Do i need Windows Server 2012 CAL's if only accessing the Exchange Server?

I am about to implement a deticated Exchange 2013 enterprise server, with windows 2012 server its going to be a central server for 250 users, this means the server is on a central location and users are connecting remotely to this server.
The clients will only be accessing trough outlook , i understand i need 250 Exchange 2013 User CAL's, but do i also need need Windows Server 2012 CAL's ?
thanks in advance !

Hi Jan,
For license question, I would suggest you make a phone call to Microsoft directly:
In the United States, call (800) 426-9400.
In Canada, call (877) 568-2495.
http://office.microsoft.com/en-us/exchange/exchange-server-licensing-licensing-overview-FX103746915.aspx
Frank Wang
TechNet Community Support

Similar Messages

My hard disk crashed and I cannot find out how to "contact customer service" other than this forum. The website seems to just take me in a circle. I need to de-activate a license but cannot access the software due to a crashed hard drive. Please help.

My hard disk crashed and I cannot find out how to "contact customer service" other than this forum. The website seems to just take me in a circle. I need to de-activate a license but cannot access the software due to a crashed hard drive. Please help.

Hi Anthony ,
Here is the link to connect with Adobe Chat Support.
https://helpx.adobe.com/adobe-connect/kb/connect-chat-support.html
Hope your query gets resolved .
Regards
Sukrit Dhingra

If i create a partition for Windows 7, and boot up in Windows using Boot Camp, can I still access the files from the Mac partition (Photo's Music etc.)

If i create a partition for Windows 7, and boot up in Windows using Boot Camp, can I still access the files from the Mac partition (Photo's Music etc.)

JDFitch wrote:
Ok Great,
Will installing Boot Camp drivers allow me to both read and write to the OS X Volume from windows?
This is important as if it will it means i can make the windows partition a lot smaller and keep all my files on the OS X partition which would be preferable.
Jon
No, OSX will be read only (from Windows) and vice versa. (you can install 3rd party utilities on either or both partitions, to make read/write possible)

TS3798 I get this error message"your operation could not be completed" I need help figuring out why I can not access the web page.

I get this error message"your operation could not be completed" I need help figuring out why I can not access the web page.

amarilysfl wrote:
"Your disk could not be partitioned. An error occurred while partitioning the disk".
https://www.apple.com/support/bootcamp/
If you were using Apple's BootCamp and received this message, quit it and open Disk Uility in your Applicaitons/Utilities folder.
Select the Macintosh HD partition on the left and select Erase and Erase Free Space > Zero option and let it complete (important) this will check the spare space for bad sectors that can cause issues formatting partitions.
Once it's completed, try creating a partiton again in BootCamp.
If that doesn't work, then hold command option r keys down while connected to a fast internet connection, Internet Recovery should load (spinning globe) and then in that Disk Utility, select your entire internal drive and click > First Aid > Repair Disk and Permissions.
reboot and attempt Bootcamp again.
If you still get a error, it might be that you have OS X data on the bottom area where BootCamp partition needs to go. This would occur if you had the drive or computer for a long time or wrote a large amount of files to the drive and nearly filling it up and then reduced some, but it left traces in the area BootCamp needs to go.
To fix this
BootCamp: "This disc can not be partitioned/impossible to move files."
How to safely defrag a Mac's hard drive

HT1766 how to restore older backups? I can only access the latest backup but I need the one before that.

How to restore older backups? I can only access the latest backup but I need the one before that.

You would only have that backup if you saved it somewhere.
Itunes only keeps the latest one.

HT201413 i am using windows xp pro on a laptop, i access the internet thru a wireless connection, no problems. i start itunes and it will not connect to the internet

i am using windows xp pro on a laptop and have never had a problem accessing the internet, and still dont.
i purchased an iphone 4 and would like to sink it with my laptop, i installed itune 10.6 and it (itune) will not connest to the internet.
this can not be a hard problem to solve, but i need help
thanks

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Can't boot into Windows 8 Single Language 64 bit or access the BIOS screen with the F1 key

I have in my possession right now a Lenovo E49, Model name: 3464
I am unable to access the BIOS settings at POST by pressing the F1 key. Neither does it respond to the Enter key when it displays the message "To interrupt normal startup, Press Enter". I am also unable to boot into the installed OS Windows 8 Single Language 64 bit.
For your informtion, these are the events that led to this issue.
I accessed the BIOS settings at startup using the CHANGE PC SETTINGS option in the CHARMS menu in Windows 8 Single Languge 64 bit followed by GENERAL and ADVANCED STARTUP. Then I chose Restart Now. Windows restarted to produce the startup screen where I chose Troubleshoot, followed by Advanced Options and UEFI Firmware Settings, followed by Restart. This took me to the BIOS settings screen. Once there I changed the boot settings in BIOS so that SECURE BOOT was turnned OFF. It was in ON state prior to that. I also changed the BOOT MODE to LEGACY ONLY. I also changed the BOOT ORDER to boot from DVD drive first followed by the Hard Disk and USB Hard Disk. I saved the changes by pressing F10.
Now the computer is able to boot from the DVD Drive. I tested this by inserting a Windows 7 Repair DVD and also a Linux Live DVD. Mind you, I didn't mke any changes to the Hard Drive. I'm also able to boot from a USB Hard Disk. This too was tested by inserting a bootable USB HD that had both Windows 7 and Windows 8 OS installers. I used only the command prompt feature in the Repair option on the Windows 8 installer to ensure that I could access the partitions on the HD. I did not in any way install Windows 7 or 8 on the HD.
If there is no bootable DVD or USB HD inserted, the laptop is involved in a loop that restarts followed by a message that says the following:
"Intel Undi, PXE-2.1 (build 083)
Copyright (C) 1997-2000 Intel Corporation
This product is covered by one or more of the following patents:
US5, 307, 459, US5, 434, 872, US5, 732, 094, US6, 570, 884, US6, 115, 776 and US6, 327, 625
Realtek PCIe GBE Family Controller Series v2.41 (06/08/11)
PXE-E61: Media test failure, check cable
PXE-M0F: Exiting PXE ROM."
I am positive that the current state of the BIOS is such that it does not accept any input keys like F1 and F12 at POST so that the BIOS can only be accessed through Change PC Settings in Windows 8 as I had done prior to the occurence of the issue. Since I cannot boot up Windows 8 I cannot use this method to access the BIOS. And since it is not possible at this stage to access the BIOS settings through the F1 key, I believe Lenovo must have surely provided another alternative to enter the BIOS. Can you kindly tell me what other way is there to do this. In earlier days, one could reset the BIOS by shorting the BIOS through pins on the motherboard. Is that possible now? Or is there some Lenovo BIOS utilily that enables me to change the BIOS setting to boot with Legacy and UEFI? Or do I have to install Windows 8.1 64 bit in Legacy mode?

I'll see if another member of the team can jump in here and offer more help...
What I might imagine is that you can only access BIOS from a cold boot. Windows 8/8.1 have hybrid shutdown and don't completely shut down the machine normally, so even when it powers off, it isn't fully off and the next boot is not really a cold boot.
Please see this KB. I realize this assumes you can get into windows.
As you suggest, it also seems as though you have set legacy vs UEFI and that may be why your drive is not currently booting. Can you remove the battery on your system? If not, is there a reset hole on the bottom? Removing battery and AC and pressing and holding the power button several times, then re-attach AC and Battery and try to restart and press F1 to get into BIOS. (Not familiar with models that use enter for BIOS).
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Do co-authors need to have an adobe cc account to access the form?

I have an Adobe CC account. I created a survey form from a template, and added 3 co-authors.
Does each one need to have a CC subscription too?
Do my recipients need to LOG IN to fill out this form once I have distributed it?
Are the recipients of the form able to:
- see the survey results
- change/recall their survey answers
- see other respondents' answers
- download the survey form
- reply to the survey more than once
- begin the survey and save work in progress, then come back to finish it later
- print the survey
- forward the survey form to some other email recipient
- access the survey they completed once they have hit 'Submit'
If I start editing a survey form on my desktop Forms Central App, can I finish editing it online and vice -versa?
What is the best practice in creating a form; desktop app, web app, or no difference?
Do survey recipients see a preview of the survey form in theie email inBox?
Thanks for all your help with my questions.
NH

from what ive experienced, you do not need a schema..(i seriously do not know what is the use of a schema!!) when i created my first (& last) dynamic form, the problem with it was i hadn't saved it as a dynamic form before testing! other things:
- the dynamic part of the form must be a repeating subform
- the script you use to add a button calls the right part of the form according to its location in the hierarchy
don't know if thats any help at all

Using Windows w/ BootCamp doesnt allow me to access the internet on Windows

I can access the internet when on the Mac side, but I cant access the internet on the Windows side. I called my internet service provider, and they were no help. I am pretty new to Mac computers, so if you can help in lamens terms, that'd be great.

Your question is probably better asked in the Boot Camp forums:
http://discussions.apple.com/category.jspa?categoryID=237

What does one do when they get "secure link to itunes store has failed." got this while doing diagnostics test. clicked on help but just got a blank white window. original problem stems from inability to access the itunes store.

I got "secure link to itunes store failed" during a diagnostic test. unable to access itunes store and nothing i do works.

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Need to show total of condition result only not the detail

Hi,
I've created a query to report the number of shopping carts with a value over $1000 for a given period of time. I included the shopping cart and its value in the query but do not display them. Then I created a condition to keep only those > $1000. I get the correct result but too many rows, basically one for each shopping cart that meets the condition - I want to report only the result line (total) only per period.
Any ideas?
Thanks
Suzanne

Often when using Conditions, you need to change the Results properties to Summation, so that it sums and displays just the rows that have satisfied the condition(s). Without the Summation option, the Result row totals are for all the detail rows, including the rows that are not displayed because they meet the conditions(s).
Sounds like in this case you would need to add VB code to the workbook to suppress the detail rows and just display the Result rows. Don't have an alternative if you are trying to do this on the web.

Using windows 7 itunes closes when trying to access the online store?

I'm running windows 7 and every time I try to open the online store it says it has a problem and closes. I've tried reinstalling and it still doesn't work????

entered "netsh winsock reset" in command prompt which did seem to fix the 100% CPU usage atleast for the moment.
Are any LSPs (other than Bonjour) appearing in the Winsock providers tab in Autoruns?
Apple software on Windows: May see performance issues and blank iTunes Store
If so, what are their names?

I called apple tech support cause my iphone 5 charger just stopped working. Aplle tech support said they can send me a new charger but why do they need credit card information if i have only had the the charger for 2 months and i have 1 year warranty?

I called apple support because my iphone 5 charger stopped working and they said they would send me a new charger but why do they need credit card information if every apple product has 1 year warranty?

Hi CryyCorr33
Sound like they did what is called an express replacment. What apple does is they put a hold on your Credit Card for the amount of the cord because they are sending you the cord first. Then, once you receive the new cord in about 2-3 days, you'll put the defective cord in the box and ship it back out and when they receieve the defective one, they'll be able to remove that hold from you card.
I believe the reason behind the hold on your card is incase you don't return your defective one to them so they can find out the cause of the issue.
An Apple Retail Store could swap them out for you in store incase you happen to be near one. This requires no hold.
Hope this helps

Iphone 3gs, i0s6 upgrade, not recognising phone on itunes, stating need to reset to factory setting, but cant access the phone because of upgrade. Can anyone help

After upgrade asking meto connect to itunes, but it wont recognise the phone and telling me that I need to reset the phone to factory settings, but cannot get passed the upgrade telling me to connect to itunes to be able to reset the phone to factory settings, can anyone help

Is the phone not working?
Update Itunes to latest version,
Put phone in DFU mode and let it restore.
http://www.iclarified.com/entry/index.php?enid=1034

Web server only accessing the default web folder.

I have the web folder for my domain specified in the web folder on my server as: /Library/WebServer/Documents/whp/
But when I enter the domain in a web browser, it goes to the home page in the /Library/WebServer/Documents/ instead.
The IP address is set to any and the port is 80.
Any idea what I am doing wrong?
Mac Book Pro Mac OS X (10.4.8)

The website name you're typing into your web browser must exactly match either the domain name you have entered in Server Admin for the site, or an alias (under "Aliases"). So, for example, "example.com" and "www.example.com" do not match.
MacBook Pro Mac OS X (10.4.8)

Do i need Windows Server 2012 CAL's if only accessing the Exchange Server?

Similar Messages

Maybe you are looking for