Do I need to Start Journal after Stream process restarting

I have a CDC process using JKM with "Oracle Streams Consistent set" in place. Do I need to start the Journal once the Database is back up after a shutdown and the stream process is restarted?

You may not need to do that. Please refer to support note "What Is The Basic Setup Of The Changed Data Capture (Journalization) Feature In ODI (Doc ID 793424.1)"

Similar Messages

Hp-toolbox, need to "start printer" after each reboot

Hi,
I got a HP C4580 Wi-Fi printer. Everytime I boot I need to run hp-toolbox and go to Printer Control -> Start Printer. Can this be automated at boot? I also added myself to the group lp, but hp-toolbox still wants the root password for it to work.
Thanks!

Wilco wrote:I don't use sudo
so you always login using the root account ????

Can Not start Database after Server is restarted !!!!

I am building a oracle Hyperion Essbase and planning sandbox on my laptop using VMware 9.0
and 11gr2 as ny database.
Once I complete the install and config, I am installing the essbase EAS client, once that is completed I have too restart the server
once the Server is back up, the database is giving me the following Error:
Database Instance: Hyperion
Enterprise Manager is not able to connect to the database instance. The state of the components are listed below. Page Refreshed Aug 31, 2013 2:19:45 AM EDT
Database Instance
Host localhost
Port 1521
SID Hyperion
Oracle Home C:\app\Administrator\product\11.2.0\dbhome_1
Listener
Status Down
Host localhost
Port 1521
Name LISTENER
Oracle Home C:\app\Administrator\product\11.2.0\dbhome_1
Location C:\app\Administrator\product\11.2.0\dbhome_1\network\admin
Details TNS-12541: TNS:no listener
Agent Connection to Instance
Status Failed
Details ORA-12541: TNS:no listener (DBD ERROR: OCIServerAttach
Change Status Details
Copyright (c) 1982, 2010, Oracle. All rights reserved.
SQL> Connected to an idle instance.
SQL> SQL> ORA-00119: invalid specification for system parameter LOCAL_LISTENER
ORA-00132: syntax error or unresolved network name 'LISTENER_HYPERION'
Disconnected
Database Instance: Hyperion
Error Message
The operation for starting up the database has failed. Click 'View Details' to see the error. You may have to perform a recovery.
View Details
Perform Recovery
Enterprise Manager is not able to connect to the database instance. The state of the components are listed below. Page Refreshed Aug 31, 2013 6:56:37 AM EDT
Please advise

Not clear what you are asking instruction i am following
again I need a Database schema for Oracle Hyperion Shared Services
I set up the database and config the Hyperion Essbase application
but when I restart the server the database gives me the above error
Listener / Status Down / Host localhost
and
Agent Connection to Instance Status Failed
Details ORA-12541: TNS:no listener (DBD ERROR: OCIServerAttach
I manually went into the database instance and started the Listener
but I can not start the database
it is saying me to do a recovery ????
Details
SQL> Connected to an idle instance.
SQL> SQL> ORA-00119: invalid specification for system parameter LOCAL_LISTENER
ORA-00132: syntax error or unresolved network name 'LISTENER_HYPERION'
Disconnected
Database Instance: Hyperion
Error Message
The operation for starting up the database has failed. Click 'View Details' to see the error. You may have to perform a recovery.
View Details
Perform Recovery
what can I do Please advise

Starting oracle after a system restart:

Hi,
I restarted my solaris 10 and want to restart my oracle database server.
I have to oracle instances: cms & pcms.
When I do a 'connect / as sysdba' I get a ORA-12162: TNS:net service name is incorrectly specified. But my listener.ora, sqlnet.ora and tnsnames.ora haven't changed since the last time and look ok (see down).
I can tnsping only cms (not pcms).
What can be wrong?
-bash-3.00$ lsnrctl status
LSNRCTL for Solaris: Version 10.1.0.3.0 - Production on 02-NOV-2005 16:37:14
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Solaris: Version 10.1.0.3.0 - Production
Start Date 02-NOV-2005 15:53:31
Uptime 0 days 0 hr. 43 min. 42 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/OraHome/network/admin/listener.ora
Listener Log File /u01/app/oracle/OraHome/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=db)(PORT=1521)))
The listener supports no services
The command completed successfully
# tnsnames.ora Network Configuration File: /u01/app/oracle/OraHome/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
CMS.ACAIT.BE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.32.1.22)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = cms)
PCMS.ACAIT.BE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.32.1.22)(PORT = 1522))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = pcms)
# Filename: sqlnet.ora
NAMES.DEFAULT_DOMAIN = acait.be
SQLNET.AUTHENTICATION_SERVICES= (NONE)
NAMES.DIRECTORY_PATH= (TNSNAMES, ONAMES, HOSTNAME)
# tnsnames.ora Network Configuration File: /u01/app/oracle/OraHome/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
CMS.ACAIT.BE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.32.1.22)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = cms)
PCMS.ACAIT.BE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.32.1.22)(PORT = 1522))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = pcms)
)

Thanks,
But I don't see there's something wrong with my listener.ora
I forgot to attach my listener.ora file:
stener.ora Network Configuration File: /export/home/oracle/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_cms =
(SID_LIST =
(SID_DESC =
(SID_NAME = cms)
(ORACLE_HOME = /u01/app/oracle/OraHome)
(PROGRAM = extproc)
cms =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.32.1.22)(PORT = 1521))
SID_LIST_pcms =
(SID_LIST =
(SID_DESC =
(SID_NAME = pcms)
(ORACLE_HOME = /u01/app/oracle/OraHome)
(PROGRAM = extproc)
pcms =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.32.1.22)(PORT = 1522))
)

I updated my ipad from IOS 5 to IOS 8. All games and apps that I downloaded was deleted. What can I do to return them back, even after downloading one of the games He deleded all the steps I went through and I need to start all over again

I updated my ipad 2from IOS 5 to IOS 8. All games and apps that I downloaded was deleted. What can I do to return them back, even after downloading one of the games He deleded all the steps I went through and I need to start all over again

iCloud: Restore or set up your iOS device from iCloud
Or from iTunes http://www.iphonefaq.org/archives/971992

CDC - clock icon does not turn to green from yellow after starting journal

Hi,
I am going through the following steps for my datastore for the CDC concept:
1. created a datastore.
2. Selectively reversed a table into it.
3. difined a simple journalizing mode and JKM oracle simple.
4. Right clicked on the data store , in that change data capture -> subscribe - > SUNOPSIS.
5. Right clicked on the data store , in that change data capture -> Add to CDC.
6. Right clicked on the data store , in that change data capture -> Start Journal.
In the Operator , i donot get any warnings or errors after i start the journal.
I have refreshed my Designer also.
But the clock icon is not turning into green from yellow.
I tried this for other datastores and tables too. Still the clock icon doesnot turn green.
Due to this iam not able to get any journal data.
Please help me with this issue.
Thanks
Divya aggarwal

Dear Sutirtha & Brice,
CDC is working fine for my source table now. Thanks for your help.
But now I am having issue with the Integration flow table.
I have created and interface with the journalized table as my source which is defined in one schema and target table which is defined on other schema.
I have kept staging area different from target.
The KMs which I am using are :
Source table - LKM SQL to Oracle: Source to Staging
Staging table - LKM SQL to Oracle: Staging to Target
Target table - IKM Oracle incremental Update - Common
I am using the default option values for these. Especially the detection strategy in the IKM is "<Default>:Not_Exists.
Now the issue is that my updated record of sorce table is getting inserted into the journal table and also into the work table at target schema side.
But that record is not getting inserted into the flow table , as a result of this that updated record at source is not getting updated in my target table from the flow table.
The package which I am executing is getting executed without any errors. Please guide me for the flow table issues.
Thanks & Regards,
Divya Aggarwal
Edited by: 784414 on Nov 25, 2010 11:32 PM

I will start a small company. I need Photo Shop and After Effects. How can I buy them on a monthly plan?

I will start a small company. I need Photo Shop and After Effects. How can I buy them on a monthly plan?

http://www.adobe.com/products/catalog.html
https://creative.adobe.com/plans
In the US, Adobe single-app pricing is $20/month and full-suite pricing is $50/month so if you are eventually going to use more than just two apps, it’s more cost effective to buy the entire suite subscription. Do you not also need Premier Pro? Also if you need Photoshop, as you say, there is a PS+Lightroom plan for only $10/month.
So PS+LR for $10/month + AE for $20/month is $30/month unless you need another app, eventually, then you still might as well go with the entire suite.

Problems with starting Windows after Boot Camp was installed on a Win-PC

Hi,
i have a very interesting problem for the MacComunity (haha -.-). The problem is: after I have installed Boot Camp from my Snow Leopard DVD on my Windows PC (not my iMac); I can not start the system. In the Boot Camp System where i can set the system to start with, there was only the Boot Camp System available (not Vista). However, the system installs some Vista-Updates and some Updates from Apple Software Update (iTunes 9.2, Quicktime 7, Safari 5, Airport 5, Boot Camp 3.1) on my PC.
Everything was all right but after I have restarted the System nothing happend. the System freezed when the boot-Screen (Intel Logo) appears. The Systemkeyboard was not detected. It only detects a n external apple Keyboard. There are some reactions when I press the keys, but the Monitory is frozen, anyway. What can I do?

Sounds like a lesson in there: don't wait to put OS X on an external drive that is usually off line.
Rush to a store or on-line and get a UPS of the 1500VA sort (APC RS would be nice, or SMART UPS 1000VA).
The directory of the drives could be corrupt.
I have all my equipment, modem, routers, the works, but we had a bad storm and one port on the router/modem is out (the one I used, the modem seems to be okay) and I am worried that the UPS's line filter for DSL in is also 'compromised.'
Storms and power outages can wRECK or cuase havoc.
It sounds like you need to map out bad sectors maybe (zero all in Disk Utility) perhaps. The directory, volume blocks, or even journal file, got scrambled. However, because no test can find it means - to me - it could be the "non user partitions" rather than OS X partition etc. Hence, zero the drive or just reformat it in full.
Why have you not ever with these outages, just continued to live w/o one? I wouldn't just shutdown, I would unplug if a storm approaches.
PS: SMC Reset button is under drive bay #4. Give it a 5-10 seconds depress.

Detecting Fast start or Hinted Streaming

I have got a task of making H264 files the same way they were made before I took over the job,... however in the Movie information tabs I do not see the the specification of whether it is "hinted streaming" or "fast start" or "fast start compressed". Is there any way of finding out from the old file? I know the videos are suppose to be streaming but I believe that they were only "fast start".
thanks for any information!

No way to tell about fast start except by testing the file from a server as it is a property of the individual file (part of the header info).
You could view this by using a "hex" editor but that would be a pain.
Streaming tracks are extra data and will show in the Movie Properties window. But these tracks are just extra file size and are ignored if your files merely download (not served via streaming server software like RTSP).
So. If your files are viewed in a Web page they only need fast start (Progressive Download). This is done at export (Movie to QuickTime Movie). As long as the file isn't edited after export fast start will remain. If edited and "saved" fast start is removed from the file. To restore fast start simple "Save As".
If you have a bunch of files that need to be fast start you can batch process using AppleScript or Automator.
Save as doesn't do any conversion so it is very fast. It does put your files tracks into a .mov container, however.

Kichat: FAQ 1 - What do I need to start in iChat ? (Replacement)

Original
kichat: FAQ 1 - What do I need to start in iChat ?
Answers to very basic questions of getting started in iChat AV 2.1. (Edit 5/5/05) It mostly goes for iChat 3 as well.
Redrafted 30/03/2007
Glossary
Audio is sound only chats (called Talk on AIM )
Video is Sound and Pictures (where cameras and microphones allow)
account name is synomonous (the same as) with screen name
Basic Facts
iChat AV 2.0 did come with Panther and at this point is free. (Upgrade to 2.1)
iChat 3 comes with Tiger and supports Multiple person chats
You can chat to AIM based services as long as one of you has a camera. (Currently audio only chats are not possible). Windows users have to running one of the XP incarnations and AIM 5.5 at least to Video.
What you Need
OS 10.3.x for iChat AV 2.1
iChat ver 2.0 or 2.1 (Now Panther only)
OS 10.4.x for iChat 3.x
DV input device (camera or DV converter for analogue cameras) See also Exceptions further down.
Free Firewire port (not daisy chained)
An AIM (AOL & Netscape count) or @mac.com account/screen name. (Stick to passwords of 16 characters or less without Special Characters).
How to make Exceptions Work
Slow Mac or USB cam prior 10.4.9 or non USB Video class cam
1) Slow (G3/500 and less) computers and those with USB cams need this utility
iChatUSBCam which enables slower machines to connect and enables USB cameras to be seen by iChat. (lower limit 350Mghz)
2) Analogue cameras can be made to work with a converter like this one.
Hollywood Dazzle DV_Bridge<(not home page of Manufacturer but has pics).
<blockquote style="width: 80%; margin: auto; padding: 5px; border: 1px solid #000; background: #efefef;">10.4.9 now allows for USB cams of the USB Video Class (UVC). Other will still need the iChatUSBCam utility
If your Exception seems to be Networking or Router based read this FAQ
Essential Reading
Although you don't need an understanding of Firewalls or Network Translation on Routers some backgound reading can help.
This link Apple Doc number 93208 can help with basic settings in the Mac's Firewall and the Router's settings.
Note 1 should read:
1. All iChat AV traffic is UDP except for ports 5190 and 5298, which need to be open for both TCP and UDP; and 5220, 5222, which need to be open for TCP only.
The page contains a link to a list of Routers that will work "Out-of-the-Box".
If your's does not appear, pay attention to Note 4, near the bottom, because you are going to have to search for more info about your router (or do that un-Mac thing and read the manual).
I found this ADSL GUIDE site useful for getting extra info by users of routers on DSL.
This site has an Apple Related Area in the Technical section which I have linked you to. It is searchable.
PortForward.com Has pics and instructions for many modems and routers for the Port Forward method of opening ports.
How to Start
After getting your account name, start iChat.
It will lead you through a assistant. Ryan's Pics and instructions on this bit
If you launched it before and are starting again make sure iChat is off line.
Go to Preferences in the iChat Menu item. Open the Acounts icon.
Select the type of account it is.
Type in your name (without the @mac .com suffix) and use tab key to enter password.
Server Options button (Server Settings tab in iChat 3.x) should be live at this point. Check that it reads login.oscar.aol.com and the port is 5190.
Close Server Options and hit enter.
iChat should now log on.
In iChat 3.x there is a check box in the accounts Information tab that says "Use this Account" to be checked to activate it.
Buddies
You now have to enter Buddies into the Buddies list
Use the "+" button at the bottom of the Buddy list window.
Add New Person or from your address book if you have recorded Buddies account names there.
The first account names you should add are the test accounts shown In Contact Testers or the FAQ here.
2:59 PM Friday; March 30, 2007

Original
kichat: FAQ 1 - What do I need to start in iChat ?
Answers to very basic questions of getting started in iChat AV 2.1. (Edit 5/5/05) It mostly goes for iChat 3 as well.
Redrafted 30/03/2007
Glossary
Audio is sound only chats (called Talk on AIM )
Video is Sound and Pictures (where cameras and microphones allow)
account name is synomonous (the same as) with screen name
Basic Facts
iChat AV 2.0 did come with Panther and at this point is free. (Upgrade to 2.1)
iChat 3 comes with Tiger and supports Multiple person chats
You can chat to AIM based services as long as one of you has a camera. (Currently audio only chats are not possible). Windows users have to running one of the XP incarnations and AIM 5.5 at least to Video.
What you Need
OS 10.3.x for iChat AV 2.1
iChat ver 2.0 or 2.1 (Now Panther only)
OS 10.4.x for iChat 3.x
DV input device (camera or DV converter for analogue cameras) See also Exceptions further down.
Free Firewire port (not daisy chained)
An AIM (AOL & Netscape count) or @mac.com account/screen name. (Stick to passwords of 16 characters or less without Special Characters).
How to make Exceptions Work
Slow Mac or USB cam prior 10.4.9 or non USB Video class cam
1) Slow (G3/500 and less) computers and those with USB cams need this utility
iChatUSBCam which enables slower machines to connect and enables USB cameras to be seen by iChat. (lower limit 350Mghz)
2) Analogue cameras can be made to work with a converter like this one.
Hollywood Dazzle DV_Bridge<(not home page of Manufacturer but has pics).<br>
10.4.9 now allows for USB cams of the USB Video Class (UVC). Other will still need the iChatUSBCam utility
If your Exception seems to be Networking or Router based read this FAQ
Essential Reading
Although you don't need an understanding of Firewalls or Network Translation on Routers some backgound reading can help.
This link Apple Doc number 93208 can help with basic settings in the Mac's Firewall and the Router's settings.
Note 1 should read:
1. All iChat AV traffic is UDP except for ports 5190 and 5298, which need to be open for both TCP and UDP; and 5220, 5222, which need to be open for TCP only.
The page contains a link to a list of Routers that will work "Out-of-the-Box".
If your's does not appear, pay attention to Note 4, near the bottom, because you are going to have to search for more info about your router (or do that un-Mac thing and read the manual).
I found this ADSL GUIDE site useful for getting extra info by users of routers on DSL.
This site has an Apple Related Area in the Technical section which I have linked you to. It is searchable.
PortForward.com Has pics and instructions for many modems and routers for the Port Forward method of opening ports.
How to Start
After getting your account name, start iChat.
It will lead you through a assistant. Ryan's Pics and instructions on this bit
If you launched it before and are starting again make sure iChat is off line.
Go to Preferences in the iChat Menu item. Open the Acounts icon.
Select the type of account it is.
Type in your name (without the @mac .com suffix) and use tab key to enter password.
Server Options button (Server Settings tab in iChat 3.x) should be live at this point. Check that it reads login.oscar.aol.com and the port is 5190.
Close Server Options and hit enter.
iChat should now log on.
In iChat 3.x there is a check box in the accounts Information tab that says "Use this Account" to be checked to activate it.
Buddies
You now have to enter Buddies into the Buddies list
Use the "+" button at the bottom of the Buddy list window.
Add New Person or from your address book if you have recorded Buddies account names there.
The first account names you should add are the test accounts shown In Contact Testers or the FAQ here.
9:10 PM Wednesday; April 4, 2007

Error message when starting OC4J after deploying

Hi, I hope someone can help me. I've been developing a J2EE project in JBuilder9 and OC4J 9.0.3. The problem occurs when starting OC4J after the application has been deployed. I'm using two MDBs and two Session Beans, one Stateless and the other one stateful. I'm using two topics with OJMS. I can access these topics from a standalone application, but when I try to lookup JNDI names from inside EJBs, I get a NamingException (name not found) Please I need some help
OC4J error:
D:\oc4j\j2ee\home>java -jar oc4j.jar
Node started with id=678845146
Error deploying file:/D:/oc4j/j2ee/home/applications/LogicaNegocio/LogicaNegocio
.jar homes: Topic has empty subscription name
Oracle9iAS (9.0.3.0.0) Containers for J2EE initialized
Error when executing standalone application client using EJBs:
javax.naming.NameNotFoundException: No resource named 'TopicConnecionFactories/TablaTopics' found in resource provider 'BeanProcesamientoMensajes'
This error doesn't appear when looking up that topic with a standalone application w/o using EJBs
Thanks in advance.

make sure the datasource.xml in the config directory is right
for example
     <data-source
          class="com.evermind.sql.OrionCMTDataSource"
          name="OracleDS"
          location="jdbc/OracleCoreDS"
          xa-location="jdbc/xa/OracleXADS"
          ejb-location="TopicConnecionFactories/TablaTopics"
          connection-driver="oracle.jdbc.driver.OracleDriver"
          username="xx"
          password="xx"
          url="jdbc:oracle:thin:@172.16.113.2:1521:orcl"
          inactivity-timeout="90"
     />

Tip regarding the "systemd[1]: Failed to start Journal Service" error

Just a tip regarding the well-known
systemd[1]: Failed to start Journal Service
error (which I ran into last weekend) to maybe save one or two among you a couple of hours of your time:
The error is described here https://bbs.archlinux.org/viewtopic.php?id=151012 as well as in several other threads in other language boards / in other forums etc. It is usually (as in the linked thread) 'solved' by reinstalling the system - good old Windows magic, also useful when dealing with systemd.
The Problem with this error is that you do not get into your system. Instead, systemd will print you the mentioned "Failed to start Journal Service" error message a couple of million times. There are also no logs that you could retrieve (when booting from a livesystem) and that would give you any helpful hints, since journal is systemd's logging service, old-style system logs are not kept, and the dmesg log doesn't survive the reboot with default settings.
As pointed out in the above mentioned thread, you will see a few more instructive error messages when adding 'emergency' to the kernel line in the bootloader config.
Now there may be plenty of reasons why the systemd journal service might not work. The most common and most annoying, however, appears to be this one:
In this case you will see that the problem actually lies in
systemd[1]: Cannot open /etc/machine-id: No such file or directory
Now, 'man machine-id' reveals that "the /etc/machine-id file contains the unique machine id of the local system that is set during installation. (...) The machine ID is usually generated from a random source (...)". It is obviously perfectly justified to refuse to boot the system because an absolutely insignificant random number is missing. As far as systemd is concerned anyway.
Usually, it seems, the /etc/machine-id is set by /usr/bin/systemd-machine-id-setup during installation or system upgrade. It is not documented anywhere that this is a rather important step and that you should better check if this was or was not actually done before rebooting. Obviously (but for no apparent reasons) systemd fails to run this (or to run this successfully) sometimes.
Also to be recommended: Always retain (back up) your old kernel and initramfs and edit your bootloader config appropriately to be able to boot with your old kernel again ... just to have one or two options left to get back into the system in case of running into an unpleasant surprise from the side of systemd or other packages.
The solution is, obviously, to create this file /etc/machine-id ... You probably want to do that from a livesystem (if you want to try it from the emergency shell, you would need to remount / (i.e. root) as rw and hope that systemd will not punish you for that) by just running the program that was designed for creating this file manually: /usr/bin/systemd-machine-id-setup
http://permalink.gmane.org/gmane.comp.s … devel/7528 states that it might also work with merely creating the file 'touch /etc/machine-id'. Though I didn't try that since I had enough fun with systemd for one week and didn't want to break my system again just to see if that works.

Jristz wrote:
ackalker wrote:Sorry for necrobumping this.
Generating the machine-id in a consistent way is very important when working with KVM and containers, where the machine-id can be set for the VM or container. See `man systemd-machine-id-setup`.
Again, _don't_ just put some random UUID in there, especially not in the systemd package install script, this makes provisioning Arch Linux containers a PITA.
If you thing that the way that arch is handlynbg the machine-id is wrong or can be improved, then file a bug.
He already did.
Jristz wrote:Anyway, I thing if reinstalling systemd package or if systemd have a command to reinitialize the machine-id file.
Like so many of your posts, I had to read this a half dozen times before it made any sense. I think you're hinting at the utility that ackalker already pointed out in the post you're replying to. And, if you read the install scriptlet, you wouldn't need to think about whether or not reinstalling would be an option. You would know that it isn't.

I have tried everything, but still I can't locate the photos tab in iTunes...I have tried changing the resolution, started iTunes after connecting with the ipad2, nothing seems to work! please advise!

I have tried everything, but still I can't locate the photos tab in iTunes...I have tried changing the resolution, started iTunes after connecting with the ipad2, nothing seems to work! please advise!
I am also providing you with a screenshot of what appears! I need photos on my iPad2
Message was edited by: angana

You don't see it on the left-hand side of iTunes - you need to connect and select the iPad on the left-hand side, and then one of the tabs on the right-hand side that you use to select which content to sync to the iPad should be Photos : http://support.apple.com/kb/HT4236
You will need to select and sync all the photos that you want on the iPad together in one go as only the most recent sync remains on the iPad, not including photos in a subsequent sync is how you delete them from it.

Power Mac G4 won't start up after shut down

I have a Power Mac G4 (dual 1 GHz with 2 GB of RAM) running OS X 10.4.11. It has the mirror drive doors and was once referred to as the “wind tunnel”.
The problem is that it will not start up after it has been shut down unless I first push the reset button. I have tried replacing the battery and resetting the p-ram. When I try to start it without first pushing the reset button nothing happens. The light for the start button doesn’t even come on. But if I disconnect the power, open it up and push the reset button it will start up and run perfectly.
Thank you for any suggestions that you might have.

Thanks BDAqua, it does sound like a bad capacitor. The PSU is one that I put in a few years back when Apple was giving them out so as to reduce the fan noise. I kept the old one until last week when I sent it off to be recycled. I suppose it would be a tough job to find the bad capacitor and I doubt that I would have the skill to replace it even if I could find it. It's not like I really need this power mac since I have a Mac Pro 1,1 but I do occasionally want to run something in OS 9 and I do love this machine for what ever reason. There was remarkably little dust inside but I went over it with a can of dust remover.
Don

Is there any way to create a time machine backup to an external hard drive with content already on it? I have a hard drive that i have used for pictures but when i try to run a backup it says i need to start from a blank drive. Can i get around it?

Is there any way to create a time machine backup to an external hard drive with content already on it? I have a hard drive that i have used for pictures but when i try to run a backup it says i need to start from a blank drive. Can i get around it?

It would be much better if you had separate drives for the pictures and Time Machine backups.....but, if you want to use the same drive for both purposes, temporarily move the folder with the pictures to another location for safe storage.
Run the Time Machine backup on the hard drive and verify that everything is working correctly. Time Machine will format the disk for you in Mac OS Extended (Journaled) as part of the backup process.
Then move the folder with the pictures back to the hard drive with the Time Machine backups.
When you have tested to make sure that everything is working again, then and only then should you delete the folder with pictures from the temporary storage area.
Again....it would be much better to keep Time Machine backups on a drive just for that purpose, and other data on another drive for that purpose. This is clearly one of those times when the fact that you can do something does not mean to imply that you should do it.

Do I need to Start Journal after Stream process restarting

Similar Messages

Maybe you are looking for