should still be able to install/uninstall Premiere Elements versions of it that you did before the Microsoft support removal.
    I think a revisit to the Geeks would be in order. It may be that they could not restore Windows XP because of the Microsoft non support. I would take along the Premiere Elements installation disks so that you do not leave there without actually seeing Premiere Elements (or a non Adobe program) running on your restored Windows XP. What was the other software that you tried to use that did not work?
    Please update us on your progress when you get a chance.
    Best wishes
    Thanks.
    ATR
    Add On...spelling correct 12 03 2014.

  • Hello,I have done this successful in the past but on my IPad it shows I have 4 apps that need to be updated so when I hit the update tab all I get is a white screen. When I hit the purchase or other tabs it opens up. What could be the problem?

    ****,I have done this successful in the past but on my IPad it shows I have 4 apps that need to be updated so when I hit the update tab all I get is a white screen. When I hit the purchase or other tabs it opens up. What could be the problem?

    There have been numerous reports on the forum today regarding this issue. It seems to be an issue at Apple, but no information has been posted on the status site.
    http://www.apple.com/support/systemstatus/

  • I need to change my Cursor when I rollover the Image, Any feature is there in Muse...?

    I need to change my Cursor when I rollover the Image, Any feature is there in Muse, I searched it, But no use, Is there's any plugin is there to do...?

    Click here and request assistance.
    (89404)

  • GETWA_NOT_ASSIGNED short dump when load business partner master data

    Hi
    I've this error GETWA_NOT_ASSIGNED short dump when load business partner master data, it's running in BI 7.0 with support package 12.
    The error is because the field symbol is that pointed to the line of an internal table that was deleted.
    I think that it's an incompatibility between subroutine and unicode.
    Do you have idea about correct this error?
    Regards
    Jose.

    Hi Ravi
    Yes, it's a dump
    It's when running a process chain to load Business partner master data
    The error say:
    -.You address a field symbol that pointed to the line of an internal table that was deleted.
    -.You address a field symbol that was previously reset using UNASSIGN or that pointed to a local field that no longer exist.
    -. You address a global function interface, although the respective function module is not active - that is, is not in the list of active calls. the list of active calls can be taken from this short dump.
    I think that it's for the unicode corversion because I've the last support package 12 installed and the rest of the process chain are running perfect.
    My hotmail mail is [email protected] if you need the screen shot.
    Regards and thanks a lot
    Jose

  • When we get the actual data in BPC for planning, is the data consolidated

    I had a question regarding Planning. When we get the actual data in BPC for planning, is the data consolidated? Do we need to run the consolidation business rules( IC Booking, Matching, IC Eliminations) on the data before we can use it for planning? Per my understanding we have to run Currency Conversion on this...correct?
    Also, where do I get my actual data from? Does ECC/ Source system have data from all entities( CHQ, Region and Countries)?
    Please help!
    Thanks in advance

    Hi Kimi,
    In a hierarchical structure, the data is always loaded in to the base level, and the data is automatically rolled up to its parents.
    The currency conversion will also take place at the base level, and as mentioned earlier, the converted data will also be rolled up as per the hierarchy.
    The heading of this thread says planning. So, ideally, there wont be any legal (or statutory) consolidation. You might use the US elimination however, for eliminating the intercompany transactions, if any.
    The planning can be done as zero based (wherein the user has to enter the planned data manually from scratch) or non-zero based (wherein the planned data of previous year is copied and the user can change the data as required).
    The flow of events cannot be suggested by us. It has to be discussed with the business to understand how do they do the planning.
    Hope this helps.

  • Error when loading the master data

    Hi all,
    Can anybody help me out. I am loading the master data from DB Connect source. When i am trying to load it it is giving the runtime error PERFORM_CONFLICT_TAB_TYPE. Can anybody tell me what could be the problem & necessery steps to take.
    Thanks in advance.
    Regards,
    Shaik.

    Hi,
    Please go through the following threads:
    PERFORM_CONFLICT_TAB_TYPE  shortdump during data loading into ODS
    Perform_conflict_tab_type error
    PERFORM_CONFLICT_TAB_TYPE error-Urgent!!
    Next time you might want to just search the forum first... lots of surprises!
    Hope this helps,
    Cheers,
    Gimmo

  • Error when activating the master data

    Hi
    I am getting the following error when activating the master data. when using IDOC as transfer method in transfer rules
    <b>Error while creating table 'EDISEGMENT' entry '/BIC/CIRB0CLASS_NUM_TEXT'</b>
    If anyone came across this kind of problem plz share the solution.
    Regards
    Annie

    Hi
    I solved the problem. AFter changing from PSA to IDOC, i just saved first and activated. it got activated. But thanks for the response.
    There are no short dumps in ST22
    Regards
    Annie

  • Hello! I want to set up an appointement with Genius Bar but when i choose the available date and try to confirm there is this message appears : We're sorry. There was an error processing your request. Click OK to try again. HELP ME PLEASE

    Hello! I want to set up an appointement with Genius Bar but when i choose the available date and try to confirm there is this message appears : We're sorry. There was an error processing your request. Click OK to try again. HELP ME PLEASE

    I have called the store with the same problem but the answer is this must be done on line. I was told to use a different browser but it has made no difference - I am still having the same problem

  • Read error when reading the master data of 0EMPLOYEE on demand, attribute 0

    Hello All,
    While loading data for HR data source 0HR_PA_OS_1 i am getting the below error message..
    Error 1 in update.
    Read error when reading the master data of 0EMPLOYEE on demand, attribute 0COMP_CODE
    Please let me know how can it be resolved.
    Regards
    Rohit Parti

    The problem occurs during data load from R/3. It was not occuring before. When I go to check the PSA contents I get a runtime error - GETWA_NOT_ASSIGNED.
    Error analysis                                                      
        You attempted to access an unassigned field symbol              
        (data segment 32821).                                                                               
    This error may occur if                                         
        - You address a typed field symbol before it has been set with  
          ASSIGN                                                        
        - You address a field symbol that pointed to the line of an     
          internal table that was deleted                               
        - You address a field symbol that was previously reset using    
          UNASSIGN or that pointed to a local field that no             
          longer exists                                                 
        - You address a global function interface, although the         
          respective function module is not active - that is, is        
          not in the list of active calls. The list of active calls     
          can be taken from this short dump.

  • I can t use my time capsule with time machine. When I choose the disc (Data) in System Preferences, appears the color wheel and no response. Any help?

    When I choose the disc (Data) in System Preferences, appears the color wheel and no response. Any help?

    See  >  Using Time Machine with a Time Capsule
    From Pondini’s excellent Information Here...
    http://pondini.org/TM/Troubleshooting.htm

Maybe you are looking for

  • Cannot Delete Articles from Data manager..

    Hi Guru's, WHile delting record s from Data Manager I am getting Error " Insufficient disk space available on DBMS" and as a result i cannot delete reocrds.. What could be the issue? Please let me know if ican take help of our Basisi admin team .. Or

  • User status in sales orders

    Hi all! Can anyone tell me if there is a way to control the possibility of changing a sales order through the status? I wanted that when a sales order reaches a certain user status, for it to be blocked to modifications, as if it was display only...

  • HDMI overscan to HDTV issue on x120e

    I get very annoying overscan when i hook my x120e up to my Samsung UN55C6500 via HDMI. It's fine via VGA, but not via HDMI. CCC has no setting (that I can find) to fix the issue. XBMC has it's own overscan correction so it's fine but win7 is very fru

  • Problem with forward reference

    Java requires that the declaration of a field must occur before its usage in any initializer expression, if the field is used on the right-hand side of an assignment in the initializer expression class NonStaticInitializers {      int sqSide = height

  • Exporting & Importing Class Objects

    Hi. I want to migrate Class Objects from a CMSDK's instance to another. Maybe I can use CAT and PUT cmdline commands to do the job. I make some tests using CAT but I dont know how to redirect the data displayed on the screen to a xml file. Any ideas?