Do I need to wait for update?

A friend of mine gave me this iPad 2 long time ago and it is a iOS 4. I barely use the iPad. So today I wanted to install games such as pvz2 but it said it need iOS 5 or more. When I went to my MacBook to update it. And I click "check for updates" all it say is "This model is iOS 4" I kept on clicking it but when I read the word below it. It say iTunes will check for updates in 12/12/2013 so I did in the next day but it also say the same thing as previous day and it say iTunes will check for updates in 19/12/2013. And the problem is should I wait?

this is what it say

Similar Messages

I have an ipad 4 running ios 7 but i noticed ios 7 on my ipad seems laggy. I already did a factory reset but it seems doesn't change a bit. Are there any solution for this or I need to wait for the next ios 7 update?

Am I the only one who facing this problem or there someone else. I did a factory reset yesterday but it still laggy. Do I need to wait for the next ios 7 update or what?

Hi Amish,
I should have mentioned that I have signed out of the iCloud Control Panel several times and no syncing occurs.
Thanks for your response anyway. I appreciate your feedback.

HT201209 How to get an itunes gift card code, no need to wait for shipping

Good day to all,
I want to get an itunes gift card just to download whatsapp on my iphone 3gs. I have my credit card but the billing address is in Haiti, unfortunately Haiti is not in your list of countries. How can I get itunes gift card code immediately in order to download that application? No need to wait for shipping, just want to have the code to add it to my apple account.
If you have a better solution, it's welcome.
Thank you in advance for your reply

Sorry, but you can't, if you live in Haiti. As you say yourself, there is no iTunes Store for Haiti and you are not allowed to use the iTunes Store of any other country.
If you live in a country where there is an iTunes Store, check to see if Apple sells physical gift cards in your country and if so purchase and redeem one of those. There is no way to purchase an electronic gift certificate from Apple without a credit card from the country whose iTunes Store you wish to use.
Regards.

I updated my ipod touch, then a while later it said waiting for update then shut off. then started turning on and off, what do i do ?

I updated my ipod touch, then a while later it said waiting for update then shut off. then started turning on and off, what do i do ?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

If I click 'clear now' in 'offline storage', do I need to wait for an acknowledgement that it has cleared or does it clear instantly?

Lately, Firefox will not let me reply, forward, or open 'action' when in AOL mail. AOL works fine on Safari. Do I need to clear cache? If so, do I need to wait for an acknowledgment that the cache has cleared before moving from that screen?

You do not get any acknowledgment if you click Clear Now to clear the cache. It will be done and shouldn't take much time. You can check the about:cache page via the location bar to see if it has worked if you want to be sure.

How LONG I'll need to wait for Apple GENIUS fix the incompatibility

I need to work....How LONG I'll need to wait for Apple GENIUS fix the incompatibility # KEYNOTE and LION???
What is the best thing I've to do???
Downgrade the OS??? Change the Plataform????

Each region has little differences that need to be changed and setup in order for it to work on your phone correctly. Just need to sit and wait...
Nokia 5800 XpressMusic Red V52.0.007
Hit the Kudos if I helped!

I can't sync my files-when I click sync and need to wait for a while but then nothing happened, not even error notification

I can't sync my files-when I click sync and need to wait for a while but then nothing happened, not even error notification

File Sync Links that may help
-http://helpx.adobe.com/creative-cloud/kb/arent-my-files-syncing.html
-http://helpx.adobe.com/creative-cloud/kb/cannot-share-certain-types-files.html
-Size Limits https://forums.adobe.com/thread/1488242

Retraction "Wait for Update" Setting

Trying to find out what 'wait for update' option does?
This is a setting for a cca primary cost retraction in the parameter group.
Also, have a customer who says that retraction dropped a cost element? Any comments?
Thanks
Tim

It appears that the call is getting hung up on the following url:
/webdynpro/resources/sap.com/tcwddispwda/global/SSR/themes/sap_tradeshow/ur/ur_pop_ie6.css
Does anyone know anything about this?
Thank you

UWL - Waiting for update message

Hi,
Can someone explain me what's the reason that UWL shows a 'Waiting for update' info message on top when opening UWL ? Until we press refresh-button the uwl seems to reload every 15 seconds. If we press Refresh button the 'waiting for update' message disappears ...
What does the message mean ? For which update is the system waiting ? Why does it show up every time the UWL is called ?
Regards,
Igor

When the UWL first appears it shows any entries in the UWL cache. The waiting for update appears whilst it is trying to connect and retrieve items from the backend systems.
As default it should then reload every 5 minutes.. unless someone has changed the configuration on your system.
Paul

UWL - waiting for update

Hi All,
How we can eliminate that message ? When we refresh it the new item is appearing in Tasks .
Can we make it as auto refresh ? So that the waiting for update message can be eliminated and the new task can be seen when the user logins in .
If we leave the screen for around 15 seconds , then also it is automatically going to tasks , where we can change the UWL refreshing automatic time ?
Thanks,
surya
Edited by: surya on Aug 5, 2009 2:45 PM

Hi Surya,
First of all talking about having the latest tasks as soon as a user logs in Portal, as per my understanding, this is not possible. There will be some time delay always (as per the default/custom configurations).
Secondly, regarding changing the UWL automatic refresh time, please try the options below:
1) Change the Delta Pull Channel Refresh Period. For doing this, go to System Administration -> System Configuration -> Universal Worklist & Workflow->Universal Worklist Administration. Select the appropriate system and click on Edit button. Now change the time in Delta Pull Channel Refresh Period (in Seconds) as per your requirement.
For more details, see:
Universal Worklist refresh delay - Reduce default time
2) In your Universal Worklist page, expand the menu on the top right hand corner (from where you refresh the tasks) and select Personalize View. Now under Data Properties, change the value under Page Refresh Rate.
I hope you are able to solve your problem to some extent.
Bye
Ankur

I updated to ios 7 and now the battery does not stop charging any ideas, or have to wait for update? thanks

i updated to ios 7 and now the battery does not stop charging any ideas, or have to wait for update? thanks

To show the battery percentage used go to settings
from there click general scroll to usage and select
scroll to bottom of page for battery usage select on.
This will show the icon battery and the percent numbers on the top right.
When phone is connected to an outlet sometimes it does not always show complete charge. I do not understand why but it is what it is.
FYI I sent reply to you not to deggie. You can have your own satisfaction to reply direct.

EPMA 11.1.2 Essbase Hangs at status waiting for Update

I know that in 11.1.1.3 there were issues deploying an essbase cube from EPMA, 11.1.2 however claims to be able to do this, but I am having a problem getting the cube deployed.
I am on 64-Bit Windows 2008, all hyperion products are version 11.1.2 with SQL backend.
I can validate a simple cube just fine from EPMA.
I can create cubes in EAS.
I however cannot deploy a simple cube from EPMA. I have checked all conditions on permissions and followed the guidelines.
The essbase application is registering to Shared Services (thus I can make sure the permissions are Provisioned).
The system gets stuck at "Waiting for Status Update..." it will remain at that level (50%) without ever updating. I have changed the awproperties file to time out after 45 minutes. I am not seeing any errors recorded in any of the logs to indicate what problem is going on.
I need some suggestions as to where to look to force some form of error logs that will give me some clue to the next errors I need to deal with. Or some advice from anyone that has experienced this issue. This is an essbase cube not a planning application. I have EPMA HFM Applications, as well as FCM, FDM deployed on the same foundation without issue.
The only issue I can find close to this is a Planning deploy with problems about JVM size but nothing about Essbase application JVMs.
Any ideas?

Is this an essbase only application? It seems like the property is defaulting to stored and then flipping the initial stored member to shared because Essbase isn't interpreting the deployment correctly. I would try using ShareData as the datastorage property (I think that is the correct spelling). Also, I believe the correct way to set IsPrimary is Y/N and not 0/1.
If that did not work I would try the following in this order:
1 - I would first extract the dimension in question using the file generator and confirm that the properties are indeed correct.
2 - If they were correct. I would toggle the dimension from shared->local->shared. EPMA is still a little nutty and this will fix a fair amount of issues as it will 'refresh' the application's version of the dimension. I would then deploy
3 - deploy from EPMA->Planning only (no essbase creation), then deploy to essbase separately after ensuring the property represents itself in planning. If it is essbase only - create the outlnie instead of refresh.
4 - create a duplicate app in EPMA and deploy the copy of the app - and see if it has the same problem
Try that and see how it goes.

Should I buy an Imac now or wait for update late 2014

I'm thinking of getting an Imac 27" (i7 , 8ram, 3tb fusion drive and 780 gcard) "fully loaded"
Il be using it for FCX and some photoshop. Burning blu rays
Beginner editing, (home movies,) and plan on taking some classes in future and do bigger editing projects.
should I pull the trigger and buy this imac, or wait for the update in mid to late 2014???
Thanks ahead of time to anyone taking the time to responding :)

if you need a new one now, get one. If you can wait, then wait. No matter what, it will be soon "outdated" anyway. Also, no one knows when a new mac will be released until apple say so. anything else is speculation.

Need BAPI/RFC for Updating Category field of CRM_DNO_MONITOR from SAP R/3.

Hi SAP GURUS!!
I need to have a new field category in "Create support message" of the HELP menu in SAP server. This field values needs tobe updated with that of Category in Solution Manager ( CRM_DNO_MONITOR) .We have found a BADI (SBCOS001 ) where we designed the screen for having the new field. FOr updating the value of this field to sol man, is there any bapi or rfc ..
Thanks in Advance,
gopa.

Hi
Please check the following points.
1. Please check the settings that you maintained in the table CRMSUBTAB in ECC. You need to have an entry as follows:
User: CRM
Object: VENDOR_MAIN
U/D : DOWNLOAD
Object Class: VEND ( & not BUPA for this entry)
Function Module: PI_BP_VENDOR_MAIN_EXTRACT
The other entry (for upload) has similar but different values. (Refer to the OSS note 883162.)
2. Check if you have applied any filter settings in CRM for the adapter object VENDOR_MAIN.
Regards,
Srini.

Call unix script within Servlet - need to wait for completetion

Hi,
I have a servlet which grabs some information from my web form and then calls a unix script.
This already works fine and does what i need it to do. I now need to add some functionality where i can get the servlet to wait for the unix script to complete before carrying on and then redirecting back to the user.
the code i have for the current servlet is:
         * EXECUTE THE UNIX COMMAND.
        Runtime   oRuntime =     Runtime.getRuntime();
        Process   oProcess   =     null;
        String[]      cmd          =     {"/bin/sh", "-c", sPath}; // UNIX
         * ERROR CODES 3 = File not found
        try
          oProcess = oRuntime.exec(cmd);
        catch(Throwable t)
          t.printStackTrace();
        }I am assuming i need some sort of wait method to handle this. Any help would be greatly appreciated.
Thanks
Graham

ok.. you code is fine.. you can run any shell script or program using the exec() method. if you need to wait till the process finishes then you need to call the method waitFor() in class Process.. the method blocks the parent thread (servlet) till the sub process (your exec'd script or program) terminates.
hope that solves your problem.. :-)
Pls tell me one more thing.. are you using netBeans or Eclipse for executing the programs or you use standalone tomcat to deploy the application. I have problem in execing programs when i deploy in tomcat 5.5 and the same application works fine in netBeans 5.0. if you know pls help me too..
Thanks,
-- abdel Olakara.

Do I need to wait for update?

Similar Messages

Maybe you are looking for