Do I need to upload entire site after every change?

Publishing to a folder, then uploading with Fetch. If I make a change in on one page (and my site has 11 pages), do I need to upload the entire site every-time? I make changes and additions all the time.
iWeb 1.1.1.
Sorry if this topic has been discussed before. Thanks, Marcos

Marcos ~ Click below to read an article "Using Fetch with iWeb":
...it says:
"When you re-publish your website after making changes, iWeb re-creates every file, even if you just made one change on one page. As a result, if you are using Fetch's Mirror command to upload your website, every file will appear to be newer than the ones on the server, and all files will be uploaded again. This is a limitation of iWeb, and there is no way to work around it currently."
In September 2007 I asked the guys at Transmit about this and they replied:
"Transmit is in the same boat as Fetch. There is currently no workaround for this, as Transmit 3 was only designed to consider dates when synchronizing, not size. Transmit 4 will be able to compare sizes."
(The current version of Transmit is 3.6.5)
RBrowser has +Folder Syncronization+; click here:
"RBrowser's sync engine will automatically find your changes and publish your new and changed files only to the remote server."
...But perhaps you would have to buy the licensed version to get that feature:
"Absolutely unrestricted operations in all protocols (Local, FTP/SSL/TLS, SFTP-SSH), *including Folder Sync*."
...you could try the free version first and see if it has that feature.
Here's a comprehensive list of Mac file transfer software:
http://www.macorchard.com/filetransfer/
By the way, when publishing to .Mac, only the changed pages are uploaded.

Similar Messages

Can anyone help me with an iWeb problem? I cannot save the site after making changes. I receive this error: "website.sites2 could not be saved"

Can anyone help me with an iWeb problem? I cannot save the site after making changes. I receive this error: "website.sites2 could not be saved"

You could try duplicating the Domain.sites2 file and launch this in iWeb. Delete the last page you edited and try saving. If that doesn't work, undo and try deleting another and so on...
If you can find the problem page you would only have to rebuild it rather than the whole site.
The other possibility is to create a new site on the same domain file and drag each page in turn down to it from the top site and try to save each time.

Upload Entire Site

I run a 300+ page site that I need to make changes to on a
daily basis. When I upload, I send the entire site (just in case
there are new images etc. lurking in there).
Is this the best/only way to do this?

Which DW are you using? How many files are you typically
changing?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"ploughman1" <[email protected]> wrote in
message
news:ge9o3s$26e$[email protected]..
>I run a 300+ page site that I need to make changes to on
a daily basis.
>When I
> upload, I send the entire site (just in case there are
new images etc.
> lurking
> in there).
> Is this the best/only way to do this?
>

Why do I have to upload entire site each time?

Loving the iWeb stuff, except for one thing, and that is that when I change one of my hundreds of pages, I can't just seem to upload the few html pages, I have to upload everything.
One thing is I am using Adobe GoLive since I'm not using a .mac account and I don't know how to set up iWeb to upload. Even if I did, would iWeb only upload changed pages or would it not upload the entire site, every podcast, every media file, everything - it seems to when I publish to a folder.
Any refs or suggestions much appreciated.
thanks
enzosf
iBook G4 1.25G/G5 2 Gig DP 1.5Gig RAM Mac OS X (10.4)

Yes, it's true....when you are not publishing directly to .Mac, the only alternative you have is to "Publish to Folder". This publishes your entire site to a local folder. You would then need to use an FTP program to upload this to your 3rd party webserver.
I have heard good things about an FTP program called CaptainFTP. It is available here: http://captainftp.xdsnet.de/ The only reason I have remembered it is because it has some sort of synchronization function to its FTP capability and can sort out which files need to be uploaded and which files already exist on the server. For iWeb pages, I believe you have to turn off the "by date" method of detection.
Anyways, check it out. Do a search in this forum for CaptainFTP and you will see a bunch of comments and tips for using it. Good luck! I hope this helps you out.

I need help uploading my site

Hello, there i need help uploading my project on ROME by adobe i showed you what i did ok i clicked on output then clicked templete something forgot what that last word was then i pressed share then it ses you been loged out what do i do please help me

I made a website from that right then i maded everything then i tryed to share it on the site and it says i been loged out so what do i do if you want more details say what details you need to know

Help uploading Entire Site from iWeb

I'm really struggling here. I cannot get iWeb to publish my entire 4-page website. It uploads the site to GoDaddys servers, but when viewed online only the home page is visible..
I am on an iMac runing Safari 6.0.5 and iWeb is version 3.0.4
I have emptied my cash several times and visited the site on other computer but only the home page is viewable.... GoDaddy tried but could not help me.........anyone have a fix?
thanks in advance,
mike

This is covering the links :
http://www.propmakers.com/propmakers.com/Home_Page_files/bnr.gif
Move it down. Or out of the way.
I'm sure you must have seen the links before you covered them with the image.
Here are the other pages :
http://www.propmakers.com/propmakers.com/Page_2.html
And if you want the image in the nav layer, read the useful tip at the end of this page :
http://www.wyodor.net/Tutorials/iWebDemo/z-Index.html

Skip file when uploading entire site

Is there a way to skip one file or more during uploading? Say I am uploading the entire site and when I come to a big video file I'd like to skip this file...

Hi
Cloak the file(s) before selecting to upload the entire site.
Select the file - right click - select cloaking.
PZ

When using rogers.yahoo mail, I need to refresh my screen after every 2-3 actions.

While using Rogers.yahoo mail in FireFox, the screen freezes after every 2-3 actions (read email, delete email, respond to email, move email to folder etc.). I have to refresh the screen and then it goes along for another 2-3 actions and I have to refresh again. Very frustrating. I opened the same email account in Google Chrome and IE and it works fine there. This started happening yesterday.
In perhaps an unrelated thing, I get this error message every day, once, when I start up my PC for the past 2 months:
Microsoft.NET Framework
Unhanded exception has occurred in your application If you click Continue, the application will ignore this error and attempt to continue. If you click Quit, the application will close immediately. Unable to load DLL 'hppatusg01.dll': The specified module could not be found (Exception from HRESULT:0x8007007E)

No problem.
If the above does not fix the issue, '''try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
[[Image:FirefoxSafeMode|width=520]]<br><br>
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you.

Why do i have to keep pressing f5 after every change in CSS to see liveview?

I have to click/F5 on live view button after making changes in CSS every time i change anything. is there a way to make live view automatic?

Luis, I import the clip from a folder on my hard disk that does replicate the file on the camera card, and the clip does have a little camera icon in the bottom left corner of the screen (see the images below).

IWeb uploads entire site each time I publish

I have 3 sites in iWeb .. 2 are working fine, but one of them uploads ALL the files each time I publish ... There are no errors showing ... all ok .. but always shows a red page somewhere once published. If I click publish again, it uploads everything and takes over an hour because of the video and media ... any suggestions?

I have 4 sites that I am creating on iweb 08
You're posting in the 09 forum.
To accomplish what you want , you should consider doing this :
Go to :
~/Library/Application Support/iWeb/
where ~ is your Home drectory and duplicate the domain.Sites2 file as many times as neccesssary.
Give each file a descriptive name.
1. Double-click a file to open it in iWeb.
2. Delete the Sites you do not want, leaving the one you do want.
3. Do Save and quit iWeb.
Repeat 1 to 3 with another file.
You can now edit and publish each Site without the others.
For your convenience, drag the folder to the dock. Next time click it and choose the file you want.
For even more convenience, skip the steps above and buy --iWeb-- iLife 09. Then you can publish the Site of your choice independent of the other Sites in the file.
Message was edited by: Wyodor

Need to upload my site to .Mac, but to use a different e-mail address!!!!

iWeb uses my .Mac address by default. But these pages will not be my personal ones. Is there any way, how to get around it?
BTW: someone suggested earlier the for more info to go to iWeb Help and type "hyperlink", but the help is not working!!!!!!! Blank window!!!!!!!!

True.
But my Mail's Spam filter is doing a pretty good job lately. I get around 20 junk mails a day and hardly any shows up in my inbox.
the reason why I wanted to use the generic mail icon was that I do not want to play with the alignment of the mail icon on every single page - the icon is placed in the right lower corner and I don't have to do anything. i don't have tons of time to play with that. yes, a nice gif with the address written in it would be a great solution, but automatize it so it goes into same place every time - pain in the neck.

T43 Need to activate Security Chip after every boot

Hi!
I have a TP T43 - model 2668 K6G. My problem is that I have to activate the Security Chip in the Client Security application (8.20.0023.00). Thus I have to boot and then reboot to get up and running. I use the Password Manager so I need the Security Chip to be activated.
Hope to get help soon :-)
Best regards
/Erik

Security chip is "married" to the board it came with in the first place, and hence not replaceable.
You can safely junk that planar.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

I use Iplanet web server and my question is, once I make changes to my java file, is it necessary to restart the server after every change to the file(java)??

Hi,
In your iWS, Go to particular instance config directory
edit contexts.properties file
(eg:-/usr/netscape/server4/https-test/config/contexts.properties).
Do the below changes.
(uncomment
context.global.reloadInterval=5
"And"
context.global.isModifiedCheckAggressive=true).
Example:-
~~~~~~~~~~~
# Context properties:
# context.global.sessionmgr=com.netscape.server.http.session.SimpleSessionManager
# context.global.sessionmgr.initArgs=
# context.global.initArgs=initial=0
# context.global.realPathFromRequest=false
# context.global.respondCookieVersion=0
# context.global.sessionExpireOnClose=false
# context.global.includeTransparency=true
# context.global.tempDir=/tmp
context.global.reloadInterval=5
# context.global.javaBufferSize=0
# context.global.bufferSize=4096
# context.global.docRoot=/foo/bar
# context.global.inputStreamLengthCheck=true
# context.global.outputStreamFlushTimer=0
# context.global.uri=/
# context.global.host=
# context.global.ip=
# context.global.authdb=default
# context.global.classpath=
# context.global.singleClassLoader=false
# context.global.contentTypeIgnoreFromSSI=true
# context.global.parameterEncoding=utf8
# context.global.sessionCookie=NSES40Session
context.global.isModifiedCheckAggressive=true
I hope this will work for you.
Thanks,
Daks.
Developer Technical Support
Sun Microsystems
http://www.sun.com/developers/support.

Using DW CS6; when uploading a site DW changes all dates to today; how can I upload without changing the file-dates?

Using DW CS6; when uploading a site DW changes all dates to today;
how can I upload the site whilst preserving existing file-dates?
Thanks
Paul

How are you uploading?
I do not see this behavior in DWCS4 or DWCC (I assume nothing changed in DWCS6 and then back for DWCC, but I could be wrong).
However, when I upload, I only select the files I have modified after an initial "Upload Entire Site? Yes/No" prompt. If you aren't selecting specific files to upload, and you're overwriting the files on your server with new copies of your entire local site each time, the mod dates would show as the date/time of your upload.
To select only the files that have changed since your last upload...
1. Right click on your local root folder in the Files window under Local View
2. Go to Select > Newer Local from the context menu
3. Wait until DW is done talking to the server, it could take a while, when it's done, all of the files that have a newer mod date locally than their server counterparts will be selected
4. Click the Put (up arrow) button
For me, this process never changes the dates of files that aren't part of the upload.

Upload web site

I start devoloping a site in my PowerBook using Iweb; the site was published and all worked fine.
But now, that I need to upload the site to my G5 to keep working in it, I am out of luck.
Probably the designers didn't thought that uploading is a must for any web design program, or better yet, there is a way to do that, that I ignore.
If that is the case I'll appreciate any help.
G5 Dual Mac OS X (10.4.4)

in other words if you are working back and forward
from the laptop to the Desktop you got to repeat the
copy procedure from PowerBook to G5 and vice-versa.
Cumbersome, don't you think?
That's right, you must always have the latest version of the Domain file on whichever machine you wish to be working. It is a fundamental aspect of how the program works. Here's a trick that some have found makes this easier.
http://discussions.apple.com/thread.jspa?messageID=1525121#1525121

Do I need to upload entire site after every change?

Similar Messages

Maybe you are looking for