Do I need to upgrade Windows Server 2003?

What roles are you running on your Server 2003? Less than 15 workstations, any plans for future growth?

I work at a small office, pediatrics.  I want to know if I still need to upgrade our server since we are using cloud-based for our EMR system. We only have less than 15 computers running on Windows server 2003. The server is mainly used for shared folders and shared printers only.  I need your advice. 
Thank you.
This topic first appeared in the Spiceworks Community

Similar Messages

  • Auto rollback with no error when upgrading windows server 2003 sp2 to windows server 2008 R2

    Hi, I have a server needs to upgrade from windows server 2003 sp2 to windows server 2008 r2.
    It should be supported from technet site
    And yes, it went through all the list of upgrade. After rebooted, it told me "the upgrade was not successful, Your previous version of windows is being restored. Do not restart your computer during this time.".
    Is there a place located the upgrade failure log? What's the common cause about the auto roll back?

    Thanks for the reply.
    I copied some sentences in Setuperr.log
    2014-07-10 23:58:33, Error                       
    Failed to find driver file path. Error=00000002x[gle=0x80092004]
    2014-07-10 23:58:45, Error      [0x0805e6] MIG    File 'C:\WINDOWS\SysWOW64\cpqteam.cnt' is unsigned! (Failed with error code 0x2 (2): Failed with error code 0x2 (2): Failed with )[gle=0x00000490]
    2014-07-10 23:58:45, Error      [0x0805e6] MIG    File 'C:\WINDOWS\SysWOW64\cpqteam.hlp' is unsigned! (Failed with error code 0x2 (2): Failed with error code 0x2 (2): Failed with )[gle=0x00000490]
    2014-07-11 00:06:19, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll,
    {8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
    2014-07-11 00:06:20, Error      [0x08085e] MIG    UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll]
    does not exist.[gle=0x00000003]
    2014-07-11 00:13:58, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll,
    {743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
    2014-07-11 00:18:56, Error      [0x0803db] MIG    IndirectKeyMapper: Cannot find the currently loaded location for hive X:\Documents and Settings\####\NTUSER.DAT; giving up (2).[gle=0x00000003]
    2014-07-11 00:30:58, Error                 SYSPRP SPPNP: Error 0x25 (CONFIGRET) occurred while determining the buffer size needed to hold the list of devices that are using service
    usbhub20.
    2014-07-11 00:30:58, Error                 SYSPRP SPPNP: Error 0x424 occurred while opening a handle to the service usbhub20.[gle=0x00000424]
    2014-07-11 00:38:08, Error      [0x080973] MIG    Ignoring apply for object: C:\WINDOWS\Panther\setupact.log[gle=0x000003f0]
    2014-07-11 00:38:08, Error      [0x080973] MIG    Ignoring apply for object: C:\WINDOWS\Panther\setuperr.log[gle=0x000003f0]
    Is it caused by driver error, MediaPlayer-DLMigPlugin.dll
    and drmmgrtn.dll?

  • Upgrade windows server 2003 to windows server 2012 in power edge 2950 server

    Require help on installing windows server 2012 in dell power edge 2950 server.
    I have booted server by windows server 2012 DVD, but its not booting from DVD, Kindly help in installing windows
    Is the data will be lost after installing windows 2012?
    Do i need to update the drivers and firmwares, if yes please specify the driver and firmwares to update
    Current installed drivers
    Current OS: windows server 2003
    RAID 5, SATA hard disk
    BIOS: 2.2.6
    BMS: 1.97
    RAC: 1.32
    PERC/6 = Firmware = 6.0.2
    Driver: 2.14
    This topic first appeared in the Spiceworks Community

    Hi thereCan anybody give me good suggestions for an AV System?
    I have to protect 3 Windows DMZ Servers (2 Webservers and 1 Hyper-V Server)What points are important and on what points should I pay attention.I've read some reviews and Kaspersky seems to be a good solution, does anybody already have experience with Kaspersky.And which Kaspersky product should I choose for my case:http://usa.kaspersky.com/store/business-security/?PID=3471305http://www.kaspersky.com/de/business-securityCan I also buy the products form the first link, when I live in another country than in the States.
    Greetings

  • Upgrading windows server 2003 domain controller to windows server 2008

    Hello friedns :
    We have a company with about 2000 users , and two windows server 2003 domain controllers , one of them acts as a primary domain controller , and the other acts as secondary domain controller , all the FSMO s are on the primary DC ,we have decided to upgrade all of our servers from windows server 2003 to windows server 2008 , the first step is to upgrade the domain controllers to windows server 2008 , our domain controllers are so sensitive and has to be active 24 hours a day , i have stress upgrading it to windows server 2008 , what is the best solution to upgrade it with no risk ?
    ( i have an opinion but i am not sure and i dont have any guide about it , i want to install a windows server 2008 and promote it as an additional domain controller to the windows server 2003 DC and the transfer all the FSMOs to it , and then promote the first domain controller !!! is that possible ? if yes , is there any guide about it? )
    If there is a guide available for it please let me know . (Specially if there is a tip & trick)
    thank you guys.
    Network is my LOVE

    Hi,
    This TechNet online article might be helpful for you.
    How to Upgrade Domain Controllers to Windows Server 2008 or Windows Server 2008 R2
    http://technet.microsoft.com/en-us/library/ee522994(WS.10).aspx
    For your convenience, I have list some general steps for your reference.
    Since the following operation have potential damage to Active Directory database, it is highly suggested that you'd better perform a full backup of Active Directory (System State) firstly. Also it is better to test the following procedure in a similar lab environment first.
    General Steps:
    =============
    1. Verify the new server's TCP/IP configuration has been pointed to the current DNS server.
    2. Make the new server become a member server of the current Windows Server 2003 domain first.
    3. Upgrade the Windows Server 2003 forest schema to Windows Server 2008 schema with the "adprep /forestprep" command on old server.
    Please run the "adprep.exe /forestprep" command from the Windows Server 2008 installation disk on the schema master. To do this, insert the Windows Server 2008 installation disk, and then type the following command:
    Drive:\sources\ADPREP\adprep.exe /forestprep
    4. Upgrade the Windows 2003 domain schema with the "adprep /domainprep" command on old server.
    Please run the "adprep.exe /domainprep" command from the Windows Server 2008 installation disk on the infrastructure master. To do this, insert the Windows Server 2008 installation disk, and then type the following command:
    Drive:\sources\ADPREP \adprep.exe /domainprep
    5. Insert Windows Server 2008 Installation Disc in the new server.
    6. Run "dcpromo" on new server to promote it as an additional domain controller in existing Windows 2003 domain, afterwards you may verify the installation of Active Directory.
    Please refer to:
    How to Verify an Active Directory Installation in Windows Server 2003
    http://support.microsoft.com/kb/816106
    7. Verify the new server's TCP/IP configuration has been pointed to current DNS server.
    8. Enable Global Catalog on new server and manually Check Replication Topology and afterwards manually trigger replication (Replicate Now) to synchronize Active Directory database between 2 replicas.
    Please note: It will some time to replicate GC between DC, please wait some time with patience.
    9. Disable Global Catalog on the old DC.
    10. Transfer all the FSMO roles from the old DC to the new DC.
    Please refer to:
    How to view and transfer FSMO roles in Windows Server 2003
    http://support.microsoft.com/kb/324801
    11. Verify that the old DNS Server Zone type is Active Directory-Integrated. If not, please refer to:
    How To: Convert DNS Primary Server to Active Directory Integrated
    http://support.microsoft.com/kb/816101
    Note: Active Directory Integrated-Zone is available only if DNS server is a domain controller.
    12. Install DNS component on new server and configure it as a new DNS Server (Active Directory Integrated-Zone is preferred). All the DNS configuration should be replicated to the new DNS server with Active Directory Replication.
    13. Make all the clients change TCP/IP configuration to point to new server as DNS.
    14. You may configure TCP/IP on all the clients, or adjust DHCP scope settings to make them use the new DNS server.
    Please note: It is a good practice to make the old DC offline for several days and check whether everything works normally with the new server online. If so, you may let the old DC online and run DCPROMO to demote it.
    Hope it helps.
    Regards,
    Wilson Jia
    This posting is provided "AS IS" with no warranties, and confers no rights.

  • Upgrade has been disabled : Windows Server 2003 to 2008 Upgrade

    To whom it may concern :
    I have a virtualized Windows 2003 Web Edition (x86) that needs to be upgrade to Windows Server 2008 (x86).  It has several web applications installed and configured thus clean install of Windows Server 2008 is not an option.
    In short, I get a "Upgrade has been disabled" message. 
    It also says, "You cannot upgrade from Windows Server 2003 Web Edition to Windows Web Server 2008.  You can upgrade to ."  Would you please help?
    FYI. the Windows Server 2003 has a single partition and setupact.log as follow:
    2015-03-21 23:08:20, Info       [0x0a000a] UI     Autorun:Autorun core successfully  initialized!!!
    2015-03-21 23:08:20, Info       [0x0a000b] UI     Autorun:Autorun UI successfully  initialized!!!
    2015-03-21 23:08:21, Info                  UI     AppWindow has layout style 0
    2015-03-21 23:08:21, Info                  UI     NavWindow has layout style 0
    2015-03-21 23:08:21, Info                  UI     NavWindow has layout style 0
    2015-03-21 23:08:22, Info                  UI     Page with ID 2018 returned 0 for CanPageBeActivated with choice 0
    2015-03-21 23:08:22, Info                  UI     Page with ID 2002 returned 0 for CanPageBeActivated with choice 0
    2015-03-21 23:08:22, Info                  UI     Page with ID 1200 returned 1 for CanPageBeActivated with choice 0
    2015-03-21 23:08:22, Info                  UI     Page with ID 1200 returned 1 for CanPageBeActivated with choice 0
    2015-03-21 23:08:22, Info       [0x0a011c] UI     WizardDialogPost::SetActive
    2015-03-21 23:08:26, Warning    [0x0a0010] UI     WM_KEYUP for 9 key on 0
    2015-03-21 23:08:26, Warning    [0x0a0010] UI     WM_KEYUP for 16 key on 0
    2015-03-21 23:08:26, Warning    [0x0a0010] UI     WM_KEYUP for 16 key on 0
    2015-03-21 23:08:26, Warning    [0x0a0010] UI     WM_KEYUP for 17 key on 0
    2015-03-21 23:08:26, Warning    [0x0a0010] UI     WM_KEYUP for 17 key on 0
    2015-03-21 23:08:26, Info       [0x0a018e] UI     Passing command line parameter ("D:\Sources\setup.exe /HideWelcome /uilanguage:en-US /targetlanguage:en-US") to IBS.
    2015-03-21 23:15:51, Info       [0x0a013b] UI     Cancel rejected. Remaining on Page Install Windows.

    Looks like you'll need to clean install it.
    From the following versions of Windows Server 2003, there are no supported upgrades:Windows Server 2003 Web Server Edition SP2 and Windows Server 2003 Web Server SP1
    https://support.microsoft.com/en-us/kb/951041
     These ones may help.
    http://blogs.iis.net/bills/archive/2008/06/18/how-to-migrate-from-iis-6-to-iis-7.aspx
    http://www.iis.net/downloads/microsoft/web-deploy
    Also might ask over here.
    http://forums.iis.net/
    http://forums.asp.net/
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • How to upgrade Windows Server 2008 Foundation to Windows Server 2008 Standard

    I have a Dell server with Windows Server 2008 Foundation installed. I am now on a larger network which has their own servers for authentication and the Windows Server 2008 Foundation will not let join a domain with more than 15 users. I was told that I needed
    to upgrade Windows server 2008 foundation to Windows server 2008 Standard and that process can be done "in place" but I can't find how do do it. I called Dell and they said they basically said they didn't know what I was talking about.
    How do I  do this?

    According to the first one you can perform an in-place upgrade.
    Introduction to Windows Server 2008 Foundation
    http://technet.microsoft.com/en-us/library/dd459191(WS.10).aspx
    How to Perform an In-Place Upgrade on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
    http://support.microsoft.com/kb/2255099
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]

  • TS140 Windows Server 2003?

    I have a customer with a new TS140 who needs to load Windows Server 2003 on the box.  The reason for having to load Windows Server 2003 is a legacy piece of software that is not compatible with newer versions of Windows.
    This is a TS140 70A4 001MUX model. It meets system requirements for the OS (we were able to purchase a Lenovo Enterprise Server 2003 OEM license from a liquidator) but the system is newer than any actually listed in the HCL for WIndows Server 2003
    Initial attempts to install using Lenovo OEM Windows Server media results in a blue screen, unsurprising given the chronological distance between the OS media and the hardware.
    EasyStartup Version 3.8.1d shipped with the server but 2008 is the earliest OS listed in the pick list.  Is there an earlier version that loads drivers for this hardware for Server 2003?  Failing that are there drivers that can be slipstreamed into the OS install media?
    The big question:  Has anyone actually installed Server 2003 on this hardware?  Should I even bother trying?
    Thanks for any help,
    Coypu

    Got a fix for you:
    install Hyper-V 2012 R2 on the TS140 ( it's free!)
    http://technet.microsoft.com/en-us/evalcenter/dn205299.aspx 
    then...  install your 2003Server as a VM.
    Access it through any workstation running Remote Desktop connection.
    Or access if directly from the "server Core Hyper-V" machine by running the (free!) Hyper-V Tools. ( this provides a GUI, and remote desktop client)
    see  http://www.probus-it.se/hypervtools 
    another great tool for those running Hyper-V 2012 "core" (the free OS with no GUI) is the very handy A43
    see http://www.a43filemanager.com/
    more great tools here... http://hypervking.info/hyper-v-tools/ 

  • Integration - Windows Server 2003/2008R2: Creating a login script that attaches programs to a certain user group. Upgrading to Windows 7/8

    We are currently running a windows server 2003 environment with a 2003 server being the DC. We have a couple of 2008 r2 servers that are member servers.
    OK...
    Our users are primarily operating off of windows xp clients/workstations in which they use RDP to connect to the newer member servers that are windows 2008. With their base profile in xp I am using roaming profiles via server 2003. I am looking to begin
    upgrading all of the workstations to all-in-one windows7/8 boxes partially because of cosmetic reasons(#weird) and partially because we will eventually begin using the camera options that are in the all-in-one's.
    Also..I must do this one at a time as we don't have the money to do a complete overhaul of all client workstations..If that was the case, I could just redo the network and make those members servers the DC and backup DC as well as add a virtual server
    in which everyone can access those legacy programs that are still needed...
    As you guys know windows 7/8 boxes will not work with server 2003 and roaming profiles. The reason we don't completely upgrade to 2008 r2 environment is because we are still holding on to a legacy program that requires server 2003 and these programs are
    vital to our operation.
    So..broken down even further...
    A: User is part of a 'LocalAdmins' group that makes them automatically a local admin upon any system within our domain.
    B: User  logs in to windows xp with credentials in which a tailored made per user roaming profile comes up from server 2003
    C: User then logs into one of the two terminal servers via RDP with same credentials and accesses new primary application. To access the legacy applications, they merely minimize their RDP session to get back to the windows xp session.
    Ultimately..
    1. I'd like to begin replacing option B: with windows 7/8 all-in-ones and and have the RDP saved sessions,that talk to the 2008 member servers, as well as, a few vital ie shortcuts automatically come to all users that are apart of that "LocalAdmins
    group period.
    2. Setup 1 server 2003 box that runs that legacy program and allow everyone access via a Virtual Environment..
    3. If they log into a windows xp box, or a windows 7/8 box, I want them to have access to the same icons.
    I guess this is a lot to digest, but my question is, what script could I make that would essentially allow uniformity for both my xp workstations and newly added windows 7/8 boxes? What script could I create that would,I guess reside on server 2003, that
    brings all the neccessary icons to the users that are apart of that "LocalAdmins" group despite having a windows xp, 7, or 8 workstation?

    " I don't see what the issue is because a logon script will still be managed by Group Policy and will have to be applied using GP rules.  In the end you still have to write the script."
    You basically contradicted the smug part of your rant and multiple answers with this statement!!! You just recognized that some sort of script would be necessary if I chose to use it via group policy. 
    But according to you..
    "It is not and has never been done via a script."
    Clearly it has a section per user for a "profile path" and a "logon SCRIPT". Which warrants my creation of this post since I have currentely implemented
    roaming profiles. That is how I am manipulating what users can have on their desktop because of course, we have different users that have different needs. But out of all the users, there are programs that need to be laced and seen upon immediate login.I
    will consult other people as this is only preliminary planning but about half of your statements are completely unwarranted and UNNECESSARY!
    This statement also proves your additional inaccuracies...
    "All of the profile things are handled by Windows and have nothing to do with scripts.  You define all of that in Group Policy."
    That's just silly talk. I told you in my initial break down of my scenario in an entirety that I am using "tailored made per user roaming profiles" to control desktop environments not group policies in this case. But you just made an absolute statement in
    saying "You define all of that in Group policy" which is completely wrong...
    Do me a favor, please don't respond to this post anymore. I'd love to see if any other partner, staff or whatever mind responding. Thank you for your help anyway. I will use what is useful in your post and discard the rest.
    Thanks

  • Upgrade from Windows Server 2003 to 2008

    Hi Experts,
    We are currently running SAP BPC v 7.0 for Microsoft in a Windows Server 2003 environment. This is not a production application right now as we are doing discovery work in SAP BPC 7.0. For another project, we need to upgrade to windows server 2008.
    We are trying to figure out if the SAP BPC will still work after the upgrade. I know SAP BPC is compatible with Server 2008, but do we need to start of a fresh installation or the upgrade will work. We are trying to figure out if we should plan some time to reinstall SAP BPC and re-do the work we have done in BPC once it has been upgraded.
    Thanks a lot!
    Martin

    At this point, BPC 7.0 for Microsoft is not certified for Windows 2008.  So, if you prepare and execute the upgrade to the server OS, support may not assist if you find any issues.  We plan to be certified on Windows 2008 with the next release of 7.5 for BPC.
    Hope this helps.

  • Upgrading Virtual Windows server 2003 to 2008

    We currently run VI 2.5 with 3.5 U2 servers in a cluster. I was trying to upgrade (in place) a Windows server 2003 st. to Windows Server 2008. However when doing this the guest becomes unresponsive at (completely black screen in the console windows) and the setup reboot the guests and I boots back into 2003 (stating that the setup/upgrade failed). Is there a trick I need to be aware of?

    A big thanks to you my friend... I followed your steps and it actually works on my environment... currently I got 2-3 more Windows 2003 servers that needed to be upgraded to Windows 2008. However to save cost we are doing it ourselves... below is the steps I taken following your steps:
    Do note that I did this in VSphere 4.0 Update 2 version. One more thing... Ensure you got at least 20GB HDD free space in boot drive before you do the steps below else it will be like me the first time doing it...
    1. Windows 2003 VM - Remove/Uninstall the VMware Tools from the Control Panel.
    2. Shut down the Windows 2003 VM. You do not need to restart because you need to change the Guest VM OS from Windows 2003 to Windows 2008 R2. Once the Guest OS is changed, start the Windows 2003 VM.
    3. Suffer a bit on the screen resolution but you can tweak it back to 1024 x 768 using the default VGA drivers. Recommend to do this so that it would be easier to work with a bigger desktop.
    4. Go to the Device Manager Tab to disable the "Base System Device". This took me a while to confirm the location because of the bad mouse (It will happen after VMware Tools is removed).
    5. Proceed to do the Windows 2008 upgrade.
    Hope this steps will help others...

  • Windows server 2003 Standard edition RAM Upgrade

    We are using Windows server 2003 Standard 32 bit edition in our office With HP ProLiant DL580 Generation 5 hardware , We are trying to upgrade RAM to 8 GB from 4 GB but it is not taking, It is detecting 8 GB RAM while booting but not showing in my computer
    property. 
    Same thing we tried with Windows server 2003 Enterprise edition and it is working fine there.
    Is there anyway to upgrade it ?

    It is normal. You simply need to use a 64 bit OS.
    You need to re-install the OS to be running a 64bit version as no in-place upgrade is supported.
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • Need a Way to Create a Local Group Push via GPO on Windows Server 2003 DC

    There is a new requirement to create a new local group on all machines and add all local and built-in administrators. To save time, I would like a GPO to create the new group, along with configuring its members. Any helpful information I found
    is for Windows Server 2008 and up.
    Does anyone know what I can do with my Windows Server 2003 DC?
    Thanks,
    Jasmin

    > Does anyone know what I can do with my Windows Server 2003 DC?
    Since DCs do not have local groups - what OS are your member servers and
    clients running? If 2003/XP: Install KB943729
    You need _one_ computer running Vista/2008 or higher to edit your GPO.
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

  • Failed Windows Server 2003 Enterprise SP2 to Windows 2008 Enterprise OS Upgrade

    Attempted to upgrade the OS on our Primary Domain Controller which is running Windows Server 2003 Enterprise with Service Pack 2 installed on a HP ProLiant DL360 G4P Server with 2GB of ram, 3.2 GHz Processor and 53.2 GB of free space on C.  I took
    the following steps prior to attempting upgrade.
    1. Determined that Server meet the minmum requirements for upgrade.
    2. Installed all Windows Updates.
    3. Uninstalled McAfee Virus Scan Enterprise Application
    4. Backed Up and Imaged Primary Domain Controller.
    5. Tested Domain Replication to ensure Primary and Backup Domain Controllers were communicating with each other.
    6. Set Domain Function Level at Windows Server 2003
    7. Placed ADPREP folder on C:\ on Primary Domain Controller and ran "adprep /forestprep" and "adprep /domainprep" successfully
    8. In the C:\Windowd\System32 renamed the WindowsPowerShell application folder to WindowPowerShell-Old, the application failed the Upgrade compatibility test.
    Loaded the DVD: "Windows Server 2008 for Enterprise, Standard and Datacenter 32bit Edition", ran installation in upgrade mode to preserve existing settings and software.  The Ugrade ran to last step, application install and failed at
    26% complete with the following errror message:
    "Windows installation encountered an error and cannot continue. Your computer will now restart and your previous version of windows will be restored"
    My questions are why did the upgrade fail?  What can we do to ensure the upgrade will succeed next time?
    I have incuded the Setuperr.log below.
    2014-08-24 08:48:27, Error      [0x08081e] MIG    Failed to load manifest at C:\$WINDOWS.~BT\Sources\dlmanifests\errorreportingfaults-dl.man: class UnBCL::XmlException:  hResult = 0x0, Line = 2, Position = 134;
    void __thiscall UnBCL::XmlDocument::Load(class UnBCL::String *)
    2014-08-24 08:48:30, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:48:30, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:48:30, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:48:35, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:48:35, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:48:35, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:48:35, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:48:35, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:48:35, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:48:35, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:48:35, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:48:35, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:48:58, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:48:58, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:48:58, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:48:58, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:48:58, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:48:58, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:48:58, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:48:58, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:48:58, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:48:58, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:48:58, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:48:58, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:48:59, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:48:59, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:48:59, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:48:59, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:48:59, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:48:59, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:48:59, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:48:59, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:48:59, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:48:59, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:48:59, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:48:59, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:49:09, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:49:09, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:49:09, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:49:09, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:49:09, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:49:09, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:49:09, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:49:09, Error      [0x08085f] MIG    MigHost: CMigPluginSurrogate::LoadAndRegisterServerInThreadContext: LoadLibraryExW(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, LOAD_WITH_ALTERED_SEARCH_PATH)
    failed gle=0x7f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x080863] MIG    MigHost: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: LoadAndRegisterServerInThreadContext() failed hr=0x8007007f.[gle=0x0000007f]
    2014-08-24 08:49:09, Error      [0x0808ff] MIG    COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-IE-ESC\EscMigPlugin.dll, {196B9C00-9ECD-11DB-AF15-0014223890F3},
    0) failed, hr=[0x8007007f].
    2014-08-24 08:49:18, Error      [0x08071d] MIG    CDownlevelOCStore::GetOCCollection, Failed to load C:\$WINDOWS.~BT\Sources\dlmanifests\errorreportingfaults-dl.man.: class UnBCL::XmlException:  hResult = 0x0, Line
    = 2, Position = 134; . .
    void __thiscall UnBCL::XmlDocument::Load(class UnBCL::String *)
    2014-08-24 08:49:22, Error      [0x08081e] MIG    Failed to load manifest at C:\$WINDOWS.~BT\Sources\dlmanifests\errorreportingfaults-dl.man: class UnBCL::XmlException:  hResult = 0x0, Line = 2, Position = 134;
    void __thiscall UnBCL::XmlDocument::Load(class UnBCL::String *)
    2014-08-24 09:13:05, Error      [0x080792] MIG    COCEventTracing::COCEventTracing Failed to call StartTrace 87.[gle=0x00000057]
    2014-08-24 09:14:26, Error      [0x0802b6] MIG    Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\AutoEnrollment [EventMessageFile]. Exception class Mig::Win32ErrorException: Win32ErrorException:
    Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\AutoEnrollment [EventMessageFile]], which is protected by WRP..
    void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
    2014-08-24 09:14:26, Error      [0x0802b6] MIG    Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\AutoEnrollment [TypesSupported]. Exception class Mig::Win32ErrorException: Win32ErrorException:
    Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\AutoEnrollment [TypesSupported]], which is protected by WRP..
    void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
    2014-08-24 09:14:27, Error      [0x0802b6] MIG    Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\Tlntsvr [EventMessageFile]. Exception class Mig::Win32ErrorException: Win32ErrorException:
    Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\Tlntsvr [EventMessageFile]], which is protected by WRP..
    void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
    2014-08-24 09:14:27, Error      [0x0802b6] MIG    Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\DfsSvc [EventMessageFile]. Exception class Mig::Win32ErrorException: Win32ErrorException:
    Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\DfsSvc [EventMessageFile]], which is protected by WRP..
    void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
    2014-08-24 09:14:27, Error      [0x0802b6] MIG    Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\DfsSvc [TypesSupported]. Exception class Mig::Win32ErrorException: Win32ErrorException:
    Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\DfsSvc [TypesSupported]], which is protected by WRP..
    void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
    2014-08-24 09:14:27, Error      [0x0802b6] MIG    Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\SCardSvr [EventMessageFile]. Exception class Mig::Win32ErrorException: Win32ErrorException:
    Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\SCardSvr [EventMessageFile]], which is protected by WRP..
    void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
    2014-08-24 09:14:27, Error      [0x0802b6] MIG    Could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\SCardSvr [TypesSupported]. Exception class Mig::Win32ErrorException: Win32ErrorException:
    Error(0), Skip opening registry entry [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\SCardSvr [TypesSupported]], which is protected by WRP..
    void __thiscall Mig::CRegistryDataStore::Create(class Mig::CDataUnit *)
    2014-08-24 09:30:13, Error      [0x060005] IBS    CallBack_StampRequiredDrives:An error occurred while fixing paths on black board GLE is [0x0]
    2014-08-24 09:30:13, Error      [0x064188] IBSLIB RollbackReinitialize: threw exception.: class UnBCL::ArgumentException: Directory "X:\$WINDOWS.~BT\Sources\Rollback" doesn't exists..
    __thiscall OSRollbackService::CCheckpointImpressario::CCheckpointImpressario(const unsigned short *,class OSRollbackService::CCheckpointSequence *,int)
    [gle=0x00000003]
    2014-08-24 09:33:19, Error      [0x0804b3] MIG    CMigWorkingDirHelper::CMigWorkingDirHelper() failed.: class UnBCL::DirectoryNotFoundException: root of directory to create not found.
    class UnBCL::DirectoryInfo *__stdcall UnBCL::Directory::CreateDir(const class UnBCL::String *)
    [gle=0x00000003]
    2014-08-24 09:33:19, Error      [0x0802fa] MIG    MigStartUp caught exception: class UnBCL::DirectoryNotFoundException: root of directory to create not found.
    __thiscall Mig::CMigWorkingDirHelper::CMigWorkingDirHelper(class UnBCL::String *)
    __thiscall Mig::CMigWorkingDirHelper::CMigWorkingDirHelper(class UnBCL::String *)
    class UnBCL::DirectoryInfo *__stdcall UnBCL::Directory::CreateDir(const class UnBCL::String *)
    [gle=0x00000003]

    Hi,
    Here are some limitation of upgrading:
    Upgrading is supported from x86-based and x64-based computers, but cross-architecture upgrades are not supported. 
    Cross-language upgrades are not supported.
    Upgrading from Windows Server 2003 to a Server Core installation of Windows Server 2008 is not supported.
    We cannot upgrade the failover clusters from Windows Server 2003 to Windows Server 2008. Before upgrading, we must uninstall failover clustering.
    For detailed information about Upgrading to Windows Server 2008, please refer to the link below,
    http://technet.microsoft.com/en-us/library/cc755199(v=WS.10).aspx#BKMK_Supported
    Besides, to confirm that it isn't an IO issue, could you please try to copy the DVD to the local disk?
    If error occurs, it may be an IO issue.
    Best Regards.
    Steven Lee
    TechNet Community Support

  • Issues when Sharepoint Services 3.0 OS upgraded from windows server 2003 standard to windows server 2003 enterprise

    In my sharepoint 2007, I have upgraded the OS from windows server 2003 standard to windows server 2003 enterprise R2 SP2. After the OS upgrade when I run the central admin it's showing this error "Microsoft Windows Sharepoint Services 3.0 Error 2908
    error has occurred" screen shot below of the error. 
    Any help?

    Not sure I can help.  In general MS does NOT support the upgrade of the Underlying OS without re-installing SharePoint.  Many of the prerequisites that were installed when SharePoint was installed are OS specific.  You can either contact
    Product Support and see if they can provide any assistance or re-install SharePoint from scratch and re-attach/migrate all the existing databases with content into the new system on the new OS.
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • Do I need the /3gb switch on Windows Server 2003 Enterprise Edition

    I have an Oracle 10g database running on a Windows Server 2003 Enterprise Edition with 16gb of RAM. Do I need to set the /3gb and or /PAE switch in the boot.ini file for Oracle to use this memory?

    This metalink doc talking pretty extensively about the setting
    Implementing Address Windowing Extensions (AWE) or VLM on Windows Platforms
    Doc ID: Note:225349.1
    As you might know 32bit system has limitation of 4G max addressable memory issue. In Windows that's 2G limit because Windows reserve 2G for system. With /3G switch you can let Application address 3G with 1G for OS, if your system has more than 4G you need to use /PAE to address memory beyond 4G.
    Of course if you don't plan to allocate more than 2G to Oracle SGA then don't need the settings.

Maybe you are looking for

  • Provisioning of User from OIM 11g to GooggleApps

    hi all I m trying to Provision of user from OIM 11g to google apps with Googgle App 11.1.1.5 (icf) connector. But while provisioning User I am getting the exception like javax.xml.parsers.FactoryConfigurationError: WebLogicSAXParser cannot be created

  • Default download action doesn't work

    Downloading files for a particular type no longer prompts me for action, but simply saves the file. The application is set to "always ask" in Options, and in desperation I have now changed all applications so that none of them are set to save a file.

  • Download Adobe Flash Player 11.5.502.110

    After installing the latest version of Adobe Flash Player 11.5.502.100, I have lost my streaming capabilities:  Netflix, radios, videos.  The installation completes correctly, but when prompted to click on a selection, the download screen appears aga

  • this one...Need help on a jsp

    is there a way to grab the selected value from a "drop-down menu' and use it in a query statement? here's my code: <label for="weatherStat">State:</label> <select name="weatherStat" id="States"> <%                          try {                Connec

  • Annoying Print Issue - "Multiple files are bound...."

    Anyone know how to disable the extra page that prints with PDF packages that's titled "Multiple files are bound together in this PDF package"? Basically, when I print out the documents that are packaged, this page prints out first - and it's very ann