Do i need to switch off the airport express everyday?

i am concern about the airport express life span. does it affected by the fact that I never switch it off since the first time I set it up?

There is far less stress placed on an electronic component...and it will generally last longer.... if it is left on all the time... as compared to constantly powering it down and then powering it back up.
If you are going to be gone for a week or more, it might make sense to power the Express off in that case, to save a bit of electricity.
You may receive some differing opinions about this topic.

Similar Messages

Am using provided AC charger to charge my iPad mini. After a while, I checked the device. The battery is no longer in charge mode. It is only 80% charged. When I touch the AC charger, it is hot. I need to switch off the AC charger to let it cool down bef

I am using 2 unit provided AC charger to charge my iPad mini. After a while, I checked the device. The battery is no longer in charge mode. It is only 80% charged. When I touch the AC charger, it is hot. I need to switch off the AC charger to let it cool down before continue to charge my iPad mini again. Of course it will be 100% charge but must make sure the AC charger is cool down completely.
I feel that the provided AC charger that is not suitable for our charging on iPad mini.

I would book an appointment at an Apple Store, if you have one nearby, to have it looked at.
Genius Bar: Preparing for Your Apple Store Appointment

If I have my iMac internet sharing turned on, the Airport Utility won't recognize the Airport Express I want to use to stream iTunes to my stereo. When I turn the iMac internet sharing off, the Airport Express appears but calls itself a base station.

If I have my iMac internet sharing turned on, the Airport Utility won't recognize the Airport Express I want to use to stream iTunes to my stereo. When I turn the iMac internet sharing off, the Airport Express appears but calls itself a base station. I just bought the Airport Express and it's not clear how I should set up my System Preferences for Sharing. Thx

Yes. Unfortunately the stereo is too far from the wired ethernet connection My iMac is connected to the internet using an ethernet cable from the DSL modem (plugged into the wall, not wireless). The Airport Express is plugged into an outlet 25' away from the iMac and connected to my speakers. I've turned on the iMac Airport wireless Internet Sharing, hoping to stream iTunes to the Express connected to the stereo. The iMac Airport picks up several neighborhood networks so I know it's working (and I connected my iPhone wifi to it just to check as well).
When I use Airport Utility to set up the Express, the only time Utility recognizes the Express is when the iMac Airport is off. When I turn on the iMac Airport, the Airport Utility immediately loses the Express and asks to rescan.
Maybe that explains my problem better.

I want to connect a powered outdoor speaker to an airport express - is that all i need - how close does the airport express have to be to the speaker - how do i connect them?

I want to hook up an outdoor powered speaker to an airport express. How do I do this? Which airport express thingee do I need? I want to plug in the airport express thingee inside and connect to speakers outside. Is there a length limit to the minijack cable I can use to connect the them? Do I need a base station thingee and an airport express. I am only going to use it to stream i tunes music to it. Thanks.

No.

Can I use the Airport Express to connect to a Linksys Wireless Network and then use the Ethernet port on the Airport for a wired connection to a device for internet access? Would I be able to then also use that Ethernet pt to a Ntwk Hub for more wired c

Thanks for the help. Looked but not clear on what I am trying to do as being possible. Can I use an Airport Express to connect wireless to a Linksys Wireless Router, such that I can then use the Ethernet ports on the Airport to either connected to a PC wired, or even use a hub off the Airport Express to allow multiple wired connections to it?
I am not looking to have the Airport Express extend my wireless network, just connect to it and provide me wired connections in a different location from where my Linksys Route is located. Would prefer to replace Linksys with all Apple, but just not possible financially yet. Thanks for the help.

If the AirPort Express Base Station (AX) is an 802.11n model, then yes, you can reconfigure it as a wireless Ethernet bridge. In this configuration, the AX would join the wireless network provided by the Linksys router and its Ethernet port would be enabled for either a single wired device or for an Ethernet hub or switch for multiple devices.

Will I be able to use my printer which is not wireless with the airport express and will it become a wireless printer ?

I have a wired printer and I need to know will the airport express work with this printer and will I be able to print wirelessly from my IPad ?

Can't print from iPad unless it's AirPrint able...
If it isn't you may want to check out Printopia.

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not. I've tried several USB connectors, and several different ports on my USB hub; same result. I need to have the HP connected to the hub 'cause from there it's connected to our desktop Mac.

Hi,
I am currently replying to this as it shows in the iChat Community.
I have asked the Hosts to move it to Snow Leopard (you should not lose contact with it through any email links you get)
I also don't do Wirelss printing so I can't actaully help either.
10:01 PM Friday; July 29, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I have a Cisco wireless router. Can I buy an Airport Express plug in booster for a distant part of my house or do I need an Airport Extreme base station instead to make the Airport Express plug in booster work?

Can I buy an Airport Express plug-in wifi signal booster to connect to a Cisco wireless router, or do I have to buy an Airport Extreme base station to make the Airport Express plug-in work?

You would need either an AirPort Extreme or an AirPort Express connected to the Cisco router, with a permanent Ethernet cable connection.
Configure the Extreme or Express that is connected to the Cisco router to "create a wireless network".
Then, you could add an AirPort Express to "extend a wireless network" to provide more wireless coverage for the network that the Extreme or Express would be creating.
Remember that the Express can only "extend" the quality of signal that it receives, so it must be located where it can receive a strong signal from the "main" AirPort.
If you don't need the Cisco wireless signal, you could turn it off.....or use that network for guests or something similar.
The bottom line here......you always need two Apple routers if you want to extend the network wirelessly.

I have rearranged all icons on the second and third pages to have a just a photo on my home, but if i switch off the iphone when i restarted it all the icons come back in the old position on the home and second page. I have ios5.

I have rearranged all icons on the second and third pages to have a just a photo on my home, but if i switch off the iphone when i restarted it all the icons come back in the old position on the home and second page. I have ios5.

you can suggest it here - http://www.apple.com/feedback/iphone.html
And it is only a problem if you want a blank first screen. Personally, it would drive me nuts always having to swipe over one page to get to my apps - the only time I unlock my iPhone is to use it or run an app, so no, I have no need nor desire to have a first screen with no icons at all.
But, if they'd put it in as an option so people like yourself can also have what they want, that's fine too So send them your feedback (they actually do listen - iOS 5 includes a number of things people have been asking for on these forums, like being able to delete individual entries from the call history, inproved alerts/notifications, being able to opt out of all the location based data they collect,...).

Switching off the workflows...

During actual production cutover, we need a means of switching off team center and other workflow updates that send information out of SAP during conversion runs and switch them back on again after conversion.
We need something that we can use (like a flag or switch) repeatedly for the release
HEY guys anyidea what can be done about this.. .need to this ASAP... going live in a few days....
Thanks in advance
Update :
For example
Now for a vendor create or change workflow.. we neeed to switch on or off the workflow depending on who is running it.. no which is std WF for vendor ?? i know questions are bit random... any help will do at this point
The business object BUS1008 for vendoe shows a stop sign...what exactly does that mean
The business object BUS2020 ACCOUNTS PAYABLE for vendoR is not implemented
The businedd obhect BUS3008 is active but the event is not implemented or released ..
These are all the details that i have... now i am not really sure who told these ppl that a workflow is triggered at all which sends the data to the Team center..
Any ideas ???
Message was edited by:
Abhishek Dhoundiyal
Message was edited by:
Abhishek Dhoundiyal

Hi,
Though I did not understand what you exactly need I can answer some of the questions you have asked below:
A stop sign in a Business Object indicates that the BO is obsolete and there is a newer version that is available. For example in the case of the vendor the newer version in LFA1.
To understand the various phases in a BO development then refer to this link:
http://help.sap.com/saphelp_nw2004s/helpdata/en/c5/e4ab0e453d11d189430000e829fbbd/frameset.htm
Now coming to the main question of switch off the workflow depending on some criteria. I guess this can be acheived through start conditions. Though a proper business scenario is needed to justify why some people are exempted from the workflow process you can do this through start conditions. You will need to maintain a table where you update the table with the users for whom the workflow is not active and at runtime check the "Document created by" user and check it against the table and update an attribute and have the workflow start on the basis of this attribute.
Hope this helps,
Sudhi

Switching off the filter area in Workbook 3.5

Hi guys,
how can I switch off the filter area in the old version of the analyzer workbook 3.5.
This area is always on the left part of the workbook on the top.
In this workbook I need only the table with the result.
Regards
Erwin

Hi Erwin,
As I know you can hide the filter for key figures but there is no way to hide the characteristics filter. The only option is do not include any characteristics in Free characteristics or row area (not a feasible option in many cases) but if you don't want any characteristics data then you can go for this option.
Regards,
Durgesh.

Need to switch off and on my apple tv v2 each time I want to connect my PC under vista

Hello
need to switch off and on my apple tv v2 each timeI I want to connect my PC under vista.
After that, everything is going well...
But it is not the best user experience ;-)
Any idea if this can be fixed ?
My PC is under Vista...
Thanks a lot

I'm having the same problem. It seems to have started after the most recent firmware upgrade. Does anybody know if Apple is looking into this? It's rather irritating to have to reboot the Apple Tv every time I want to use it!

Switch off the automatic update of profit centers on the Balance Sheet acco

Dear all,
In CO I am using only CCA and PCA. But I don't want to have the profit center updated on the balance sheet items.
For example I have it activated for all the automatical BS postings from MM
I need it only for the PL accounts.
How can I switch off the automatic updates of profit centers on the Balance Sheet Account?
Is it enough to deactivate the PCA on the Controlling Area?
Thanks in advance.
Stefka

Hi, remove assignment in 3KEH,3KEI

HT4259 I am trying to connect airport express to extend the range of my airport tower. What type of cords do I need to connect the airport express to a hardwired outlet in the wall of a bedroom?

I am trying to connect my airport express to extend the range of my network to a bedroom that is hard wired for internet. What type of cord/cords do I need to do that?

You can connect the AirPort Express to the wall port in the bedroom for the setup.....but first....if you have not already done so.....it would be a great idea to make sure that the connection in the bedroom is working correctly.
To do that, turn off the wireless on a laptop and connect the laptop directly to the wall port in the bedroom using an Ethernet cable. Make sure that the laptop can get a good Internet connection that way. If it can, this tells you that the cabling is working correctly, so the Express will work well when you connect it up.
If you don't have a laptop with an Ethernet port, then we'll have to assume that the folks that pulled the cables and installed the jacks tested things as part of the installation.
When you are ready to install the Express, you can use an iPhone or iPad if you have one handy for the setup.

TS1398 I can't access to the web pages thro' Wi-Fi, after switching on the wi-fi.But if I switch off the iphone andswitch on the phone then I can get the web pages.Daily I have to repeat this process to access the web pages.help to solve the problem.

I can't access the web pages thro' wi-fi,But if I switch off the phone and thenswitch on the phone again I am able to access the web pages.Daily I have to repeat this process.help to solve this problem.

Does using 192.168.1.1 get you to the web page?
Firmware Update Process
To safely update FW, I recommend doing the following: Download the FW file from the support site first.
Disable the auto update feature on the router.
1. Save router config to file first using IE or FF with all security add-ons disabled.
2. Factory reset the router with all other devices disconnected or turned OFF accept for 1 wired PC.
http://kb.linksys.com/Linksys/ukp.aspx?pid=80&app=vw&vw=1&login=1&json=1&docid=9d2ff02077f645679972a...
3. Reload or Update the FW using IE or FF. Just download the FW file to your local wired LAN PC.
http://kb.linksys.com/Linksys/ukp.aspx?pid=80&app=vw&vw=1&login=1&json=1&docid=0a6881b90224439b92c8d...
4. Factory reset the router and then set up from scratch first using the local log in link and test with out loading the saved config from file. Check to see if any problems are fixed before loading the saved config from file. Sometimes you need to set up from scratch with out loading the saved config file. Just safer that way.
PC Web Browser Configurations
What browser are you using?
If IE 8, 9, 10 or 11, set compatibility mode and test again.
Disable any security browser Add-ons like No Script and Ad-Block or configure them to allow All Pages when connected to the router.
Clear all browser caches.
Be sure to log into the local log-in account on the router first.

Do i need to switch off the airport express everyday?

Similar Messages

Maybe you are looking for