Do i now have access to fibre optic?

can i just confirm that my house can access fibre optic because it is saying i can on the bt broadband availability checker.

You deleted the checker result but you need to take care as that is the 'A' value but it could as easily be the impacted 'B' value 80/69.7. Or somewhere inbetween
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Similar Messages

Do NI have a PXIe Fibre Optic Power Meter to measure loss (attenuation) and output power from a Fibre Optic cable

Hi, I want to be able to measure the loss in a Fibre Optic cable at a wavelength of 650nm, is there any PXIe cards that can perform this function
Thanks

Hi Paul_byrne,
There is no specific NI PXIe card which measures the power output of optical fibres. However the task can be accomplished using an Optical Sensor and a DAQ Board. Here is a white paper which provides an example of the hardware components and setup:
Lowering the Cost of Optical Power Measurements
ttp://www.ni.com/white-paper/3611/en/#toc2
hope this helps,
Kind regards,
James V.
NI UK Applications Engineer

You now have access to all Android apps on your Me...

OpenMobile’s ACL should now be your go-to for apps on your MeeGo device. ACL stands for Application Compatibility Layer and it leverages both the runtime environment and the Dalvik Virtual Machine used by Android to allow support for 100% of the Android Market’s apps.
Link to GSMArena article.
http://blog.gsmarena.com/want-access-to-250-000-android-apps-on-your-meego-device-now-you-do-video/
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Hello John_Clark
Excellent contribution.
Valuable information for all who want to upgrade and not wait until the update is releasedby our operator.
It would also make a good listing of operators which has released 10.2.1
And which have not yet released.
Regards.
BBM Channels PIN: C0007093A
Do not forget to give LIKE Those people who help you and advise you about your doubts. if the review has been SOLVED** # 4LL #ÉliteRoad Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I

My password protected phone was stolen and hacked into. How can I prevent someone like this from hacking into/getting around the passcode? They now have access to everything on my phone (I had a passcode to prevent this)

How can you prevent a hacker from bypassing your iphone passcode? My phone was stolen and someone hacked in and has access to everything on my phone and turned off "find my iphone." This is exactly what I wanted to prevent from happening and the reason why I had a passcode.

Turn on "Erase Data" in Settings>Passcode. That will wipe the data after 10 incorrect password attempts.
Turn off "Simple Passcode" in the same place and use something other than a 4 digit pin as your passcode.
Also make sure Find my iPhone is enabled so you can locate and if necessary, forcibly wipe the phone.

Fibre optic. worse decision I have ever made

I have been on fibre optic now since may. Worse decision ever. Constant connection dropping and also speed slows down regular. Phoned BTa few times. They do a speed test and say all is fine. Well yes it is fine sometimes. Also remote help from bt. He changed channel for wireless and said give it 24 hours and all should be OK. I am running my PCs via ethernet. When will they finally realise that the hubs are prob no good? After searching I was shocked at the amount of ppl with same problem. . phoning bt is useless. They Just assume all is ok as passes speed test. No time for calling them again. I am going to contact ofcom regarding poor service and cancel my contract with no payment owing!

BT BROADBAND AVAILABILITY CHECKER
Telephone Number on Exchange BARTON ON HUMBER is served by Cabinet 12
Featured ProductsDownstream Line Rate(Mbps)Upstream Line Rate(Mbps)Downstream Range(Mbps)Availability Date High Low High Low
FTTC Range A (Clean)
69.5
52.5
20
14.9
Available
FTTC Range B (Impacted)
60
35
20
10
Available
WBC ADSL 2+
Up to 15
8.5 to 19
Available
WBC ADSL 2+ Annex M
Up to 15
Up to 1.5
8.5 to 19
Available
ADSL Max
Up to 7
6 to 8
Available
WBC Fixed Rate
2
Available
Fixed Rate
2
Available
Other Offerings
Fibre Multicast
Available
Copper Multicast
Available
For all ADSL and WBC Fibre to the Cabinet (FTTC) services, the stable line rate will be determined during the first 10 days of service usage.
For FTTC Ranges A and B, the term "Clean" relates to a line which is free from any wiring issues (e.g. Bridge Taps) and/or Copper line conditions, and the term "Impacted" relates to a line which may have wiring issues (e.g. Bridge Taps) and/or Copper line conditions.
Throughput/download speeds will be less than line rates and can be affected by a number of factors within and external to BT's network, Communication Providers' networks and within customer premises.
The Stop Sale date for Datastream is from 30-Jun-2012; the Formal Retirement date for Datastream is from 30-Jun-2014. The Stop Sale date for IPstream is from 31-Dec-2012; the Formal Retirement date for IPstream is from 30-Jun-2014.
If the End User wishes to migrate from their current Broadband supplier they will need to contact them in the first instance to obtain a MAC (Migrations Authorisation) Code, and then contact their new Broadband supplier to arrange for the service to be migrated.
Note: If you decide to place an order for a WBC fibre product, an appointment may be required for an engineer to visit the end user's premises to supply the service.Please note that postcode and address check results are indicative only. Most accurate results can be obtained from a telephone number check.
Thank you for your interest.

Can I have access to Standard Users accounts if I am an Administrator?

I run a department with 4 Mac minis. Before today they all had a generic user and a common password. Using ARD I could access all of them at any time.
Its been determined that we need to set up individual users on these machines. If the individual user changes his password, I no longer have access to the machine.
All of the users are set up as Standard Users
I have an Administrator user on every machine.
Is there a way I can open my Admin user while they are logged in? Even in Curtain mode?
Is there a way, I can see and control their desktop without their password.
I need to install, update and make changes to software on these machines, but I want them to have passwords so they can keep their private company email on there.
Any suggestions?
Im running OS 10.9
The other macs are running 10.6.8
all ARD versions are 3.5.4

Nevermind! I fixed my own problem.
Delete the computers in ARD "All Computers" (take note of the IP addresses first)
Go to the scanner and search for the IP address.
log in with the Administrator UN & PW.
You now have access.

Openreach have laid fibre-optic cable in front of ...

Fibre optic cable has just been laid in front of my property to take high speed broadband to the adjacent business park, so when will I be able to access Infinity broadband myself? Postcode is GU35 9JA. I have looked online but no future
connection has been flagged up. Why?

Hi @philaman
Your cabinet 21 on the BORDON exchange is located here: https://www.google.co.uk/maps/@51.118744,-0.876742,3a,89.7y,204.72h,81.6t/data=!3m4!1e1!3m2!1sMcbCrL...
However it looks like your area is in Wave 2 of the Hampshire Superfast Broadband Programme which is estimated to run from 2016-2018
From http://www.hampshiresuperfastbroadband.com/
"Wave 2. This postcode is included in Wave 2 which will extend superfast broadband coverage to 96% of properties across Hampshire.
Once Wave 1 and Wave 2 have been completed an additional 97,000 premises will have access to superfast broadband, in total more than 570,000 homes and businesses across Hampshire will have access to superfast broadband.
There is a lot of detailed planning to undertake and we expect to publish more news regarding timescales for the rollout of Wave 2 from September 2015.
The programme is committed to seeking additional support to extend coverage even further and address the hardest to reach premises in the remaining 4%. We will publish details regarding these plans as soon as they become available.
Please note: This does not guarantee that every premise in the postcode will be able to access superfast broadband. In some cases, a few properties might be too far away from the new equipment to benefit. - See more at: http://www.hampshiresuperfastbroadband.com/#sthash.KeieUZz0.dpuf
jac_95 | BT.com Help Site | BT Service Status
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Try a Search
See if someone in the community had the same problem and how they got it resolved.

I have been using my husband's apple id in my old PC. When I purchased a MacBook Pro, I created my own. Because I wanted to have access to my old purchases, I changed my husband's original ID's e-mail address to my e-mail address. Now I can't update s/w.

I have been using my husband's apple id in my old PC (ID A). When I purchased a MacBook Pro, I created my own Apple ID (ID B) and started using my laptop and updating the S/W with this ID.
Because I wanted to have access to my old purchases, I changed my Apple ID's e-mail to another e-mail that my husband uses (ID B->ID C).
Then I changed my husband's original Apple ID's e-mail address to my own e-mail address (ID A->ID B).
Now I can't update any s/w through the Apple Store and I get the message that "Sign in to **********@hotmail.com to update applications for that account.". The e-mail address is ID C. How can I associate my laptop in the AppStore with ID B which is the one that have all my purchased applications and contains my own e-mail address?
I would appreciate your reply.
Dimitra

You are trying to find a loophole to circumvent a basic rule that prohibits the transfer of purchased content from one Apple ID to another.
Content tied to an Apple ID are bound to that Apple ID forever. You can not merge or trade accounts. Well, not (officially) anyway...

I gave my old MacBook Pro away and no longer have access to it. I didn't think to deauthorize it first. I DO NOT want it to have access to all music in my iCloud or any music that may have been downloaded sinceI gave away the computer. It now belongs to m

I gave my old MacBook Pro away and no longer have access to it. I didn't think to deauthorize it first. I DO NOT want it to have access to all music in my iCloud or any music that may have been downloaded sinceI gave away the computer. It now belongs to my teenage daughter,who has since been in my WI-FI area and knows that code. I had EVERYTHING removed from the computer before I gave it to her (long story), but since I hadn't deauthorized the Mac,I'm assuming even without the itunes password the iCloud material would had loaded onto her computer.My iCloud had somehow included personal voice mails under Unknown Artist that I did not want on there or shared. How can I deauthorize the Mac Laptop without having the machine available to do it on? Change the iTunes/iCloud password? I should now have my desktop computer, new PC (Aspire) laptop,Ipod Touch, and if possible my Evo 3D as well as my boyfriend's Samsung smartphone being able to access the iCloud account/library--whatever it is called. HELP

Thanks, I appreciate the help. I think this is one of the problems Apple is creating by changing the OS so often. I had fomer colleagues at [a major aerospace contractor] who told me that so many original files were ultimately lost because of the deadly change in the "Save As" operation that they are now afraid of every OS update. Apple has badly damaged their support base with that very prominent company (they won't update now until they've fully examined and understand changes in the pre-conditioned nature of OS computer functions), and they are a whole lot less enthaled with Mac-related equipment/software. Can't blame them, I too used orginal files that way (as easy-to-use templates), and lost some important files before I realized what was happening (to late to revert). Companies should not have to retrain employees each time an OS gets an update, it's can be very expensive several different ways. They learned a painful lesson with that one. And because I'm now retired and don't use multiple devices, I need iCloud like I need a hole in the head... but I'm told there's no way to keep Apple out of my computer. Fortunately, because of major problems when initially installing Mountain Lion, one hold-over of the hardware/software damage I experienced was that iCloud can no longer access my computer even though everything else is working fine again. That was the only "good luck" I had as a result of that expensive nightmare.

Installed mavericks server and now some users don't have access to folders!? Why and how do I fix it???

I have just upgraded the server and os to mavericks and now users that used to be able to open and save or even log in are now locked out with the server saying wrong password. I reset their password and still nothing. I created a new user and they can't even log in? Why now? And how do I fix this. It seems that some users and groups now don't have access and all that was done was to let the group open a shared folder that they have access before. I reset everything and am now very frustrated!!!

Hi
Seem to be an issue with Maverick
After trying to solve the issue with all tips i found here and on the net
I decided to go back to Mountain Lion for my server using TimeMachine backup, and stay with Maverick for my imacs
Work well again
Until Apple will communicate on it or deliver a patch, i would suggest to do the same

A family member recently downloaded an iBook on my device using their apple I'd. Now I don't have access to the material I've purchased using my apple I'd for 90 days! So frustrated! Any tips?

A family member recently downloaded an iBook on my device using their apple I'd. Now I don't have access to the material I've purchased using my apple I'd for 90 days! So frustrated! Any tips? ITunes won't allow me to download the books I've paid for!!

That wasn't something that I was aware of, but looking at this http://support.apple.com/kb/HT4627 I'm not sure that there is much you can do about the device itself. I'm also not sure whether it only affects downloading directly on the device itself or whether you can connect the iPad to your computer and sync content across to it from your account that way - or even whether restoring back to factory defaults on the iPad will bypass the 90 days

HT204053 Our family has several apple devices, iPad, touch, and now iMac, our original iTunes are all under a different apple id. do we keep our own accounts even in cloud? do we all have access to each others media? (First time out with all this..)

Our family has several apple devices, iPad, touch, and now iMac, our original iTunes are all under a different apple id. do we keep our own accounts even in cloud? do we all have access to each others media? (First time out with all this..)

There is no problem about using one ID for iTunes, iTunes in the Cloud and iTunes Match, and another for iCloud and its email and syncing facilities. This way you can all use the same iTunes account but have separate emails and calendars etc.

I have 2 apple ID's and one I could not access that had $15 and for some reason it made me create a new apple id, I now have $25 on both accounts. how do I take the money and put it on one account?

I have 2 apple ID's and one I could not access that had $15 and for some reason it made me create a new apple id, I now have $25 on the new account. How do I take the money and put it on one account?

You can't merge Apple IDs. What you could do is set up your phone to use the same iCloud accout you are using on your Mac. To do this, go to Settings>iCloud and turn all synced data (Contacts, Calendars, etc.) to Off. When prompted, choose to keep the data on the phone. When everything is off, scroll to the bottom and tap Delete Account. Now add the iCloud account you set up on your Mac (with the same Apple ID) and turn syncing back on for Calendars, Contacts, etc. When prompted, you will probably want to choose merge, to merge the data on your phone with the existing data on this iCloud account.

I have just changed my computer as my old one died... but now cannot access my old itunes account so i have set up a new one with another email address. how can I sync my ipod to my new computer without wiping all my music ?

I have just tried to sync my ipod to a new computer as my old one died but as I cannot remember my previous log in I created a new itunes account. I now want to sync but it says it will wipe my music off my ipod. Does anyone know how I can do this now ?

If you have purchases on your iPod Shuffle that you want to sync back to iTunes, but are under the Apple ID you no longer have access to, you'll need to reset that account information. You can use this link to reset your password.
https://iforgot.apple.com/
If that doesn' work or help, you'll need to contact iTunes support and have them walk you through the process of resetting the older account information. Once you know the email and password again, you can authorize your new computer and transfer any purchases from this account back to iTunes.
For all non-iTunes purchased content, you'll need to the assistance of some sort of third party software that is not supported by Apple. See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock
B-rock

I now have 5 devices that access the "cloud" via Match. I also have 3 computers that need to be authorized. Is there a way to authorize all these computers/devices in such a way to allow everything to access and sync to the cloud?

I now have 5 devices that access the "cloud" via Match. I also have 3 computers that need to be authorized. Is there a way to authorize all these computers/devices in such a way to allow everything to access and sync to the cloud?

I had a problem with a 5.0.3 project that would cause 5.0.4 to crash. Apple asked for a copy of the project and later told me it was because there were some empty text layers. Apple is aware of the issue and is working on a fix.
In my case I still had 5.0.3 on another Mac and could clean up the project. If empty text layers might be the problem, do you know someone with an earlier version who could open it and remove the empty layers? I'd be willing to give it a try if you'd want to send me the project.
Ross Hunter

Do i now have access to fibre optic?

Similar Messages

Maybe you are looking for