Do I need to unload the GroupWise agents if I am installing WebAccess on its own server?

Hi,
I ma installing GW Web Access into our GW703 tree and the install is prompting me to unload all agents on the machine to which I am installing.
As I am installing onto a separate server, I am assuming I can leave my PO, GWIA and MTA running?
Can someone confirm this before I proceed?
Thanks for your help

Thanks!
>>>
From: Joseph Marton<[email protected]>
To:novell.support.groupwise.7x.web-access
Date: 07/23/2010 9:39 AM
Subject: Re: Do I need to unload the GroupWise agents if I am installing Web Access on its own server?
Jason wrote:
> I ma installing GW Web Access into our GW703 tree and the install is
> prompting me to unload all agents on the machine to which I am
> installing.
>
> As I am installing onto a separate server, I am assuming I can leave
> my PO, GWIA and MTA running?
Yes, the install means to unload all agents running on the server where
you are installing WebAccess. If all your agents are on other servers
you can leave them running.
Novell Knowledge Partner
Enhancement Requests: http://www.novell.com/rms

Similar Messages

Need help migrating from CR9 to CR10. CR10 is now on its own server

Post Author: ca_nimrod
CA Forum: General
I am not sure how to modify my VBScript code that currently uses the CreateObject command -- Session("oApp") = Server.CreateObject("CrystalRuntime.Application.9") -- to call Crystal. How do I change that code to call Crystal when it is no longer installed directly on the WebServer?
Any help on how to get through this, no matter the solution, is most appreciated.
-Colman

I'm not sure how you can sync the emails you've collected via POP to the IMAP account, or whether it's possible but to setup the new IMAP account should be straightforward. Someone else on here will hopefully be able to advise on the syncing possibilities. I would take the precaution of having a backup of your current 'On My Mac' emails before doing the following.
To create the IMAP account in Mail:
Mail>Preferences>Accounts
Click on the '+' to add an account
Select 'Add other mail account'
Enter your credentials including the word IMAP in the 'Full Name' field (to help differentiate it from your existing POP account with the same email address - you can edit the name later if nec)
Once the detail is filled in hold down the Alt (Option) key before you click on Create and it should change to Continue
The next screen then allows you to specify that the account is IMAP. Input the server addresses and it should be clear from there.

If an internal ID is changed for the Work Repository how does it affect objects that are already in it? Will they continue to run or do you need to cycle the ODI agent?

I was having trouble migrating the Master and Work repositories from my QA to my Prod environment. I was getting an error message that the internal id's were alike so I changed the internal id in my Prod Master repository. Then I tried to migrate the Work repository and was getting a similar error. I did a search on the internet for the error message and it recommended that I renumber the Work repository so I did. My concern now is how these changes affect the objects that are already in the repositories? Will those objects continue to run? Also do these changes take affect immediately or do you need to cycle the ODI agent?

Well I cannot completely assure you but so far I have not faced any issues after a renumber. It will affect the exist object only when you have imported the object in synonym_update mode. I believe you have the daily backup of your production repository.
Bhabani
http://dwteam.in

I just received a nano for Christmas. I bought an iwatch wristband but I can't get the face to rotate. Should this happen on its own or do I need to set it manually?

I recently received a nano for Christmas but i cant get the face to rotate. Should this happen on its own or do I need to set it manually?

I guess it helps to read the manual... haha... just figured it out!

Anyone with a hint ref. why my office package wont work after showing this message: "Check with the developer to make sure it works with this version of Mac OS X. You may need to reinstall the application. Be sure to install any available updates"

also, I have to mention I already reinstalled package and nothing works. Help please!

Hi, thanks for getting back. Here is the full content on the window that pops up every time I click on my Word icon: "Microsoft Word cannot be opened because of a problem. Check with the developer to make sure Microsoft Word works with this version of Mac OS X. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OS X. Click Report to see more detailed information and send a report to Apple". I reinstalled the application, and everything else is updated, so I am not sure what to do.

Aperture keeps crashing. "Check with developer to make sure aperture works with version of mac os x you might need to reinstall the application ..be sure to install any updated for aplication and mac os x"

"Check with developer to make sure aperture works with version of mac os x you might need to reinstall the application ..be sure to install any updated for aplication and mac os x"
I updated aperture and os x. Latest versions. I also reinstalled aperture. Still getting the same. please help

Process:
Aperture [448]
Path:
/Applications/Aperture.app/Contents/MacOS/Aperture
Identifier:
com.apple.Aperture
Version:
3.2.2 (3.2.2)
Build Info:
Aperture-201096000000000~2
App Item ID:
408981426
App External ID: 5333832
Code Type:
X86-64 (Native)
Parent Process: launchd [125]
Date/Time:
2012-02-24 23:05:55.982 +0000
OS Version:
Mac OS X 10.7.3 (11D50b)
Report Version: 9
Interval Since Last Report:
18654 sec
Crashes Since Last Report:
20
Per-App Crashes Since Last Report:   20
Anonymous UUID:
244A3A5D-F483-4E17-AFD2-B35CB6B4EBD4
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: /Library/Frameworks/PluginManager.framework/Versions/B/PluginManager
Referenced from: /Applications/Aperture.app/Contents/MacOS/Aperture
Reason: no suitable image found. Did find:
/Library/Frameworks/PluginManager.framework/Versions/B/PluginManager: no matching architecture in universal wrapper
I havnt installed anything for last 10-15 days.
Aperture library located on hd.
12 ram 870GB free space

Have downloaded a .epub file from a third party publisher to my pc. Publisher advises that iTunes is needed to move the file to my iPad. iTunes installed on both pc and iPad. What's next?

Have downloaded a .epub file from a third party publisher to my pc. Publisher advises that iTunes is needed to move the file to my iPad. iTunes installed on both pc and iPad. What's next?

Drag or copy the file into the Automatically Add to iTunes folder in your library (default location C:\Users\user_name\Music\iTunes\iTunes Media), or add it manually using File > Add File to Library ... If the file is compatible with iTunes it'll be added to your library and can then be synced with your iPad.

Need to place the SCOM agents in Maintenance Mode automatically during Patching activity

Hi,
I have a requirement to place the SCOM agent servers in MM automatically during shceduled patching every month. I have gone through few blogs but could not find an apt solution for SCOM 2012 R2 environment.
I think the process should be..
1. Create a management pack to monitor all servers for event 1074 (or/and 22), which gets triggere during the patching
2. Write some powershell to put a machine into maintenance mode.
3. Trigger the powershell script to run when needed.
Any suggestions please?
Thanks

Where doing this in our environment. We have a SCOM monitor looking for Reboot events (ID 1074) where the event contains Shutdown Type: Reboot. the monitor creates an Informational alert which Orchestrator picks up and then sets the machine in MM for 30
minutes. So its any time the machine is intentionally rebooted. You can have it look for CcmExec in the Event description (assuming you're using SCCM) if you only want it to work when being patched.
- Slow is smooth and smooth is fast.

Im on the 3gs and need to get the game center app how can i do this its not in the app store

im really stuck haw can i get the game center app down loaded on my 3gs its not in the app store please help xx

Game Center is installed in the 3GS firmware. You may need to just Update to the current 3GS firmware in iTunes for it to be automatically installed.

Do I need to deactivate the creative cloud in order to install on another pc

Do I need to deactivate adobe creative cloud in order to install it on another PC.

You can activate this software on 2 computers but cannot use the software on both the systems at the same time.
You can activate a product in maximum two computers. Hence, in order to activate a product on third computer, first you need to deactivate the software in the previous computer.

Troubles with the sleeper: how can I avoid it restarting on its own?

When on sleeper, my MacPro early 2008 restarts on its own after a while.
Until very recently, it worked perfectly well.

Thanks for your help.
I wonder if the the troubles I have with the sleeper and with the start button are not linked with an issue on the main disk. Apparently, I need to repair my main drive:
- the number of volume files is not valid
- the numner of volume directories is not valid.
2013-12-15 11:02:20 +0100: Utilitaire de disque a commencé.
2013-12-15 11:04:13 +0100: Vérification du volume « 1 Main HD »
2013-12-15 11:04:13 +0100: Démarrage de l’outil de vérification :
2013-12-15 11:04:15 +0100: Vérification en direct en cours.
2013-12-15 11:05:18 +0100: Vérification du volume HFS Plus journalisé.
2013-12-15 11:05:18 +0100: Vérification du fichier de blocs en excès.
2013-12-15 11:05:18 +0100: Vérification du fichier de catalogue.
2013-12-15 11:05:18 +0100: Vérification des fichiers à liens multiples.
2013-12-15 11:05:18 +0100: Vérification de la hiérarchie du catalogue.
2013-12-15 11:05:18 +0100: Vérification du fichier des attributs étendus.
2013-12-15 11:05:18 +0100: Vérification bitmap du volume.
2013-12-15 11:05:18 +0100: Vérification des informations du volume.
2013-12-15 11:05:18 +0100: Nombre de fichiers de volume non valide
2013-12-15 11:05:19 +0100: (normalement 617151 au lieu de 617152)
2013-12-15 11:05:19 +0100: Nombre de répertoires de volume non valide
2013-12-15 11:05:19 +0100: (normalement 173934 au lieu de 173933)
2013-12-15 11:05:19 +0100: Le volume 1 Main HD s’avère corrompu et doit être réparé.
2013-12-15 11:05:19 +0100: Erreur : Le disque nécessite un réparation. Démarrez votre ordinateur depuis un autre disque (tel que votre disque d’installation Mac OS X), puis ouvrez Utilitaire de disque pour réparer ce disque.2013-12-15 11:05:19 +0100:
2013-12-15 11:05:19 +0100: Utilitaire de disque a cessé de vérifier « 1 Main HD »: Le disque nécessite un réparation. Démarrez votre ordinateur depuis un autre disque (tel que votre disque d’installation Mac OS X), puis ouvrez Utilitaire de disque pour réparer ce disque.
2013-12-15 11:05:19 +0100:

My desktop screen jerks to the right. It also goes to dashboard on its own.

After upgrading to OS X 10.6, my desktop screen jerks to the right. The screen also changes to Mission Control or Dashboard on its own. I am wondering
what I can do to stop this from happening?

ccino1 wrote:
I am using the same mouse I was using before the upgrade, and it worked perfectly before. It almost seems like the mouse might be the problem and yet I am not swipping it.
OS X 10.6.8 and before can be very glitchy with the Apple Magic Mouse. OS X 10.6.8 just makes it very slow and occasionally it will zoom in/out unintendedly but with OS X 10.6 and below it can be more glitchy and cause more problems. I had the same problem with my mouse and I bought a new Logitech M325 actually yesterday. It works great. There's never any glitches, there is navigating with the scroll wheel, and scrolling with the scroll wheel actually feels... good!

I have an iPad 2 running iOS 8. The email app is not working. The screen shows empty email box, then closes on its own. I have tried closing the app, turning ipad on and off and reset to no avail. Any other ideas? Thanks.

I Have an iPad 2 running iOS 8. When I open email, the email isn't there. I have tried closing the app, turning off the ipad and resetting the iPad. None of that helps. Any ideas? Thanks.

So the app is opening to a white screen then closing on its own? If you have deleted your email accounts & the app is still crashing then I would try resetting all settings (without deleting data).
Did you reboot the iPad after removing the email accounts? If not, try that first holding the home & sleep/wake buttons simultaneously until the apple logo appears, then release & once booted back up, try opening the mail app again.
The problem may have started because one of your email messages might have been corrupt or had a corrupt attachment. If you can access it from a computer, sign into your email & see if there are any that can't be opened or produce errors opening. If so, delete the offending emails then try adding the account back to the iPad.

Do I need to remove the older version of firefox before installing a new version? If so, then how much do I remove, and how?

I have an older version of Firefox and adobe on a Sony VAIO. I keep getting pop-ups telling me to upgrade, and also frequent failures when I try to use the browser. I try to upgrade. I go thru the download step, then try the run step and get a message "not allowed". I have checked and I have admin privileges, and I've turned off the firewall security software thinking that it's blocking the install, but nothing works. Does anyone know if the older software is causing this and does it need to be removed before the latest version can go on. Also, if this problem is resolved am I going to have the same problem with Adobe?

What Firefox version is currently installed on the computer?
You can find the full version of the current current Firefox release (37.0.2) in all languages and all operating systems here:
*https://www.mozilla.org/en-US/firefox/all/
If you have a very old Firefox version then you could consider to uninstall that version to clean up existing registry keys (especial the uninstall key).
Make sure NOT to remove "personal data" when you uninstall Firefox, because that will remove all profile folders and you lose personal data like bookmarks and passwords including data in profiles created by other Firefox versions.
Check the Firefox program folder and remove the Firefox program folder if there are still files left in it.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure NOT to remove personal data when you uninstall Firefox as that will remove all Firefox profile folders and you lose your personal data.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Need stats on the number of computers that have installed Adobe Reader

Where can I find how many computers have installed Adobe Reader? I've searched but I can't seem to find an answer. I am trying to convince the PM for a project that we don't need an non-PDF version of a PDF file since Reader is almost universally installed. However, I can't find a solid number to report.

You probably won't get one either. Just wild guesses. This isn't something that Adobe would release as fas as I know.
If you want my wild guess, I'd say 95% of the computers in the US have Reader but again, I have no real information to base that number on.

Do I need to unload the GroupWise agents if I am installing WebAccess on its own server?

Similar Messages

Maybe you are looking for