Do i need to remove my case or skin when changing?

After reading that temperature is important when charging, I was wondering whether I should remove my case when charging to prevent excessive built up of heat but won't this make the nano vulnerable to scratches?

It depends on how much heat is generated. Removing the case will help dissipate the heat.
Heat shorten battery life.

Similar Messages

Need to remove space for a field when displayed in ALV Report

Hi,
I have material field of length 18, but the content is only 10 char. I need to remove the extra space when it is displayed on ALV Report.
Is there any option in ALV field catalogue

use statement condense.
condense zmatnr.
also giv output lenth of alv column as 10.

Do i need to remove the micro sim card when using home wi fi on ipad2

do i need to remove the micro sim card from the i pad 2 when using wi fi sat home?

thank you Ralph may i just ask you if your home wifi network is not working do you then have to actively seek the data connection?i suppose i am asking do you need to choose from a menu ?

I have a report in upper case, I need it in lower case, how do I change it with out typing it over?

I have a report in upper case and I need it in lower case. How do I change it to lower case with out typing the report over?

You are using Pages for iPad I take it?
Pages does not have a case conversion function. The one under the Format menu switches Unicode glyphs as part of a style but requires the text to be originally in lowercase.
Go to the App Store and see what you can find as a 3rd party converter. I don't have it but am sure there will be a TextEditor of some description to do the job.
Peter

Need to remove flash movie controls ( skin )

using Dreamweaver 8 - have imported an flv file into a
standard html page and it all works great when I publish - my
problem is DW 8 is making me choose a skin and the skins controls (
play RW, FF, ect..) semi transparent as they are, are directly over
some text of the movie. How do I tell DW I do not want a skin or
that I do not want any controls?

> DW 8 does not provide me a _no skin_ option
That's the thing. You've identified the problem. Dw doesn't
offer a no skin
option for this. It is not an option.
There is no option when importing an flv into dw to have no
controls show.
There isn't a choice to not have controls show if you use dw
to import an
flv.
do you need any other re-wording of the basic fact?
The message thread is kind of at the point of explaining that
it's a an
ex-parrot.
If you want to ask for this to be included in dreamweaver in
the future,
search on the adobe.com for dreamweaver wishlist.
If you do these operations IN FLASH instead of using the
Import flv menu
choice in dreamweaver, you WILL have a way to have no
controls on the skin.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Need to remove 32SL410U Toshiba Television Receiver case

I need to replace antenna/cable plug on 32SL410U Toshiba, but first step is to remove the case. I have removed each of the screws marked on the back and have also removed the base and screws hidden under the base.
The cover is still attached somewhere that I cannot locate. Is there a special tool needed to get the cover off? What are the pair of unmarked fittings that are also through the cover - they do not appear to be hex keyed or torx.
Any tips or tricks to get this open without breaking something?
I have scoured the web for this info with no success.

Manny:
Your iBook has a 2.5" Parallel ATA/IDE HDD. Place it in a firewire enclosure like this one connect it to another Mac via firewire and retrieve your data.
cornelius

[JS] Need Help Removing File extension (in CS2 and CS3)

Hello All.
I have a menu in a dialog that needs to list some file names, but without their file extensions (which will always be .txt in my case). The following is some code that successfully does this in CS3, but I also need it to work in CS2. Do you have any other ways to do this? One code that works in both versions (CS2 and CS3) is ideal.
myNameWithoutExtensionFunction = function( myNameWithExtention ) {
myNameWithoutExtension = myNameWithExtention
myEndOfFileName = myNameWithoutExtension.lastIndexOf( "." ) // get the last period (.) in the filename
if ( myEndOfFileName > -1 ) {
myNameWithoutExtension = myNameWithoutExtension.substr( 0, myEndOfFileName )
return myNameWithoutExtension
Thanks in advance.
Dan

I realized my mistake. The above code works just fine in CS2. My mistake was elsewhere. The name I was sending to this function wasn't being recognized by CS2. Once I corrected that and sent a valid name to this function it worked. So in case someone needs to remove file extensions, feel free to use the above function!

My new iPhone 4 will not play on the iHome iP1 Speaker System. I have removed the case and seated it properly and it charges, but does not play music. How can I get it to work?

My new iPhone 4 will not play on the iHome iP1 Speaker System. I have removed the case and seated it properly and it charges, but does not play music. How can I get it to work?

Hi there Graham!
I have a couple of articles that can help you troubleshoot this issue. First, if you are downloading HD content, you will need to know the system requirements for HD playback, which can be found here:
iTunes: Purchasing and viewing HD videos
http://support.apple.com/kb/ht3209
Next, you will want to check your video playback settings on your Windows machine. The steps for that can be found right here:
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/TS1718
Hope that helps. Thanks for using the Apple Support Communities!
Cheers,
Braden

Do I need to remove the application?

I am working on iPlanet 6.0SP4.Do i need to remove the old application when I redeploy the new one. Because there is also an option called "override" when doing the deployment, what that mean?
If I didn't remove the application, and redeploy with override option, is it possible that two same classes will be stored in the ldap server with different id

Hi,
See when you deploy any ear application it first copy it in "<iAS-install-dir>/ias/JAR" dir and extract all the war/jar modules in it. And after it picks the modules from here and explode in respective directory under "<iAS-install-dir>/ias/APPS or .../APPS/modules". When you say Override modules, it replaces all the old modules having the same name with the new one and then explode them.
Moreover when you deploy any module it will make entries in LDAP under "Application server/6.0/J2EE-Modules/<war/jar-module-name>" and for each Servlet/JSP/EJB under "Application server/ClassDef/<GUID>".
So when you redeploy same application again and you don't change the module names then it will overwrite this registry information as the module names and GUID is same (in this case you have to restart iAS). But if you reassemble application using deploytool, then it will create new GUIDs for each components in your app and the second entry will be change in this case.
Now when ever plugin will send the request for the new app it will read GUID from the "J2EE-Modules/<war/jar-module-name>" node and will send it to the KXS and the KXS will see what class to load after looking at "ClassDef/<GUID>" node.
If the modules have the same name as original Application, then the old GUID entries in registry are of no use and will make iAS slow only as it reads the whole registry while starting.
Please feel free to ask further questions.
Sanjeev,
Developer Support, Sun ONE Application Server-India.

I previously had PS CS5 Trial installed but removed it using both Control Panel Programs and deleting all files from the CS5 directory on Program Files. I then installed a purchased product from Adobe disc using the serial number on the case. But when I

I previously had PS CS5 Trial installed but removed it using both Control Panel Programs and deleting all files from the CS5 directory on Program Files. I then installed a purchased product from Adobe disc using the serial number on the case. But when I try to launch it, I get a screen headed Photoshop CS5 Extended Trial. It asks for the serial number and says that my trial has expired. It rejects the serial number from the Adobe case saying "This Serial Number is not valid for this product". It thinks that I still have the expired Trial Version installed. How do I convince it (the program) that the Trial Version is long gone and the currently installed product was installed with a valid and accepted serial number????

Let me know how it goes. Go into your Adobe account and register your serial number asap.
https://www.adobe.com/account/my-products-services.html
That way, should you lose it or you need support, it is on record that it's yours and you can fetch your s/n it from anywhere.
There are too may sad stories here, where people forgot and the box is buried or lost.
Gene

Do I need to remove Bootcamp Partition before restoring with Time Machine

Hello - anyone familiar with this scenario.
I have used TIME MACHINE from the very first day I had my iMac. So it was started almost immediately after the initial boot of a brand new iMac case I ever needed to restore my Mac to that initial Day 1 state.
That day has come, but it's now two years, and in that time I have installed BOOTCAMP, Parallels and Windows 7. That process created another partition, and created the required 'links' between my OSX and Windows via Parallels etc.
So my question is this - can I do a 'Restore from Time Machine' over the top of the new partioned set up of my iMac OR or will it be now totally confused because of the changes I have made to my system in that time, and do I firstly need to remove Windows, Bootcamp, and erase the partitions I created back to one.
So in summary - will Time Machine do this when it restores, or do I need to do it before I restore?
I also have a CARBON COPY CLONE from Day 1 too. Am I better using that instead - and if so, same question - will i need to remove Windows, and my Bootcamped partion first?
(My system is iMac late 2012 still running OSX Mountain Lion if that makes any difference)
Thanks

popsynic wrote:
Hi - thanks for responding
"Is Parallels using the BC partition as a VM, or is it a separate VM with its own virtual disk?"
I don't know - basically I have a BOOTCAMP partition and Windows is installed on that (using these instructions from the Parallels website) I can then either open up Windows from in OSX Moutain Lion while keeping my mac running (and windows will run in its own little window - but within OSX. OR I can also choose to boot dircetly wi windows when I tuen on my MAC - and then it runs independently of my OSX.
You are using the BC Windows and running it as VM. There is no separate VM with virtual disk.
"Are you planning to erase the internal drive(s)?"
I wasn't sure - I want to restore my iMac like it was on the day I had it, before I partitoned BOOTCAMP and installed windows. So my question is, will the TIME MACHINE restore get rid of WINDOWS and the BOOTCAMP partition for me as part of its restore - or do i have to that, and then restore using Time Machine
It is much simpler to run BC Assistant and use the last option - "Remove Windows". It is a bit cleaner.
"If the backup on TM which started on Day 1 has continued as you have made changes, including BC/Windows/Parallels, it has continued to backup OS X and partition information. I suggest you backup Windows using Windows Backup to a separate external drive formatted as NTFS, and also consider Winclone or CampTune for a OS X compatible BC backup, if you run into any issues."
As above, I am not bothered about keeping Windows or the BOOTCAMP partition, I want to resore my iMac to the DAY 1 status - when I did my first full Time Machine backup - which was before I created a Bootcamp partition or installed Windows.
I suggest removing Windows via BCA and backing up to Time Machine. You will keep you OS X intact and keep all your files on the OS X side.

Do I need to remove Bootcamp before Time Machine Restore?

Hello - anyone familiar with this scenario.
I have used TIME MACHINE from the very first day I had my iMac. So it was started almost immediately after the initial boot of a brand new iMac case I ever needed to restore my Mac to that initial Day 1 state.
That day has come, but it's now two years, and in that time I have installed BOOTCAMP, Parallels and Windows 7. That process created another partition, and created the required 'links' between my OSX and Windows via Parallels etc.
So my question is this - can I do a 'Restore from Time Machine' over the top of the new partioned set up of my iMac OR or will it be now totally confused because of the changes I have made to my system in that time, and do I firstly need to remove Windows, Bootcamp, and erase the partitions I created back to one.
So in summary - will Time Machine do this when it restores, or do I need to do it before I restore?
I also have a CARBON COPY CLONE from Day 1 too. Am I better using that instead - and if so, same question - will i need to remove Windows, and my Bootcamped partion first?
(My system is iMac late 2012 still running OSX Mountain Lion if that makes any difference)
Thanks
OS X Mountain Lion (10.8.4), i7 / 3TB Fusion Drive / 24GB Ram

popsynic wrote:
Hi - thanks for responding
"Is Parallels using the BC partition as a VM, or is it a separate VM with its own virtual disk?"
I don't know - basically I have a BOOTCAMP partition and Windows is installed on that (using these instructions from the Parallels website) I can then either open up Windows from in OSX Moutain Lion while keeping my mac running (and windows will run in its own little window - but within OSX. OR I can also choose to boot dircetly wi windows when I tuen on my MAC - and then it runs independently of my OSX.
You are using the BC Windows and running it as VM. There is no separate VM with virtual disk.
"Are you planning to erase the internal drive(s)?"
I wasn't sure - I want to restore my iMac like it was on the day I had it, before I partitoned BOOTCAMP and installed windows. So my question is, will the TIME MACHINE restore get rid of WINDOWS and the BOOTCAMP partition for me as part of its restore - or do i have to that, and then restore using Time Machine
It is much simpler to run BC Assistant and use the last option - "Remove Windows". It is a bit cleaner.
"If the backup on TM which started on Day 1 has continued as you have made changes, including BC/Windows/Parallels, it has continued to backup OS X and partition information. I suggest you backup Windows using Windows Backup to a separate external drive formatted as NTFS, and also consider Winclone or CampTune for a OS X compatible BC backup, if you run into any issues."
As above, I am not bothered about keeping Windows or the BOOTCAMP partition, I want to resore my iMac to the DAY 1 status - when I did my first full Time Machine backup - which was before I created a Bootcamp partition or installed Windows.
I suggest removing Windows via BCA and backing up to Time Machine. You will keep you OS X intact and keep all your files on the OS X side.

HPE-270F PC - need to remove wireless card. Has wires attached to top of cage. Need to discuss

Need to remove wireless card but has three wires attached and two are cttahed to top of case.
Assume they are for receiption. Instatting TV tuner and need to slot.
Any issues cutting and removeing these wires. Can send photo if needed to resolve issue

As you guessed, those are antenna wires. Don't cut them just pull them off the card, wrap each in a piece of electrical tape and push them up and out of the way. You might want wireless again someday. The connectors can be removed by turning 90 degrees and just disconnecting from the nipple on the card. I do see this is a desktop. Maybe a picture would help.

G4 Ti4200-TD8X, need to remove fan + freezing

Hihi..
I need to remove the fan on my GFX, but I don't know how - since I can't find something which looks like a screw, only some black rubber thingies which appears to go through the fan and all the way onto the back plating.
But I want to know how to remove it.
I also have a problem with freezing up.
It appears like overheating - but after reading a few threads on this board, I'm not really sure. Also looking upon the amount of cooling within my case, I can't see how it possible can be overheating.
My system specs are :
ECS K7S5A ATX motherboard.
AMD Athlon XP 2.2Ghz
640 SD PC133 rams (Noname)
MSI Geforce 4 ti4200 agp 8x 128DDR's (Running with agp 4x
400Hz PSU
Thermal take Silent Viking II (80x80 Fan)
Thermal Take Technology ThermalCase MidiTower (4 80x80(Metric) Fans, two backside, two frontside)
IRQ : (Only listing PCI)
5. Creative AudioPCI (ES1371, ES1371) (WDM)
5. MSI MS-Starforce GeForce4 Ti 4200 with AGP8X (NVIDIA GeForce4 Ti 4200 with AGP8X)
5. Realtek RTL8139 Family PCI Fast Ethernet NIC
5. SiS 7001 PCI to USB Open Host Controller
11. Multimedia Audio Controller (It is disabled)
11. SiS 900-Based PCI Fast Ethernet Adapter
12 SiS 7001 PCI to USB Open Host Controller
Please help.
~x~ Janine ~x~

Well I changed my cards around abit and ended up with an IRQ setting like this :
5. MSI MS-Starforce GeForce 4 Ti 4200 with AGP8X
5. SIS 7001 PCI to USB Open Host Controller
11. Creative AudioPCI
11. Realtek RTL8139 Family PCI Fast ethernet NIC #2
11. SiS-900 PCI fast ethernet adapter
12. SIS 7001 PCI to USB Open Host Controller
Now the problem within #5 - is that "SIS 7001 PCI to USB Open Host Controller" appears to be my USB ports, which are onboard and I can't just move them around like my Netcard and soundcard - my GFX I can't move either, since I only have one AGP slot.
It still does the same freeze up however.
Also, I would really like to know how to remove the fan on the GFX, since I can't really clean it properly if I do not remove it. (It's a little dusty, and it will decrease heating if I get it cleaned properly)
~x~ Janine ~x~

I will give my laptop to someone else, how do I unlink my apple id? Do I need to remove the apps I downloaded with my id?

I will give my laptop to someone else, how do I unlink my apple id? Is it just the app store unlink? Do I need to remove the apps I downloaded with my id? Will they get removed when I unlink my apple id?
Are there any other procedures I need to take into account?
Thanks

You need to remove all software that you acquired from the Mac App Store, including newer versions of OS X. These are all registered to you and encoded with your Apple ID in the licensed copy. You cannot legally pass any of the software to the new owner, which is why Apple states to erase the Mac and return it to the version of OS X that shipped from the factory on the Mac. You must also remove any older Apple software that you installed by DVD or pass the DVD to the new owner with the Mac.

Do i need to remove my case or skin when changing?

Similar Messages

Maybe you are looking for