Do I need to set something when using Dynamic VIs to pass control values to an executable VI

I am using VI server to pass control information from one VI to another.
In the development system this works fine.
How ever once I build the VI's into an executable the values from one of the VIs does not get passed.
I use the same method in three different applications, 2 of the applications work fine, but one does not.
The only thing I can think of is that there is something that needs to be set that I did (without realizing) in the first two but not in the third.
All the Applications run fine.
The problem that occurs is in the values passed. The same value gets passed everytime this turns out to be what ever the default was prior to running application builder.
I a
m currently using 6.02.

Kandrew wrote:
> I am using VI server to pass control information from one VI to
> another.
> In the development system this works fine.
> How ever once I build the VI's into an executable the values from one
> of the VIs does not get passed.
>
> I use the same method in three different applications, 2 of the
> applications work fine, but one does not.
Are you using Call by Reference or Set Control Value method? The second
absolutely requires the Front Panel to be present to work properly. The
LabVIEW application builder wants to remove the Front Panel by default
if the VI hasn't been configured to show its front panel when called or
doesn't have at least one Control Property Node in its diagram.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Similar Messages

How to skip authorisation for infotype when using dynamic selection ?

Hi folks,
I have a problem here.
When im using dynamic selection screen, i cannot skip authorisation for subtypes of an infotype. Eg. if my record for 0185 have records that do not have authorisation for the subtypes. Dynamic selection will filter away this record and will not get me into the Get Peras as id i use to run has authorisation configured. IT will skip out of Get Peras.
However, if im not using dynamic selection screen, i will use the normal pnpce fields, i will be able to get the record, as i do my authorisation check using function module in the get peras, and i did not declare 0185 in the infotypes.
May i know if there is any solution to this problem as dynamic selection screen is a standard...
Thanks,
lihui

hi,
however i cannot skip authorisation for the whole pernr as i need the authorisations for the processing reports.
Currently the case is like this..
i have a authorisations for infotype 0185. i have 2 subtypes records such as ZA and ZB. the user does not have authorisation to read ZB but has authorisation to read ZA.
However, when use dynamic selection, it will skip out the pernr.
If the pernr 0185 records has only ZA subtype but no ZB subtype, it will not skip this pernr when using dynamic selection.
Anymore idea how to overcome this?

10.9.4: Graphical errors when using OSX functions like Mission Control, Spotlight

Device: MBP 15" Retina 2.3 GHz Intel i7
OSX: 10.9.4
Monitor: 27" Thunderbolt Display
Issue: When using OSX functions like Mission Control (Expose) and spotlight, I frequently get graphical errors that remain on the desktop unless I reset the computer. I can resolve the issue by adding a new desktop and dragging my windows over.
This happens almost every day.

You have installed all these non-Apple system modifications:
Kernel Extensions: ?
[loaded] at.obdev.nke.LittleSnitch (4052 - SDK 10.8) Support
[loaded] com.nvidia.CUDA (1.1.0) Support
[loaded] com.promise.driver.stex (5.2.7 - SDK 10.9) Support
[not loaded] com.silabs.driver.CP210xVCPDriver (3.0.0d1) Support
[not loaded] com.silabs.driver.CP210xVCPDriver64 (3.0.0d1) Support
[not loaded] com.wacom.kext.pentablet (5.2.6) Support
[not loaded] com.wacom.kext.wacomtablet (6.3.8 - SDK 10.9) Support
Litlle snitch has been a bad actor for some users.
You do not have any CUDA Hardware, so the CUDA Driver is not needed.
I do not know what siLabs driver thinks it may be driving.
You left the door open:
Gatekeeper: ?
Anywhere

Prompting for password and username only when using dynamic parameters

Post Author: Co3023
CA Forum: Crystal Reports
How do I stop CR XI prompting for password and username only when using dynamic parameters. When no dynamic parameters are used CR XI isn't prompting for the DB user name and password. The report is run from an application which passes the user name and password. I am using Oracle and the problem is both with the native oracle driver and the ODBC RDO driver.

Post Author: jehanzeb
CA Forum: Crystal Reports
I didnt ask you to change it to static I said I took the parameters totally out of the report. Saved it. Then re-enter the dynamic parameters into the report and it worked for me. That might have worked for you, not sure why you changed it to static.
Ok I have just created a quick report using dynamic parameters, it didnt ask me for the username password.
Can you create a sample report - just to test the db? and see if it works? add only 1 or 2 fields in the report, create parameters (dynamic) and see if it works
why don't you embed the username and password in your application, it won't ask for username password then.

CS 4 Dynamic Link to Encore doesn't work most of the time. Encore stops operating after opening and periodically Premier Pro stops working. I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's. Is there

CS 4 Dynamic Link to Encore doesn't work most of the time. Encore stops operating after opening and periodically Premier Pro stops working. I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's. Is there a way around this? Is there a patch to correct it?

To build CD's???
What problem does Encore have with DL?
If DL is not working properly for you the way around this is to export from Premiere to either mpeg2-dvd for DVD or BluRay H.264 for BD-disks and import the files in Encore.

How can I specify SMTP Email Server userID and password when using Email VIs?

How can I specify SMTP Email Server userID and password when using Email VIs included in Internet Toolkit?

Hi,
A similar question was posted on Discussion Forums soem time back. Please see the link below.
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=506500000008000000C7B00000&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0
You would find the last post in the above thread quite useful where it has a link to OpenG code. I am also copying that link for your reference.
http://www.openg.org/tiki/tiki-index.php?page=OpenG+Internet+Connectivity+Tools
Please feel free to respond to this post with any questions/comments you may have.
Regards,
Ankita A.
National Instruments

When use *"af:inputComboboxListOfValues"* partial trigger option, values no

Dear All,
When use *"af:inputComboboxListOfValues"* partial trigger option, values not refresh correctly.
My code steps as follows :
(Step 1). create as "af:inputComboboxListOfValue" attach a VO to it ...
<af:inputComboboxListOfValues id="lovDescriptionId"
popupTitle="Search and Select: #{bindings.Description.hints.label}"
value="#{bindings.Description.inputValue}"
label="Reason"
model="#{bindings.Description.listOfValuesModel}"
required="#{bindings.Description.hints.mandatory}"
columns="#{bindings.Description.hints.displayWidth}"
shortDesc="#{bindings.Description.hints.tooltip}"
binding="#{backing_pages_MainProfileAction.lovDescriptionId}"
disabled="false"
partialTriggers="soc3 si1 si2">
<f:validator binding="#{bindings.Description.validator}"/>
</af:inputComboboxListOfValues>
(Step 2). In a extrnal event change (say a button click) the VO data of above filted. So as a final case of this button action it should invoke partialTriggers.
But this not working...?
Please be kind enough to give solutions based on this case....
Thanks,
Sagara.

Dear Frank,
From your suggestion I research continued until today.
Thanks for your highlighted point. By that I could resolve about 80% of my problem.
There have to think another small area of regarding my entire problem.
In af:inputComboboxListOfValues only acsept view Accessor or LOV which based on a main VO.
So you say pass bind variable parameter value to ViewCriteria of LOV. I could do this & get filtered data to inputComboboxListOfValues.
But is ther way to pass value to this bind variable by programmatically?
(Currently I could do, pass value to the LOV ViewCriteria via field of main VO)
Sagara.

Need to avoid header When using GUI_DOWNLOAD with file type "DBF"

Hi ,
I am downloading internal table to excel on the desktop using GUI_DOWNLOAD with file type "DBF".
Internal table I use do not have any header.
But I do see the header in the downloaded file.
It displays 1 row as " F1 F2 F3..ETC" heading for each column.
Is there any variable we need to set to suppress header.
Thank you,
Kumar

Hello Dilip,
I tried using GUI_DOWNLOAD with FILE TYPE as "DBF", and i see the problem as mentioned. My question to you is:
1. Why do you need 'DBF' format?
2. Is it required to save the file as '.CSV'? Can you not try to save in '.XLS' file?
Plz revert back.
BR,
Suhas

Need help please. When using Safari while banking online I cannot get rid of Pop ups although I have ticket no Pop ups. Any ideas ?

Need your help please. When using Safari while banking online- I cannot get rid of the Pop ups although I have ticked the correct place. Any ideas ?
A few months ago I downloaded a program someone suggested.

Get Adblock or GlimmerBlocker.

Do I need to shut DB when using Veritas Backup Exec 10d w/ Oracle agent?

Hi All,
Do I need to shutdown oracle when we back up the database server using Veritas Backup Exec 10d with the Oracle agent?
thanks.

Not required !!

Need a secure network when using iPad

I have a iMac with an airport extreme card built in. I use a Westell 7500 DSL modem to connect to the internet. The modem has wireless capability. I can establish a wireless network using airport. I went into network preferences and set up WPA2 Personal security and entered a password under the network I am using, but the network is not password secured. When turning on aiport on the iPad, I join my network without having to enter a password. I want to have to enter the password on my ipad when using this network so I am sure others in the area will have to know the password to have access to my network.
Thank you

According to the information you provided, you want to add a security password to secure your network.
Your wireless network is created on your Westell 7500. So if you want to add a password to secure your network, you have to add it on the router settings, not on the iMac settings. If you're not sure how to do that, you have to contact your ISP (internet service provider) for further assistance.

Need to Set Node Attribute using XPath

Hi,
I have an XMLType coloum, I Need to Set/Update/Remove Root Node Attribute using XPath query.
Regards,
Rajesh

Here you go:
       Node nameNode =
                (Node) XPathFactory.newInstance().newXPath().evaluate(
                        "/root/name", doc, XPathConstants.NODE);
        nameNode.setTextContent("bob");

REDIRECT JDBC URL WHEN USING DYNAMIC JDBC CREDENTIALS SO NOT HARDCODED

I have taken over an application that uses row-level security and ADF (using
dynamic JDBC Credentials). I have been able to set the internal_connection to
a JDBCDatasource, but cannot set the Connection Type in the Oracle Business
Component Configuration to a JDBCDatasource. When I do, I receive errors that
tables are not found. When I set the value back to a JDBC URL, everything
works fine again.
I am looking for a solution where the userid and password are not hardcoded in
the BC4J.xcfg or a way to redirect this information, as we change our system
passwords every nighty days. Otherwise, I will have to redeploy the
application every nighty days.
I did not create this application, but I am sure that you could simply follow
the "How to Support Dynamic JDBC Credentials" article. From that point, you
will probably be where I am, where I have the internal_connection set to a
JDBCDataSource and working properly, but cannot set the Connection Type to
anything where the userid and password will not be hardcoded or cause failure.
I wanted to let you know that I have
found the updated How to Support Dynamic JDBC Credentials
(http://www.oracle.com/technology/products/jdev/howtos/bc4j/howto_dynamic_jdbc.h
tml) and was going to run through the "Advanced: Supporting Dynamic JDBC URLs",
but once I was done keying in
env.remove(ConnectionStrategy.DB_CONNECT_STRING_PROPERTY); I received a
depreciation message on the DB_CONNECT_STRING_PROPERTY. (Note: I am coding in
JDeveloper 10.1.3, so this may be depreciated as of then, but the ADF Libraries
for JDeveloper 10.1.3 are on our Oracle 10gAS 10.1.2 server.)
I thought maybe this would resolve my issue, but I can't be sure as the
deprecation message leads me to believe that this solution may not be viable in
the future.
UPDATE
=======
The article you are referencing is definitely an older version.
There is a newer article for 10g at:
http://www.oracle.com/technology/products/jdev/howtos/10g/dynamicjdbchowto.html
Please see if that helps.
I have already reviewed this article.
In fact, I have reviewed many versions of this document. I have not seen one
created yet for 10.1.3 though (especially without JSF as our 10.1.2 AS server
will not support it). I need to find an example or documentation that shows
how we can keep from having the JDBC URL stored in the BC4J.xcfg or a way to
use dynamic JDBC credentials with a JDBCDataSource. We do not want to store
the userid and password in the application, rather, we would like to setup
something that can be configurable from the application server.
I think we need to use the dynamic JDBC credentials because we are using the
row-level security, where we setup a database context for the user and only
allow certain records of a database table to be returned to the browser based
on that context.
Might there be a way to still use the JDBCDataSource?

I understand that the user provides the userid and password and that these values are setup using the Configuration class.
However, when I am to deploy the ADF Business Module with my application, I have to specify either a JDBC URL or a JDBC DataSource in the Oracle Business Component Configuration.
When I use JDBC DataSource, the code does not work properly, almost like the user's credentials are not used for the connection (I get errors like table or view does not exist).
When I use the JDBC URL, the bc4j.xcfg stores a reference in the JDBCName attribute to a ConnectionDefinition in the same file. It is in this tag of the bc4j.xcfg where the userid, sid, and password (encrypted) is stored and used when retrieving the initial context of the ADF business components.
It is these values that I want to have stored else where so that the application does not have to be redeployed in order for the password (or sid, or other connection information) to be change.

How to keep files from disappearing when using Dynamic link to AE in PremProCS4?

I am at my wits end here and hope someone can offer a solution. I use Dynamic Link in PremProCS4 to link a clip in my timeline to AfterEffects. I follow the instructions in my book and everytime I close my files and reopen..I loose the clip along with the effects...I get the place card instead. Here are the steps I do as per the Adobe Classroom in a Book Explains:
I double click on my .MTS file in the Project Board so it comes up on my Source Screen.
I take select the part of the clip I wish to use in my timeline and drag it to the appropriate spot on a video layer.
I then right click the "clip" and select "Replace With After Effects Comp"
I then name the new file. name or whatever.aep
It opens in AE
I then apply two simple effects... keying and a cartooning effect I use from NewBlue Cartooner.
As instructed I then go directly back to PremPro and do a "render" by pressing the Enter Key. This does not work since I only get a yellow bar above the clip instead of a red on???
So then I save the PremPro project and close it then go to the AE project, save and close it.
When I reopen PremPro the file has a place card in it and in AE it says I am missing a file.
I have tried many different ways to do this process including re-importing the .MTS file.
I can close PremPro and reopen it and all is the same as long as I don't close the AfterEffects project. Once AE is closed it looses the file. On a note here I keep all my computer source files in the same place and it never changes plus they are in my PPro Project as well. I never change the names so this isn't this reason.
Is there a tried and true method to select a piece of clip in the video layer in Prem Pro and add effects from AE and not have it misplace the files?
Thanks Kate

Hi Curt, and thank you for taking the time to respond.
Its odd how I've been trying to figure this one out for a long time and I tried your suggestion but it didn't make any difference..darn.
In the AE forum they say this is quite common and no one really knows why...double darn.
So I went back with a fresh mind this morning and tried something else..and it worked...so far anyway.
So far I figured it out... I guess I just needed to ask the question and write it all out to help get my brain working in the right direction:
Since the normal process to do this doesn't work for me ..and apparently many others..here is the solution for those of you having similar issues.
In PremPro select the desired clip you wish to place effects on
Rename it and save
R click and "Replace with AE composition"
Name new file
You will see three files pop up in AE in the project panel.
The original source clip .. in my case.. shows an icon that lets me know it isn't the true file.
Highlight this file with a click and then go Ctrl H (for PCs)
The group of computer source clips you use for your project will come up.. double click on the original clip you had imported into your PPro project.
The source file icon in AE will change to an icon that denotes the true file...save
Go to your still open Ppro project and make sure it carried the effects over..save.
Now you can save and close the AE project.
So for this works for me today and I hope this helps anyone else dealing with a similar issue.
Thanks.

How to keep files from disappearing when using Dynamic link to AE from PremProCS4?

I am at my wits end here and hope someone can offer a solution. I use Dynamic Link in PremProCS4 to link a clip in my timeline to AfterEffects. I follow the instructions in my book and everytime I close my files and reopen..I loose the clip along with the effects...I get the place card instead. Here are the steps I do as per the Adobe Classroom in a Book Explains:
I double click on my .MTS file in the Project Board so it comes up on my Source Screen.
I take select the part of the clip I wish to use in my timeline and drag it to the appropriate spot on a video layer.
I then right click the "clip" and select "Replace With After Effects Comp"
I then name the new file. name or whatever.aep
It opens in AE
I then apply two simple effects... keying and a cartooning effect I use from NewBlue Cartooner.
As instructed I then go directly back to PremPro and do a "render" by pressing the Enter Key. This does not work since I only get a yellow bar above the clip instead of a red on???
So then I save the PremPro project and close it then go to the AE project, save and close it.
When I reopen PremPro the file has a place card in it and in AE it says I am missing a file.
I have tried many different ways to do this process including re-importing the .MTS file.
I can close PremPro and reopen it and all is the same as long as I don't close the AfterEffects project. Once AE is closed it looses the file. On a note here I keep all my computer source files in the same place and it never changes plus they are in my PPro Project as well. I never change the names so this isn't this reason.
Is there a tried and true method to select a piece of clip in the video layer in Prem Pro and add effects from AE and not have it misplace the files?
Thanks Kate

Hi Mylenium, and thank you for taking the time to respond.
Your idea of renaming comps got me to thinking..hmm.
So I went back with a fresh mind this morning and tried something else..and it worked...so far anyway.
So far I figured it out...
Since the normal process to do this doesn't work for me ..and apparently many others..here is the solution for those of you having similar issues.
In PremPro select the desired clip you wish to place effects on
Rename it and save
R click and "Replace with AE composition"
Name new file
You will see three files pop up in AE in the project panel.
The original source clip .. in my case.. shows an icon that lets me know it isn't the true file.
Highlight this file with a click and then go Ctrl H (for PCs)
The group of computer source clips you use for your project will come up.. double click on the original clip you had imported into your PPro project.
The source file icon in AE will change to an icon that denotes the true file...save
Go to your still open Ppro project and make sure it carried the effects over..save.
Now you can save and close the AE project.
So for this works for me today and I hope this helps anyone else dealing with a similar issue.
Thanks.

Do I need to set something when using Dynamic VIs to pass control values to an executable VI

Similar Messages

Maybe you are looking for