Do I need to setup proxy to connect to 9iAS

Hi All,
I have installed WIN 2000 server, Oracle 9i DB, Application server and 9iDS in one m/c. the database and App server wokrs fine. I can connect to database through Forms 9i and when I run the form it ask me to connect to the network and when I cancel the dialog box it ask me work offline or connect. I have no network.
If I want the form or WMS to work I need to setup proxi server if so does any body knows how to do that.
Thanks.

1. i would restore the express to factory defaut by holding the reset button on the unit with a paperclip while you are powering it on
2. if it restored, you should be able to see it in your wifi icon at top of screen as "airport express"
or you can see it in airport utility
3. then if you want to connect it wirelessly to your time capsule, you would choose "extend network" and put in relevant security and password....this would make the express a wireless access point, fed by your time capsule(main router)
if you chose to do it wired which is a better way if you have access to ethernet port at wall, you would choose "create a wireless network" and then under the "network" tab you would choose "Bridge Mode".....this would make the express a wired access point, fed by your time capsule(main router)

Similar Messages

  • Mac RDP Client (v8.0.10 on 10.10.1): HTTPEndPointException: 4, The non-proxy http connection failed to connect with the message: 404 Not Found

    My office is setting up a new gateway server.  I can connect to the old one just fine, but the new one is not allowing me to connect.  I can connect from my Windows VM, but not my Mac Client.  
    This is the log:
    2014-Nov-26 16:09:10] RDP (0): Final rdp configuration used: gatewayhostname:s:gat1.gibbscam.com
    screen mode id:i:0
    use multimon:i:0
    session bpp:i:24
    full address:s:dev-JeremyS2.gibbs.local
    audiomode:i:2
    username:s:Gibbs\JeremyS
    disable wallpaper:i:0
    disable full window drag:i:0
    disable menu anims:i:0
    disable themes:i:0
    alternate shell:s:
    shell working directory:s:
    authentication level:i:2
    connect to console:i:0
    gatewayusagemethod:i:1
    disable cursor setting:i:0
    allow font smoothing:i:1
    allow desktop com"font-family:Helvetica;line-height:normal;" />redirectprinters:i:0
    bookmarktype:i:3
    use redirection server name:i:0
    [2014-Nov-26 16:09:10] RDP (0): --- BEGIN INTERFACE LIST ---
    [2014-Nov-26 16:09:10] RDP (0): lo0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
    [2014-Nov-26 16:09:10] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
    [2014-Nov-26 16:09:10] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:10] RDP (0): gif0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): stf0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): en0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): en1 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:10] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
    [2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:65fb:7056:64eb:4363 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:10] RDP (0): fw0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): en2 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): p2p0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): bridge0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): utun0 af=18  addr= netmask=
    [2014-Nov-26 16:09:10] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:10] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:10] RDP (0): --- END INTERFACE LIST ---
    [2014-Nov-26 16:09:10] RDP (0): correlation id: d8afdeb7-ce3a-ceff-a6e8-51a5d5b40000
    [2014-Nov-26 16:09:10] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    [2014-Nov-26 16:09:15] RDP (0): Exception caught: Exception in file '../../librdpclient/asiosocketendpoint.cpp' at line 521
        User Message : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote
    PC, and then try again.
    [2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
    [2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    [2014-Nov-26 16:09:15] RDP (0): ------ END ACTIVE CONNECTION ------
    [2014-Nov-26 16:09:15] RDP (0): --- BEGIN INTERFACE LIST ---
    [2014-Nov-26 16:09:15] RDP (0): lo0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
    [2014-Nov-26 16:09:15] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
    [2014-Nov-26 16:09:15] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:15] RDP (0): gif0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): stf0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): en0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): en1 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:15] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
    [2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:65fb:7056:64eb:4363 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:15] RDP (0): fw0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): en2 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): p2p0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): bridge0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): utun0 af=18  addr= netmask=
    [2014-Nov-26 16:09:15] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:15] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 16:09:15] RDP (0): --- END INTERFACE LIST ---
    [2014-Nov-26 16:09:15] RDP (0): correlation id: 3d81bcf6-8d0e-fba8-b75e-bd2a247c0000
    [2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    [2014-Nov-26 16:09:15] RDP (0): Resolved 'gat1.gibbscam.com' to '12.167.61.34' using NameResolveMethod_DNS(1)
    [2014-Nov-26 16:09:15] RDP (0): Resolved 'gat1.gibbscam.com' to '12.167.61.34' using NameResolveMethod_DNS(1)
    [2014-Nov-26 16:09:15] RDP (0): Exception caught: Exception in file '../../librdp/private/httpendpoint.cpp' at line 305
        User Message : HTTPEndpointException: 4, The non-proxy http connection failed to connect with the message: 404 Not
    Found
    [2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
    [2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    [2014-Nov-26 16:09:16] RDP (0): ------ END ACTIVE CONNECTION ------
    And here's a log for server that I can connect to:
    [2014-Nov-26 15:52:20] RDP (0): Final rdp configuration used: gatewayhostname:s:gato.gibbscam.com
    screen mode id:i:0
    use multimon:i:1
    session bpp:i:24
    full address:s:dev-JeremyS2.gibbs.local
    audiomode:i:2
    username:s:Gibbs\JeremyS
    disable wallpaper:i:0
    disable full window drag:i:0
    disable menu anims:i:0
    disable themes:i:0
    alternate shell:s:
    shell working directory:s:
    authentication level:i:2
    connect to console:i:0
    gatewayusagemethod:i:1
    disable cursor setting:i:0
    allow font smoothing:i:1
    allow desktop com"font-family:Helvetica;line-height:normal;" />redirectprinters:i:0
    bookmarktype:i:3
    use redirection server name:i:0
    [2014-Nov-26 15:52:20] RDP (0): --- BEGIN INTERFACE LIST ---
    [2014-Nov-26 15:52:20] RDP (0): lo0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
    [2014-Nov-26 15:52:20] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
    [2014-Nov-26 15:52:20] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:20] RDP (0): gif0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): stf0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): en0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): en1 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:d111:af1b:b193:8d4e netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:20] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
    [2014-Nov-26 15:52:20] RDP (0): fw0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): en2 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): p2p0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): bridge0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): utun0 af=18  addr= netmask=
    [2014-Nov-26 15:52:20] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:20] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:20] RDP (0): --- END INTERFACE LIST ---
    [2014-Nov-26 15:52:20] RDP (0): correlation id: 3bea4411-4b23-c197-9b52-63f948a10000
    [2014-Nov-26 15:52:20] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    [2014-Nov-26 15:52:25] RDP (0): Exception caught: Exception in file '../../librdpclient/asiosocketendpoint.cpp' at line 521
        User Message : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote
    PC, and then try again.
    [2014-Nov-26 15:52:25] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
    [2014-Nov-26 15:52:25] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    [2014-Nov-26 15:52:25] RDP (0): ------ END ACTIVE CONNECTION ------
    [2014-Nov-26 15:52:25] RDP (0): --- BEGIN INTERFACE LIST ---
    [2014-Nov-26 15:52:25] RDP (0): lo0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
    [2014-Nov-26 15:52:25] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
    [2014-Nov-26 15:52:25] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:25] RDP (0): gif0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): stf0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): en0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): en1 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:d111:af1b:b193:8d4e netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:25] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
    [2014-Nov-26 15:52:25] RDP (0): fw0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): en2 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): p2p0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): bridge0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): utun0 af=18  addr= netmask=
    [2014-Nov-26 15:52:25] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:25] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
    [2014-Nov-26 15:52:25] RDP (0): --- END INTERFACE LIST ---
    [2014-Nov-26 15:52:26] RDP (0): correlation id: 509122b5-d9b1-60f0-a0ac-b75a8dc20000
    [2014-Nov-26 15:52:26] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
    [2014-Nov-26 15:52:26] RDP (0): Resolved 'gato.gibbscam.com' to '12.167.61.35' using NameResolveMethod_DNS(1)
    [2014-Nov-26 15:52:26] RDP (0): Resolved 'gato.gibbscam.com' to '12.167.61.35' using NameResolveMethod_DNS(1)
    [2014-Nov-26 15:52:26] RDP (0): Protocol state changed to: ProtocolNegotiatingCredentials(2)
    [2014-Nov-26 15:52:27] RDP (0): Protocol state changed to: ProtocolConnectingRDP(3)
    [2014-Nov-26 15:52:27] RDP (0): Protocol state changed to: ProtocolInactive(4)
    [2014-Nov-26 15:52:28] RDP (0): Server supports RAIL
    [2014-Nov-26 15:52:28] RDP (0): Protocol state changed to: ProtocolActive(5)
    [2014-Nov-26 15:52:29] RDP (0): Server hides cursor
    [2014-Nov-26 15:52:31] RDP (0): Server shows cursor
    [2014-Nov-26 15:52:35] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
    [2014-Nov-26 15:52:35] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
    [2014-Nov-26 15:52:35] RDP (0): ------ END ACTIVE CONNECTION ------
    Any suggestions on what I can ask my IT department to change on the server so I can connect would be greatly appreciated. 

    Hi Jeremy,
    Thank you for posting in Windows Server Forum.
    From the error and other description it seems that there is some misconfiguration with setup. You need to provide the FQDN name of the server as might server name is not resolving its name properly and so facing issue. As seems from below details:
    [2014-Nov-26 15:52:20] RDP (0): Final rdp configuration used:gatewayhostname:s:gato.gibbscam.com
    screen mode id:i:0
    use multimon:i:1
    session bpp:i:24
    full address:s:dev-JeremyS2.gibbs.local
    Configuration used and full address name both appears different so please verify configuration accordingly.
    Please check the DNS record, check certificate whether it match FQDN name of the server with certificate name, also try to check to connect with IP address and see what result you can find.
    You can follow below guide to configure RD Gateway and after that verify the result.
    1. Deploying Remote Desktop Gateway RDS 2012
    2. How To Work with RD Gateway in Windows Server 2012
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support

  • Can iPhone use SOCKS (not HTTP) proxy to connect to internet?

    Does anyone know if there is a way for an iPhone to connect to a SOCKS proxy (such as one run off of another computer)? In my dorm rooms we are not allowed to install wireless routers, but we can use our laptops to "share" our internet connection wirelessly. The iPhone supports HTTP proxies (easy enough to set up on computer) but then can only get data over port 80 (e.g. no email). SOCKS proxies allow data sent over all ports to be routed through another computer.
    If there is no way to do this, apple should consider putting it into the next update. It is in the current version of OSX and is very easy to set up.

    Hello,
    We installed BOE4 on the server, it runs perfectly, no issues.
    Install Crystal Reports for Enterprise on a laptop. It's the latest one as I checked to see if there's any later versions or patches.
    I am able to log into the BOE Enterprise system as administrator.
    Namely I have setup the Server connections per the following:
    Server Name:   <IP address>
    The check box for SSL is unchecked.
    Server Port Number:   nnnn
    Server Context:  /dswsbobje
    System display name:   <my server> External Connection
    User Name : Administrator
    It connects successfully.
    I then go and create a report against a Universe that I can see listed on my BOE 4 server.
    It then comes up with this error message:
    "Unable to Logon: There is a problem logging on to SAP BusinessObjects Enterprise.
    Please check your logon credentials and make sure your nework is properly configured before trying again.
    If problems persist please contact your Administrator."
    Architecture: 
    BOE 4 sits on Windows 2008 Server SP2
    Laptops tried it on are Windows Vista and Windows 2003 Std.
    Thanks for looking into this for me.
    Edited by: Symonds Janetta on Oct 11, 2011 12:05 AM

  • How to setup proxy for Apple TV if I cannot get a micro USB cable for Configurator app? thanks.

    as titled

    the micro usb cable is a pretty common one all smart phones but apples use them for charging and connecting to computers most supermarket have them
    that being said if it can be used to setup proxy on appetvs it's news to me only believed it could restore failed firmware on appletv's

  • Proxy https connection with client certificate credentials

    Hello, we are building a application like netvibes/iGoogle which allows users to have portlets with rss feeds in them. The portlets are all loaded using ajax and therefore, the RSS feeds must exist on the same domain as the portal. If they don't, you run into problems with cross-domain security issues with ajax. Usually to get around this you just proxy the connection on the server which is very simple with rss feeds that are exposed via http. We however have many feeds that are exposed via https. These feeds likely require a client certificate to authenticate them. Therefore, just doing a basic proxy (take the distant url and open a new connection on the server) won't work because it will build the new connection with the servers credentials and not the users.
    Is there a way to build the connection on the server using the users credentials?? How can we proxy this connection over https?
    If anyone has ideas, please let me know.
    Thanks!

    in fact you are more using a reverse-proxy than a proxy since it is on the server part..
    You have to put all the SSL server part on the reserve-proxy itself and not on the final RSS feed. Then, the reverse-proxy will authenticate your client and gets its certificate. After that, either this proxy will open a plain connection (no ssl) towards the RSS, or you can also open a ssl connection but this means you must create a client certificate for the proxy. It just depends on the security level you need, and I used this solution many times in professional hosting.
    hope it helps !

  • How to setup calendar email connectivity

    How do i setup the email connectivity of a  collaboration room calendar without using a microsoft exchange server. Can i  just use java mail server?

    You can configurate the email connectivity under configuration -> collaboration ->
    transports -> mail transport. This mail transport uses the java mail library. You
    need to provide the host name of your mail server. But keep in mind that by doing it you won't have calendar connectivity. You will have only mail connectivity to send mails from KM folders and mails for collaboration tasks for example.
    Regards,
    Marc

  • Proxy user connection in oracle form10g

    Dear All,
    Any one could help me out how to use proxy user connection in oracle form10g ?
    proxyapp[SCOTT]/proxyapp@orcl which is running fine is database side i like to use this user in oracle forms 10g and would like to know the syntax of connection .
    Thanks & Regards
    zeeshan

    Do you know if there is there anyway to use proxy users without using OAM? It is working fine for us assuming the combined prox_user[real_user] does exceed 30 characters .... Need to expand the forms user id field ...???

  • LDAP Servers not listed when trying to setup new LDAP connection

    Using SQL Developer: 1.5.1
    Oracle Database 10g Enterprise Edition Release 10.2.0.2.0
    Windows XP client environment
    Can anyone clarify how to setup LDAP connections in SQL Developer. We use LDAP for our connections with all the other Oracle tools like SQL*Plus and other developer tools like forms. LDAP is working fine for all of those tools. However, when I try to setup an LDAP connection for SQL*Developer no servers are found for the drop down box. Do we need to put the sqlnet.ora and ldap.ora files somehwere so that SQL Developer can find them? Does SQL Developer even need them? How does the LDAP server get populated in SQL Developer? Thanks. I have tried looking at other posts on this issue and nothing really jumped out at how to do this. I do have some older version Oracle homes setup also. For example we have a Oracle 6i home setup on our machines for the old versions of forms and reports.

    I set it to C:\Oracle10g_DevSuiteHome_1\NETWORK\ADMIN. This is under one of my Oracle Homes on this machine that contains the sqlnet.ora and the LDAP.ora files. This didn't appear to make any difference. Still no LDAP servers listed when you try to add or build a new connection. I tried some of my other Oracle Homes and still no effect. I have also tried copying the sqlnet.or and the ldap.ora files to other directories. I have switched my default Oracle Home to point to the 9i and above homes and this made no difference.
    I have never had to do anything with an environment variable called TNS_ADMIN before. I almost remember a variable called TNS_ADMIN years ago in the registery that had to be modified and it was TNS_ADMIN if I remember correclty. When you said to set an environment variable you did mean to just set or create a new environment variable using the My Computer > Properties > Advanced Tab > Environment Variables on the client machine. I just want to make sure I set the right variable. Thanks for you help and suggestons.
    By the way I can connect just fine using basic or advanced connections. I just would like to use LDAP so I don't have to maintain connections when port, server or SID change. For example we just failed over and the fail over database is on a different server. We do this as a test or when needed for failover purposes. If you are using the basic and advanced connections you need to go in a update connection information. If we use LDAP this is all maintained by the DBAs and individual clients shouldn't have to maintain any connection information as long as the have the right SID. The documentation for SQL Developer doesn't really seem to address how to setup LDAP connections it just mentions that you can do it and it sounds simple.

  • I need to know how to connect my macbook to the tv

    I ordered the mini dvi adapter for my macbook 13in and obviously it connects to the computer but i have no idea how it connects to the tv. Where does it go? and do i need something else to help connect it to the tv? I am really confused please help.

    Yep, Apple makes adaptors to go from the mini DVI on the macbook to almost any type of input that you TV will have. First check the back of your tube to find out what kind of input it has, and order the appropriate adaptor.
    Luck
    E

  • Is there a way to force which wifi network and proxy clients connect to from WGM?

    is there a way to force which wifi network and proxy clients connect to from WGM?

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
     Cheers, Tom

  • What are the mandatory fields needed to setup/register the SIP phone manually in CUCM

    What are the mandatory fields needed to setup/register the SIP phone manually.Also, if someone can let me know the mandatory fields for Cisco based SIP phone and also the third party SIP hard phones like Avaya or any other Third party SIP phones both Soft phone and physical phone requirements...in CUCM
    Please suggest...I need to know if MAC address is mandatory for all Cisco SIP phone to setup 

    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/7_1_2/ccmcfg/bccm-712-cm/b09sip3p.html
    http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-communications-manager-version-70/112110-phone-add-00.html

  • I need to setup 7800 Series IP Phones in the CUCM 8.6.2 which by default are not support but will work after install the software. Anyone have document from Cisco as I remember I seen once before.

    I need to setup 7800 Series IP Phones in the CUCM 8.6.2 which by default are not support but will work after install the software. Anyone have document from Cisco as I remember I seen once before.

    Hi Ali,
    I'll just add this reference to the good tips from my friend Manish (+5)
    Support for the 7800 series in CUCM 8.6.2 was first added with this
    Device Pack;
    Cisco Unified Communications Manager
    Device Package 8.6(2)(24104-1)Release Notes
    Cisco Unified Communications Manager Device Package Release 8.6(2)
    adds support for the Cisco IP Phones
    7821, 7841, and 7861 running SIP firmware release 10.1(1).
    The steps are in this doc
    http://www.cisco.com/web/software/282074299/107528/cmterm-devicepack-8.6.2.24104-1_Readme.pdf
    You might as well install the latest 8.6.2 Device pack
    cmterm-devicepack8.6.2.24112-1.cop.sgn
    Cheers!
    Rob
    "Seek it out and ye shall find  " 
    - OneRepublic

  • My IPhone 3GS is unlocked and i went to update the software and it said that an unknown error has occurred and said it needed to be restored to connect with Itunes. When i got to restore it, it gets about 3/4 of the way done, says an unknown error(1015)

    Hey guys. My IPhone 3GS is unlocked and i went to update the software and it said that an unknown error has occurred and said it needed to be restored to connect with Itunes. When i got to restore it, it gets about 3/4 of the way done, says an unknown error has occured(1015). I have no clue what to do and all and any help would be amazing.

    See Here
    https://discussions.apple.com/message/15290457#15290457
    From the More Like This  on the right...

  • My laptop was stolen and I need to be able to connect my iPhone4 to the new laptop and transfer content (photos, mp3's, apps etc.) to the new laptop.  I'm afraid to try a sync in case it deletes all the content off the iPhone.  Any suggestions?

    My laptop was stolen and I need to be able to connect my iPhone4 to the new laptop and transfer content (photos, mp3's, apps etc.) to the new laptop.  I'm afraid to try a sync in case it deletes all the content off the iPhone.  Any suggestions?

    You should be importing all pics taken with the iphone to your computer regularly as you would with any digital camera.
    iOS: Importing personal photos and videos from iOS devices to your computer

  • My Ipod touch says disabled connect to itunes I try and it says cannot connect it has a passcode that needs to be entered to connect but thats why I have to get into itunes because I can't get in my Ipod what do I do?

    My Ipod touch says disabled connect to itunes I try and it says cannot connect it has a passcode that needs to be entered to connect but thats why I have to get into itunes because I can't get in my Ipod what do I do?

    Place the iPod in Recovery mode and then connect to your computer and restore via iTunes.

Maybe you are looking for

  • BPC 10.0 NW: JOURNAL ENTRIES ARE REVERSED WHEN RUNNING CONSOLIDATION

    Hi Expert, After running consolidation, I made various journal entries. After posting the journal entries, status of consolidation and currency translation in consolidation model was changed from "done" to "to be executed". When I re-run the consolid

  • Displaying navigation item in Navigation Pane

    1. I created a Portal in my 11.1.1.8 Portal Builder. 2. For that portal, I added a few links to navigation. Portal Home -> Portals -> Portal Builder -> "Administer" corresponding to my portal -> Assets-> Navigation -> Edit on the default navigation 3

  • Reports Printing Slow

    Hi, I have a Forms5.0 and Reports3.0 and Developer/2000 Reports server3.0 in a Client-Server Articture. My Question is: when I print a report(1 page), the reports server taking too much time to print and it is sitting for the long time9 sometime 12 h

  • Date should not be  less than current date.

    Hello, I have a form.It has an item called end_date. I want to have validation of end_date in such a way that "end_date should not less than current date". Any tips would be helpful. Thanks in advance.

  • Trying a comprehensive jakarta-commons PKGBUILD....

    Hey there! I would like to build a PKGBUILD for a nice java banking program. On the way to a Arch-conform PKGBUILD I stumbled over the Java Package Guidelines and investigated the libs which are shipped with the program a bit further. There I found t