Do I need to run "Change run" if I have no aggregates in the cubes

Hello
Do I need to run "Change run" if I have no aggregates in the cubes?
If yes, why?
thanks

Hi there,
As said the change run will activate the modified records from a master data of a characteristic.
If this characteristic is used in any aggregate then the change run will also rearrange the aggregates.
Diogo.

Similar Messages

I don't know what i need. I'am a mac user but i need to run quick books premier. This is the only software i need in windows 7. Could i have some advise in what is better for me, Bootcamp or parallels

I don't know what i need. I'am a mac user but i need to run quick books premier. This is the only software i need in windows . Could i have some advise in what is better for me, Bootcamp or Parallels

The Intuit rep said they don't "support" QuickbooksPremier on a "virtual machine." Do you know what I risk by using it, anyway? thanks for the advice about Boot Camp vs Parallels, BTW!
I use QuickBooks Pro for Mac, so I haven't had need to try any of the Windows versions in a VM. But I can't think why it wouldn't work. From within the VM, QuickBooks Premier would believe it is operating on PC hardware within Windows.
I would guess they mean that the multiple user support wouldn't work from within the VM. But I would think that would also work. Windows can see the Internet from within the VM, which means it can see your network. So if Windows can see the network, then QB Premier should be able to, too.
I know you can get Parallels as a demo, and maybe you could get QB Premier as trial software. So if you already have a retail copy of Windows to load into a VM, it would only cost you time to test what's possible.

HT201412 After upgrading my iPhone 4S to IOS 8, Opendoor App doesn't run. I have deleted and downloaded the app several time, but the problem still exists

After upgrading my iPhone 4S to IOS 8, Opendoor App doesn't run. I have deleted and downloaded the app several times, but the problem still exists

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Contact the developer/go to there support site
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

While using my iPhone the system behavior changed where I now have to click on the app to select it, then double click to launch it. Same goes for entering in my password to access the phone and entering digits to make a phone. I am also having trouble

While using my iPhone the system behavior changed where I now have to click on the app to select it, then double click to launch it. Same goes for entering in my password to access the phone and entering digits to make a phone. I am also having trouble swiping the screen to move to the next page. This is no longer working. I did not change any settings, the phone just started behaving this way. Any ideas on how to revert back to the single click selection/launch? Any assistant is greatly appreciated. Thank you!

Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

When I close out a website it goes to my desk top and then tells me firefox is running and I have to shut down the system

when I close out a website it goes to my desk top and then tells me firefox is already running and I have to shut down my system and bring it back up and wait to log back in. It's quite frustrating.

Try Ctrl>ALT>DEL then click Start Task Manager, then find the process firefox.exe, then click end program, then try opening Firefox again.  done! If that doesn't work, then try re-installing Firefox or going to this link to safe mode area and click continue to safe mode and then try and exit, if this problem still occurs then disable extensions and plugins

My phone was recently updated to 8.1. After the update, when text messages are sent when my phone is off, I no longer receive when my phone is turned on. Is there something in Settings that needs to be changed? I never had this problem before the updat

My phone was recently updated to 8.1. After the update, when text messages are sent when my phone is turned off, they no longer appear when I turn the phone on. Is there something in Settings that needs to be changed?

MetsFanGirl,
Thanks for verifying. Are you having issues receiving both iMessages and standard text messages when they are sent when the phone is turned off? Try this and test... http://vz.to/1qjiOs7
LindseyT_VZW
Follow us on Twitter @VZWSupport

EXISTING RUNNING FIREFOX PROGRAM. THERE IS NO VER OF FIREFOX RUNNING. I HAVE TRIED TO DELETE THE FOLDER TO NO AVAIL. HAD TO RESORT TO USING EI WHICH I HATE. CAN SOMEONE PLEASE TELL ME HOW TO RECOVER.

Firefox automatically updated my existing version. After the update things started to go wrong. I decided to update to the latest version 3.6.14 [was3.6], after downloding the 3.6.14, I started to run the update file, it got to the stage where it was checking the system & said I had to close an existing running file of firefox. Here the problem, there was no firefox running, under CTRL/ALT/DEL the task manager says the only task running was the firefox inst prog.? The Inst prog will not go past the "close firefox file that is running". Any help will be appreciated, because I don't want to be running EI for long. Regards, Allan.

The Apple ID and Password that was Originally used to Activate the iDevice is required
If you do not have that information you will not be able to use the Device.
Activation Lock in iOS 7 > http://support.apple.com/kb/HT5818

HT204150 I can't get my contacts back on my phone from my icloud. It's up and running and I have already turned on the contacts. The icloud online shows that I still have all of my contacts but they are not popping up on my phone.

I had my mom on my icloud through a different phone for the longest time and just took it off her phone today. Now all of my contacts have been erased from my phone. I went on the icloud online and it is showing that my contacts are still there, but they are not on my phone. I need help!!!

Go to Settings>iCloud and confirm that you are signed into the account that contains you conacts and that the contacts setting is turned on. Also open the contacts app and tap Groups (if you have this setting at the top) and make sure all your contacts groups are checked.
If they still don't appear, go to Settings>iCloud, turn Contacts off, choose Delete from My iPhone when prompted (they will still be in iCloud), then turn Contacts on again.
If they still don't appear, force-close the Contacts app and reset your phone: double-tap the home button, locate Contacts, swipe up on the image above the app icon to close it, tap the home button again. Then hold the power and home buttons at the same time until you see the Apple logo, then release and wait for it to restart. Then check your contacts again.

I currently have one input but need to run two loops. I cannot get the two while loops to run so that they both pick up the same data, they are both picking up alternate samples. How can I get them to both pick up all of the values?

The system I am trying to create calculates a number of values based on an input. I need to make the calculations and display the values for an entire production run and for each hour. The only way I know to do this is to create two while loops, one looking at all the values that are received and one looking only at the values for hour long periods.
Any help would be great.
Thanks
RossH

Why do you think that you have to have two loops to accomplish this task? Why not use one loop and accumulate the same data into two data sets based on the two sets of criteria?

BPC 7.5 Run package doesnt update new request into the Cube though

SAP BPC 7.5 NW - Run package
When I run a data package previously it was generating records for the data as a new request in the Plan Cube in the back end.
But since today though the package is successfuly it does not generate any new records or create a open request in the plan cube.
Lite Optimize didnt work.

Hi,
Could you please open up your transformation and try and validate the transformation with the data in your infoprovider. Have a limited selection and see if you can validate the transformation file successfully.
Thanks

I am trying to do a clean install of Snow Leopard on an Intel Macbook Pro. (Need to partition for Boot Camp) I have done it in the past so I know it works but whenever I select the install disk as the boot device it gets stuck on the Apple logo/pinwheel.

Prety much what the question says. HELP!

stephenfromlynchburg wrote:
No the mac had come with Leopard. Then I bought the snow leopard DVD and did a clean install of snow leopard.
If you just stuck the disk into the Leopard Mac and run the upgrader, you didn't do a "fresh install" you basically upgraded from 10.5 to 10.6 leaving all the programs and files intact.
The white Snow Leopard disk was the right one for that machine as it had Leopard (10.5) on it previously.
So you already have Snow Leopard installed, if you want to erase the entire drive (along with all your programs, files and OS X) and want to install Snow Leopard again, you hold the c or option/alt key down and boot the machine off the disk. Then use Disk Utiltiy to erase the entire drive, then quit and install Snow Leopard.
How to erase and install Snow Leopard 10.6
Once Snow Leopard is installed you log in and use Apple Menu > Software Update until clear to get to 10.6.8 and fix security issues.
Now I can't get it to do the install again.
To install Windows into BootCamp, you read and run the BootCamp Assistant located in the Applications > Utiltiies folder
It's important to change the drive format from FAT32 to NTFS before installing Windows using the Windows disk.
Windows is rather complicated to install, if you boot to a blinking line with "press any key to continue" you need to press and hold the power button down and reboot holding the Option/Alt key down to get back into OS X.
https://www.apple.com/support/bootcamp/
If your Windows programs are not going to be as CPU/GPU demanding, you may rather prefer to use a virtual machine instead
Windows in BootCamp or Virtual Machine?

I can't access a familiar site with firefox now. why do I have to change to IE. never have had to in the past

I watch a site NABC black bear cameras a lot. I have always been able to use Firefox. Lately it won't work. first it said it was adobe plug ins ...but I could then send crash report and reload page. Now none will load. But if I use Internet Explorer, it seems to be ok. I use Firefox for almost anything else, that will allow it, and was wondering, why, after all this time I can't now?
Have been watching this site for 2 years. and have had no trouble until now. Any help would be appreciated. Thank you.

I feel a bit like Im walking into the past, but Im having the same issue same site. I have Clear, and can open the site in chrome. Not however in Safari.
Im making an effort to Un- Google my world so help on this frontier would be great, The folks at Clear say "We just sell access, we don't block." I believe them, they're not comcast.
Checking in Safari- im told that the sight is down.
Thanks for any insight.
J

How much disk space is needed to run Boot Camp using Windows XP?

How much disk space is needed to run Boot Camp using Windows XP?

The hatter wrote:
But you can't install XP if you have a new Mac.
Try running XP in a VM or aquire Windows 7 which is the only one supported now.
And you will need more like 60GB for Windows 7, so I would skip on 20GB just to be safe.
20G is a fine minimum for XP, I was not responding to any inquiry about Win 7.

FI-AA Depreciation Run :what does I need to run depreciation (AFAB trans.)

I don´t know what I need to run depreciation, I have create a fixed asset, and I have done a posting f-90 , and afterwards I want to execute depreciation but I cannot ¿what does I need to do this ?
Thanks in advance.
Olga.

Hi,
First of all before running depreciation you need to give the required GL accounts needed for posting the depreciation to the GL accounts in T.Code AO90.
Then after doing the required configurations u can run a depreciation run only in the month end or in the next month for the previous month.
If u had posted transactions to an asset using F-90 say suppose in october, u can do the depreciation in the month of october or in the coming month.
hope it is clear.
regards
srikanth.

I need to run internet explorer how do i begin?

i have been fooling around trying to get this military website to work properly with no luck. after contact the help line for the website they told me it is only compatible with internet explorer. researching boot camp i purchased an external hardrive to partition for windows under the impression that that was one of the reasons why. i do not have a windows disk and i need to run IE. i tryed masking safari in the develop toolbar but IE isnt highlighted therefore i cant attemp that way. please help....
Matt

I don't know if this still works with the new version if Safari but it's worth a try.
Launch Safari. From the Safari menu bar top of your screen click Safari. From the drop down menu click Preferences then select the Advanced tab.
Select: Show Develop menu in menu bar
Now from the Safari menu bar again, click Develop > User Agent
Try IE 7, 8, or 9.

Do I need to run "Change run" if I have no aggregates in the cubes

Similar Messages

Maybe you are looking for