Do I need to upgrade my OS X 10.6.8 to get Safari v6.1?
I frequent an ETSY website and I have been informed that certain pages will not load because my Safari brouser is out of date. I have an older Mac mini with OS X v10.6.8. I do not know whether I can upgrade my OS X (say to Lion or Mtn Lion) in order to get a current Safari version. Please advise. Thanks, CABJR
You need to upgrade the computer's OS; that Mac mini model can run Yosemite.
(121741)
Similar Messages
-
i can't seem tp sync my old ipod touch to my new laptop. it says i need to upgrade my itunes on the ipod but i get an error. what do i do?
Not good
Error (-1)
Try on another computer
Also see:
iOS: If you can't back up or restore from a backup in iTunes
Then see:
-1 error
-1 error too
If still problem that means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I have an IAMc 4.1 with intel core duo. Upgraded from tiger to snow leopard but cannot get safari to run in 64 bit. Is this because my older IMac won't support 64 bit?
Hi,
the Intel Core Duo processor is a 32-bit only processor and not capable of 64-bit.
Only the Core 2 Duo and later processors are capable of 64-bit.
Sorry
Stefan -
I get messages from gmail, Pandora, and Firefox that my browser is outdated but when I upgrade to version 8.0.1 I still get the messages. No one seems to recognize the upgrade.
Your User Agent shows that you are using Firefox 3.5.3. Reset your User Agent following the instructions below.
*See -->https://support.mozilla.com/en-US/kb/websites%20or%20add-ons%20incorrectly%20report%20incompatible%20browser#w_reset-your-user-agent
*Also see --> http://kb.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default
*Also see --> http://en.wikipedia.org/wiki/User_Agent
NOTE: the information that you submitted with your question shows
*general.useragent.override
**Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.3) Gecko/20090824 '''''<u>Firefox/3.5.3</u>''''' (.NET CLR 3.5.30729)
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.''' -
I use OS X 10.6.8 on my MacBook Pro - do I need to upgrade to avoid the recent SST security flaw? And if so, do I need to upgrade to OS X Mavericks in order to get the recent Version 10.9.2 fix?
There's an article here that addresses that question. You don't need to be running Mavericks for a security update, but you need at least Lion according to this:
http://www.macrumors.com
It's the second article. -
I have a 2005 Jaguar xj8. When I tried to upgrade my 3gs to a 4g two years ago, I got a ticking noise in the speaker and no one on the other end could hear me. I had to go back to a 3gs. My phone is shot and I need to upgrade. Has there been a fix to the problem? Apple told me there was some sort of interference with the airbag system. Jaguar was totally unhelpful.
Hi Labjock,
Welcome to the Support Communities!
The article below may be able to help you with this.
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Cheers,
- Judy -
I have a macbook 4.1 with osx10.6.8 and just added memory (2gig) so I could sync my new IPhone and Ipad. Now I'm told at the apple store that I need to upgrade my operationg system. They said they couldn't help and gave me conflicting advice about what to do. Any ideas? Thanks you!
There are three models of MacBook that comprise the 'macbook 4.1' category, and each of them a little different; however other than 'macbook 4.1' the other thing they have in common is they all are considered Early 2008. Two are white, one black, polycarbonate case, Core2Duo 2.1GHz, 2.4GHz white, 2.4GHz black.
So if you can determine which one, if any of these, is the model build year and spec you have, that would be handy. Did you tell whoever you spoke to the serial number of your computer, so they'd know by looking up the specs to see what the supported maximum RAM upgrade capacity was, and other minimum requirements to make any upgrade to Mac OS X 10.6.8 at all?
If you have the serial number you can do a lookup to 'indentify by serial number' online, and use that information to determine if the computer needs even more RAM to take it past the minimum for Snow Leopard 10.6.8 and then get it ready to upgrade (via paid download from App Store, Snow Leopard gets you that far) and see what the next supported OS X full upgrade would be for the hardware limitations on that old MacBook.
If your MacBook IS a 4.1 build, the highest OS X it could run if it has the 2.4GHz cpu, is Lion 10.7.5. That would be an upgrade from the App store, available to OS X 10.6.8+ computers that access it online. And I kind of doubt how supported a newest iphone etc may be in lion.
everymac.com has a fair amount of information across many years of Apple computing hardware...
Here's the three MacBooks that share the 4.1 designation; first shipped with as much as 1GB RAM upgrade and the other two only a 2GB RAM*, (one white/one black color) according to this information...
• MacBook "Core 2 Duo" 2.1 13" (White-08) 2.1 GHz Core 2 Duo (T8100)
• MacBook "Core 2 Duo" 2.4 13" (White-08) 2.4 GHz Core 2 Duo (T8300)
• MacBook "Core 2 Duo" 2.4 13" (Black-08) 2.4 GHz Core 2 Duo (T8300)
...as seen here: http://www.everymac.com/systems/apple/macbook/index-macbook.html
*But according to MacTracker (free: download database) http://mactracker.ca
these MacBooks can use more RAM in aftermarket specs as much as:
Maximum Memory
6.0 GB (Actual) 4.0 GB (Apple)
Memory Slots
2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM
To get more information use a service such as this...
•identify by serial number:
http://www.powerbookmedic.com/identify-mac-serial.php
The Apple? store or whoever you talked, to may have been as accurate as they could be without further research. Could be you may have a newer or older MacBook, which would change whatever later OS X it could run past 10.6.8. And to go past Snow Leopard, you need to download the last bits for 10.6.x to be able to go and get any later upgrade. The ones that may let a newest iphone or ipad work with it, are past SL10.6.8
Anyway, as you further verify the model build year and configuration specifications, report back.
Good luck & happy computing! -
I need to upgrade my macbook ram and hard drive pls help
Hi all,
I need to upgrade my macbook's RAM and hard drive as after 3 yrs of use it is showing signs of aging.
I am novice in hardware stuff. I am planning on doing it entirely by myself and on tight budget will need to compare the prices across sellers and buy a suitable peice of kit. Please help
Questions:
1 - How to find out which RAm do I need to buy and what is the maximum I can go on my macbook?
2 - How to find which hard drive to buy and what is the maximum my macbook will support?
3 - Can I buy the SSD drive instead of SATA for this macbook?
Some of the specs are listed below:
Hardware Overview:
Model Name: MacBook
Model Identifier: MacBook5,2
Processor Name: Intel Core 2 Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 2 GB
Bus Speed: 1.07 GHz
Boot ROM Version: MB52.0088.B05
SMC Version (system): 1.38f5
MANY THANKS FOR READING AND REPLYING TO MY POST
[email protected]Hi Chefjeegar
Yes that screwdriver kit has the #00 phillips screwdriver that you need to access the RAM and hard drive. You'll also need the Torx driver to change the hard drive. http://www.amazon.co.uk/LINDY-Computer-Technician-Precision-Torx/dp/B0000934GO/r ef=sr_1_1?s=computers&ie=UTF8&qid=1348072554&sr=1-1
For a good explanation about RAM look at the page on OWC http://eshop.macsales.com/shop/memory/MacBook/DDR2/
In the UK Amazon or eBay might be your best bet for cheap RAM but read the description and reviews carefully. For a little more expensive but with a better warranty is Crucial UK http://www.crucial.com/uk/
A good resource for working on your MacBook is ifixit.com http://www.ifixit.com/Device/MacBook_Core_2_Duo
Is your external hard drive formatted for Mac? To transfer your current hard drive I like the free application Carbon Copy Cloner. It makes a bootable copy of everything on your hard drive http://www.bombich.com/index.html Check that it's set up right by booting up from the external drive. Put the new drive in your MacBook, then format and partition the new drive. Then use Carbon Copy Cloner to transfer your OS back to the new drive.
Yes, you can put an SSD in the MacBook. -
I need to upgrade my MacBook 13" white 2008 hard drive. I have found a WD6400BPVT western digital Scorpio blue 640GB (5400rpm) SATA 8MB 2.5" will this fit and work? Many thanks for any help
I had a 640GB HDD in my Early 2008 Macbook and it was just too much it would always freeze up the computer a bit for only a few seconds but ya. Then I realized that it was the size of the HDD that was causing it since the Early 2008 Macbook models can only handle a MAX od 500GB while the Early 2008 Macbook Pros could have a MAX of 640GB (Lucked out there!) lol But ya the Early 2008 Mocbooks can only handle a MAX HDD size of 500GB and that's it!! lol
-
Now I have a Sony HDR-PJ230 and it is not recognized in iMovie09. Do I need to upgrade to iMovie 11 or ???
Hi jcm2656,
iMovie ’09 does not support the Sony HDr-PJ230 camcorder. See this article for a list of cameras supported for that version of iMovie -
iMovie '09: Camcorder Support
http://support.apple.com/kb/HT3290#1
iMovie ’11 however, does support it. See this article -
Apple - iLife '11 Help - iMovie ’11 Supported Cameras
http://help.apple.com/imovie/cameras/en/index.html
Note that iMovie does not support footage recorded in 1080-60p from this Camcorder.
Thanks for using Apple Support Communities.
Best,
Brett L -
I noticed that Find My iPhone on iCloud hasn't worked since iOS 8 came out. Whenever I try to use it, it always says "All Devices Offline." This is regardless of whether I am in a good Wi-Fi zone or not. I like to use Find My iPhone to remotely track my battery charging status whenever my phone is charging in a different room. That's been really handy, which is why I really need to get this fixed. No matter what computer I use, the problem is always the same.
My device uses iOS 7. My question is: do I need to upgrade my device? If not, what should I do? I do not wish to upgrade my device, especially considering the bad things I've heard about iOS 8.
Feedback would be welcome ASAP.You don't need to update to iOS 8 to use Find My iPhone. If you haven't already tried, go to Settings>iCloud>Find My iPhone and turn it off, then reset your phone (hold the sleep/wake and home buttons at the same time until you see the Apple logo, then release). After it restarts, turn Find My iPhone back on and see if it works properly now.
-
I need to upgrade the silverlight version that is deployed with the SCCM 2012 client installation
We have SCCM 2012 SP1 installed and I need to upgrade the version of silverlight that get installed on the client deployement.
The version that is automaticly deployed is 5.1.10411.0 and this one is not compatible with Firefox. When you click on Application Catalog it start the browser but it fails to load because of the silverlight plug-in that is not up to date. The
version that is working fine is the 5.1.20913.0 and it's already installed on my SCCM site server.
So that is why I'm looking to upgrade the silverlight that is installed with the SCCM client.
I know that a simple workarround would be to create a package that would be deployed after the client gets installed, but why not changing the original package at the source instead of installing twice the same software the get the right version!
Is there someone that could point me where I could upgrade this Silverlight prerequirement software version ?Note that I have not tested either of these and they will not be supported by Microsoft.
1. Copy your new version of Silverlight.exe to C:\Program Files\Microsoft Configuration Manager\Client\i386
(you'll have to re-distribute the client package after this).
OR
2. You could edit the ccmsetup.xml file with an alternative location for silverlight.exe
</Item>
<Item FileName="i386/Silverlight.exe" FileHash="417B442E128D821119008ACEEEE6CDC2A41224377A829B6EC52BABA2724F0151">
<Applicability Platform="ALL" OS="ALL">
<Skip>Embedded</Skip>
</Applicability>
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson -
I have an older iPhone (3gs) and need to upgrade to a newer phone (4S). I need to get my NOTES, CALENDAR, CONTACTS, PICTURES, etc backed up on iTunes so I can get that data loaded onto the new phone. But not sure how to do that. When I open iTunes it has a button that say "Back Up iPhone", but I'm not sure what that does. When I go into the sync options it say I have another user account and asks me if I want to merge of replace. I'm assuming it's trying to tell me I have an older iTunes Library, but don't know that. Geez, maybe people over 60 shouldn't have iPhones, iTunes just bafles me.
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
-
Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.
@ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
@ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!)
@ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack. i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot.
Thanks fo rall yor help! -
Need to upgrade memory in ppc mac mini
Does anyone know of a step by step guide with pictures to installing memory in a ppc mac mini? Need to upgrade to a gig to use some graphics software. Thanks,
SteveIn sleep mode (STR) the RAM has to be refreshed to
keep the memory content, so the more you got the more
power will be consumed on this.
Having less ram will therefore benefit battery life
in sleep mode.
This is only of concern to portable users of course, and the additional RAM has barely any impact on power demand whether from mains-power or battery. Some admittedly, but not much. Nor would it be all that easy to tell what drain it caused since there are other variables involved with battery drain rates too, such as ambient temperature.
There is still room for improvement in whatever
algorithm it is that determines when "inactive"
memory is released. Paging frequently happens after
copying large files since all memory is in use and
"recently" so, even if this use is one where the
content is NOT likely to be needed again.
The much hyped idea that "old" inactive memory is
being released when more is needed I find it
difficult to confirm, or paging would not be needed.
Simply caching EVERYTHING does not in my mind count
as an "intelligent" algorithm..
As much as this may be valid, there is no way the user is able to change the algorithm - it's part of the operating system. As such, the user can really only take such steps as may be possible to improve the working of the system - one significant such step being adding RAM.
This can be cleared up by running "repair
permissions" in DU, since it seems to release much of
the inactive RAM. It would be much better to have a
small utility to do this, though, if making the OS
more intelligent is not an option.
Running disk utility may be an effective method of resolving memory allocations etc, but it then places the onus on the user to monitor the system and manually activate a process. Part of the appeal of MacOS to many people is that it removes much of the onus users of other operating systems feel is placed on them to keep tuning the system - activities which detract from the use of the system.
Ultimately, I have to say that I have never found the need to do anything of that sort. I do use MenuMeters (a very neat little app to place system monitoring tools in the menu bar and which uses barely any CPU overhead to do so) to watch the status of my system, but only as an occasional troubleshooting aid when I'm testing software or experimenting with the system. That is about as far as I go with anything other than using the system. Certainly, I've not found any need to perform the sort of tasks that are often being recommended, and even the systems I run 24/7 remain efficient in operation.
I can say that while my G4 was running off a 5400rpm drive, increasing RAM from 768Mb to 1.5Gb quite dramatically improved performance of both 10.4 and 10.2 but had little benefit in OS9 (all booting from separate drives). The effects were rather less noticeable after swapping out to 7200 drives instead.
Maybe you are looking for
-
What is happening overriding method in JVM(urgent -------------------- )
how to know , what is happeing in jvm abstact class abstractTest{ public abstract void abstractmethod(); public void method{ System.out.println("hai i am in abstact class"); }//end of class public class runClass extends abstractTest { pubic void meth
-
Can anyone please tell me what is the IDOC type to be used for EDI 110 inbound? To add to the above question, this will be direct FI Posting. There is no Invoice Verification. This is really urgent. If anyone known about EDI 110 please guide Thanks,
-
how to uninstall Sentinel Runtime Drivers so I can upgrade from Windows 8 to 8.1?
-
HT4623 can i downgrade to ios6 to ios5.1
Hi, I recently upgrade my phone to IOS6, but I don't like it. So, can i downgrade again to previous version (ie.IOS5). Please reply ASAP. Thanks Regards, Robinson
-
My brother has a iPod charger, not apple branded. It's something like a multi-charger. It has a apple charger, then a couple more chargers. He says it wont connect the iPod to iTunes. Now my first thought is, maybe because it isn't made by Apple. I h