Do I need to use specific printers with Macbook Pro?

Do I need to use specific printers with Mac?

Only those that provide compatible printer drivers.
OS X- Printer and scanner software available for download
OS X Mavericks- Set up a printer

Similar Messages

I have just used air display with macbook pro. i have disconnected now from apple tv. but my laptop screen is still very small like its connected to the tv. this means all the tabs and writing is very small, how do i full disconnect my laptop?

i have just used air display with macbook pro. i have disconnected now from apple tv. but my laptop screen is still very small like its connected to the tv. this means all the tabs and writing is very small. like the display down the bottom where al the applications are, is n the middle of the page and not spread down the bottom. this is seriously annoying! all the writing is every small and the tabs are small and its hard to read. the air display link has disappeared from my computer. but the laptop screen is still very small. i want to know how do i get rid of this and return my macbook screen to its normal size. thank you

Hello chrispyw,
If your content is still being displayed incorrectly, I would check the resolution setting for the built in display with this article:
OS X Yosemite: Adjust your display’s resolution
If it keeps happening whenever you use AirPlay then I would use this section of the following article to reset the display system:
Apple computers: Troubleshooting issues with video on internal or external displays
Reset the system
You can reset the Mac's parameter RAM and SMC.Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
Thank you for using Apple Support Communities.
Regards,
Sterling

HT3986 when i use windows 7 with macbook pro ,the fan work hardly,how do i fix it?

when i use windows 7 with macbook pro ,the fan work hardly,how do i fix it?

Use InputRemapper
This is one or only utility I know, there are I am sure one or two others.
And the weakest link in running Windows on Mac: lack of thermal/SMC fan control to manage air flow and heat!

What display settings do i need to change to use hdmi cable with macbook pro

what display settings do i need to change to what tv and display my macbook pro with hdmi cable connected to computer.

Well, if it's 1080p TV, then go into System Preferences > Displays.
Sometimes you have to click on detect displays & a PreferencePane should appear on each display device for you to change the resolution.
Also decide if you want it mirrored, or extended. And also move the display to the correct position for extended so you are moving the mouse in the direction of the 2nd display being the TV.
Option + F1 = Brings Display preferences up immediately.
Command + F1 or F2 = from memory that's the shortcut to switch back & forth between mirroring & extended.

Possible to use IR Modem with MacBook Pro?

I am a new MacBook Pro owner who travels frequently to a variety of locations.
I am interested to see if I can use a PSION Travel Modem (an IR Modem) as a backup for those instances where WiFi just isn't available.
(Believe me, I will travel to such locations.)
I have used this nifty modem ( http://www.amazon.com/gp/product/B00004RKHF ) with my Palm in the past. I have done quite a bit of searching through Google & this forum, but have not found a specific Psion modem script or a generic IR Modem script to try.
Can anybody point me in a direction to get this working?
Thanks,
Brad

Apple has not included Infrared output on their Macs since 2001. You'd have to find a Mac compatible USB or ExpressCard 34 adapter for Infrared. I don't know if it is possible to reverse engineer the Infrared of the Front Row remote, but that's the only logical means I can think of making it work if it were possible.
I'd get a 56k modem, if you want an alternative to WiFi:
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore?productLearnMore=MA0 34Z/A

Using EarPods Mic with MacBook Pro 17" (2012) - not working

hello,
FYI: computer is the early 2012 MacBook Pro - last of the 17" models. it has the 2 separate jacks... one for audio/mic IN and one for headphone OUT. not combined like in the smaller models.
FYI: using a brand new (early 2013) pair of EarPods that came with a new iPhone 5.
i love using the earpods plugged in to the headphone jack to listen to music whilst working. and i also use it to "listen" when doing video conferencing via Skype, iChat/Messages, & Hangout.
but when i'm in a noisier environment (cafe), it would be nice for the other people i'm talking to to hear be better than what the built-in mic can provide. people tell me they hear me great using the earpods when talking thru my iPhone in the same locations.
so, i thought, okay, i'll just get a Y-splitter/adapter... female input to 2 male outputs. recognizing that the earpods have 3 rings on the mini-jack (2 for stereo headphones & 1 for mic, i presume), i made sure the adapter male ends had at least 2 rings on them. found one at Radio Shack.
but it does not work! :-(
discovered audio output comes thru fine, but the computer doesn't recognize the mic input.
i've gone to System Preferences > Sound > Input...
and changed the selection from "Internal Microphone - Built-in" to "Line In - Audio line-in port" but the level meter just goes dead.
i've done some reading about the MBP only allowing "line level in" vs "mic level in" but i don't know what that means.
can this work? if not, why?
am i just missing some setting somewhere? if so, what?
do i need some different kind of adapter? if so, please point me to one.
THANKS!!!

Good that it was a simple solution. I've had some of the mice lose the BT association and you have to clear out the configs and re-pair the two.

Using external iSight with MacBook Pro crashes iChat

I use my Macbook Pro in clamshell mode with an external display. I bought an external iSight so that I could use iChat AV. I have the appropriate adapter to convert the Firewire 400 cable to Firewire 800 which is compatible with my '09 MBP 17" (2.8GHz).
Every time I connect the iSight, iChat will launch, and then will crash (SPWoD). I can not recover unless I disconnect the iSight, at which point iChat is able to fully launch.
I tired changing both iChat and Photobooth to 32-bit mode (hint from another thread), but that did not help.
As a test, I connected the iSight to an iMac with both FW400 and FW800 and the iSight works perfectly with either connection. iChat AV then allows me to then select which camera I want to use in its preferences.
Both my Macbook Pro and the iMac are on OS X 10.6.2. iChat crashes regardless of if I am using the MacBook Pro in clamshell mode or not.
TIA.

bryanus wrote:
Sorry, I answered with my iPod tough. I guess it didn't translate the way I wanted it to.
Here are my answers ...
Thanks for that info, bryanus
Between this info and your latest response to Ralph, there are so many possibilities that I cannot yet identify the source of your problem. More troubleshooting is needed to identify the cause so we know what to fix.
Your used iSight may be causing the problem. Because it is easiest to troubleshoot, I suggest you test the external iSight next. The following will either eliminate your external iSight as the cause of your problem or let you know whether it will require professional service.
If the testing I suggest below shows that the problem is related to iChat ONLY, stop the testing I suggest and follow Ralph's expert suggestions for troubleshooting and correcting iChat.
Don't worry about the "clamshell mode" issues at this time. Until you get your external iSight working reliably with your MBP, keep the external display disconnected.
Additionally, to eliminate possible network problems as a contributor to your problem, when testing (internet) connected apps like iChat, use the same ethernet connection when you test both Macs. Even use the same ethernet cable (no wireless) connection to all Macs.
Also, to test problems with launching iChat, _disconnect both Macs from the network_ to see if iChat will launch properly with a connected external iSight but no internet or network connection.
You have already done some excellent testing, but you can use the additional suggestions from the following link (including other subject links on that page) to test the remaining user-correctable possibilities:
http://www.ralphjohns.co.uk/EZJim/EZJimpage4.html
Pay particular attention to *possible conflicts*, testing with more than one cable and/or adapter, and testing the external iSight on more than one Mac. If possible, it would be also good to use your same cable and FW Adapter to test your MBP's function with a different and known-good external iSight. If you have no other access to a working external iSight, your local Apple-Authorized Service Provider may be have one that he can use to check your MBP connection.
If your external iSight can connect reliably to other Macs, or if a different, known-working, external iSight also gives trouble on your MBP, the problem must be either in your MBP's physical Firewire connection port or in the software on your MBP.
Unless you find a fix while trying the above, we can offer suggestions for the particular problem(s) you identify based on your troubleshooting, so give as much detail as you can about your findings when you post back.
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

Using Display A1038 with MacBook Pro?

Hi,
I'm getting a new MBP soon and really want to use the A1038 Cinema Display with it. The display uses an ADC connection. What adapters/cables will I need to use the A1038 as an external monitor?
Thanks,
Adam

<http://www.amazon.com/Apple-M8661LL-Display-Adapter-4038234011420/dp/B00011KHT2>
<http://store.apple.com/us/product/MB570Z/B/mini-displayport-to-dvi-adapter>

Using Modem MA034Z with MacBook Pro with Intel Processor

I have just bought the MacBook Pro to replace my old PowerBook G4 but find I no longer have an internal modem (Thanks Apple!! - we dont all send all our time in major metropolises)
I have read a couple of reviews stating the MA034Z apple modem does not work with the Intel processor in the MacBook Pro. Any substantiation?
Can anyone guide me to an external modem that works. I just need simple dial up - no faxing

Welcome to Apple Discussions!
I have the Apple USB Model MA034 external modem which I got when I bought my MBP in September 2007. I have used it for dial up internet ever since, and have had absolutely no issues with it. I use it for dial up both at home and when I travel. It works perfectly.
I find it hard to imagine that Apple would provide a modem that would not work with the MBP. It may be worth reviewing the reviews, and possibly posting a link so that their assertions about the modem can be evaluated.
Good luck!

Using external mouse with Macbook Pro

Hi,
I'm using an external Dell USB keyboard and mouse with my Macbook Pro. They work ok, but there seems to be a bit of 'drag' when I use the mouse. It's difficult to describe, but when I move the mouse slowly the pointer seems to drag, or slip...it's not matching the movement I'm making with the actual mouse. It's not so bad when I make bigger or faster movements, just when I'm using it slowly or precisely.
It's very distracting, and is even making my wrists ache.
Any idea how I can stop this happening - do I need to find a driver to fix the issue?
Thanks for reading.

Are you using an external monitor? The 24" LED Cinema Display?
I saw a post in one of the other forums where several people were having this issue -- they all had external monitors attached, and mostly all 24" LED Apple Displays. The type and make of the mouse seemed to have no relevance, and the issues seem to impact the trackpad as well. It is hard to describe the "feel" and "lagging" effect of this problem.
Nearly all people in the post had the monitor and laptop power adapter plugged into the same outlet/powerstrip. After moving one of the cords to a different outlet, this seemed to solve the problem for nearly everyone. Odd, I know.
I'm gonna try it and I'll keep you posted.

Help after using verify disk with MacBook Pro 2009

Hello, I was running verify disk and got this massage:
This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.
Verifying volume “Macintosh HD”
Performing live verification.
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Missing thread record (id = 932391)
Missing thread record (id = 1020109)
Missing thread record (id = 2003740)
Missing thread record (id = 2587373)
Incorrect number of thread records
Checking multi-linked files.
Checking catalog hierarchy.
Invalid volume file count
(It should be 806588 instead of 806594)
Checking extended attributes file.
Checking multi-linked directories.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD was found corrupt and needs to be repaired.
Error: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.
what dose it mean?
I don´t have my Mac OS X installation disc with me and it is also not possible to buy one here. what can i do?
thank you so much

Boot into single-user mode. After startup is completed you will be in command line mode and should see a prompt with a cursor positioned after it. At the prompt enter the following then press RETURN:
/sbin/fsck -fy
If you receive a message that says "***** FILE SYSTEM WAS MODIFIED *****" then re-run the command until you receive a message that says "** The volume (name_of_volume) appears to be OK." If you re-run the command more than seven times and do not get the OK message, then the drive cannot be repaired this way. If you were successful then enter:
reboot
and press RETURN to restart the computer.
There is no guarantee this will fix the problem. Normally you must boot from another drive in order to repair the startup volume. If you can't use a Snow Leopard DVD then you would need to use some other bootable device like a backup drive or another Mac connected via Firewire - Target Disk Mode.

Can't connect Canon MP560 wirelessly using Airport Extreme with MacBook Pro

My Canon MP560 is failing to connect to the access point. It recognizes the access point/network I would like to connect to but when I enter in my password it fails to connect and tells me to check access point settings. I used this exact same printer but different router in my old house and everything worked well! I'm thinking this is a Mac thing that I can't seem to figure out. I have the lastest Canon driver updates for Mac and use 10.6.8 software on my Macbook Pro.
This is how the printer instructs me on the panel.
a. Select Wireless LAN setup
b. Select Easy Settings
c. Select Access Point
d. Enter Password
e. Fails to connect..........
Please help.
Brice.

Hi Tesserax,
i have the same issue as mountie30 with the MP560 but it's not working
i have a airport express.
i was following your instructions:
''To get to this feature within the AirPort Utility, go to the utility's menu bar and first choose Base Station, and then, Add Wireless Clients...''
the problem is, base station is in light gray and i can't click on it.
i re-plugged my printer into my imac so it detects it again. (it still says printer offline in settings)
i have no clue what to do.
please help
thanks
Nath

Question about using a Projector with MacBook Pro

Sorry if this is the wrong post location, but I figured people here would be the most knowledgeable about the topic.
I'm looking into getting a portable projector for under $450 that will work with my 2009 MacBook Pro for: a) watching instructional videos and b) doing some web surfing and a little programing. I can't get a monitor because I need portability and a picture at least 30" due to some visions issues.
I've looked into a few including the Optoma PK301 (sold at apple) and the Samsung 410ME (higher lumens, but lower res). Most of them have a max resolution of 800x600 and I'm wondering how that will appear on a 30"-45" projection? Will websites wider than 800 pixels be cut off? Does that mean a video with a resolution of 960x540 will be cut off or look funny?
The PK301 has a Native WVGA (854 x 480), but "supports" WXGA (1280 x 800) through VGA adapter; HD (1080i) through HDMI. So how will that render on the wall?
I sincerely appreciate your time and help.

I bought the PK301 becasue it has great reviews. But not on the MAC products... If any mac techs are around... appreciate some help here. Thanks.
Sharon

Using Apple remote with MacBook PRo

How can I manage a PowerPoint presentation on my MacBook Pro using the Apple remote control that came with it?

Are you still using Tiger 10.4? Also what version of PowerPoint? Only '08 and '11 work with the Apple Remote.

Using European Outlets with Macbook Pro

Hello Im about to buy a Macbook Pro and am traveling to New Zealand for a semester abroad. I believe this country uses the same outlet system (and higher voltage) as most European countries. My question is: Is there an adapter sold by apple for converting between American and European outlets? Is any power converter safe to use with my Macbook? Thank you for any information!

Check out:
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=6C0 4E115&nplm=M8794G/B
I believe there were some posts on this a while back. You might search for "power adapter" or something like that. There are also some user reviews from the Apple store concerning the product above.
MBP C2D 2.33 Mac OS X (10.4.9)

Do I need to use specific printers with Macbook Pro?

Similar Messages

Maybe you are looking for