Do i need to reinstall office when we change volume licensing to O365

Hi,
We have Office pro plus installed and licensed with open value licensing. Now we have plans to order O365 midsize plan.
Do we have to reinstall all desktop offices or could we use that office version what we have installed under volume licensing?

Which version of your Office Pro Plus? Office 2013 ProPlus or Office 2010 ProPlus?
If it is Office 2013 ProPlus, you can use the current Office 2013 with Office 365.

Similar Messages

  • Need to reinstall office 11

    Ok, I lost my imac 2010 to flood from Sandy, but the drive was saved. Water never hit it. It works fine in voyager enclosure. It was bought with office 11 preinstalled by apple. I have copied over to the new imac but when I try opening it a window ps up saying I need to reinstall office. I cannot find any activation codes in any emails and cannot figure out how to download and install a new copy. Is there a way to do this without having to buy another license again?

    I was able to find my office 11 disk outside on the deck after the hurricane, and I was able to find my product key. I just wish Apple would have the product key for all software listed along with the serial number for the computer that it was preinstalled so it can easily be obtained if needed.

  • Received a message today that iTunes needed to reinstalled but when attempting to do so I get a message 'Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services'  ???

    Received a message today that iTunes needed to reinstalled but when attempting to do so I get a message 'Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services'  ???

    I am having this same problem. I took Kappy advice on restarting the Apple Mobile Device Service, however that did not work. I got this message in a pop up window that came up immediately.
    Windows could not start the Apple Mobil Device Service on local computer.
    Error 1053  The service did not respond to the start or control request in a timely fashion.
    I have already uninstalled itunes, all the related programs and I cannot reinstall, this Apple Mobil Device message stops the install.
    Can anyone please help?

  • Do Need to reinstall office and iLife if i upgrade to Mac OS 10.6?

    Do i need to reinstall Office 2008 and iLife if i upgrade my software from Mac OS 10.5 to Mac OS 10.6??

    if you do the "normal" upgrade, all you apps should still be available. If you did an erase first, then you will have to reinstall them. BUT, BEFORE you do the install, create a bootable backup, just in case anything happens (very rare, but why temp fate).

  • I need help reinstalling office for my iMac

    I need to reinstall Office 2011 for my iMac. I downloaded it off the web and do not have the email that has the product key. I have found out how to uninstall it, but need to know how to reinstall it.
    Thank you

    Since Office is not an Apple product, contact MS support or post your question on the MS Mac forums, as this forum is for troubleshooting apple software update for Windows, and not related to MS Office in any way.  The MS Mac forums are where the Mac Office gurus hang out.
    http://answers.microsoft.com/en-us/mac

  • Ipod touch 3 Screen shows the need to reinstall. but when connected to itunes is no longer recognized and itunes pops ask for a code....help!

    this is the message i get from itunes
    Itunes could not connect to "ipod of ...." (so, it looks like it understands which ipod is trying to connect) because it is protected by a code. Prior to use ipod with itunes you need to digit the code (where?? )
    please help!

    Try here:
    iOS: Device not recognized in iTunes for Windows
    Also include manually placing the iPod in Recovery mode and then try a restore
    Then try DFU mode and restore.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Further, try another computer to help determine if yu have a compter or iPod problem.

  • How do you stop F11 and F12 beeping when I change volume?

    I've looked in the systems preferences but I cannot find an option to turn this beep noise off, anyone know?

    You're welcome, glad to have helped & thanks for the star
    Steve

  • No on screen display when i change volume from quick touch

    i recently installed windows vista ultimate on my laptop. i installed all the drivers listed on the hp website. everything is working fine except that whenever i change the volume from the quick touch on the keypad there is no on screen display. the volume does get  changed.

    here the link
    http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio/HP-dv6-2174tx-Onscreen-touch-volume-control...

  • I need to reinstall the system software on my older iMac. I have lost the system disks, though... so now what? It had 10.4.

    I need to reinstall the system software on my older iMac. I have lost the system disks, though... so now what? It had 10.4. We moved, and I have looked everywhere. Am I doomed to find a way to buy it? Can taking it into the Apple Store fix it? Will it be expensive THERE? I've already saved all of the files I want off of it.... I just need it to work now.

    You've lost me on why you need to reinstall Tiger, when you already have all the files you wanted (which means Tiger worked perfectly fine). If you want to upgrade to Leopard, that's a different issue: your Mac needs to meet the minimum system requirements for that, which you can easily determine.
    If you just want to get a replacement set of Tiger install discs, you can try calling AppleCare and see if they're able to send you a replacement set, and if not, you'll have to buy a new set yourself. You can get them on eBay, Craigslist, and HardCore Mac (http://store.yahoo.com/hardcoremac/), although they sell it for ridiculous prices.
    < Edited by Host >

  • Reinstalling office 365 home premium !

    I had purchased office 365 home premium in sep-oct 2013, as there was hardware problem, need to reinstall office 365 but I do not have password key which was shared at the time of purchase....what's the right method to reinstall the same.

    Hi,
    your Office365 purchase is attached to the Microsoft account established by you, at the time.
    You need to login with that particular Microsoft account you used, to access your entitlement.
    Your Microsoft account is like an email account, and has a password.
    I purchased Office 365 Home.  How do I install Office on another computer?  
    - If you purchased Office 365 Home or Office 365 Personal, you can reinstall Office at any time at
    office.com/myaccount by signing in with your Microsoft account.  You do not need your Product Key to reinstall or install Office on additional computers.
    https://officesetup.getmicrosoftkey.com/Default/FAQ
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • Error initializing Java Runtime Environment.  You may need to reinstall Flash.

    ...This is really annoying.
    I work with adobe cs5. Recently, it started to not work. I would have to restart it over and over to get it to compile an swf properly. So I am trying cs5.5. I get this error "Error initializing Java Runtime Environment.  You may need to reinstall Flash."
    So im like OK....Thats helpful....
    -reinstalls flash-
    "Error initializing Java Runtime Environment.  You may need to reinstall Flash."
    -reinstalls java-
    -reinstalls flash-
    -reinstalls adobe flash cs5.5-
    "Error initializing Java Runtime Environment.  You may need to reinstall Flash."
    -google-
    So I come across this post. Follow it exactly.
    "Error initializing Java Runtime Environment.  You may need to reinstall Flash."
    I change the thingy in the file to Xmx1024M
    "Error initializing Java Runtime Environment.  You may need to reinstall Flash."
    I come to the forums.
    What do I do now?

    Intro:
    Finally I got near to roots of that mysterious Error
    "Error initializing Java Runtime Environment.  You may need to reinstall Flash."
    So here is what I'm found out + Bugfix
    JavaPatch for Adobe Flash CS5 / CS6...     Ver #1 [ 21.01.2014 ]
    ======================================
    This is the fix the bug in Flash tell you all the time that
    Java could not be loaded. The effect of this error is that
    Actionscript will not work.
    Flash gives a little misleading error messages that tells you that
    "There is no Actionscript in the current Project"
    background information:
    The problem is that the Java Virtual Machine.dll demands on startup
    250MB huge contiguous memory blocks, but the 2GB-Virtual address
    space of the Flash.exe process is already filled with various loaded dll's
    BEFORE you continue ensure that you install/copied JRE 1.8.0 update 31 to
    %ProgramData%\Adobe\CS5\jre\
    For testing check if ...Adobe\CS5\jre\bin\java.exe starts
    (and shows a help about available commands)
    The Patch is for 32-bit version only!
    (however the problem is probably not in the 64-Bit Version - since there a process has a much large more 'space')
    Well SIMPLE FIX / Workaround:
    Use 64-Bit version of Adobe Flash !
    TechDetails:
    Java's JVM.dll loaded in Ollydebug -  The patched / change bytes are red.
    ^-Note that String ASCII "NUMA page alloc..." - will be a great 'link' to easily find that location in other JVM-versions to applied the patch there. Open jvm.dll in Ollydebug open String Ref. Windows and search for the string...
    Download instructions:
    Right click on picture above and download it.
    Drag/open  the *.jpg in / into Winrar / 7-Zip 
    OR
    Rename 'Flash-CSX-jvm-JavaPatch #1.7z.jpg' -> 'Flash-CSX-jvm-JavaPatch #1.7z' so you open it by doubleclick
    -> My creative solution for that A-Dope-board missing 'Attach file feature'
    Tested:
    with Adobe Flash CS5 + JRE 1.8.0 update 31
    More Techstuff:
    Some of my notes that might be useful:
    Note the memory is not real allocated in the way it can be use since to write or read from it is just allocated as
    MEM_RESERVE like you see in the screenshot above. And freed just a little alter.
    It seems that java just checks if it could possible the maximal the JVM is made for.
    Note the problem is not that you have to less physical RAM installed.
    It's more related how memory is organise.
    Well in 32 Bit each process has 4GB (or well practically Windows limits this to 2GB).
    0x00000000 to 0x7FFF0000
    This space is virtual and not actually claimed (else you would very quickly run out of RAM) but it a kind of potential or Adress system. Na sorry that'll be to offtopic to explain all the basic's about memory.
    Adobe Flash CS5 calls
    jvm.dll!JNI_CreateJavaVM( OUT **p_vm, OUT **p_env, IN *vm_args);
    The 'vm_args'
    typedef struct JavaVMInitArgs {
        jint version;  00010004
      1. /* user classes */
      -D java.class.path=
      C:\Program Files\Adobe\Adobe Flash CS5\Common\Configuration\ActionScript 3.0\;
      C:\Program Files\Adobe\Adobe Flash CS5\Common\Configuration\ActionScript 3.0\asc_authoring.jar;
      C:\Program Files\Adobe\Adobe Flash CS5\Common\"...
      2. /* set native library path */
      -D java.library.path=
      C:\ProgramData\Adobe\CS5\jre\bin
      3.
      -D java.Home=C:\ProgramData\Adobe\CS5\jre
      4. classpath append
      -X bootclasspath/a:
      C:\Program Files\Java\jdk1.7\jre\lib\ext\QTJava.zip
      5. Headless mode is a system configuration in which the display device, keyboard, or mouse is lacking. Headless mode support has been available since the J2SE 1.4 platform.
      -D java.awt.headless=true
        jboolean ignoreUnrecognized; 1
    } JavaVMInitArgs;
    So for any further exploration about this Java problem setting a breakpoint to 'JVM.dll!JNI_CreateJavaVM' will be a great startpoint

  • Beats audio no longer shows a display when i turn volume up and down pavilion dv7 win7

    my pavilion dv7 used to show a display when i changed volume.  it no longer shows up.  volume works fine.  i can open beats audio just fine.

    Hi,
    Try using Recovery Manager to reinstall HP Quick Launch Buttons - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the relevant document on the link below.
    Recovery Manager - Windows 7
    Recovery Manager - Windows Vista
    After the reinstallation has completed, restart the notebook.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Office 2013 Volume licensing Activation using VAMT

    Can we activate office 2013 pro plus volume license edition using VAMT 2.0

    I found a confirmation on this link:
    http://blogs.technet.com/b/office_resource_kit/archive/2013/01/30/volume-activation-of-office-2013-frequently-asked-questions.aspx
    Why would I want to use Volume Activation Management Tool (VAMT) 3.0 rather than VAMT 2.0?
    In addition to KMS and MAK activation, which VAMT 2.0 supports, VAMT 3.0 supports Active Directory-Based activation. For general information about VAMT, see
    Manage Activations Using the VAMT. For more information about VAMT 3.0, see
    Introduction to VAMT 3.0.
    The quoted article doesn't confirm the question asked.
    The quickest way to confirm if VAMT2 is suitable for Office2013 is to test it.
    Even if it *does* work, it may not be "supported" by MSFT.
    I've asked a MSFT contact this question, it may take a few days to get an answer. (and, the answer might be "it's not supported"..)
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • Can someone please help. I have a really old MacBook that is running really slow. I want to wipe everything and reinstall the latest software but don't know how to do this. Also is there a way of keeping Microsoft Office when doing this? Thanks in advance

    Can someone please help. I have a really old MacBook that is running really slow. I want to wipe everything and reinstall the latest software but don't know how to do this. Also is there a way of keeping Microsoft Office when doing this? Thanks in advance

    You do realise that wiping the disk means that everything on the disk is erased. Everything. Photos, music, emails, ...
    So the first piece of advice is to make sure you have a back up of everything.
    You need the OS disk to reintsall the operating system. You will use that disk first to erase the drive, then to reinstall the OS.
    Here's the link for the US.  http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    As for MS Office, you will need the original disk that it came on to reinstall it.

  • When I upgrade to Snow Leopard, do I need to reinstall all of my programs?

    When I upgrade to Snow Leopard from OS x 10.4.11, do I need to reinstall all of my programs, such as Microsoft Office Suite?

    I, like you, did an upgrade from 10.4 to 10.6 on my iMac. It was the simplest ever upgrade! Everything was left intact. It really just changed the System Software. I did need to go in and change some preferences to my preferences, but that was about it.
    I speak from experience, rather than trying to pass myself off as an expert.
    If you can, get a copy of "The Missing Manual" for Snow Leopard. It covers the upgrade as well as other features of 10.6

Maybe you are looking for

  • Family shareplan upgrade

    I have 5 lines on a family shareplan. The main number contract expires in 8/11. Theother 4 lines expire before that. One line is eligible for an upgrade now but I do not want to lock in to another 2 years because of the mandatory data plan which we d

  • Error Messages transmitted to r/3

    Hi, I need to inform R/3 for any error happening in Integration engine or adapter engine. As alerts can be used only via Email, i need a way where i can transmit these error messages to R/3 database table. Regards, Krish

  • Splitting an array

    Hi guys, I am trying to modify a program at work with LabVIEW, but I am only a beginner at it so I am having a few problems. Basically, it is a data acquisition program that gets it data from accelerometors. The data is read using the AI read functio

  • Won't print from InDesign/Acrobat CS3

    I have the strangest situation with an install of CS3 Standard edition on a 10.4.9 iMac C2D and printing from InDesign and Acrobat. I installed this last week on 3 iMac's. One older G5 iSigh iMac, and 2 C2D iMac's. Everything went fine, untill on one

  • Problems with my mp3pla

    well i got creative normad jukebox zen 20gb used in mint condition and it has music on it and stuff and i am not able to put music on it the programs are not working i need help